Texas Instruments

TAS5615PHD - 300W Mono Class-D Power Stage | Texas Instruments

MPN: TAS5615PHD ✓ Aktif
50 V Vdss 64-pin HTQFP with exposed pad, 14 mm x 14 mm Package
MOQ: 1 |

TAS5615PHD Genel Bakış

The Texas Instruments TAS5615PHD is an analog-input Class-D audio power stage with integrated PurePath HD closed-loop feedback, capable of delivering up to 300 W mono output or 160 W stereo output into 8-ohm speakers from a single 50 V supply. It is packaged in a 64-pin HTQFP power package measuring 14 mm by 14 mm and includes an exposed thermal pad for heat dissipation. The device supports mono, stereo, and four-channel speaker configurations while maintaining total harmonic distortion below 0.03% under the conditions stated by Texas Instruments.

A Class-D audio power amplifier is a switching amplifier that uses pulse-width modulation to deliver speaker power efficiently. The TAS5615PHD belongs to the Class-D amplifier, audio power IC, and power-management semiconductor hierarchy. Unlike a conventional linear Class-AB output stage, its switching architecture concentrates unwanted energy at high frequencies, reducing output-stage heat while retaining low audio distortion through the integrated closed-loop feedback system.

The headline features include analog input, support for a 50 V power-stage supply, up to 160 W per channel in stereo operation, and up to 300 W in mono operation. PurePath HD feedback is intended to suppress distortion associated with output-network component variation. The device accepts conventional analog audio signals, which simplifies its use in systems that do not require a PWM audio source. Its 64-pin HTQFP package provides numerous power, feedback, ground, signal, and control connections needed for a high-power output stage.

The PurePath HD architecture continuously corrects the output waveform using feedback sensed from the speaker output. This approach is intended to provide Class-AB-like fidelity while retaining the efficiency of a Class-D output stage. Texas Instruments specifies distortion below 0.03%, making the device suitable for high-fidelity amplification where audible distortion, clipping, or thermal losses would otherwise constrain the amplifier selection.

Typical uses include powered speakers, home-theater amplifiers, professional audio equipment, soundbars, multichannel audio systems, and compact high-power subwoofer or surround-speaker platforms. In a stereo design, the integrated output stages drive left and right channels. In a mono design, the power capability can be consolidated for a single loudspeaker or bridged audio architecture, subject to the thermal and load limitations in the manufacturer datasheet.

Careful thermal design is essential because the exposed pad must dissipate power generated by the switching output stage. Follow the manufacturer application diagrams for the power-supply topology, output inductors, feedback network, input filtering, copper area, and thermal layout. The 50 V power-stage rail should have low output impedance and low noise, and the 12 V supply should originate from a low-noise, low-output-impedance regulator.

This page organizes the verified power ratings, package information, operating architecture, application fit, and engineering cautions for the TAS5615PHD. It also distinguishes the target device from related TI products so design engineers can determine whether the analog-input interface, power rating, package, and thermal requirements match the intended amplifier platform.

Drop-in alternatifler için TAS5615PHD — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller TAS5615PHD (aynı form faktörü ve ayağa oturma) — farklı olan Feedback Architecture, Maximum Stereo Output Power, Package, Total Harmonic Distortion.

Texas Instruments
Feedback Architecture: Integrated feedback
Maximum Stereo Output Power: 150 W
Package: 64-pin HTQFP, 14 mm x 14 mm
İle Karşılaştır TAS5615PHD →

Bu ürüne yer değiştirme seçenekleri mevcut değil.

