TCA5013ZAHR - Smart Card Interface | Texas Instruments
MPN: TCA5013ZAHR ✓ AktifTCA5013ZAHR Genel Bakış
A smart card interface IC is an interface-controller device that connects a host processor with ISO 7816 smart cards and SAMs. It manages card power, card-clock and card-data signaling, card insertion detection, and the host-side control interface. The TCA5013 is intended for systems requiring one user-card slot plus multiple SAM sockets, allowing payment terminals and access-control products to share a controlled smart-card subsystem.
The TCA5013 supports EMV 4.3, ISO 7816-3 and ISO 7816-10 applications. Its single-supply architecture reduces the number of external card-voltage rails required by the host design. The device also includes an I2C control interface and is designed to operate in the industrial temperature range from -40 °C to 85 °C. The 48-terminal NFBGA package provides a compact surface-mount solution for space-constrained terminal hardware.
The manufacturer describes the TCA5013 as a feature-rich smartcard interface IC for payment-terminal designs. A typical implementation places the TCA5013 between the host controller and one user-card connector, with additional connectors for as many as three SAM cards. Card insertion and removal can be detected, while the IC controls the card interfaces and generates the card voltages required by the attached cards. The host configures the device through I2C rather than reproducing low-level card timing and power management in application firmware.
The TCA5013 is suitable for electronic point-of-sale terminals, payment acceptance equipment, secure-access readers, banking terminals, and other ISO 7816-based systems. The TIDA-00382 reference design provides an implementation pattern for an electronic point-of-sale smart-card subsystem, including a user-card slot and TCA5013-based card detection. It is also useful where multiple secure credentials must be evaluated while maintaining a compact board footprint.
PCB implementation requires careful BGA escape routing and power-supply integrity. Place the device close to the user-card and SAM connectors to minimize clock and data trace lengths, route sensitive signals away from switching nodes, and follow the manufacturer’s NFBGA land pattern and assembly guidance. Confirm the card connector pin assignments, pull-up requirements, supply capacitance, and signal-level compatibility before releasing the layout.
This product page combines the manufacturer’s smart-card interface specifications with package and ordering details, application guidance, practical PCB considerations, and verified sourcing information. It is intended to help engineers identify the correct TCA5013ZAHR configuration and determine whether its 48-pin NFBGA implementation fits a given secure-card terminal design.
Drop-in alternatifler için TCA5013ZAHR — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinTCA5013ZAHR Özellikler
| Product Type | Smart card interface IC |
| User Card Support | 1 user card |
| SAM Support | Up to 3 Secure Access Module cards |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Host Control Interface | I2C |
| Card Standards | ISO 7816-3 and ISO 7816-10 |
| Payment Application Support | EMV 4.3 |
| Paket | 48-pin NFBGA (ZAH), 5 x 5 mm |
| Terminal Count | 48 terminals |
| Montaj Türü | Surface mount |
| İşletim Sıcaklığı Aralığı | -40 °C to 85 °C |
| Temperature Grade | Industrial |
| Terminal Form | Ball |
| Package Shape | Square |
| Reflow Peak Temperature | 260 °C |
| Card Voltage Generation | Generates all card voltages from a single supply |
| Card Insertion Detection | Supported for the user-card slot |
| Primary Application | Point-of-sale terminals |
TCA5013ZAHR square Pin Yapısı Kılavuzu
TCA5013ZAHR (square paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: TCA5013ZAHR.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
TCA5013ZAHR için uygundur 6 uygulamas: Electronic Point-of-Sale Terminal, Secure SAM Banking Terminal, Payment Card Reader, Access Control and Credential Reader, Multi-SAM Authentication Terminal, Smart Card Test and Demo System.
Electronic Point-of-Sale Terminal
The TCA5013ZAHR fits an electronic point-of-sale terminal because it supports one user card and up to three SAMs while using I2C for host control. Its single 2.7 V to 5.5 V supply and integrated card-voltage generation simplify the power architecture around the card sockets. EMV 4.3, ISO 7816-3 and ISO 7816-10 support align the interface with compliant payment cards. The manufacturer identifies this terminal use as a primary application, and the TIDA-00382 reference design demonstrates a TCA5013-based smart-card subsystem. Its 5 x 5 mm NFBGA package also limits board area near the connectors.
Önerilen
Secure SAM Banking Terminal
The TCA5013ZAHR is suitable for banking terminals that evaluate multiple secure credentials. One user-card slot handles the primary card, while up to three SAM interfaces support cryptographic modules used for authorization, key derivation, or transaction security. I2C keeps the host-side command path compact, and single-supply card-voltage generation reduces the number of regulated card rails. The ISO 7816-3 and ISO 7816-10 support specified by the manufacturer provides a consistent basis for card communication. Designers should place the IC close to the connector bank to keep sensitive clock and data routes short.
