Texas Instruments

THS6092CDR - 275mA +12V ADSL Driver | Texas Instruments (Tape & Reel)

MPN: THS6092CDR ✓ Aktif
+12 V Vdss 275 mA Id 8-pin SOIC Package
MOQ: 1 |

THS6092CDR Genel Bakış

The Texas Instruments THS6092CDR is a dual high-speed operational amplifier configured as a 2/0 differential line driver for ADSL CPE and DSL applications. It supplies 275 mA of output current, operates from a single +12 V supply, and is packaged in an 8-pin SOIC. The device is intended for driving signals from a remote terminal toward the central office in asymmetrical digital subscriber line systems.

An ADSL line driver is a specialized high-speed operational amplifier that delivers large current into a transformer-coupled or balanced line while maintaining low distortion and stable signal integrity. Within the power-management and signal-chain hierarchy, the THS6092 belongs to the operational-amplifier family, with applications in communications, networking, and broadband access equipment.

The THS6092 family uses a +12 V supply and provides two output channels per package. According to the Texas Instruments THS6092 product page, the device is a 275 mA ADSL CPE and DSL line driver. Comparison information for the THS6092 identifies a supply current of 7.3 mA per channel and total harmonic distortion of -72 dBc while driving a 25-ohm load at 2 V peak-to-peak. These characteristics make the device appropriate for high-speed line-driving stages that require useful output swing, low distortion, and controlled supply consumption.

The dual-channel architecture reduces the component count in broadband equipment by combining two line-driver channels in one package. Its 8-pin SOIC format supports conventional surface-mount assembly and simplifies inspection after soldering. The SOIC package also has a smaller body than larger power packages, although exposed-pad and heat-sink requirements must still be evaluated from the manufacturer's application guidance when operating continuously near the 275 mA output-current capability.

Typical uses include ADSL customer-premises equipment, DSL line-interface cards, asymmetric digital subscriber line modems, and remote-terminal transmission stages. The same dual-channel topology can also serve other balanced, high-speed line interfaces when the signal amplitude, load, distortion, bandwidth, and supply requirements remain within the device's operating limits.

Design the output return path and line interface carefully because the 275 mA output-current capability creates a meaningful load on the power supply and output network. Check transformer or termination-network behavior across the intended signal bandwidth, and use the manufacturer's recommended decoupling and layout practices to limit distortion and maintain high-frequency stability.

This product page combines the exact manufacturer and distributor findings for the THS6092CDR with package, application, sourcing, and drop-in comparison guidance. It also distinguishes electrically equivalent ordering options from genuine cross-package replacements so engineers can identify which components require a PCB redesign.

Drop-in alternatifler için THS6092CDR — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller THS6092CDR (aynı form faktörü ve ayağa oturma) — farklı olan Package, Product Type, Signal Direction, Temperature Grade, Total Harmonic Distortion.

Texas Instruments
Package: 8-pin SOIC (D)
Product Type: Dual ADSL CPE and DSL line driver
Signal Direction: 2/0 driver
İle Karşılaştır THS6092CDR →

THS6092ID

✅ Yerleştirme
Texas Instruments
📦 SOIC-8
Dual ADSL CPE and DSL line driver · 275 mA · +12 V · 7.3 mA per channel · -72 dBc driving a 25 ohm load at 2 Vpp · 18.4 Vpp · 2 channels · 2/0 driver

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

THS6092IDG4

✅ Yerleştirme
📦 SOIC-8
Identical published THS6092 family electrical ratings of 275 mA, 7.3 mA per channel, and -72 dBc THD; ordering suffix differs.

📋 Katalogda Olmayan Referans Alternatifi

THS6092CDR Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Dual high-speed operational amplifier / DSL line driver
Channel Count 2 channels
Çıkış Konfigürasyonu 2/0 differential driver
Besleme Gerilimi +12 V
Output Current 275 mA
Besleme Akımı 7.3 mA per channel
Total Harmonic Distortion -72 dBc at 2 Vpp into a 25-ohm load
Application ADSL CPE and DSL line driving
Signal Direction Remote terminal to central office
Paket 8-pin SOIC
Package Body Width 3.90 mm
Montaj Türü Surface mount
Terminal Shape Gull wing
Terminal Count 8 terminals
Shipping Package Tube
Temperature Grade Commercial

THS6092CDR tube Pin Yapısı Kılavuzu

THS6092CDR (tube paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

tube paket pin çizelgesi için THS6092CDR

Ayrıntılı pin çıkış verisi mevcut değil: THS6092CDR.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

THS6092CDR için uygundur 6 uygulamas: ADSL Customer Premises Equipment, DSL Remote-Terminal Transmit Path, Broadband Modem Line Interface, Balanced High-Speed Interface, High-Speed Analog Signal Conditioning, Communications Equipment Line Card.

