Microchip Technology

SY89531LHZ - 3.3V Programmable Clock Synthesizer | Microchip

MPN: SY89531LHZ ✗ Akhir Hayat
3.3 V ±10% Vdss 64-pin TQFP with exposed pad Package 14 MHz to 18 MHz Speed
MOQ: 1 |

SY89531LHZ Ringkasan

The Microchip Technology SY89531LHZ is a 3.3V programmable clock synthesizer and jitter-cleaning clock generator with a 14MHz to 18MHz crystal input interface and a 33MHz to 500MHz output-frequency range. The device combines an integrated synthesizer, fanout buffers, clock drivers, and clock translators in one 64-pin TQFP package with an exposed pad. Its HSTL and LVPECL outputs support high-speed digital systems requiring multiple synchronized clock domains.

A clock synthesizer is a clock-and-timing integrated circuit that derives one or more precise output frequencies from a stable reference source. Clock generators and phase-locked loops belong to the broader timing-control hierarchy, which includes clock buffers, jitter cleaners, frequency dividers, and clock distribution devices. These components are used to create, multiply, divide, buffer, and translate clock signals in communication equipment, servers, industrial controllers, test equipment, and high-speed computing platforms.

The SY89531LHZ provides a 3.3V ±10% power supply, cycle-to-cycle jitter below 50ps, and pin-to-pin skew below 50ps. Its output range extends from 33MHz to 500MHz, while the direct crystal interface accepts references from 14MHz to 18MHz. TTL/CMOS-compatible control logic allows programming and operating-state control through a conventional digital interface. The combination of synthesis, fanout, drive, translation, and jitter-cleaning functions reduces the number of separate timing components required in a multi-clock design.

The integrated architecture is intended to produce related clocks from a common source while maintaining tight timing relationships between outputs. HSTL and LVPECL translation permits the clock network to interface with logic using incompatible voltage and signal conventions. Because these are high-speed differential or translated clock outputs, trace geometry, return paths, output termination, decoupling, and connector or package transitions require careful implementation to prevent added skew, reflections, and edge degradation.

Typical uses include telecommunications line cards, network switches, serial links, server clock trees, instrumentation, and industrial test systems. The device is also suitable for FPGA or ASIC clocking where several related frequencies must be generated from one crystal reference. The 500MHz capability supports demanding digital logic, while the sub-50ps timing characteristics help preserve margin in demanding source-synchronous or parallel interfaces.

Designers should use the manufacturer pin-description table when assigning package connections and should preserve the recommended crystal, decoupling, and output-termination networks. The exposed thermal pad requires an appropriate PCB thermal strategy, particularly when adjacent high-speed circuitry increases ambient temperature or board-level power density. Because this is an obsolete catalog device, new production designs should confirm availability and lifecycle status before committing to a volume build.

This product summary consolidates the device's principal timing parameters, package information, cross-reference candidates, and engineering considerations into a design-oriented reference. It also distinguishes the tray-packaged SY89531LHZ from the separate -TR tape-and-reel ordering code and helps engineers verify footprint, output type, frequency range, and replacement requirements before schematic capture or PCB release.

Pilihan pengganti yang segera untuk SY89531LHZ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

SY89538LHH-TR

✅ Masuk Drop-In
📦 TQFP-64
Same obsolete Precision Edge clock-generator family; detailed output and control-pin differences are not quantified in the comparison record

📋 Alternatif rujukan (tidak dalam katalog)

SY89529LTH-TR

✅ Masuk Drop-In
📦 TQFP-64
Same obsolete Precision Edge clock-generator family; detailed output and control-pin differences are not quantified in the comparison record

📋 Alternatif rujukan (tidak dalam katalog)

SY89531LHZ Spesifikasi

Product Type Programmable clock synthesizer and jitter cleaner
Tegangan Pemberi Arus 3.3 V ±10%
Crystal Input Frequency Range 14 MHz to 18 MHz
Output Frequency Range 33 MHz to 500 MHz
Cycle-to-Cycle Jitter <50 ps
Pin-to-Pin Skew <50 ps
Jenis Output LVPECL/HSTL
Control Logic TTL/CMOS-compatible
Integrated Functions Synthesizer, fanout buffers, clock drivers, and clock translator
Crystal Interface Direct crystal interface
Kemasan 64-pin TQFP with exposed pad
Jenis Pemasangan Surface mount