Alternatifleri Talep Edin

TAS5615PHD Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type Class-D audio power amplifier
Input Architecture Analog input
Feedback Architecture Integrated PurePath HD closed-loop feedback
Maximum Stereo Output Power 160 W
Maximum Mono Output Power 300 W
Speaker Load 8 ohm
Power-Stage Supply 50 V
Total Harmonic Distortion <0.03%
Supported Output Configuration 1-channel mono, 2-channel stereo, or 4-channel stereo
Paket 64-pin HTQFP with exposed pad, 14 mm x 14 mm
Montaj Türü Surface mount
Evaluation Module TAS5615PHD2EVM
Recommended 12 V Supply Type Low-noise, low-output-impedance voltage regulator
Power-Stage Rail Requirement Low output impedance and low noise

TAS5615PHD 64-pin htqfp with exposed pad, 14 mm x 14 mm Pin Yapısı Kılavuzu

TAS5615PHD (64-pin htqfp with exposed pad, 14 mm x 14 mm paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

64-pin htqfp with exposed pad, 14 mm x 14 mm paket pin çizelgesi için TAS5615PHD

Ayrıntılı pin çıkış verisi mevcut değil: TAS5615PHD.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

TAS5615PHD için uygundur 6 uygulamas: Powered Stereo Speaker, High-Power Subwoofer Amplifier, Home-Theater Power Amplifier, Professional Audio Power Stage, Multichannel Speaker Amplifier, Soundbar Speaker Amplifier.

🔊

Powered Stereo Speaker

The TAS5615PHD fits a high-output powered-speaker platform requiring analog input and Class-D efficiency. According to the Texas Instruments product page, the device can deliver up to 160 W stereo into 8-ohm speakers from a single 50 V supply, while PurePath HD feedback helps maintain distortion below 0.03% under specified conditions. The amplifier is used in the power stage after the preamplifier and volume-control network. Designers must follow the manufacturer output-filter and feedback circuits, provide a low-impedance 50 V rail, and allocate sufficient exposed-pad copper and airflow for continuous operation.

🔊

High-Power Subwoofer Amplifier

The TAS5615PHD is suitable for a mono subwoofer amplifier that can use the device's stated 300 W mono capability. Its Class-D switching architecture improves amplifier efficiency compared with a linear output stage, while the integrated PurePath HD feedback network targets low audio distortion without requiring the external feedback network used by some other power stages. The implementation must use the manufacturer-specified output inductors, filter components, and feedback connections. Continuous 300 W operation also requires careful validation of speaker impedance, supply capability, PCB thermal performance, and the exposed-pad heat-spreading area.

📺

Home-Theater Power Amplifier

For home-theater amplification, the TAS5615PHD can support the analog-input power stages used to drive passive loudspeaker channels. Its available output configurations include mono, stereo, and four-channel use, and the 160 W stereo capability into 8-ohm speakers is suitable for higher-power playback equipment. The analog interface accepts conventional preamp outputs, while PurePath HD feedback provides a mechanism for low-distortion Class-D operation. Channel population, rail loading, and thermal design must be coordinated so that simultaneous operation does not exceed the package and board heat-dissipation limits.

🎧

Professional Audio Power Stage

The TAS5615PHD can serve as the high-power output stage in professional audio equipment requiring analog input and efficient amplification. Its Class-D architecture reduces output-stage dissipation relative to a comparable linear amplifier, while PurePath HD feedback is designed to maintain signal fidelity below 0.03% THD under the manufacturer's specified test conditions. Professional systems also demand stable low-impedance drive and consistent thermal behavior, so the power rail, output filter, feedback routing, and exposed-pad cooling must follow the Texas Instruments application diagrams. Final qualification should include load sweeps, thermal testing, and channel-to-channel verification.

🖥️

Multichannel Speaker Amplifier

The TAS5615PHD supports four-channel speaker configurations for compact multichannel amplification systems. This makes it relevant to home cinema, distributed audio, and powered-speaker products that need several Class-D outputs while retaining analog-input compatibility. The device's closed-loop PurePath HD architecture provides feedback-based output regulation, and the manufacturer identifies 160 W stereo output into 8-ohm speakers from a 50 V supply. Designers must confirm the precise channel mode, maintain the recommended supply and output networks, and balance amplifier loading across the enclosure. Shared thermal capacity is often the decisive constraint in a four-channel implementation.

