TAS5162DKD 2x210W Stereo Class-D Power Stage | Texas Instruments
MPN: TAS5162DKD ✓ AktifTAS5162DKD Genel Bakış
A Class-D audio power stage is a switching amplifier topology that efficiently converts PWM signals into high-current audio outputs. Compared with a linear amplifier, the Class-D architecture places the active device in the saturation and cutoff regions, reducing conduction dissipation and supporting high output power in a compact package. The TAS5162 integrates the stereo output stage, protection functions, and digital control interfaces required by powered speakers and multi-channel audio systems.
Key capabilities include 210 W per channel into a 6 ohm bridge-tied load at 10% THD+N, operation across a 0 V to 52.5 V supply range, and an improved protection system. The device is suitable for professional audio, consumer audio, home-theater equipment, powered speakers, and compact subwoofer systems. Its integrated digital power-stage architecture simplifies the output path while retaining flexible signal-control and fault-reporting functions.
The TAS5162 accepts a PWM input signal and drives each output as a bridge-tied load, eliminating the need for output coupling capacitors when the specified load arrangement is used. Its integrated protection system is intended to improve reliability under normal overload and fault conditions. The exposed thermal pad must be connected to a suitable thermal and ground plane so heat can leave the package efficiently during high-power operation.
Typical applications include 210 W stereo speaker amplifiers, bridged mono installations, powered bookshelf and floor-standing speakers, home-theater receivers, professional powered speakers, and subwoofer amplifiers. The 52.5 V maximum supply supports high rail voltage, but the power stage still requires careful thermal design, low-impedance PCB routing, suitable output filtering, and protection against transient overvoltage.
The most important design consideration is power delivery at low impedance. Output-current capability, copper width, connector sizing, heat spreading, and the thermal resistance of the exposed pad all influence whether the amplifier can sustain its rated output continuously. Use the manufacturer power-stage application guidance and thermal data when selecting the power-supply capability, output filter, copper area, and enclosure ventilation.
This product page consolidates the key TAS5162DKD specifications, package information, application guidance, sourcing path, and replacement assessment into one engineering-focused reference. It also identifies where additional datasheet data, pin-level details, and qualified alternatives are required before a board-level design is released.
Drop-in alternatifler için TAS5162DKD — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinTAS5162DKD Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | Integrated stereo digital Class-D audio amplifier power stage |
| Channel Configuration | 2 channels |
| Maximum Output Power per Channel | 210 W into 6 ohm BTL at 10% THD+N |
| Stereo Output Power | 2 x 210 W |
| Supply Voltage Range | 0 V to 52.5 V |
| Input Signal Type | PWM |
| Çıkış Konfigürasyonu | Bridge-tied load (BTL) |
| Protection System | Integrated improved protection system |
| Paket | 36-pin HSSOP with exposed pad |
| Package Width | 11.00 mm |
| Montaj Türü | Surface mount |
| Thermal Pad | Exposed pad |
| SD Output Internal Pullup | 3.3 V |
| OTW Output Internal Pullup | 3.3 V |
| Logic Output Pullup Support | External pullup resistors can support 5 V logic |
TAS5162DKD 11.00 mm Pin Yapısı Kılavuzu
TAS5162DKD (11.00 mm paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: TAS5162DKD.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
TAS5162DKD için uygundur 6 uygulamas: High-Power Stereo Speaker Amplifier, Powered Bookshelf and Floor-Standing Speakers, Home-Theater Multi-Channel Power Stage, Professional Powered Speaker, Compact Subwoofer Amplifier, Digital Active Speaker Crossover.
High-Power Stereo Speaker Amplifier
The TAS5162DKD fits a high-power stereo speaker amplifier because it can deliver up to 210 W per channel into a 6 ohm bridge-tied load at 10% THD+N. The device accepts PWM input and uses an exposed-pad HSSOP package that must be thermally coupled to a substantial PCB ground plane. Designers should size the power supply and output wiring for the selected rail and load while validating the output filter and amplifier protection behavior under sustained full-power operation.
Powered Bookshelf and Floor-Standing Speakers
A powered bookshelf or floor-standing speaker can use the TAS5162DKD to generate high output power without a separate discrete output-transistor stage. Its two-channel PWM architecture supports balanced bridge-tied speaker drive, and the 0 V to 52.5 V supply range provides flexibility in class-D power-supply design. The exposed pad requires a carefully designed thermal copper area, while speaker impedance, crossover loading, and sustained output level must be checked before production release.
