Texas Instruments

TAS5162DKD 2x210W Stereo Class-D Power Stage | Texas Instruments

MPN: TAS5162DKD ✓ فعال
0 V to 52.5 V Vdss 36-pin HSSOP with exposed pad Package
حداقل سفارش: 1 |

TAS5162DKD نمای کلی

The Texas Instruments TAS5162DKD is a two-channel stereo digital Class-D audio amplifier power stage capable of delivering up to 210 W per channel into a 6 ohm bridge-tied load at 10% THD+N. It accepts a 0 V to 52.5 V supply, supports PWM input, and is packaged in a 36-pin HSSOP with an exposed pad.

A Class-D audio power stage is a switching amplifier topology that efficiently converts PWM signals into high-current audio outputs. Compared with a linear amplifier, the Class-D architecture places the active device in the saturation and cutoff regions, reducing conduction dissipation and supporting high output power in a compact package. The TAS5162 integrates the stereo output stage, protection functions, and digital control interfaces required by powered speakers and multi-channel audio systems.

Key capabilities include 210 W per channel into a 6 ohm bridge-tied load at 10% THD+N, operation across a 0 V to 52.5 V supply range, and an improved protection system. The device is suitable for professional audio, consumer audio, home-theater equipment, powered speakers, and compact subwoofer systems. Its integrated digital power-stage architecture simplifies the output path while retaining flexible signal-control and fault-reporting functions.

The TAS5162 accepts a PWM input signal and drives each output as a bridge-tied load, eliminating the need for output coupling capacitors when the specified load arrangement is used. Its integrated protection system is intended to improve reliability under normal overload and fault conditions. The exposed thermal pad must be connected to a suitable thermal and ground plane so heat can leave the package efficiently during high-power operation.

Typical applications include 210 W stereo speaker amplifiers, bridged mono installations, powered bookshelf and floor-standing speakers, home-theater receivers, professional powered speakers, and subwoofer amplifiers. The 52.5 V maximum supply supports high rail voltage, but the power stage still requires careful thermal design, low-impedance PCB routing, suitable output filtering, and protection against transient overvoltage.

The most important design consideration is power delivery at low impedance. Output-current capability, copper width, connector sizing, heat spreading, and the thermal resistance of the exposed pad all influence whether the amplifier can sustain its rated output continuously. Use the manufacturer power-stage application guidance and thermal data when selecting the power-supply capability, output filter, copper area, and enclosure ventilation.

This product page consolidates the key TAS5162DKD specifications, package information, application guidance, sourcing path, and replacement assessment into one engineering-focused reference. It also identifies where additional datasheet data, pin-level details, and qualified alternatives are required before a board-level design is released.

جایگزین‌های drop-in برای TAS5162DKD — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

TAS5162DKD حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Integrated stereo digital Class-D audio amplifier power stage
Channel Configuration 2 channels
Maximum Output Power per Channel 210 W into 6 ohm BTL at 10% THD+N
Stereo Output Power 2 x 210 W
Supply Voltage Range 0 V to 52.5 V
Input Signal Type PWM
پیکربندی خروجی Bridge-tied load (BTL)
Protection System Integrated improved protection system
بسته‌بندی 36-pin HSSOP with exposed pad
Package Width 11.00 mm
نوع نصب Surface mount
Thermal Pad Exposed pad
SD Output Internal Pullup 3.3 V
OTW Output Internal Pullup 3.3 V
Logic Output Pullup Support External pullup resistors can support 5 V logic

راهنمای پیکربندی پین TAS5162DKD 11.00 mm

پیکربندی پین برای TAS5162DKD (پکیج 11.00 mm). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 11.00 mm برای TAS5162DKD

داده پین‌آوت تفصیلی موجود نیست برای TAS5162DKD.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

TAS5162DKD مناسب است برای 6 کاربردs: High-Power Stereo Speaker Amplifier, Powered Bookshelf and Floor-Standing Speakers, Home-Theater Multi-Channel Power Stage, Professional Powered Speaker, Compact Subwoofer Amplifier, Digital Active Speaker Crossover.

🎧

High-Power Stereo Speaker Amplifier

The TAS5162DKD fits a high-power stereo speaker amplifier because it can deliver up to 210 W per channel into a 6 ohm bridge-tied load at 10% THD+N. The device accepts PWM input and uses an exposed-pad HSSOP package that must be thermally coupled to a substantial PCB ground plane. Designers should size the power supply and output wiring for the selected rail and load while validating the output filter and amplifier protection behavior under sustained full-power operation.