📱

Soundbar Speaker Amplifier

The TAS5615PHD is applicable to a soundbar or compact active-speaker design that accepts analog signals and needs substantial output power in a small heatsink footprint. Class-D operation improves efficiency, while PurePath HD feedback allows a high-power output stage without relying on a conventional linear Class-AB transistor arrangement. The target application should use the manufacturer's application circuit to preserve the intended feedback and filtering behavior. Soundbar packaging makes thermal design especially important because several channels may operate simultaneously in a confined enclosure, so exposed-pad via density, copper area, and ambient-temperature derating require careful evaluation.

Önerilen Ürünler Özeti

TAS5615PHD2EVM Evaluation module for the target power stage Kullanıldığı Yer: Powered Stereo Speaker, High-Power Subwoofer Amplifier, Home-Theater Power Amplifier, Professional Audio Power Stage, Multichannel Speaker Amplifier, Soundbar Speaker Amplifier
What is the TAS5615PHD and what is its maximum output power?
The TAS5615PHD is an analog-input Class-D audio power amplifier with integrated PurePath HD closed-loop feedback. According to the Texas Instruments product page, it can drive up to 160 W stereo into 8-ohm speakers from a single 50 V supply, while the manufacturer documentation also identifies a 300 W mono power capability. The device combines high output power with total harmonic distortion below 0.03% under the stated operating conditions.
What are the key specifications of TAS5615PHD that engineers should know?
The key TAS5615PHD specifications are analog input, Class-D operation, PurePath HD closed-loop feedback, up to 160 W stereo output, up to 300 W mono output, and a 50 V power-stage supply. The device supports 1-channel mono, 2-channel stereo, or 4-channel stereo arrangements and is offered in a 64-pin HTQFP package with an exposed pad. According to Texas Instruments, output distortion can remain below 0.03% under specified conditions.
Where can I download the TAS5615PHD datasheet PDF?
The official TAS5615PHD datasheet PDF is available from the Texas Instruments product page at https://www.ti.com/product/TAS5615 or through the manufacturer document link at https://www.ti.com/lit/ds/symlink/tas5615.pdf. The datasheet contains the application diagrams, recommended power supplies, required external components, feedback implementation, output-filter information, and PCB guidance needed to evaluate and implement the amplifier.
Where can I find the TAS5615PHD pinout and package information?
The TAS5615PHD uses a 64-pin HTQFP package with an exposed pad and a 14 mm by 14 mm body. Use the pin-description table and land-pattern information in the Texas Instruments datasheet when assigning signals or laying out the PCB. The exposed pad is part of the thermal and electrical design, so it should not be treated as an unconnected pin or routed only for mechanical attachment.
What is the difference between TAS5615PHD and a conventional Class-AB amplifier?
The TAS5615PHD uses a switching Class-D output architecture and integrated PurePath HD feedback rather than a conventional linear Class-AB output stage. According to Texas Instruments, PurePath HD enables Class-AB-amplifier performance below 0.03% THD while retaining the efficiency advantages of Class-D operation. The practical design trade-off is a more demanding high-voltage power rail, output-filter network, and exposed-pad thermal layout.
Can TAS5615PHD drive a mono subwoofer at 300 W?
The TAS5615PHD is identified by Texas Instruments as a 300 W mono PurePath HD power stage, making it suitable for evaluating high-power subwoofer and PA designs. The 300 W figure applies to the manufacturer-defined electrical and thermal conditions; the actual permissible output depends on speaker impedance, supply capability, output-network design, ambient temperature, and PCB thermal performance. Use the datasheet test conditions rather than treating the headline rating as unconditional.
How should the TAS5615PHD power supply be designed?
The Texas Instruments datasheet states that the 12 V supply should come from a low-noise, low-output-impedance regulator. It also states that the 50 V power-stage supply should have low output impedance and low noise. Correct decoupling, supply stability, grounding, and the application diagram are therefore critical. Follow the manufacturer recommendations for bulk and local capacitors rather than substituting unrelated power-supply networks without stability and transient-response checks.