Panduan Konfigurasi Pin SY89531LHZ 64-pin tqfp with exposed pad

Konfigurasi pin untuk SY89531LHZ (64-pin tqfp with exposed pad pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 64-pin tqfp with exposed pad untuk SY89531LHZ

Tiada data garisan pin yang diperoleh untuk SY89531LHZ.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

SY89531LHZ patut untuk 6 aplikasis: Telecommunications Line Cards, Network Switching Equipment, FPGA and ASIC Clock Distribution, High-Speed Server Clock Trees, Industrial Test and Measurement, High-Speed Serial Interface Timing.

🌐

Telecommunications Line Cards

The SY89531LHZ fits telecommunications line-card clock trees that require several related high-speed clocks from one stable reference. Its direct 14MHz to 18MHz crystal interface supports a conventional source arrangement, while the 33MHz to 500MHz output range covers processor, serializer, and data-path clocking requirements. Cycle-to-cycle jitter below 50ps and pin-to-pin skew below 50ps help preserve timing margin in demanding communication equipment. HSTL and LVPECL outputs allow clock distribution into logic designed for those signal standards, and the integrated fanout buffers and drivers reduce the need for separate clock components. Layout must preserve return paths and apply the output termination specified by the manufacturer.

🌐

Network Switching Equipment

The SY89531LHZ is appropriate for network-switch clock trees where related frequencies must be distributed with tight skew to multiple processing and serial-interface blocks. The device can derive 33MHz to 500MHz outputs from a 14MHz to 18MHz crystal source, combining synthesis, fanout, clock driving, and translation in one 64-pin TQFP. This integration simplifies the component count compared with a design using separate synthesizer and output-driver stages. The sub-50ps cycle-to-cycle jitter specification supports high-speed data paths, while sub-50ps pin-to-pin skew limits relative displacement among related outputs. The 3.3V ±10% supply requirement and exposed thermal pad should be incorporated into the power and ground-plane design.

🖥️

FPGA and ASIC Clock Distribution

The SY89531LHZ can supply programmable clocks to FPGA or ASIC clock domains when the board requires several related frequencies from a common crystal source. Its output range of 33MHz to 500MHz covers many fabric, interface, and processor clock requirements, while the integrated synthesizer and fanout stages simplify clock-tree construction. TTL/CMOS-compatible control logic allows the system controller to configure and manage the device, and LVPECL or HSTL outputs provide compatibility with high-speed clock networks. Pin-to-pin skew below 50ps is useful when multiple clock domains must remain closely aligned. The engineer must still verify the receiving logic's input standard, termination network, input threshold, and required clock topology.

🖥️

High-Speed Server Clock Trees

The SY89531LHZ is suited to server and accelerator boards that need precise, related clocks for memory interfaces, fabric logic, and high-speed serial links. Deriving clocks from one 14MHz to 18MHz crystal reference can improve source consistency, while the 33MHz to 500MHz output range provides broad design coverage. Jitter below 50ps helps maintain edge-quality margin, and HSTL/LVPECL outputs support clock distribution over controlled printed-circuit-board paths. Because the device is obsolete, engineers should also assess current availability and consider a currently supported family member if long-term production continuity is more important than retaining the original 64-pin TQFP layout.

🔧

Industrial Test and Measurement

The SY89531LHZ fits instrumentation and industrial test systems that generate multiple deterministic clock sources for acquisition, conversion, and control subsystems. A 14MHz to 18MHz crystal reference and a programmable output range of 33MHz to 500MHz allow one device to support multiple sampling or digital-interface rates. The integrated clock translator and driver stages simplify adaptation between the synthesizer and HSTL or LVPECL receiving circuits. Low pin-to-pin skew below 50ps is valuable when several instrument channels must observe closely related timing events. Designers should keep clock traces short, maintain continuous reference planes, use appropriate series termination, and isolate noisy switching nodes from the reference and clock distribution paths.

