SY89531LHZ - 3.3V Programmable Clock Synthesizer | Microchip
MPN: SY89531LHZ ✗ Son Kullanım ZamanıSY89531LHZ Genel Bakış
A clock synthesizer is a clock-and-timing integrated circuit that derives one or more precise output frequencies from a stable reference source. Clock generators and phase-locked loops belong to the broader timing-control hierarchy, which includes clock buffers, jitter cleaners, frequency dividers, and clock distribution devices. These components are used to create, multiply, divide, buffer, and translate clock signals in communication equipment, servers, industrial controllers, test equipment, and high-speed computing platforms.
The SY89531LHZ provides a 3.3V ±10% power supply, cycle-to-cycle jitter below 50ps, and pin-to-pin skew below 50ps. Its output range extends from 33MHz to 500MHz, while the direct crystal interface accepts references from 14MHz to 18MHz. TTL/CMOS-compatible control logic allows programming and operating-state control through a conventional digital interface. The combination of synthesis, fanout, drive, translation, and jitter-cleaning functions reduces the number of separate timing components required in a multi-clock design.
The integrated architecture is intended to produce related clocks from a common source while maintaining tight timing relationships between outputs. HSTL and LVPECL translation permits the clock network to interface with logic using incompatible voltage and signal conventions. Because these are high-speed differential or translated clock outputs, trace geometry, return paths, output termination, decoupling, and connector or package transitions require careful implementation to prevent added skew, reflections, and edge degradation.
Typical uses include telecommunications line cards, network switches, serial links, server clock trees, instrumentation, and industrial test systems. The device is also suitable for FPGA or ASIC clocking where several related frequencies must be generated from one crystal reference. The 500MHz capability supports demanding digital logic, while the sub-50ps timing characteristics help preserve margin in demanding source-synchronous or parallel interfaces.
Designers should use the manufacturer pin-description table when assigning package connections and should preserve the recommended crystal, decoupling, and output-termination networks. The exposed thermal pad requires an appropriate PCB thermal strategy, particularly when adjacent high-speed circuitry increases ambient temperature or board-level power density. Because this is an obsolete catalog device, new production designs should confirm availability and lifecycle status before committing to a volume build.
This product summary consolidates the device's principal timing parameters, package information, cross-reference candidates, and engineering considerations into a design-oriented reference. It also distinguishes the tray-packaged SY89531LHZ from the separate -TR tape-and-reel ordering code and helps engineers verify footprint, output type, frequency range, and replacement requirements before schematic capture or PCB release.
Drop-in alternatifler için SY89531LHZ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
SY89538LHH-TR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
SY89529LTH-TR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
SY89531LHZ Özellikler
| Product Type | Programmable clock synthesizer and jitter cleaner |
| Besleme Gerilimi | 3.3 V ±10% |
| Crystal Input Frequency Range | 14 MHz to 18 MHz |
| Output Frequency Range | 33 MHz to 500 MHz |
| Cycle-to-Cycle Jitter | <50 ps |
| Pin-to-Pin Skew | <50 ps |
| Çıkış Türü | LVPECL/HSTL |
| Control Logic | TTL/CMOS-compatible |
| Integrated Functions | Synthesizer, fanout buffers, clock drivers, and clock translator |
| Crystal Interface | Direct crystal interface |
| Paket | 64-pin TQFP with exposed pad |
| Montaj Türü | Surface mount |
SY89531LHZ 64-pin tqfp with exposed pad Pin Yapısı Kılavuzu
SY89531LHZ (64-pin tqfp with exposed pad paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: SY89531LHZ.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
SY89531LHZ için uygundur 6 uygulamas: Telecommunications Line Cards, Network Switching Equipment, FPGA and ASIC Clock Distribution, High-Speed Server Clock Trees, Industrial Test and Measurement, High-Speed Serial Interface Timing.
Telecommunications Line Cards
The SY89531LHZ fits telecommunications line-card clock trees that require several related high-speed clocks from one stable reference. Its direct 14MHz to 18MHz crystal interface supports a conventional source arrangement, while the 33MHz to 500MHz output range covers processor, serializer, and data-path clocking requirements. Cycle-to-cycle jitter below 50ps and pin-to-pin skew below 50ps help preserve timing margin in demanding communication equipment. HSTL and LVPECL outputs allow clock distribution into logic designed for those signal standards, and the integrated fanout buffers and drivers reduce the need for separate clock components. Layout must preserve return paths and apply the output termination specified by the manufacturer.
Önerilen
Network Switching Equipment
The SY89531LHZ is appropriate for network-switch clock trees where related frequencies must be distributed with tight skew to multiple processing and serial-interface blocks. The device can derive 33MHz to 500MHz outputs from a 14MHz to 18MHz crystal source, combining synthesis, fanout, clock driving, and translation in one 64-pin TQFP. This integration simplifies the component count compared with a design using separate synthesizer and output-driver stages. The sub-50ps cycle-to-cycle jitter specification supports high-speed data paths, while sub-50ps pin-to-pin skew limits relative displacement among related outputs. The 3.3V ±10% supply requirement and exposed thermal pad should be incorporated into the power and ground-plane design.