Home-Theater Multi-Channel Power Stage
The TAS5162DKD can serve as the stereo output stage in a home-theater receiver or powered-speaker chassis. Its two PWM-input channels reduce the analog output-driver section, while SD and OTW status outputs allow the system controller to coordinate shutdown and thermal events. In a multi-amplifier enclosure, power-supply isolation, grounding, thermal spacing, and output-filter validation become especially important because several power stages may share the same chassis.
Professional Powered Speaker
For professional powered speakers, the TAS5162DKD provides enough output capability for demanding 6 ohm bridge-tied loads while preserving a compact digital power-stage implementation. Up to 210 W per channel at 10% THD+N makes it relevant to stage monitors, installation speakers, and compact performance enclosures. Engineers should confirm continuous-output thermal performance, incorporate the manufacturer protection scheme, and verify the mechanical connector and wiring system for the intended speaker power.
Compact Subwoofer Amplifier
The TAS5162DKD can operate as a high-power bridged mono stage in a compact subwoofer amplifier, using the two output channels to drive one bridge-tied speaker load. Its PWM input works well with digital audio processing paths, and the 52.5 V maximum supply accommodates elevated class-D rail voltages. Low-frequency load behavior requires careful filter and stability review, along with thermal analysis for continuous subwoofer output and reinforced protection against startup and shutdown transients.
Digital Active Speaker Crossover
The TAS5162DKD is appropriate for an active crossover or digitally controlled loudspeaker when the amplifier receives a PWM drive signal for each output section. Its integrated stereo bridge-tied outputs can simplify the power-amplifier portion of a multi-way speaker while SD and OTW outputs support system monitoring. Channel allocation, signal polarity, filter crossover frequency, output loading, and independent protection must be validated as one complete signal-chain design.
Mühendislik referans verileri: TAS5162DKD — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Package | 36-pin HSSOP with exposed pad |
| Brand | Texas Instruments |
| Channel Configuration | 2 channels |
| Maximum Output Power per Channel | 210 W into 6 ohm BTL at 10% THD+N |
| Stereo Output Power | 2 x 210 W |
| Supply Voltage Range | 0 V to 52.5 V |
| Input Signal Type | PWM |
| Output Configuration | Bridge-tied load (BTL) |
| Protection System | Integrated improved protection system |
| Status Outputs | SD and OTW outputs with internal 3.3 V pullups |
Ana Farklılayıcılar
- High stereo output capability from an integrated PWM power stage (karşılaştırma:Lower-power Class-D power stages)
- Wide supply range for high-rail class-D designs (karşılaştırma:Typical low-voltage Class-D amplifiers)
- Integrated digital fault and shutdown signaling (karşılaştırma:Amplifiers without host-controlled status outputs)
Tasarım Notları
Use the exposed pad as the primary heat-spreading path. Place the device on an uninterrupted PCB ground plane with multiple thermal vias, following the manufacturer land-pattern guidance. Estimated: power dissipation equals the average stage loss from the power supply, and the resulting junction temperature must be checked against the package rating using the specified board and airflow conditions. Do not infer continuous 210 W per channel capability from headline power alone.
Keep high-current output and supply paths short, wide, and tightly coupled to their return paths. The six-ohm load can draw substantial current at high output power, so copper width, layer transitions, vias, connectors, and output inductors must be rated for the worst-case operating condition. Use the recommended output-filter layout from the TAS5162 data sheet to limit switching-node stress and maintain amplifier stability.
Design the supply for the full load at the highest permitted rail voltage while considering the amplifier's switching and conduction losses. Maintain suitable bulk and local decoupling at the power-stage pins, and route these capacitors using very low-inductance connections. Confirm the source, ground, and output impedances against the data-sheet recommendations before adding external capacitance or changing the protection scheme.
Do not treat SD or OTW as ordinary push-pull logic outputs. Both have internal pullups to 3.3 V, and external pullups to 5 V may be required for a 5 V logic host. Configure the controller to interpret the open-drain-style status correctly, define a safe response to overtemperature and shutdown events, and avoid choosing external resistor values that conflict with the electrical-characteristics table.
Uyumluluk Bilgisi
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements are present in the cited product information. Automotive qualification is not established by the presence of a 0 degrees C to 70 degrees C ordering listing.