📡

High-Speed Serial Interface Timing

The SY89531LHZ can provide reference or forwarded clocks for high-speed serial interfaces requiring low jitter and controlled skew. Its cycle-to-cycle jitter below 50ps supports cleaner edge timing than a general-purpose divided clock arrangement, while the 33MHz to 500MHz output range covers many legacy source-synchronous interface rates. The integrated synthesizer, fanout buffers, drivers, and translators allow a compact clock network with fewer external components. HSTL or LVPECL output selection should match the line receiver, and the physical implementation should account for loss, reflections, and crosstalk. Validate the complete eye, jitter-budget, and timing-margin chain on the assembled board rather than relying only on the oscillator specification.

Ringkasan Produk Disebarkan

SY89538LHH-TR Same-family Precision Edge clock-generation candidate Dipergunakan di: Telecommunications Line Cards, Network Switching Equipment, FPGA and ASIC Clock Distribution, High-Speed Server Clock Trees, Industrial Test and Measurement, High-Speed Serial Interface Timing SY89529LTH-TR Same-family Precision Edge clock-generation candidate Dipergunakan di: Telecommunications Line Cards, Network Switching Equipment, FPGA and ASIC Clock Distribution, High-Speed Server Clock Trees, Industrial Test and Measurement, High-Speed Serial Interface Timing
What is the SY89531LHZ?
The SY89531LHZ is a Microchip Technology 3.3V programmable clock synthesizer and jitter cleaner designed for clock generation, fanout, driving, and signal translation. It accepts a 14MHz to 18MHz crystal reference and produces output frequencies from 33MHz to 500MHz using HSTL and LVPECL interfaces. The integrated 64-pin TQFP package includes an exposed pad for board-level thermal management.
What are the key specifications of SY89531LHZ that engineers should know?
The principal SY89531LHZ specifications are a 3.3V ±10% supply, a 14MHz to 18MHz crystal-input range, and a 33MHz to 500MHz output-frequency range. Its cycle-to-cycle jitter is below 50ps and pin-to-pin skew is below 50ps. The device provides LVPECL and HSTL outputs, TTL/CMOS-compatible control logic, and integrated synthesizer, fanout-buffer, clock-driver, and clock-translator functions.
What clock frequency range does SY89531LHZ support?
The SY89531LHZ supports output frequencies from 33MHz to 500MHz and accepts a direct crystal reference between 14MHz and 18MHz. According to the Micrel family datasheet, the architecture also includes fanout buffers, clock drivers, and translators. This makes the device suitable for generating several related clocks for high-speed digital, communication, test, and processor systems.
Where can I download the SY89531LHZ datasheet PDF?
The SY89531LHZ family datasheet can be opened through the Microchip-sourced PDF at https://www.datasheets.com/microchip/sy89531lhz/datasheet.pdf. The document contains the device description and timing characteristics. Before making a PCB or firmware decision, consult its pin-description and recommended-application sections because a complete pin list is not reproduced on this page.
Where can I find the SY89531LHZ pinout?
The SY89531LHZ pin assignment is shown in the manufacturer's 64-pin TQFP pin-description table and is associated with the family datasheet at https://www.datasheets.com/microchip/sy89531lhz/datasheet.pdf. Use that table to identify power, ground, crystal, programming, control, and LVPECL/HSTL output connections before laying out the board.
Is SY89531LHZ suitable for FPGA and ASIC clocking?
The SY89531LHZ is suitable for FPGA and ASIC clock trees when the design needs related clocks generated from one 14MHz to 18MHz crystal reference. Its 33MHz to 500MHz output range covers many digital logic requirements, while HSTL and LVPECL outputs support high-speed clock distribution. The device must still be checked against the target device's required clock standard, voltage, and topology.
What is the difference between SY89531LHZ and SY89538LHH-TR?
The SY89531LHZ and SY89538LHH-TR are both obsolete Microchip Precision Edge clock-generation devices, but the available comparison record does not expose enough detailed operating values to claim identical pin compatibility. Both belong to the same broader family and are associated with TQFP-class packaging, but engineers should verify the complete pin list, output configuration, and frequency limits against the individual datasheets before substitution.
What is the difference between SY89531LHZ and SY89529LTH?