Önerilen
FPGA and ASIC Clock Distribution
The SY89531LHZ can supply programmable clocks to FPGA or ASIC clock domains when the board requires several related frequencies from a common crystal source. Its output range of 33MHz to 500MHz covers many fabric, interface, and processor clock requirements, while the integrated synthesizer and fanout stages simplify clock-tree construction. TTL/CMOS-compatible control logic allows the system controller to configure and manage the device, and LVPECL or HSTL outputs provide compatibility with high-speed clock networks. Pin-to-pin skew below 50ps is useful when multiple clock domains must remain closely aligned. The engineer must still verify the receiving logic's input standard, termination network, input threshold, and required clock topology.
Önerilen
High-Speed Server Clock Trees
The SY89531LHZ is suited to server and accelerator boards that need precise, related clocks for memory interfaces, fabric logic, and high-speed serial links. Deriving clocks from one 14MHz to 18MHz crystal reference can improve source consistency, while the 33MHz to 500MHz output range provides broad design coverage. Jitter below 50ps helps maintain edge-quality margin, and HSTL/LVPECL outputs support clock distribution over controlled printed-circuit-board paths. Because the device is obsolete, engineers should also assess current availability and consider a currently supported family member if long-term production continuity is more important than retaining the original 64-pin TQFP layout.
Önerilen
Industrial Test and Measurement
The SY89531LHZ fits instrumentation and industrial test systems that generate multiple deterministic clock sources for acquisition, conversion, and control subsystems. A 14MHz to 18MHz crystal reference and a programmable output range of 33MHz to 500MHz allow one device to support multiple sampling or digital-interface rates. The integrated clock translator and driver stages simplify adaptation between the synthesizer and HSTL or LVPECL receiving circuits. Low pin-to-pin skew below 50ps is valuable when several instrument channels must observe closely related timing events. Designers should keep clock traces short, maintain continuous reference planes, use appropriate series termination, and isolate noisy switching nodes from the reference and clock distribution paths.
Önerilen
High-Speed Serial Interface Timing
The SY89531LHZ can provide reference or forwarded clocks for high-speed serial interfaces requiring low jitter and controlled skew. Its cycle-to-cycle jitter below 50ps supports cleaner edge timing than a general-purpose divided clock arrangement, while the 33MHz to 500MHz output range covers many legacy source-synchronous interface rates. The integrated synthesizer, fanout buffers, drivers, and translators allow a compact clock network with fewer external components. HSTL or LVPECL output selection should match the line receiver, and the physical implementation should account for loss, reflections, and crosstalk. Validate the complete eye, jitter-budget, and timing-margin chain on the assembled board rather than relying only on the oscillator specification.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: SY89531LHZ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | SY89538LHH-TR | SY89529LTH-TR |
|---|---|---|---|
| Package | 64-pin TQFP with exposed pad | TQFP-64 | TQFP-64 |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Product Type | Clock synthesizer / jitter cleaner | Clock generator, PLL, frequency synthesizer | Clock generator, PLL, frequency synthesizer |
| Lifecycle Status | Obsolete | Obsolete | Obsolete |
Ana Farklılayıcılar
- Combines synthesis, fanout, driving, and translation in one clock IC (karşılaştırma:SY89538LHH-TR)
- Supports a broad 500MHz maximum output frequency (karşılaştırma:SY89529LTH-TR)
- Low timing-distortion characteristics for multi-clock systems (karşılaştırma:SY89538LHH-TR)
- Supports both HSTL and LVPECL clock standards (karşılaştırma:SY89529LTH-TR)
Tasarım Notları
Route crystal, reference, and clock-output paths with short, direct connections and continuous ground references. Place the crystal and its load components close to the device, keep the crystal loop compact, and avoid routing fast clock outputs beneath or beside high-energy switching nodes. Maintain the manufacturer's recommended spacing between clock outputs when their relative skew is important.
Terminate LVPECL and HSTL outputs according to the receiver's recommended topology and the device's application schematic. High-speed edges can reflect on imperfectly terminated PCB traces, so use controlled-impedance routing, minimize stub lengths, and verify the clock waveform at the load. Series damping and output termination values should be selected from the manufacturer's reference design rather than guessed.
The 64-pin TQFP includes an exposed pad that must be tied to the appropriate ground plane and connected with thermal vias according to the manufacturer's land pattern. Use substantial uninterrupted copper where board space permits. The catalog excerpt does not state thermal resistance or maximum junction temperature, so thermal qualification should be completed with the full datasheet and the actual airflow and ambient conditions.
Decouple the 3.3V supply close to the device and keep high-current return paths away from the crystal and clock-reference area. The supported supply tolerance is 3.3V ±10%, which establishes a 2.97V to 3.63V operating range. Verify sequencing and startup behavior for every clock domain because incorrect power order can create transient output states or inconsistent device operation.
Uyumluluk Bilgisi
The available product records do not state the requested compliance or qualification statuses. The Mouser listing describes the device as green, but that description is not sufficient to assign a specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals classification.