🔊

Powered Bookshelf and Floor-Standing Speakers

A powered bookshelf or floor-standing speaker can use the TAS5162DKD to generate high output power without a separate discrete output-transistor stage. Its two-channel PWM architecture supports balanced bridge-tied speaker drive, and the 0 V to 52.5 V supply range provides flexibility in class-D power-supply design. The exposed pad requires a carefully designed thermal copper area, while speaker impedance, crossover loading, and sustained output level must be checked before production release.

📺

Home-Theater Multi-Channel Power Stage

The TAS5162DKD can serve as the stereo output stage in a home-theater receiver or powered-speaker chassis. Its two PWM-input channels reduce the analog output-driver section, while SD and OTW status outputs allow the system controller to coordinate shutdown and thermal events. In a multi-amplifier enclosure, power-supply isolation, grounding, thermal spacing, and output-filter validation become especially important because several power stages may share the same chassis.

🎤

Professional Powered Speaker

For professional powered speakers, the TAS5162DKD provides enough output capability for demanding 6 ohm bridge-tied loads while preserving a compact digital power-stage implementation. Up to 210 W per channel at 10% THD+N makes it relevant to stage monitors, installation speakers, and compact performance enclosures. Engineers should confirm continuous-output thermal performance, incorporate the manufacturer protection scheme, and verify the mechanical connector and wiring system for the intended speaker power.

⚡

Compact Subwoofer Amplifier

The TAS5162DKD can operate as a high-power bridged mono stage in a compact subwoofer amplifier, using the two output channels to drive one bridge-tied speaker load. Its PWM input works well with digital audio processing paths, and the 52.5 V maximum supply accommodates elevated class-D rail voltages. Low-frequency load behavior requires careful filter and stability review, along with thermal analysis for continuous subwoofer output and reinforced protection against startup and shutdown transients.

📢

Digital Active Speaker Crossover

The TAS5162DKD is appropriate for an active crossover or digitally controlled loudspeaker when the amplifier receives a PWM drive signal for each output section. Its integrated stereo bridge-tied outputs can simplify the power-amplifier portion of a multi-way speaker while SD and OTW outputs support system monitoring. Channel allocation, signal polarity, filter crossover frequency, output loading, and independent protection must be validated as one complete signal-chain design.

What is the TAS5162DKD power rating?
The TAS5162DKD can deliver up to 210 W per channel into a 6 ohm bridge-tied load at 10% THD+N. According to the Texas Instruments TAS5162 data sheet, the device is a two-channel stereo digital Class-D amplifier power stage, making it suitable for high-power speaker and subwoofer systems. Continuous output capability still depends on supply voltage, load impedance, PCB thermal design, output filtering, and enclosure cooling.
What type of amplifier is TAS5162DKD?
The TAS5162DKD is an integrated stereo PWM-input Class-D audio amplifier power stage. Texas Instruments describes the TAS5162 as a high-performance digital amplifier power stage with an improved protection system. Its two outputs operate as bridge-tied loads, while integrated SD and OTW outputs provide shutdown and overtemperature-related status functions for system control.
What is the supply voltage range of TAS5162DKD?
The TAS5162DKD operates from a 0 V to 52.5 V supply according to the Texas Instruments TAS5162 product information. This wide supply range supports high-output power stages, including up to 210 W per channel into 6 ohms. The usable operating point still depends on the amplifier configuration, thermal conditions, output stage requirements, and protection scheme used in the final system.
Where can I download the TAS5162DKD datasheet PDF?
The official TAS5162 datasheet is available from Texas Instruments at https://www.ti.com/lit/gpn/TAS5162. The manufacturer product page at https://www.ti.com/product/TAS5162 provides ordering information, technical parameters, application documents, and quality information. Use these official documents for pin assignments, electrical limits, thermal information, output-filter recommendations, and application-circuit values before completing a design.
Where can I find the TAS5162DKD pinout?
The TAS5162DKD pinout is published in the pin-configuration section of the Texas Instruments TAS5162 data sheet. The component uses a 36-pin HSSOP package with an exposed pad, but the exposed-pad connection and individual signal names must be assigned from the manufacturer pin table. Use that table when making PCB land patterns, net assignments, thermal-pad connections, and schematic review.
Can TAS5162DKD drive 6 ohm speakers?
Yes, the TAS5162DKD can drive a 6 ohm bridge-tied load at up to 210 W per channel when operated at 10% THD+N under the specified test conditions. A speaker system must also satisfy the amplifier's supply, current, thermal, and protection requirements. Confirm the speaker impedance, connector rating, output filter, PCB current capacity, and enclosure thermal performance.
TAS5162DKD vs TAS5162DKDG4 - which is the better choice?
TAS5162DKD and TAS5162DKDG4 belong to the same Texas Instruments TAS5162 family, and the ordering-code difference primarily identifies the supplier or shipping configuration rather than a different amplifier topology. For a new PCB, select the orderable code confirmed for the required production channel, reel orientation, and labeling process. Do not substitute the ordering code without checking the manufacturer's ordering information and the assembled tape-and-reel orientation.
When should I choose TAS5162DKD instead of another Class-D power stage?
Choose the TAS5162DKD when the design needs a PWM-input, two-channel Class-D stage capable of up to 210 W per channel into 6 ohms and can implement its exposed-pad thermal layout. Select another device if the system requires a different input format, lower supply voltage, a smaller footprint, integrated analog input, higher efficiency under a different load, or a protection architecture not supported by the TAS5162.
What is the best drop-in replacement for TAS5162DKD?
No confirmed drop-in replacement can be named from the available manufacturer and cross-reference information without risking an invalid substitution. A valid replacement must match the 36-pin HSSOP footprint, pin assignments, PWM input interface, supply range, output-stage ratings, protection functions, and thermal requirements. Use the Texas Instruments cross-reference search or manufacturer technical support for an authoritative sourcing decision.
Can another TI amplifier replace TAS5162DKD on the same PCB?
Do not assume that another TI audio amplifier can replace TAS5162DKD on an existing PCB. A true drop-in candidate must preserve the 36-pin HSSOP land pattern, expose the same PWM, ground, power, feedback, and fault-signal functions, and remain within the required electrical and thermal limits. Review the complete pin table and maximum ratings before treating any alternative as interchangeable.
How should the TAS5162DKD exposed pad be handled?
The TAS5162DKD exposed pad must be tied to the appropriate PCB ground plane and used as the primary thermal path from the package. Provide substantial uninterrupted copper beneath the device, use the manufacturer land-pattern guidance, and connect thermal vias to the ground plane. Estimate junction temperature from power dissipation and package thermal data to confirm that the assembly remains within its rating.
What does the TAS5162DKD OTW output do?
The TAS5162DKD OTW output is an overtemperature warning output intended to notify the host when the power stage detects an overtemperature condition. Texas Instruments documents an internal pullup to 3.3 V on both SD and OTW outputs. The host controller should monitor this signal and implement an appropriate shutdown or power-management response rather than relying on the warning output alone.
How is the TAS5162DKD SD output used?
The TAS5162DKD SD output provides a shutdown-status indication for the host system. The manufacturer data sheet states that both SD and OTW outputs include an internal pullup to 3.3 V, reducing the number of external components required. Level compliance for 5 V logic can be obtained by adding external pullup resistors to 5 V where the system interface requires it.
Where can I buy TAS5162DKD and check its lead time?
Use the Request a Quote form on this page to ask for TAS5162DKD availability, current lead time, order quantity, and production packaging. The quoted response should reflect the exact orderable code and quantity needed for the build. Avoid substituting a different suffix or package arrangement without manufacturer confirmation, because shipping-code and supplier details can affect traceability and production handling.
What are the key specifications of TAS5162DKD that engineers should know?
The key TAS5162DKD specifications are two-channel operation, PWM input, bridge-tied outputs, a 0 V to 52.5 V supply range, and up to 210 W per channel into 6 ohms at 10% THD+N. The device also uses a 36-pin HSSOP with an exposed pad and provides SD and OTW outputs. These figures define the core power-stage, interface, packaging, and thermal design requirements.
Is TAS5162DKD suitable for professional and home audio amplifiers?
The TAS5162DKD is suitable for professional and home audio power amplifiers when its power, protection, thermal, and interface requirements are met. Its 210 W per-channel capability supports demanding stereo speaker systems, while the 52.5 V supply range accommodates high-rail power stages. Final qualification should include thermal testing at the intended load, output-filter validation, fault-response verification, and acoustic performance checks.

