Texas Instruments

TCA5013ZAHR - Smart Card Interface | Texas Instruments

部品番号: TCA5013ZAHR ✓ 生産中
2.7 V to 5.5 V Vdss ISO 7816-3 and ISO 7816-10 Rds(on) 48-pin NFBGA (ZAH), 5 x 5 mm Package
MOQ: 1 |

TCA5013ZAHR 概要

The Texas Instruments TCA5013ZAHR is a smart card interface IC designed for one user card and up to three Secure Access Module (SAM) cards. The device operates from a single supply, generates the required card voltages, and supports ISO 7816-3 and ISO 7816-10 compliant cards for point-of-sale terminals and other secure-access systems. It is packaged in a 48-pin NFBGA (ZAH) package measuring 5 x 5 mm.

A smart card interface IC is an interface-controller device that connects a host processor with ISO 7816 smart cards and SAMs. It manages card power, card-clock and card-data signaling, card insertion detection, and the host-side control interface. The TCA5013 is intended for systems requiring one user-card slot plus multiple SAM sockets, allowing payment terminals and access-control products to share a controlled smart-card subsystem.

The TCA5013 supports EMV 4.3, ISO 7816-3 and ISO 7816-10 applications. Its single-supply architecture reduces the number of external card-voltage rails required by the host design. The device also includes an I2C control interface and is designed to operate in the industrial temperature range from -40 °C to 85 °C. The 48-terminal NFBGA package provides a compact surface-mount solution for space-constrained terminal hardware.

The manufacturer describes the TCA5013 as a feature-rich smartcard interface IC for payment-terminal designs. A typical implementation places the TCA5013 between the host controller and one user-card connector, with additional connectors for as many as three SAM cards. Card insertion and removal can be detected, while the IC controls the card interfaces and generates the card voltages required by the attached cards. The host configures the device through I2C rather than reproducing low-level card timing and power management in application firmware.

The TCA5013 is suitable for electronic point-of-sale terminals, payment acceptance equipment, secure-access readers, banking terminals, and other ISO 7816-based systems. The TIDA-00382 reference design provides an implementation pattern for an electronic point-of-sale smart-card subsystem, including a user-card slot and TCA5013-based card detection. It is also useful where multiple secure credentials must be evaluated while maintaining a compact board footprint.

PCB implementation requires careful BGA escape routing and power-supply integrity. Place the device close to the user-card and SAM connectors to minimize clock and data trace lengths, route sensitive signals away from switching nodes, and follow the manufacturer’s NFBGA land pattern and assembly guidance. Confirm the card connector pin assignments, pull-up requirements, supply capacitance, and signal-level compatibility before releasing the layout.

This product page combines the manufacturer’s smart-card interface specifications with package and ordering details, application guidance, practical PCB considerations, and verified sourcing information. It is intended to help engineers identify the correct TCA5013ZAHR configuration and determine whether its 48-pin NFBGA implementation fits a given secure-card terminal design.

ドロップイン代替品: TCA5013ZAHR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

TCA5013ZAHR 仕様

Product Type Smart card interface IC
User Card Support 1 user card
SAM Support Up to 3 Secure Access Module cards
Supply Voltage Range 2.7 V to 5.5 V
Host Control Interface I2C
Card Standards ISO 7816-3 and ISO 7816-10
Payment Application Support EMV 4.3
パッケージ 48-pin NFBGA (ZAH), 5 x 5 mm
Terminal Count 48 terminals
実装タイプ Surface mount
動作温度範囲 -40 °C to 85 °C
Temperature Grade Industrial
Terminal Form Ball
Package Shape Square
Reflow Peak Temperature 260 °C
Card Voltage Generation Generates all card voltages from a single supply
Card Insertion Detection Supported for the user-card slot
Primary Application Point-of-sale terminals

TCA5013ZAHR square ピン配置ガイド

TCA5013ZAHR (square パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

TCA5013ZAHR の square パッケージピン配置図

詳細なピン配置データはありません: TCA5013ZAHR.

詳細は データシート をご参照ください。

主な用途

TCA5013ZAHR の用途: 6 件s: Electronic Point-of-Sale Terminal, Secure SAM Banking Terminal, Payment Card Reader, Access Control and Credential Reader, Multi-SAM Authentication Terminal, Smart Card Test and Demo System.