Önerilen
Payment Card Reader
A standalone payment-card reader can use the TCA5013ZAHR to manage the physical smart-card interface while the host processor handles transaction logic. The device provides one user-card channel, generates the card voltages from a 2.7 V to 5.5 V supply, and reports card-related activity to the host through I2C. EMV 4.3 support is valuable in acceptance equipment, while the compact 48-pin NFBGA package preserves board space around a connector or slot. PCB layout should prioritize short card-clock and card-data routes, clean supply bypassing, and controlled grounding to maintain signal integrity.
Önerilen
Access Control and Credential Reader
The TCA5013ZAHR can support access-control readers that accept an ISO 7816 credential while optionally using SAM cards for offline authentication or cryptographic operations. Its one user-card plus three-SAM architecture permits several trust elements without requiring a separate interface IC for each credential. The I2C host connection allows a security microcontroller or embedded Linux system to configure the card interface and process transactions. The -40 °C to 85 °C industrial range supports equipment intended for controlled indoor or industrial environments, subject to the enclosure and system-level thermal requirements.
Önerilen
Multi-SAM Authentication Terminal
The TCA5013ZAHR is appropriate when an authentication terminal must expose as many as three SAM sockets alongside one user card. This arrangement supports multiple issuer credentials, cryptographic algorithms, or permission domains while centralizing card-power control in one IC. The device’s single-supply operation simplifies system power planning, and standardized ISO 7816 support helps align the user and SAM interfaces with common card hardware. Engineers should verify connector card-detection signals, external clocking requirements, and all SAM routing against the manufacturer pin table before fabrication.
Önerilen
Smart Card Test and Demo System
The TCA5013ZAHR can serve as the card-side controller in a smart-card development or test platform. Exposing one user-card slot and three SAM positions allows firmware engineers to exercise card insertion detection, ISO 7816 communication, and multi-credential workflows through a single host-controlled device. I2C simplifies laboratory instrumentation and embedded-host integration. The 48-ball NFBGA footprint requires careful breakout or fanout design, so prototype boards should use the manufacturer’s land pattern, preserve escape-routing clearance, and provide local bypass capacitance. The device is best suited to controlled test equipment rather than exposed-card ruggedization work.
Önerilen
Mühendislik referans verileri: TCA5013ZAHR — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Package | 48-pin NFBGA (ZAH), 5 x 5 mm |
| Brand | Texas Instruments |
| User Card Support | 1 user card |
| SAM Support | Up to 3 SAM cards |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Host Control Interface | I2C |
| Card Standards | EMV 4.3, ISO 7816-3 and ISO 7816-10 |
| Operating Temperature Range | -40 °C to 85 °C |
| Temperature Grade | Industrial |
| Mounting Type | Surface mount |
Ana Farklılayıcılar
- Combines one user-card interface and three SAM interfaces (karşılaştırma:Generic single-SAM smart-card interface)
- Single-supply card-voltage architecture (karşılaştırma:Multi-rail smart-card interface design)
- Standards coverage for payment-card terminals (karşılaştırma:ISO 7816-only interface)
- Compact 48-ball surface-mount implementation (karşılaştırma:Larger leaded smart-card controller package)
Tasarım Notları
Place the TCA5013ZAHR close to the user-card and SAM connectors. The device controls smart-card signaling, so shorter clock and data routes reduce susceptibility to noise, ringing, and crosstalk. Follow the Texas Instruments ZAH land pattern exactly, maintain the specified ball-pad clearances, and provide an unobstructed escape path from the fine-pitch BGA. Keep mounting and via arrangements consistent with the manufacturer’s assembly guidance.
Use a clean 2.7 V to 5.5 V source within the device’s specified operating range and place the recommended bypass capacitors close to the supply and ground balls. Because the TCA5013ZAHR generates card voltages from a single supply, supply disturbance can appear directly on card-facing signals. Keep the regulator and switching circuitry away from sensitive card routes, and check startup and card-insertion behavior across minimum and maximum supply conditions.
Route card clock, card data, and SAM interfaces as controlled-impedance or tightly referenced paths where the host design supports them. Avoid routing beneath noisy regulators, display converters, or motor drive nodes, and use a continuous ground plane where practical. Confirm card-connector pin assignments, card-detection inputs, and required external components against the manufacturer pin-description table before releasing the PCB artwork.
Do not substitute a generic smart-card interface solely because it supports ISO 7816. A valid drop-in replacement must match the 48-ball ZAH footprint, one user card, three SAM positions, I2C behavior, supply range, and card-voltage architecture. Also verify the -40 °C to 85 °C operating range and the manufacturer’s assembly requirements, including a 260 °C peak reflow temperature.
Uyumluluk Bilgisi
Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified in the manufacturer information and must be confirmed against the current device documentation.