TJA1054AT/N - Fault-Tolerant Low-Speed CAN Transceiver | NXP
MPN: TJA1054AT/N ✓ AktifTJA1054AT/N Genel Bakış
A CAN transceiver is an interface IC that connects a digital CAN controller to a physical bus. Unlike ordinary two-wire differential CAN, the fault-tolerant architecture used by the TJA1054A is intended for low-speed in-vehicle networks and adds local wake-up and bus-fault handling functions. Within the product hierarchy, the TJA1054AT/N is a CAN transceiver, an interface IC, and a semiconductor designed for automotive communication networks.
The main feature of the TJA1054AT/N is its ability to replace the PCA82C252T and TJA1053T while retaining their functions because it is pin and downwards compatible with those devices. The TJA1054AT is likewise compatible with the TJA1054T. Its fault-tolerant CAN interface is intended for data rates up to 125 kBd, while the ESD-improved TJA1054A design strengthens its suitability for electrically demanding vehicle networks.
The device also provides local wake-up support through the WAKE pin. According to the NXP TJA1054 documentation, a local wake-up request is detected through an edge followed by a qualifying level exceeding the specified wake-up interval. The transceiver can then assert its INH output high to activate an external supply regulator. This feature is useful in distributed vehicle systems where a node must awaken a local subsystem without waking the entire network.
Typical applications include passenger-car low-speed CAN networks, body and comfort systems, door modules, seat controllers, lighting controllers, climate-control interfaces, and other automotive ECUs connected by low-speed CAN. The TJA1054AT/N is most appropriate when the system specifically requires a fault-tolerant single-wire CAN physical layer and does not require the high-speed differential CAN architecture used by many newer vehicle platforms.
When designing a replacement around this device, verify the physical footprint, exposed functionality, and bus topology. Although the NXP product information identifies compatibility with the PCA82C252T and TJA1053T, a replacement should still be checked for system-level differences in wake-up behavior, supply operation, bus termination, and application timing. Use the manufacturer's pin-description table when assigning PCB nets and the recommended application circuit when selecting external components.
This page combines the confirmed NXP product information, manufacturer datasheet links, package details, compatibility statements, and application guidance. It also organizes practical design considerations and direct replacement questions so engineers can assess the TJA1054AT/N against its documented drop-in-compatible predecessors without confusing low-speed fault-tolerant CAN with high-speed differential CAN.
Drop-in alternatifler için TJA1054AT/N — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
TJA1054T
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
PCA82C252T
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
TJA1053T
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
TJA1054AT/N Özellikler
| Product Type | Fault-tolerant CAN transceiver |
| Supported CAN Data Rate | Up to 125 kBd |
| Target Network | Low-speed CAN in passenger cars |
| Interface Function | CAN protocol controller to physical bus interface |
| ESD Protection Generation | TJA1054A ESD-improved generation |
| Documented Pin Compatibility | PCA82C252T and TJA1053T |
| Documented Family Compatibility | TJA1054T |
| Local Wake-Up Support | WAKE-pin edge and level detection |
| Wake-Up Output | INH asserted high after local wake-up request |
| Paket | 14-pin SO package |
| Montaj Türü | Surface mount |
| Automotive Qualification | AEC-Q100 |
TJA1054AT/N 14-pin so package Pin Yapısı Kılavuzu
TJA1054AT/N (14-pin so package paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: TJA1054AT/N.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
TJA1054AT/N için uygundur 6 uygulamas: Passenger-Car Low-Speed CAN Network, Body and Comfort Control Module, Door and Seat Control ECU, Lighting and Accessory Controller, Vehicle Wake-Up and Regulator Control, Legacy Automotive Network Upgrade.
Passenger-Car Low-Speed CAN Network
The TJA1054AT/N fits the physical layer of a low-speed, fault-tolerant CAN network in passenger vehicles, where NXP specifies operation up to 125 kBd. It connects the vehicle's CAN protocol controller to the bus conductors and provides the fault-tolerant transceiver functions required in this network type. Its 14-pin SO package supports conventional surface-mount PCB construction, while the documented pin and downwards compatibility with the PCA82C252T and TJA1053T assists legacy design maintenance. The principal benefit is retaining a proven low-speed CAN interface architecture while using the ESD-improved TJA1054A family.
Önerilen
Body and Comfort Control Module
The TJA1054AT/N is appropriate for body and comfort-control ECUs that exchange switch, lamp, and sensor information over a low-speed fault-tolerant CAN bus. The transceiver's 125 kBd maximum data rate matches the intended network class, and the TJA1054A generation provides the documented ESD improvement over the original TJA1054. Install it between the node's CAN controller and physical bus interface, then validate timing and bus-fault behavior against the intended vehicle network. This configuration is especially useful when updating an older PCA82C252T-based module without changing its pin arrangement.
Önerilen
Door and Seat Control ECU
A door, seat, or window controller can use the TJA1054AT/N as the fault-tolerant CAN physical-layer interface for distributed vehicle-body commands. Its low-speed operation up to 125 kBd is appropriate for the command and status traffic commonly found in these systems, and the ESD-improved TJA1054A family adds robustness in an electrically harsh environment. Because the device retains the functions of the PCA82C252T and TJA1053T, it can support design consolidation around an existing 14-pin footprint. Validate the exact bus topology, wake-up wiring, and timing before production release.
Önerilen
Lighting and Accessory Controller
The TJA1054AT/N can connect a lighting or accessory controller to a low-speed fault-tolerant CAN network, allowing distributed body-system nodes to exchange commands and status information. The transceiver's documented 125 kBd capability is suitable for this non-real-time control traffic, and the SO-14 format simplifies comparison with established automotive controller layouts. NXP identifies the TJA1054AT as pin and downwards compatible with the PCA82C252T and TJA1053T, which can ease targeted modernization of older accessory modules. Circuit decisions should still follow the manufacturer application diagram for termination and supply decoupling.
Önerilen
Vehicle Wake-Up and Regulator Control
The TJA1054AT/N supports distributed node wake-up in vehicle systems by detecting the WAKE-pin request and asserting INH high to activate an external regulator. This behavior lets a sleeping body or accessory node power only the circuitry needed for the requested operation rather than waking the complete network. The implementation depends on the edge and qualifying-level timing defined by the NXP documentation, so the WAKE network, debounce arrangement, and regulator enable path should be reproduced from the recommended application circuit. The result is a controllable power-up sequence integrated with the low-speed CAN interface.
Önerilen
Legacy Automotive Network Upgrade
The TJA1054AT/N provides a practical modernization path for PCB assemblies designed around the PCA82C252T or TJA1053T. NXP explicitly states that the TJA1054AT is pin and downwards compatible with both predecessors and can replace them while retaining all functions. A production upgrade should nevertheless compare device revisions, ordering suffixes, temperature requirements, timing limits, and qualification records for the target vehicle program. Because the TJA1054A is the ESD-improved version of the TJA1054, it offers a defined functional reason to move forward without changing the established 14-pin footprint.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: TJA1054AT/N — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | TJA1054T | PCA82C252T | TJA1053T |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | SO-14 | SO-14 | SO-14 | SO-14 |
| Product Type | Fault-tolerant CAN transceiver | Fault-tolerant CAN transceiver | CAN transceiver | CAN transceiver |
| ESD Improvement Generation | Yes, TJA1054A generation | Earlier TJA1054 generation | Earlier predecessor generation | Earlier predecessor generation |
| Documented Pin Compatibility | Replaces PCA82C252T and TJA1053T; compatible with TJA1054T | Compatible with TJA1054AT | Replaced by TJA1054AT | Replaced by TJA1054AT |
Ana Farklılayıcılar
- Documented ESD-improved TJA1054A generation (karşılaştırma:TJA1054T)
- Direct functional replacement path for PCA82C252T designs (karşılaştırma:PCA82C252T)
- Direct functional replacement path for TJA1053T designs (karşılaştırma:TJA1053T)
Tasarım Notları
Do not treat ordinary high-speed differential CAN and the TJA1054AT/N fault-tolerant low-speed CAN architecture as interchangeable. The TJA1054 family is intended for passenger-car low-speed networks up to 125 kBd, whereas many newer systems use two-wire high-speed CAN. Confirm the bus topology, termination method, controller expectations, and fault-tolerance requirements before assigning the transceiver to a network.
Use the NXP TJA1054A pin-description table and application circuit when assigning the 14-pin footprint. Preserve the documented WAKE and INH paths, connect the transceiver to the CAN controller correctly, and place required bypass components close to their associated supply pins. Because the product information identifies downward compatibility with the PCA82C252T and TJA1053T, review every reused PCB net rather than assuming every legacy function behaves identically.
Design the wake-up path so INH can activate the intended external regulator without creating an unintended sequence across multiple ECUs. The NXP documentation describes detection of a WAKE-pin edge followed by a qualifying level exceeding the specified wake-up interval. Reproduce that timing network and validate threshold behavior across temperature, supply voltage, noise, and repeated stimulus conditions before using the circuit for production wake-up.
Validate the completed module against the target vehicle's conducted and radiated emissions requirements because a working bus interface can still fail regulatory or system-level EMC testing. Keep CAN routing away from sensitive analog and high-speed clock paths, use the bus and return paths recommended by the application circuit, and inspect connector transient paths. The TJA1054A ESD improvement should be considered alongside, rather than a substitute for, a complete board-level ESD and emissions design.
Uyumluluk Bilgisi
AEC-Q100 automotive qualification is identified in the part-details listing. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or declaration.