💳

Electronic Point-of-Sale Terminal

The TCA5013ZAHR fits an electronic point-of-sale terminal because it supports one user card and up to three SAMs while using I2C for host control. Its single 2.7 V to 5.5 V supply and integrated card-voltage generation simplify the power architecture around the card sockets. EMV 4.3, ISO 7816-3 and ISO 7816-10 support align the interface with compliant payment cards. The manufacturer identifies this terminal use as a primary application, and the TIDA-00382 reference design demonstrates a TCA5013-based smart-card subsystem. Its 5 x 5 mm NFBGA package also limits board area near the connectors.

🏦

Secure SAM Banking Terminal

The TCA5013ZAHR is suitable for banking terminals that evaluate multiple secure credentials. One user-card slot handles the primary card, while up to three SAM interfaces support cryptographic modules used for authorization, key derivation, or transaction security. I2C keeps the host-side command path compact, and single-supply card-voltage generation reduces the number of regulated card rails. The ISO 7816-3 and ISO 7816-10 support specified by the manufacturer provides a consistent basis for card communication. Designers should place the IC close to the connector bank to keep sensitive clock and data routes short.

💳

Payment Card Reader

A standalone payment-card reader can use the TCA5013ZAHR to manage the physical smart-card interface while the host processor handles transaction logic. The device provides one user-card channel, generates the card voltages from a 2.7 V to 5.5 V supply, and reports card-related activity to the host through I2C. EMV 4.3 support is valuable in acceptance equipment, while the compact 48-pin NFBGA package preserves board space around a connector or slot. PCB layout should prioritize short card-clock and card-data routes, clean supply bypassing, and controlled grounding to maintain signal integrity.

🔐

Access Control and Credential Reader

The TCA5013ZAHR can support access-control readers that accept an ISO 7816 credential while optionally using SAM cards for offline authentication or cryptographic operations. Its one user-card plus three-SAM architecture permits several trust elements without requiring a separate interface IC for each credential. The I2C host connection allows a security microcontroller or embedded Linux system to configure the card interface and process transactions. The -40 °C to 85 °C industrial range supports equipment intended for controlled indoor or industrial environments, subject to the enclosure and system-level thermal requirements.

🛡️

Multi-SAM Authentication Terminal

The TCA5013ZAHR is appropriate when an authentication terminal must expose as many as three SAM sockets alongside one user card. This arrangement supports multiple issuer credentials, cryptographic algorithms, or permission domains while centralizing card-power control in one IC. The device’s single-supply operation simplifies system power planning, and standardized ISO 7816 support helps align the user and SAM interfaces with common card hardware. Engineers should verify connector card-detection signals, external clocking requirements, and all SAM routing against the manufacturer pin table before fabrication.

🧪

Smart Card Test and Demo System

The TCA5013ZAHR can serve as the card-side controller in a smart-card development or test platform. Exposing one user-card slot and three SAM positions allows firmware engineers to exercise card insertion detection, ISO 7816 communication, and multi-credential workflows through a single host-controlled device. I2C simplifies laboratory instrumentation and embedded-host integration. The 48-ball NFBGA footprint requires careful breakout or fanout design, so prototype boards should use the manufacturer’s land pattern, preserve escape-routing clearance, and provide local bypass capacitance. The device is best suited to controlled test equipment rather than exposed-card ruggedization work.