داده‌های مرجع مهندسی برای TAS5162DKD — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the TAS5162DKD for a high-power, PWM-input stereo class-D design that can deliver up to 210 W per channel into 6 ohms and uses a 36-pin HSSOP footprint. It is particularly suitable for powered speakers, professional audio, home-theater power stages, and compact subwoofer amplifiers. Do not choose it when the design requires analog audio input, a smaller package, a supply below its supported range, or a topology without PWM input. No confirmed drop-in replacement is identified here, so any alternate candidate must be checked against the complete pinout, electrical limits, protection behavior, output-filter requirements, and thermal design. For a new amplifier platform, the device should be evaluated for continuous-load heat dissipation, supply ripple sensitivity, output-current margin, fault handling, and enclosure cooling rather than peak output power alone.

مقایسه با جایگزین‌ها

پارامتر این محصول
Package 36-pin HSSOP with exposed pad
Brand Texas Instruments
Channel Configuration 2 channels
Maximum Output Power per Channel 210 W into 6 ohm BTL at 10% THD+N
Stereo Output Power 2 x 210 W
Supply Voltage Range 0 V to 52.5 V
Input Signal Type PWM
Output Configuration Bridge-tied load (BTL)
Protection System Integrated improved protection system
Status Outputs SD and OTW outputs with internal 3.3 V pullups

تفاوت‌های کلیدی

  • High stereo output capability from an integrated PWM power stage (در مقابلLower-power Class-D power stages)
  • Wide supply range for high-rail class-D designs (در مقابلTypical low-voltage Class-D amplifiers)
  • Integrated digital fault and shutdown signaling (در مقابلAmplifiers without host-controlled status outputs)

یادداشت‌های طراحی

Use the exposed pad as the primary heat-spreading path. Place the device on an uninterrupted PCB ground plane with multiple thermal vias, following the manufacturer land-pattern guidance. Estimated: power dissipation equals the average stage loss from the power supply, and the resulting junction temperature must be checked against the package rating using the specified board and airflow conditions. Do not infer continuous 210 W per channel capability from headline power alone.

Keep high-current output and supply paths short, wide, and tightly coupled to their return paths. The six-ohm load can draw substantial current at high output power, so copper width, layer transitions, vias, connectors, and output inductors must be rated for the worst-case operating condition. Use the recommended output-filter layout from the TAS5162 data sheet to limit switching-node stress and maintain amplifier stability.

Design the supply for the full load at the highest permitted rail voltage while considering the amplifier's switching and conduction losses. Maintain suitable bulk and local decoupling at the power-stage pins, and route these capacitors using very low-inductance connections. Confirm the source, ground, and output impedances against the data-sheet recommendations before adding external capacitance or changing the protection scheme.

Do not treat SD or OTW as ordinary push-pull logic outputs. Both have internal pullups to 3.3 V, and external pullups to 5 V may be required for a 5 V logic host. Configure the controller to interpret the open-drain-style status correctly, define a safe response to overtemperature and shutdown events, and avoid choosing external resistor values that conflict with the electrical-characteristics table.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements are present in the cited product information. Automotive qualification is not established by the presence of a 0 degrees C to 70 degrees C ordering listing.

جستجوهای مرتبط

TAS5162DKD datasheet TAS5162DKD pinout TAS5162DKD datasheet pdf Texas Instruments TAS5162DKD TAS5162DKD 210W amplifier TAS5162DKD 36 HSSOP TAS5162DKD Class-D application TAS5162DKD drop-in replacement TAS5162DKD equivalent amplifier TAS5162DKD vs TAS5162DKDG4 TAS5162DKD price TAS5162DKD stock TAS5162DKD schematic TAS5162DKD output filter

قطعات و اصطلاحات مرتبط

Texas Instruments TAS5162DKD TAS5162 TAS5162DKDG4 Class-D amplifier digital power amplifier PWM input bridge-tied load BTL audio amplifier IC integrated circuit semiconductor 36-pin HSSOP HSSOP package family surface-mount package exposed thermal pad 210 W per channel 52.5 V power supply THD+N SD output OTW output overtemperature warning speaker amplifier home-theater amplifier professional audio
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