🌐

ADSL Customer Premises Equipment

The THS6092CDR fits the transmit line-driver stage of ADSL customer-premises equipment because its dual channels deliver the 275 mA output-current capability required by a high-speed line interface from one +12 V supply. Each channel draws 7.3 mA according to the published family data, helping control system power while the -72 dBc distortion figure provides a defined linearity target at 2 Vpp into 25 ohms. Place the device between the upstream signal-processing circuitry and the transformer-coupled or terminated DSL line, following the manufacturer reference topology. Confirm the output waveform, load, termination, and power-supply impedance against the design because current capability alone does not establish full bandwidth compliance.

📡

DSL Remote-Terminal Transmit Path

The THS6092CDR is appropriate for the remote-terminal-to-central-office transmit direction identified in the THS6092 family description. Its two channels allow a design to drive paired line outputs efficiently, while the 275 mA output-current rating provides the current headroom expected of a line-driving stage and the +12 V architecture simplifies supply planning. The -72 dBc total harmonic distortion rating applies to the stated 2 Vpp waveform across a 25-ohm load, giving designers a concrete linearity benchmark. Ensure that the line transformer, balancing network, protection structures, and connector path preserve the intended impedance. Review the manufacturer application guidance before adding filtering or protection components that could alter high-frequency behavior.

🖥️

Broadband Modem Line Interface

THS6092CDR can support the high-speed transmit interface of a broadband modem because the device combines two 2/0 driver channels, 275 mA output-current capability, and low published distortion in one 8-pin SOIC package. Operating from +12 V also fits line-interface boards designed around that supply rail. Use the THS6092CDR where the outgoing signal must be amplified into a 25-ohm-class line load and where dual-channel integration reduces board area. The 7.3 mA per-channel supply-current figure helps size the local regulator and bypass network. Before production, verify the modem's required signal bandwidth, peak output level, transformer ratio, and line-termination arrangement against the manufacturer's recommended circuit.

🔧

Balanced High-Speed Interface

The THS6092CDR is useful for a balanced high-speed interface requiring substantial output current rather than a low-capacitance-only signal path. Its dual-channel arrangement can drive two conductors associated with a differential line, and its 275 mA rating offers more drive capability than a general-purpose small-signal amplifier. Published distortion performance is -72 dBc at 2 Vpp into 25 ohms, providing a useful reference for waveform fidelity. The implementation should include controlled return paths, short and direct connections, and supply bypassing arranged according to the manufacturer layout guidance. Validate the interface across the complete frequency range and with realistic line loading, since cable, transformer, and termination parasitics can materially affect gain and stability.

📶

High-Speed Analog Signal Conditioning

The THS6092CDR can be considered for a high-speed analog signal-conditioning path that requires a dual amplifier configured for 2/0 driving. The combination of +12 V operation, 7.3 mA supply current per channel, and 275 mA output-current capability provides a clear operating envelope for driving a downstream balanced stage. Its -72 dBc distortion specification at 2 Vpp into 25 ohms gives a measurable starting point for linearity assessment. The device should not be treated as a universal replacement for every op-amp function because gain, bandwidth, input range, stability, and shutdown requirements must also be checked. Use the manufacturer pin description and characteristic curves to confirm that the configured channel operation supports the intended feedback network and output waveform.

🏭

Communications Equipment Line Card

THS6092CDR is applicable to communications line cards that transmit balanced high-speed signals from central-office or remote termination equipment. Integrating two drivers in an 8-pin SOIC can reduce board area and assembly count compared with separate dual-amplifier packages. The 275 mA output rating and -72 dBc distortion under a 25-ohm, 2 Vpp test condition provide useful design limits for line-driver selection. Because sustained high-current operation concentrates heat around the device outputs, engineers should review copper area, supply impedance, and thermal performance under worst-case line activity. The SOIC package also requires careful lead inspection after reflow, and the board layout should minimize loop area between device outputs, protection elements, and the transformer or termination network.