The SY89531LHZ and SY89529LTH are both obsolete Microchip Precision Edge clock/frequency synthesizers, but the cross-reference record does not establish every electrical parameter or confirm pin-to-pin compatibility. The target device is identified as a 64-pin TQFP synthesizer with LVPECL/HSTL outputs and a 33MHz to 500MHz output range. A substitution should therefore be validated against output counts, control pins, supply requirements, and package geometry.
When should I choose SY89531LHZ over another Precision Edge clock synthesizer?
Choose the SY89531LHZ when the design specifically needs its 33MHz to 500MHz output range, sub-50ps cycle-to-cycle jitter, sub-50ps pin-to-pin skew, direct 14MHz to 18MHz crystal interface, and HSTL/LVPECL translation in a 64-pin TQFP. Select another family member when its output configuration, voltage, frequency range, or control interface better matches the target clock tree and when its complete pinout has been verified.
Is SY89531LHZ the same as SY89538LHH-TR?
The SY89531LHZ is not automatically interchangeable with SY89538LHH-TR even though both are obsolete Microchip Precision Edge clock devices. The available family comparison does not prove identical pin functions, output-channel arrangements, or all operating limits. Treat it as a candidate replacement and verify the manufacturer pin tables, power rails, clock-output configuration, control interface, and package footprint before approving a drop-in substitution.
What can replace SY89531LHZ?
SY89538LHH-TR and SY89529LTH-TR are the closest documented same-brand replacement candidates for the SY89531LHZ because they appear in direct comparison records for the obsolete Precision Edge family. Their availability as drop-in replacements still depends on matching the 64-pin footprint, crystal connection, programming interface, supply requirements, and HSTL/LVPECL output arrangement. Use the Request a Quote form on this page to discuss sourcing and qualification.
What is the best Microchip equivalent for SY89531LHZ?
The best documented Microchip candidate is selected from the Precision Edge family by matching the complete device configuration rather than the family name alone. SY89538LHH-TR and SY89529LTH-TR are documented comparison candidates, while the SY89531LHZ-TR ordering code represents the tape-and-reel form of the target device rather than a different electrical design. The correct equivalent must retain the required outputs, control interface, and pin functions.
Where to buy SY89531LHZ online?
Use the Request a Quote form on this page to request the exact SY89531LHZ ordering code, tray packaging, current availability, and lead time. The target is an obsolete Microchip catalog part, so inventory can be limited and fragmented. Provide the required quantity and assembly packaging so the quote can be matched to the appropriate tray, tape-and-reel, or other agreed shipment format.
What is the price of SY89531LHZ?
The current commercial price for SY89531LHZ should be requested through the Request a Quote form on this page because the part is obsolete and its cost can vary with quantity, condition, traceable documentation, and shipment format. The form is the appropriate route for obtaining a current quote without relying on a stale catalog figure that may no longer represent available inventory.
What is the lead time for SY89531LHZ?
The current lead time for SY89531LHZ should be confirmed through the Request a Quote form on this page. As an obsolete clock-generation IC, availability may depend on remaining factory or channel inventory rather than a standard production schedule. Include the required quantity, target date, and acceptable packaging in the request so procurement can respond with a realistic supply commitment.
Is SY89531LHZ in stock?
Current stock for SY89531LHZ should be confirmed through the Request a Quote form on this page. The manufacturer and distributor records identify the part as obsolete, so apparent inventory listings may represent limited quantities rather than ongoing production stock. Submit the required quantity and any traceability or date-code requirements to obtain an availability and lead-time response.
Does the SY89531LHZ require a heatsink?
The SY89531LHZ uses a 64-pin TQFP package with an exposed pad, so its PCB thermal design should provide a low-resistance path into the ground plane. The exact requirement for a separate heatsink depends on ambient temperature, clock-output loading, board construction, and adjacent heat sources, which are not specified by the catalog data. Use the exposed-pad land pattern and thermal-via guidance in the manufacturer layout documentation.