What is the TCA5013ZAHR?
The TCA5013ZAHR is a Texas Instruments smart card interface IC for one user card and up to three Secure Access Module cards. According to the manufacturer datasheet, it supports EMV 4.3, ISO 7816-3 and ISO 7816-10 cards, operates from a single 2.7 V to 5.5 V supply, and is packaged in a 48-pin NFBGA (ZAH) package measuring 5 x 5 mm.
How many smart cards can the TCA5013ZAHR support?
The TCA5013ZAHR supports one user card and as many as three SAM cards, giving a system four card interfaces in total. The user card is the primary payment or identity credential, while the three SAM sockets support secure cryptographic credentials used for transaction authorization, key management, or application security.
What standards are supported by the TCA5013ZAHR?
The TCA5013ZAHR supports EMV 4.3, ISO 7816-3 and ISO 7816-10 compliant cards. According to the Texas Instruments datasheet, this makes the device suitable for electronic point-of-sale terminals and secure-card systems that require standardized electrical and protocol behavior for user cards and SAMs.
What is the supply voltage range of TCA5013ZAHR?
The TCA5013ZAHR operates from a 2.7 V to 5.5 V supply. The manufacturer describes it as a single-supply design that generates the required card voltages internally, reducing the number of separately regulated rails needed around the user-card and SAM connectors.
What interface does TCA5013ZAHR use with the host processor?
The TCA5013ZAHR uses a standard I2C interface for host control. According to the manufacturer datasheet, the host configures and monitors the smart-card interface through I2C while the IC handles the card-side signaling, supply generation, card detection, and communication with the user card and SAM cards.
Where can I download the TCA5013ZAHR datasheet PDF?
The official TCA5013 datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/tca5013.pdf. Use the manufacturer’s pin-description table, electrical characteristics, and application information when assigning the 48 NFBGA balls and designing the card interface around the TCA5013ZAHR.
Where can I find the TCA5013ZAHR pinout?
The TCA5013ZAHR pinout is documented in the manufacturer datasheet and the ordered-part information for the 48-pin NFBGA (ZAH) package. Use the ZAH ball map and pin-description table together because the exposed package balls include smart-card, SAM, power, control, and ground assignments.
What is the package and pin count of TCA5013ZAHR?
The TCA5013ZAHR is a surface-mount, 48-terminal NFBGA package designated ZAH, with a square 5 x 5 mm body. The ZAH ordering code corresponds to the industrial temperature grade from -40 °C to 85 °C, and the package uses ball terminals rather than perimeter leads.
Is TCA5013ZAHR suitable for a point-of-sale terminal?
Yes, the TCA5013ZAHR is specifically targeted at electronic point-of-sale terminals. Its support for EMV 4.3, ISO 7816-3 and ISO 7816-10, together with one user-card slot and three SAM interfaces, matches terminals that need both a payment card and secure cryptographic modules.
What is the TCA5013ZAHR vs TCA5013 difference?
TCA5013ZAHR is the complete ordering designation for the TCA5013 device in the 48-pin ZAH NFBGA package. The base TCA5013 identifies the product family rather than the fully specified package, temperature-grade, and ordering option, so a footprint-level comparison should use the complete TCA5013ZAHR designation.
When should I choose the TCA5013ZAHR for a secure-card design?
Choose the TCA5013ZAHR when the design needs one ISO 7816 user card plus up to three SAM cards and requires card voltages generated from one 2.7 V to 5.5 V supply. Its I2C host interface also simplifies integration with an embedded processor, while the compact 5 x 5 mm NFBGA package suits compact terminal hardware.
What can replace the TCA5013ZAHR?
No verified pin-to-pin replacement was identified for the TCA5013ZAHR in the available cross-reference results. Because smart-card interface ICs differ in user-card count, SAM count, voltage generation, protocol support, and ball assignments, a functional substitute should not be treated as a drop-in replacement without a complete pinout and timing comparison.
Is TCA5013ZAHR the same as a generic smart-card interface IC?
No, the TCA5013ZAHR has a defined combination of one user-card interface, three SAM interfaces, I2C host control, single-supply card-voltage generation, and a 48-ball ZAH package. A generic smart-card controller with different SAM resources or different ball assignments may perform related functions but will not necessarily be a drop-in replacement.
How do I design the PCB around the TCA5013ZAHR?
Place the TCA5013ZAHR close to the user-card and SAM connectors, preserve the manufacturer’s NFBGA land pattern, and minimize clock and data routing. Provide the specified supply and bypass capacitance, keep sensitive card signals away from noisy switching paths, and follow the datasheet’s assembly and reflow requirements, including its 260 °C peak reflow temperature.
Where can I buy TCA5013ZAHR and what is its current lead time?
Use the Request a Quote form on this page to check TCA5013ZAHR availability, current unit pricing, packaging, and lead time for the exact 48-pin ZAH ordering option. The manufacturer product page lists the device as an active smart-card interface option, and the verified product listings identify the same exact MPN.
What are the key specifications of TCA5013ZAHR that engineers should know?
The TCA5013ZAHR integrates one user-card interface, up to three SAM interfaces, a 2.7 V to 5.5 V supply range, I2C host control, and support for EMV 4.3, ISO 7816-3 and ISO 7816-10. It uses a 48-pin NFBGA (ZAH) package, operates from -40 °C to 85 °C, generates card voltages from a single supply, and targets electronic point-of-sale terminals.
What is the best cross-brand equivalent for TCA5013ZAHR?
No cross-brand drop-in equivalent was confirmed by the available cross-reference information. For a smart-card interface IC, equivalence requires matching the 48-ball footprint, user-card and SAM counts, ISO 7816 electrical behavior, I2C control, supply range, and card-voltage architecture; a device that differs in any of these areas is not a drop-in replacement.