What is THS6092CDR?
The THS6092CDR is a dual high-speed operational amplifier configured as a 2/0 differential line driver for ADSL CPE and DSL equipment. According to the Texas Instruments THS6092 product page, it operates from a single +12 V supply, provides 275 mA of output current, and is intended to drive signals from the remote terminal toward the central office.
What are the key specifications of THS6092CDR that engineers should know?
The THS6092CDR provides two 2/0 driver channels, a +12 V supply, and up to 275 mA output current in an 8-pin SOIC. According to the Texas Instruments THS6092 product information and the THS6092 family comparison data, supply current is 7.3 mA per channel and total harmonic distortion is -72 dBc when driving 2 Vpp into a 25-ohm load.
Where can I download the THS6092CDR datasheet PDF?
The official Texas Instruments THS6092 product page is the appropriate starting point for the THS6092CDR datasheet and supporting documentation. It identifies the family as a 275 mA, +12 V ADSL CPE and DSL line driver and provides the manufacturer's ordering, quality, application, and technical information. Use the pin-description table and ordering information from that page before assigning PCB tracks.
Where can I find the THS6092CDR pinout?
The THS6092CDR pinout is defined by the manufacturer's THS6092 family datasheet and its 8-pin SOIC drawing. The package is an 8-terminal, gull-wing, surface-mount SOIC with a 3.90 mm body width. Use the manufacturer pin-description table when connecting supply, ground, input, output, and shutdown-related connections rather than inferring polarity from the distributor description.
Is THS6092CDR suitable for ADSL CPE applications?
Yes, the THS6092CDR is specifically suited to ADSL CPE and DSL line-driving applications. According to the Texas Instruments product page, the device is a +12 V, 275 mA line driver intended to send signals from the remote terminal to the central office, matching the high-current, dual-channel requirements of a broadband line-interface stage.
What is the supply current of THS6092CDR?
The THS6092 family draws 7.3 mA of supply current per channel according to the published family comparison information. Because the THS6092CDR contains two channels in one package, channel count and enabled or disabled states must be considered when estimating total supply demand and planning power-distribution capacity.
What distortion does THS6092CDR produce into a 25-ohm load?
The THS6092 family is specified at -72 dBc total harmonic distortion while driving a 25-ohm load at 2 Vpp. This operating condition directly reflects a representative high-speed line-driver load. Confirm that the intended termination, output amplitude, and signal bandwidth remain comparable to this condition when using the device in a new design.
Where can I buy THS6092CDR online?
Use the Request a Quote form on this page to request THS6092CDR pricing, availability, and order handling. The exact commercial terms can change by quantity and shipping requirements, so a current quotation is more reliable than a static price. The part is identified as an 8-SOIC ADSL and DSL driver from Texas Instruments.
What is the price of THS6092CDR?
The current THS6092CDR price is best obtained through the Request a Quote form on this page. Request the quantity, shipping destination, and required tube or reel packaging details so the quote reflects the exact order configuration. Commercial terms are maintained as current structured data rather than embedded as a potentially stale figure in the technical answer.
What is the lead time for THS6092CDR?
Request the current THS6092CDR lead time through the Request a Quote form on this page. Lead time depends on the selected order quantity and current component availability, so it should be confirmed when the purchase order is prepared. The manufacturer lists THS6092CDR in an 8-pin SOIC, and the distributor description identifies commercial-grade tube packaging.
Is THS6092CDR in stock?
Current THS6092CDR stock status should be confirmed through the Request a Quote form on this page. Because inventory and allocation can vary by quantity and order configuration, request a quotation for the needed amount and packaging configuration rather than relying on a static availability statement.
What is the best drop-in replacement for THS6092CDR?
THS6092ID is the closest documented drop-in candidate because it retains the THS6092 family's +12 V, 275 mA, 7.3 mA-per-channel, and -72 dBc characteristics in the same 8-pin SOIC format. Before substitution, verify the exact pin functions, ordering temperature grade, and manufacturer ordering information against the THS6092 family documentation.
Can THS6092ID replace THS6092CDR?
THS6092ID can serve as a candidate replacement for THS6092CDR because the comparison information identifies the same THS6092 family electrical performance and 8-pin SOIC package. The manufacturer ordering table should still be checked for temperature-grade and production-status differences. This page does not classify different THS6092 package options as drop-in replacements.
What is the best Texas Instruments equivalent for THS6092CDR?
THS6092IDG4 is the closest Texas Instruments ordering candidate documented for the THS6092CDR because it belongs to the same family and uses the 8-pin SOIC format. Its core line-driver ratings match the family's +12 V, 275 mA, 7.3 mA-per-channel, and -72 dBc performance. Review the exact ordering table and qualification requirements before production release.
When should I choose THS6092CDR instead of THS6092ID?
Choose THS6092CDR when the original design specifies the commercial-grade THS6092CDR ordering code and the 8-pin SOIC tube configuration. Choose THS6092ID or THS6092IDG4 when its ordering suffix better matches current production requirements while preserving the same family electrical ratings. The decisive checks are the manufacturer ordering table, exact pinout, lifecycle status, and intended temperature grade.
THS6092CDR vs THS6092ID: which is better for an ADSL CPE design?
THS6092CDR and THS6092ID are electrically close members of the same line-driver family, with the published family characteristics of 275 mA output current, 7.3 mA supply current per channel, and -72 dBc distortion into 25 ohms at 2 Vpp. Select based on the ordering suffix, temperature grade, lifecycle status, and current availability validated in the TI ordering table rather than expecting a material performance difference.