Data referensi kejuruteraan untuk SY89531LHZ — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the SY89531LHZ when an existing 64-pin TQFP clock design specifically depends on its 33MHz to 500MHz output range, direct 14MHz to 18MHz crystal interface, HSTL/LVPECL outputs, and sub-50ps jitter and skew limits. SY89538LHH-TR is a same-family candidate when its exact output configuration and control interface match the installed design; SY89529LTH-TR is another candidate for review against the complete pinout. Do not approve either alternative solely because it belongs to the Precision Edge family: verify crystal pins, supply rails, programming signals, output count, output standards, and exposed-pad geometry. Because the target and documented alternatives are obsolete, choose the original ordering code when maintaining an existing production design, but evaluate a currently supported clock generator when long-term availability, qualification status, or a redesigned PCB is acceptable.

Perbandingan dengan Gantian

Parametr Produk Ini SY89538LHH-TR SY89529LTH-TR
Package 64-pin TQFP with exposed pad TQFP-64 TQFP-64
Brand Microchip Technology Microchip Technology Microchip Technology
Product Type Clock synthesizer / jitter cleaner Clock generator, PLL, frequency synthesizer Clock generator, PLL, frequency synthesizer
Lifecycle Status Obsolete Obsolete Obsolete

Penyeberangsung Jelas

  • Combines synthesis, fanout, driving, and translation in one clock IC (vsSY89538LHH-TR)
  • Supports a broad 500MHz maximum output frequency (vsSY89529LTH-TR)
  • Low timing-distortion characteristics for multi-clock systems (vsSY89538LHH-TR)
  • Supports both HSTL and LVPECL clock standards (vsSY89529LTH-TR)

Catatan Desain

Route crystal, reference, and clock-output paths with short, direct connections and continuous ground references. Place the crystal and its load components close to the device, keep the crystal loop compact, and avoid routing fast clock outputs beneath or beside high-energy switching nodes. Maintain the manufacturer's recommended spacing between clock outputs when their relative skew is important.

Terminate LVPECL and HSTL outputs according to the receiver's recommended topology and the device's application schematic. High-speed edges can reflect on imperfectly terminated PCB traces, so use controlled-impedance routing, minimize stub lengths, and verify the clock waveform at the load. Series damping and output termination values should be selected from the manufacturer's reference design rather than guessed.

The 64-pin TQFP includes an exposed pad that must be tied to the appropriate ground plane and connected with thermal vias according to the manufacturer's land pattern. Use substantial uninterrupted copper where board space permits. The catalog excerpt does not state thermal resistance or maximum junction temperature, so thermal qualification should be completed with the full datasheet and the actual airflow and ambient conditions.

Decouple the 3.3V supply close to the device and keep high-current return paths away from the crystal and clock-reference area. The supported supply tolerance is 3.3V ±10%, which establishes a 2.97V to 3.63V operating range. Verify sequencing and startup behavior for every clock domain because incorrect power order can create transient output states or inconsistent device operation.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The available product records do not state the requested compliance or qualification statuses. The Mouser listing describes the device as green, but that description is not sufficient to assign a specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals classification.

Data disahkan pada: 2026-11-16 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

SY89531LHZ datasheet SY89531LHZ datasheet pdf SY89531LHZ pinout SY89531LHZ specifications SY89531LHZ equivalent SY89531LHZ replacement SY89531LHZ vs SY89538LHH SY89531LHZ vs SY89529LTH Microchip SY89531LHZ SY89531LHZ TQFP-64 pinout SY89531LHZ 500MHz clock synthesizer SY89531LHZ price SY89531LHZ stock SY89531LHZ footprint SY89531LHZ application circuit

Komponen dan Tanda berkaitan

Microchip Technology Micrel Semiconductor SY89531LHZ SY89538LHH-TR SY89529LTH-TR clock synthesizer clock generator jitter cleaner frequency synthesizer phase-locked loop clock and timing IC integrated circuit semiconductor LVPECL HSTL TTL CMOS TQFP-64 surface mount crystal oscillator fanout buffer clock driver clock translator cycle-to-cycle jitter pin-to-pin skew
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