エンジニアリング参考データ: TCA5013ZAHR — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the TCA5013ZAHR when the product must support one ISO 7816 user card and as many as three SAMs in a compact payment or access-control terminal. Its 2.7 V to 5.5 V single-supply operation, integrated card-voltage generation, I2C host control, and EMV 4.3 support make it especially suitable for electronic point-of-sale equipment. Select it when the PCB can accommodate the 48-pin NFBGA (ZAH) land pattern and when industrial-temperature operation from -40 °C to 85 °C is required. Do not choose a generic smart-card controller as an assumed replacement: verify the user-card count, three-SAM arrangement, ZAH ball map, clocking, I2C behavior, card-detection functions, and supply requirements. A functionally similar device that differs in any of these areas is not a drop-in substitution.

代替品との比較

パラメータ この製品
Package 48-pin NFBGA (ZAH), 5 x 5 mm
Brand Texas Instruments
User Card Support 1 user card
SAM Support Up to 3 SAM cards
Supply Voltage Range 2.7 V to 5.5 V
Host Control Interface I2C
Card Standards EMV 4.3, ISO 7816-3 and ISO 7816-10
Operating Temperature Range -40 °C to 85 °C
Temperature Grade Industrial
Mounting Type Surface mount

主な差別化要因

  • Combines one user-card interface and three SAM interfaces (vs Generic single-SAM smart-card interface)
  • Single-supply card-voltage architecture (vs Multi-rail smart-card interface design)
  • Standards coverage for payment-card terminals (vs ISO 7816-only interface)
  • Compact 48-ball surface-mount implementation (vs Larger leaded smart-card controller package)

設計ノート

Place the TCA5013ZAHR close to the user-card and SAM connectors. The device controls smart-card signaling, so shorter clock and data routes reduce susceptibility to noise, ringing, and crosstalk. Follow the Texas Instruments ZAH land pattern exactly, maintain the specified ball-pad clearances, and provide an unobstructed escape path from the fine-pitch BGA. Keep mounting and via arrangements consistent with the manufacturer’s assembly guidance.

Use a clean 2.7 V to 5.5 V source within the device’s specified operating range and place the recommended bypass capacitors close to the supply and ground balls. Because the TCA5013ZAHR generates card voltages from a single supply, supply disturbance can appear directly on card-facing signals. Keep the regulator and switching circuitry away from sensitive card routes, and check startup and card-insertion behavior across minimum and maximum supply conditions.

Route card clock, card data, and SAM interfaces as controlled-impedance or tightly referenced paths where the host design supports them. Avoid routing beneath noisy regulators, display converters, or motor drive nodes, and use a continuous ground plane where practical. Confirm card-connector pin assignments, card-detection inputs, and required external components against the manufacturer pin-description table before releasing the PCB artwork.

Do not substitute a generic smart-card interface solely because it supports ISO 7816. A valid drop-in replacement must match the 48-ball ZAH footprint, one user card, three SAM positions, I2C behavior, supply range, and card-voltage architecture. Also verify the -40 °C to 85 °C operating range and the manufacturer’s assembly requirements, including a 260 °C peak reflow temperature.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified in the manufacturer information and must be confirmed against the current device documentation.

データ検証日: 2026-11-16 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

TCA5013ZAHR datasheet TCA5013ZAHR pinout TCA5013ZAHR datasheet pdf TCA5013ZAHR specifications TCA5013ZAHR 48 NFBGA TCA5013ZAHR smart card interface TCA5013ZAHR ISO 7816 TCA5013ZAHR I2C interface TCA5013ZAHR equivalent TCA5013ZAHR replacement TCA5013ZAHR price TCA5013ZAHR stock Texas Instruments TCA5013ZAHR TCA5013 point of sale terminal

関連部品&用語

Texas Instruments TCA5013ZAHR TCA5013 smart card interface IC interface controller semiconductor electronic point-of-sale terminal secure access module SAM EMV 4.3 ISO 7816-3 ISO 7816-10 I2C single-supply operation card voltage generation 48-pin NFBGA ZAH package 5 x 5 mm package surface mount industrial temperature grade card insertion detection TIDA-00382 payment terminal smart-card connector
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示