Mühendislik referans verileri: THS6092CDR — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose THS6092CDR when the design specifies the original commercial-grade ordering code, requires the 8-pin SOIC implementation, and has been qualified around its +12 V, 275 mA dual-channel line-driver behavior. Choose THS6092ID or THS6092IDG4 when the current Texas Instruments ordering information better matches production needs while retaining the same published electrical ratings and package. These are functionally close choices rather than parts with meaningful noise, current, or distortion separation. The final decision should be based on exact pin functions, operating-temperature grade, lifecycle status, availability, and packaging. Do not substitute the THS6092 PowerPAD or other package variants without redesigning the PCB. For applications that depend on a shutdown pin, verify that feature explicitly because it is not established by the product-page summary.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün THS6092ID THS6092IDG4
Package SOIC-8 SOIC-8 SOIC-8
Brand Texas Instruments Texas Instruments Texas Instruments
Product Function Dual 2/0 ADSL CPE and DSL line driver Dual 2/0 ADSL CPE and DSL line driver Dual 2/0 ADSL CPE and DSL line driver
Supply Voltage +12 V +12 V +12 V
Output Current 275 mA 275 mA 275 mA
Supply Current 7.3 mA per channel 7.3 mA per channel 7.3 mA per channel
Total Harmonic Distortion -72 dBc at 2 Vpp into a 25-ohm load -72 dBc at 2 Vpp into a 25-ohm load -72 dBc at 2 Vpp into a 25-ohm load
Channel Count 2 channels 2 channels 2 channels
Signal Direction Remote terminal to central office Remote terminal to central office Remote terminal to central office

Ana Farklılayıcılar

  • Maintains the documented THS6092 family performance ratings (karşılaştırma:THS6092ID)
  • Provides a documented same-package ordering path (karşılaştırma:THS6092IDG4)
  • Combines two line-driver channels in one compact package (karşılaştırma:THS6092ID)

Tasarım Notları

Plan the +12 V rail for both channel currents and the load-dependent output stage rather than sizing it from the 7.3 mA per-channel supply figure alone. Use low-impedance local decoupling and keep the supply return path short so switching and line-load transients do not add distortion to the output waveform. Check the regulator's transient response and the THS6092 family's absolute maximum and recommended operating conditions before finalizing the rail.

Place input, feedback, bypass, and output components close to their associated device pins. Keep the two high-current output loops compact and preserve a direct ground return from the driver to the local supply-decoupling capacitor. Route the balanced line outputs as a controlled pair, away from sensitive inputs and switching nodes, and follow the manufacturer's layout guidance when adding transformer, termination, or protection components.

The 275 mA output-current capability can create meaningful internal dissipation when driving low-impedance loads, although the exact power depends on the output waveform and quiescent bias. Estimate dissipation using the actual output voltage, load, and supply current, then compare the resulting junction-temperature margin with the package thermal data. Avoid assuming that the small SOIC outline eliminates the need for adequate copper area or thermal review.

Do not compare the -72 dBc distortion rating outside its stated 2 Vpp, 25-ohm-load condition. Also verify whether the selected THS6092 ordering option includes shutdown functionality because the shutdown characteristic is not established by the product-page summary. Review the exact pin-description table and ordering suffix before substituting an ordering code or modifying the PCB.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The commercial temperature grade and surface-mount SOIC construction are identified, but no explicit environmental or material-compliance declarations appear in the available product and distributor information.

İlgili Aramalar

THS6092CDR datasheet THS6092CDR pinout THS6092CDR datasheet pdf THS6092CDR equivalent THS6092CDR replacement THS6092CDR drop-in replacement THS6092CDR price THS6092CDR stock Texas Instruments THS6092CDR THS6092CDR vs THS6092ID THS6092 275mA line driver THS6092CDR ADSL CPE driver THS6092CDR SOIC-8 footprint THS6092CDR schematic THS6092CDR application circuit

İlgili Bileşenler ve Terimler

Texas Instruments THS6092CDR THS6092ID THS6092IDG4 ADSL DSL high-speed operational amplifier line driver 2/0 differential driver ADSL CPE remote terminal unit central office total harmonic distortion THD output current supply current SOIC-8 surface-mount package quadrature amplitude modulation QAM line impedance signal integrity power management
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle