THS6092CDR - 275mA +12V ADSL Driver | Texas Instruments (Tape & Reel)
MPN: THS6092CDR ✓ فعالTHS6092CDR نمای کلی
An ADSL line driver is a specialized high-speed operational amplifier that delivers large current into a transformer-coupled or balanced line while maintaining low distortion and stable signal integrity. Within the power-management and signal-chain hierarchy, the THS6092 belongs to the operational-amplifier family, with applications in communications, networking, and broadband access equipment.
The THS6092 family uses a +12 V supply and provides two output channels per package. According to the Texas Instruments THS6092 product page, the device is a 275 mA ADSL CPE and DSL line driver. Comparison information for the THS6092 identifies a supply current of 7.3 mA per channel and total harmonic distortion of -72 dBc while driving a 25-ohm load at 2 V peak-to-peak. These characteristics make the device appropriate for high-speed line-driving stages that require useful output swing, low distortion, and controlled supply consumption.
The dual-channel architecture reduces the component count in broadband equipment by combining two line-driver channels in one package. Its 8-pin SOIC format supports conventional surface-mount assembly and simplifies inspection after soldering. The SOIC package also has a smaller body than larger power packages, although exposed-pad and heat-sink requirements must still be evaluated from the manufacturer's application guidance when operating continuously near the 275 mA output-current capability.
Typical uses include ADSL customer-premises equipment, DSL line-interface cards, asymmetric digital subscriber line modems, and remote-terminal transmission stages. The same dual-channel topology can also serve other balanced, high-speed line interfaces when the signal amplitude, load, distortion, bandwidth, and supply requirements remain within the device's operating limits.
Design the output return path and line interface carefully because the 275 mA output-current capability creates a meaningful load on the power supply and output network. Check transformer or termination-network behavior across the intended signal bandwidth, and use the manufacturer's recommended decoupling and layout practices to limit distortion and maintain high-frequency stability.
This product page combines the exact manufacturer and distributor findings for the THS6092CDR with package, application, sourcing, and drop-in comparison guidance. It also distinguishes electrically equivalent ordering options from genuine cross-package replacements so engineers can identify which components require a PCB redesign.
جایگزینهای drop-in برای THS6092CDR — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای THS6092CDR (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Product Type, Signal Direction, Temperature Grade, Total Harmonic Distortion.
THS6092ID
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←THS6092IDG4
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
THS6092CDR حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | Dual high-speed operational amplifier / DSL line driver |
| Channel Count | 2 channels |
| پیکربندی خروجی | 2/0 differential driver |
| ولتاژ تغذیه | +12 V |
| Output Current | 275 mA |
| جریان تغذیه | 7.3 mA per channel |
| Total Harmonic Distortion | -72 dBc at 2 Vpp into a 25-ohm load |
| Application | ADSL CPE and DSL line driving |
| Signal Direction | Remote terminal to central office |
| بستهبندی | 8-pin SOIC |
| Package Body Width | 3.90 mm |
| نوع نصب | Surface mount |
| Terminal Shape | Gull wing |
| Terminal Count | 8 terminals |
| Shipping Package | Tube |
| Temperature Grade | Commercial |
راهنمای پیکربندی پین THS6092CDR tube
پیکربندی پین برای THS6092CDR (پکیج tube). این قطعه آنالوگ دارای پینهای ورودی، خروجی و تغذیه است. برای پیکربندیهای پین offset null، جبرانسازی و فعالسازی به دیتاشیت سازنده مراجعه کنید. ایدهآل برای مدارهای شرطیسازی سیگنال و تقویتکننده.
داده پینآوت تفصیلی موجود نیست برای THS6092CDR.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
THS6092CDR مناسب است برای 6 کاربردs: ADSL Customer Premises Equipment, DSL Remote-Terminal Transmit Path, Broadband Modem Line Interface, Balanced High-Speed Interface, High-Speed Analog Signal Conditioning, Communications Equipment Line Card.
ADSL Customer Premises Equipment
The THS6092CDR fits the transmit line-driver stage of ADSL customer-premises equipment because its dual channels deliver the 275 mA output-current capability required by a high-speed line interface from one +12 V supply. Each channel draws 7.3 mA according to the published family data, helping control system power while the -72 dBc distortion figure provides a defined linearity target at 2 Vpp into 25 ohms. Place the device between the upstream signal-processing circuitry and the transformer-coupled or terminated DSL line, following the manufacturer reference topology. Confirm the output waveform, load, termination, and power-supply impedance against the design because current capability alone does not establish full bandwidth compliance.
پیشنهادی
DSL Remote-Terminal Transmit Path
The THS6092CDR is appropriate for the remote-terminal-to-central-office transmit direction identified in the THS6092 family description. Its two channels allow a design to drive paired line outputs efficiently, while the 275 mA output-current rating provides the current headroom expected of a line-driving stage and the +12 V architecture simplifies supply planning. The -72 dBc total harmonic distortion rating applies to the stated 2 Vpp waveform across a 25-ohm load, giving designers a concrete linearity benchmark. Ensure that the line transformer, balancing network, protection structures, and connector path preserve the intended impedance. Review the manufacturer application guidance before adding filtering or protection components that could alter high-frequency behavior.
پیشنهادی
Broadband Modem Line Interface
THS6092CDR can support the high-speed transmit interface of a broadband modem because the device combines two 2/0 driver channels, 275 mA output-current capability, and low published distortion in one 8-pin SOIC package. Operating from +12 V also fits line-interface boards designed around that supply rail. Use the THS6092CDR where the outgoing signal must be amplified into a 25-ohm-class line load and where dual-channel integration reduces board area. The 7.3 mA per-channel supply-current figure helps size the local regulator and bypass network. Before production, verify the modem's required signal bandwidth, peak output level, transformer ratio, and line-termination arrangement against the manufacturer's recommended circuit.
پیشنهادی
Balanced High-Speed Interface
The THS6092CDR is useful for a balanced high-speed interface requiring substantial output current rather than a low-capacitance-only signal path. Its dual-channel arrangement can drive two conductors associated with a differential line, and its 275 mA rating offers more drive capability than a general-purpose small-signal amplifier. Published distortion performance is -72 dBc at 2 Vpp into 25 ohms, providing a useful reference for waveform fidelity. The implementation should include controlled return paths, short and direct connections, and supply bypassing arranged according to the manufacturer layout guidance. Validate the interface across the complete frequency range and with realistic line loading, since cable, transformer, and termination parasitics can materially affect gain and stability.
پیشنهادی
High-Speed Analog Signal Conditioning
The THS6092CDR can be considered for a high-speed analog signal-conditioning path that requires a dual amplifier configured for 2/0 driving. The combination of +12 V operation, 7.3 mA supply current per channel, and 275 mA output-current capability provides a clear operating envelope for driving a downstream balanced stage. Its -72 dBc distortion specification at 2 Vpp into 25 ohms gives a measurable starting point for linearity assessment. The device should not be treated as a universal replacement for every op-amp function because gain, bandwidth, input range, stability, and shutdown requirements must also be checked. Use the manufacturer pin description and characteristic curves to confirm that the configured channel operation supports the intended feedback network and output waveform.
پیشنهادی
Communications Equipment Line Card
THS6092CDR is applicable to communications line cards that transmit balanced high-speed signals from central-office or remote termination equipment. Integrating two drivers in an 8-pin SOIC can reduce board area and assembly count compared with separate dual-amplifier packages. The 275 mA output rating and -72 dBc distortion under a 25-ohm, 2 Vpp test condition provide useful design limits for line-driver selection. Because sustained high-current operation concentrates heat around the device outputs, engineers should review copper area, supply impedance, and thermal performance under worst-case line activity. The SOIC package also requires careful lead inspection after reflow, and the board layout should minimize loop area between device outputs, protection elements, and the transformer or termination network.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای THS6092CDR — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | THS6092ID | THS6092IDG4 |
|---|---|---|---|
| Package | SOIC-8 | SOIC-8 | SOIC-8 |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Function | Dual 2/0 ADSL CPE and DSL line driver | Dual 2/0 ADSL CPE and DSL line driver | Dual 2/0 ADSL CPE and DSL line driver |
| Supply Voltage | +12 V | +12 V | +12 V |
| Output Current | 275 mA | 275 mA | 275 mA |
| Supply Current | 7.3 mA per channel | 7.3 mA per channel | 7.3 mA per channel |
| Total Harmonic Distortion | -72 dBc at 2 Vpp into a 25-ohm load | -72 dBc at 2 Vpp into a 25-ohm load | -72 dBc at 2 Vpp into a 25-ohm load |
| Channel Count | 2 channels | 2 channels | 2 channels |
| Signal Direction | Remote terminal to central office | Remote terminal to central office | Remote terminal to central office |
تفاوتهای کلیدی
- Maintains the documented THS6092 family performance ratings (در مقابلTHS6092ID)
- Provides a documented same-package ordering path (در مقابلTHS6092IDG4)
- Combines two line-driver channels in one compact package (در مقابلTHS6092ID)
یادداشتهای طراحی
Plan the +12 V rail for both channel currents and the load-dependent output stage rather than sizing it from the 7.3 mA per-channel supply figure alone. Use low-impedance local decoupling and keep the supply return path short so switching and line-load transients do not add distortion to the output waveform. Check the regulator's transient response and the THS6092 family's absolute maximum and recommended operating conditions before finalizing the rail.
Place input, feedback, bypass, and output components close to their associated device pins. Keep the two high-current output loops compact and preserve a direct ground return from the driver to the local supply-decoupling capacitor. Route the balanced line outputs as a controlled pair, away from sensitive inputs and switching nodes, and follow the manufacturer's layout guidance when adding transformer, termination, or protection components.
The 275 mA output-current capability can create meaningful internal dissipation when driving low-impedance loads, although the exact power depends on the output waveform and quiescent bias. Estimate dissipation using the actual output voltage, load, and supply current, then compare the resulting junction-temperature margin with the package thermal data. Avoid assuming that the small SOIC outline eliminates the need for adequate copper area or thermal review.
Do not compare the -72 dBc distortion rating outside its stated 2 Vpp, 25-ohm-load condition. Also verify whether the selected THS6092 ordering option includes shutdown functionality because the shutdown characteristic is not established by the product-page summary. Review the exact pin-description table and ordering suffix before substituting an ordering code or modifying the PCB.
اطلاعات انطباق
The commercial temperature grade and surface-mount SOIC construction are identified, but no explicit environmental or material-compliance declarations appear in the available product and distributor information.