What thermal design is required for the TAS5615PHD exposed-pad package?
The exposed pad must be connected to a low-impedance thermal and electrical plane, and the PCB must provide enough copper area to remove output-stage heat. According to the manufacturer datasheet, required power-supply and passive components should follow the application diagrams. Thermal performance depends on copper area, via distribution, airflow, ambient temperature, and continuous output power, so verify the final board under worst-case stereo or mono loading.
Is TAS5615PHD pin compatible with TAS5616PHD?
No. The TAS5615PHD is an analog-input Class-D power stage, while the TAS5616 is identified as a PWM-input Class-D amplifier. Although both families are presented in related comparison listings, changing the input architecture can change the required signal source and board-level implementation. Treat them as different amplifier interfaces rather than unqualified drop-in replacements, and verify the complete datasheet pin descriptions before considering any board redesign.
What is the best drop-in replacement for TAS5615PHD?
No confirmed drop-in replacement for the TAS5615PHD was identified in the available manufacturer and cross-reference information. A valid replacement must preserve the 64-pin HTQFP footprint, pin functions, analog input interface, PurePath HD feedback approach, supply arrangement, output-stage ratings, and thermal limits. Related TI power-stage products are not automatically interchangeable, so use the manufacturer cross-reference search and compare the complete datasheets before approving a substitution.
What can replace TAS5615PHD in an amplifier design?
The closest replacement can only be selected after confirming pin-to-pin compatibility, analog input support, output-power ratings, feedback topology, and thermal requirements. The TAS5616PHD is a related 160 W-class TI power stage, but it uses PWM input and therefore is not a confirmed drop-in substitute for the analog-input TAS5615PHD. For an existing PCB, retain the original part or obtain a manufacturer-confirmed pin-compatible device rather than changing interfaces without a board revision.
When should I choose TAS5615PHD for a powered speaker?
Choose the TAS5615PHD when the powered-speaker design needs an analog audio input, high-power Class-D output, and integrated PurePath HD feedback. It supports up to 160 W stereo into 8-ohm speakers from a 50 V supply and up to 300 W in a mono configuration. It is appropriate when the team can implement the manufacturer application circuit and provide the required PCB copper, exposed-pad cooling, output filtering, and high-voltage supply design.
Is TAS5615PHD suitable for home theater and multichannel audio?
The TAS5615PHD is suitable for multichannel home-theater amplification when each configured output channel remains within the device's mono, stereo, and four-channel operating modes and stays within the documented power and thermal limits. Its analog input suits conventional preamplifier signals, and the closed-loop feedback architecture targets low distortion. A four-channel system must also account for shared thermal capacity, supply headroom, channel configuration, and connector routing.
Where can I buy TAS5615PHD and what is its current lead time?
Use the Request a Quote form on this page to request TAS5615PHD availability, current lead time, order quantity, and shipment options. The verified listings include market and distributor availability information, but they do not provide a complete quantity-break schedule that can be used as customer pricing evidence. Request a written quotation for the exact MPN, package suffix, quantity, and delivery requirements rather than relying on a stale marketplace figure.
Does TAS5615PHD support RoHS and automotive qualification?
RoHS and automotive qualification status are not stated in the accessible manufacturer information for this product. Consequently, the compliance fields remain unknown rather than being inferred from the package or application. Request the current manufacturer declaration, material declaration, or qualification documentation for the exact TAS5615PHD ordering code before using the amplifier in a regulated commercial, automotive, or safety-governed product.

Mühendislik referans verileri: TAS5615PHD — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the TAS5615PHD when the design requires an analog-input, high-power Class-D stage with integrated PurePath HD feedback. Its stated capability of 160 W stereo into 8-ohm speakers from a 50 V supply, together with a 300 W mono option, makes it appropriate for powered speakers, home-theater amplification, soundbars, and professional audio equipment. The primary engineering commitments are a 64-pin HTQFP layout, the manufacturer-defined output-filter and feedback networks, a low-impedance 50 V rail, and an exposed-pad thermal design. No confirmed pin-compatible alternative was identified. The related TAS5616PHD uses PWM input and should not be treated as a direct drop-in replacement for an existing analog-input board. For a new design, compare the TAS5615 family with other TI power stages using input architecture, output power, feedback method, package, thermal limits, and required external components; use the exact ordering suffix and complete datasheet as the controlling selection record.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün
Brand Texas Instruments
Package 64-pin HTQFP with exposed pad, 14 mm x 14 mm
Amplifier Type Class-D
Input Architecture Analog input
Feedback Architecture Integrated PurePath HD closed-loop feedback
Maximum Stereo Output Power 160 W into 8 ohms
Maximum Mono Output Power 300 W
Power-Stage Supply 50 V
Total Harmonic Distortion <0.03%
Output Configurations 1-channel mono, 2-channel stereo, or 4-channel stereo

Tasarım Notları

Treat the exposed pad as the primary thermal path for the Class-D output stage. Connect it to the PCB ground or power-ground plane with the thermal-via arrangement recommended in the manufacturer application diagrams, and provide as much uninterrupted copper as the enclosure allows. Validate the final assembly at the maximum intended output power, highest ambient temperature, and worst-case speaker impedance. A nominal 300 W device rating does not guarantee that an undersized board, restricted airflow, or shared multichannel loading will maintain safe junction temperatures.

The Texas Instruments datasheet states that the 12 V supply should use a low-noise, low-output-impedance voltage regulator and that the 50 V power-stage supply should also have low output impedance and low noise. Follow the recommended bulk and local decoupling network and preserve the specified supply sequencing and grounding arrangement. High output power can produce rapid current transitions in the speaker and supply loops, so validate supply stability, droop, noise coupling, and startup behavior with the intended load rather than evaluating only a no-load circuit.

Reproduce the manufacturer output-filter, feedback, and supply components and maintain short, low-impedance routing for high-current power paths. The exposed pad needs a dense and balanced via field to transfer heat into both surface and inner copper layers. Keep sensitive analog input routing away from switching-node and output-filter areas, and use the datasheet's recommended grounding topology. Because the device can operate at 160 W stereo or 300 W mono, conductor width, vias, connectors, and copper connections must carry the intended current without unacceptable voltage drop or heating.

Do not substitute a PWM-input power stage for the analog-input TAS5615PHD without redesigning and revalidating the signal path and pin functions. Also avoid changing output inductors, feedback components, or filter values outside the manufacturer circuit without stability and distortion analysis. Check the required output-filter topology, speaker impedance, continuous-power limits, and thermal derating. The PurePath HD label alone does not make unrelated Class-D amplifiers interchangeable, because external component values and feedback implementation determine practical performance.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Compliance and qualification status are not stated in the accessible manufacturer information. Obtain current declarations for the exact ordering code before production release.

Veri doğrulanma tarihi: 2026-11-10 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

TAS5615PHD datasheet TAS5615PHD datasheet pdf TAS5615PHD pinout TAS5615PHD 64 HTQFP TAS5615PHD 300W mono TAS5615PHD 160W stereo Texas Instruments TAS5615PHD TAS5615PHD application circuit TAS5615PHD evaluation module TAS5615PHD replacement TAS5615PHD cross reference TAS5615PHD price TAS5615PHD stock TAS5615PHD vs TAS5616PHD TAS5615PHD PurePath HD amplifier

İlgili Bileşenler ve Terimler

Texas Instruments TAS5615PHD TAS5615 TAS5615PHD2EVM TAS5616PHD Class-D amplifier audio power amplifier analog-input amplifier power-management IC semiconductor PurePath HD closed-loop feedback total harmonic distortion THD power-supply rejection HTQFP-64 TQFP package family surface mount SMD exposed pad 50 V power-stage supply 12 V low-noise regulator 8-ohm speaker powered speaker subwoofer amplifier home-theater amplifier professional audio
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle