NXP Semiconductors

TJA1054AT/N - Fault-Tolerant Low-Speed CAN Transceiver | NXP

MPN: TJA1054AT/N ✓ Aktif
14-pin SO package Package
MOQ: 1 |

TJA1054AT/N Ringkasan

The NXP Semiconductors TJA1054AT/N is a fault-tolerant Controller Area Network transceiver designed for low-speed CAN communication up to 125 kBd, particularly in passenger-car networks. It is an interface between a CAN protocol controller and the physical CAN bus conductors, and it is housed in a 14-pin SO package. The TJA1054A family is an electrostatic-discharge-improved implementation of the TJA1054.

A CAN transceiver is an interface IC that connects a digital CAN controller to a physical bus. Unlike ordinary two-wire differential CAN, the fault-tolerant architecture used by the TJA1054A is intended for low-speed in-vehicle networks and adds local wake-up and bus-fault handling functions. Within the product hierarchy, the TJA1054AT/N is a CAN transceiver, an interface IC, and a semiconductor designed for automotive communication networks.

The main feature of the TJA1054AT/N is its ability to replace the PCA82C252T and TJA1053T while retaining their functions because it is pin and downwards compatible with those devices. The TJA1054AT is likewise compatible with the TJA1054T. Its fault-tolerant CAN interface is intended for data rates up to 125 kBd, while the ESD-improved TJA1054A design strengthens its suitability for electrically demanding vehicle networks.

The device also provides local wake-up support through the WAKE pin. According to the NXP TJA1054 documentation, a local wake-up request is detected through an edge followed by a qualifying level exceeding the specified wake-up interval. The transceiver can then assert its INH output high to activate an external supply regulator. This feature is useful in distributed vehicle systems where a node must awaken a local subsystem without waking the entire network.

Typical applications include passenger-car low-speed CAN networks, body and comfort systems, door modules, seat controllers, lighting controllers, climate-control interfaces, and other automotive ECUs connected by low-speed CAN. The TJA1054AT/N is most appropriate when the system specifically requires a fault-tolerant single-wire CAN physical layer and does not require the high-speed differential CAN architecture used by many newer vehicle platforms.

When designing a replacement around this device, verify the physical footprint, exposed functionality, and bus topology. Although the NXP product information identifies compatibility with the PCA82C252T and TJA1053T, a replacement should still be checked for system-level differences in wake-up behavior, supply operation, bus termination, and application timing. Use the manufacturer's pin-description table when assigning PCB nets and the recommended application circuit when selecting external components.

This page combines the confirmed NXP product information, manufacturer datasheet links, package details, compatibility statements, and application guidance. It also organizes practical design considerations and direct replacement questions so engineers can assess the TJA1054AT/N against its documented drop-in-compatible predecessors without confusing low-speed fault-tolerant CAN with high-speed differential CAN.

Pilihan pengganti yang segera untuk TJA1054AT/N — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

TJA1054T

✅ Masuk Drop-In
📦 SO-14
Earlier TJA1054 generation without the documented TJA1054A ESD improvement; CAN data-rate function remains aligned at up to 125 kBd

📋 Alternatif rujukan (tidak dalam katalog)

PCA82C252T

✅ Masuk Drop-In
📦 SO-14
Documented pin and downwards-compatible predecessor; TJA1054AT adds the TJA1054A ESD-improved generation while retaining all predecessor functions

📋 Alternatif rujukan (tidak dalam katalog)

TJA1053T

✅ Masuk Drop-In
📦 SO-14
Documented pin and downwards-compatible predecessor; the TJA1054AT retains all functions and adds the TJA1054A ESD-improved generation

📋 Alternatif rujukan (tidak dalam katalog)

TJA1054AT/N Spesifikasi

Product Type Fault-tolerant CAN transceiver
Supported CAN Data Rate Up to 125 kBd
Target Network Low-speed CAN in passenger cars
Interface Function CAN protocol controller to physical bus interface
ESD Protection Generation TJA1054A ESD-improved generation
Documented Pin Compatibility PCA82C252T and TJA1053T
Documented Family Compatibility TJA1054T
Local Wake-Up Support WAKE-pin edge and level detection
Wake-Up Output INH asserted high after local wake-up request
Kemasan 14-pin SO package
Jenis Pemasangan Surface mount
Automotive Qualification AEC-Q100

Panduan Konfigurasi Pin TJA1054AT/N 14-pin so package

Konfigurasi pin untuk TJA1054AT/N (14-pin so package pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 14-pin so package untuk TJA1054AT/N

Tiada data garisan pin yang diperoleh untuk TJA1054AT/N.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

TJA1054AT/N patut untuk 6 aplikasis: Passenger-Car Low-Speed CAN Network, Body and Comfort Control Module, Door and Seat Control ECU, Lighting and Accessory Controller, Vehicle Wake-Up and Regulator Control, Legacy Automotive Network Upgrade.

🚗

Passenger-Car Low-Speed CAN Network

The TJA1054AT/N fits the physical layer of a low-speed, fault-tolerant CAN network in passenger vehicles, where NXP specifies operation up to 125 kBd. It connects the vehicle's CAN protocol controller to the bus conductors and provides the fault-tolerant transceiver functions required in this network type. Its 14-pin SO package supports conventional surface-mount PCB construction, while the documented pin and downwards compatibility with the PCA82C252T and TJA1053T assists legacy design maintenance. The principal benefit is retaining a proven low-speed CAN interface architecture while using the ESD-improved TJA1054A family.

🚗

Body and Comfort Control Module

The TJA1054AT/N is appropriate for body and comfort-control ECUs that exchange switch, lamp, and sensor information over a low-speed fault-tolerant CAN bus. The transceiver's 125 kBd maximum data rate matches the intended network class, and the TJA1054A generation provides the documented ESD improvement over the original TJA1054. Install it between the node's CAN controller and physical bus interface, then validate timing and bus-fault behavior against the intended vehicle network. This configuration is especially useful when updating an older PCA82C252T-based module without changing its pin arrangement.

🚗

Door and Seat Control ECU

A door, seat, or window controller can use the TJA1054AT/N as the fault-tolerant CAN physical-layer interface for distributed vehicle-body commands. Its low-speed operation up to 125 kBd is appropriate for the command and status traffic commonly found in these systems, and the ESD-improved TJA1054A family adds robustness in an electrically harsh environment. Because the device retains the functions of the PCA82C252T and TJA1053T, it can support design consolidation around an existing 14-pin footprint. Validate the exact bus topology, wake-up wiring, and timing before production release.

💡

Lighting and Accessory Controller

The TJA1054AT/N can connect a lighting or accessory controller to a low-speed fault-tolerant CAN network, allowing distributed body-system nodes to exchange commands and status information. The transceiver's documented 125 kBd capability is suitable for this non-real-time control traffic, and the SO-14 format simplifies comparison with established automotive controller layouts. NXP identifies the TJA1054AT as pin and downwards compatible with the PCA82C252T and TJA1053T, which can ease targeted modernization of older accessory modules. Circuit decisions should still follow the manufacturer application diagram for termination and supply decoupling.

⚡

Vehicle Wake-Up and Regulator Control

The TJA1054AT/N supports distributed node wake-up in vehicle systems by detecting the WAKE-pin request and asserting INH high to activate an external regulator. This behavior lets a sleeping body or accessory node power only the circuitry needed for the requested operation rather than waking the complete network. The implementation depends on the edge and qualifying-level timing defined by the NXP documentation, so the WAKE network, debounce arrangement, and regulator enable path should be reproduced from the recommended application circuit. The result is a controllable power-up sequence integrated with the low-speed CAN interface.

🔧

Legacy Automotive Network Upgrade

The TJA1054AT/N provides a practical modernization path for PCB assemblies designed around the PCA82C252T or TJA1053T. NXP explicitly states that the TJA1054AT is pin and downwards compatible with both predecessors and can replace them while retaining all functions. A production upgrade should nevertheless compare device revisions, ordering suffixes, temperature requirements, timing limits, and qualification records for the target vehicle program. Because the TJA1054A is the ESD-improved version of the TJA1054, it offers a defined functional reason to move forward without changing the established 14-pin footprint.

Ringkasan Produk Disebarkan

PCA82C252T Documented pin-compatible predecessor Dipergunakan di: Passenger-Car Low-Speed CAN Network, Body and Comfort Control Module, Lighting and Accessory Controller, Legacy Automotive Network Upgrade TJA1053T Documented pin-compatible predecessor Dipergunakan di: Passenger-Car Low-Speed CAN Network, Door and Seat Control ECU, Vehicle Wake-Up and Regulator Control, Legacy Automotive Network Upgrade TJA1054T Compatible fault-tolerant CAN transceiver Dipergunakan di: Body and Comfort Control Module, Door and Seat Control ECU, Lighting and Accessory Controller, Vehicle Wake-Up and Regulator Control, Legacy Automotive Network Upgrade
What is the TJA1054AT/N and what is its maximum CAN data rate?
The TJA1054AT/N is an NXP Semiconductors fault-tolerant CAN transceiver for low-speed in-vehicle networks, operating at data rates up to 125 kBd. According to the NXP TJA1054 product documentation, it interfaces a CAN protocol controller with the physical bus conductors and is intended primarily for passenger-car applications. It is packaged in a 14-pin SO package and belongs to the TJA1054A ESD-improved family.
Where can I download the TJA1054AT datasheet PDF?
The TJA1054A manufacturer datasheet is available from NXP at https://www.nxp.com/docs/en/data-sheet/TJA1054A.pdf, while the related TJA1054 document is available at https://www.nxp.com/docs/en/data-sheet/TJA1054.pdf. The manufacturer also provides a product-information page at https://www.nxp.com/part/TJA1054AT. Use the NXP TJA1054A document for the ESD-improved device family and the product page for current ordering information.
What can replace the TJA1054AT/N on an existing PCB?
The NXP product page explicitly states that the TJA1054AT is pin and downwards compatible with the PCA82C252T and TJA1053T, allowing either device to be replaced while retaining all functions. The TJA1054T is also identified as a compatible family member. Final replacement approval should still include checks of package footprint, application timing, wake-up behavior, supply requirements, and the low-speed fault-tolerant CAN bus topology.
Is the TJA1054AT/N a drop-in replacement for the TJA1054T?
Yes, NXP identifies the TJA1054AT as compatible with the TJA1054T, including the relevant pin and downwards compatibility described for the TJA1054A family. This makes the TJA1054AT a documented same-footprint replacement candidate for existing TJA1054T designs. Engineers should nevertheless compare the exact ordering variants, temperature grades, ESD ratings, and lifecycle requirements before approving a production substitution.
What is the difference between TJA1054AT/N and TJA1054T?
The TJA1054AT belongs to the TJA1054A ESD-improved family, whereas the TJA1054T is the earlier fault-tolerant CAN transceiver. NXP states that the TJA1054AT remains compatible with the TJA1054T. The principal documented family-level distinction is the ESD improvement; individual ordering suffixes can also encode package and temperature information, so those attributes should be checked before substitution.
Can the PCA82C252T or TJA1053T replace the TJA1054AT/N?
The PCA82C252T and TJA1053T are documented predecessors that can be replaced by the TJA1054AT while retaining all functions. This statement establishes pin and downwards compatibility, but it does not by itself prove that every electrical timing, qualification, or application detail is identical. Use the NXP datasheets to compare the relevant operating limits, wake-up implementation, and test requirements before changing an approved automotive design.
TJA1054AT/N vs TJA1057GTK/3Z — which CAN transceiver fits a low-speed car network?
Choose the TJA1054AT/N when the network specifically requires the fault-tolerant low-speed CAN architecture described for passenger-car systems, with operation up to 125 kBd. The TJA1057GTK/3Z belongs to a different CAN transceiver family and package arrangement, so it should not be assumed to be a pin-for-pin substitute. Confirm the required bus topology, data rate, supply voltage, wake-up functions, and footprint before choosing between them.
When should I choose the TJA1054AT/N over the PCA82C252T?
Choose the TJA1054AT/N when an existing PCA82C252T design can benefit from the TJA1054A family's documented ESD improvement while retaining the predecessor's functions and pin compatibility. It is specifically appropriate for low-speed fault-tolerant CAN networks used in passenger vehicles. Retain the original device if a system has not completed an electrical, timing, qualification, and lifecycle review of the change.
Is the TJA1054AT/N suitable for a low-speed CAN body-control module?
Yes, the TJA1054AT/N is suitable for a low-speed CAN body-control module when the bus is a fault-tolerant passenger-car network operating at no more than 125 kBd. Its controller-to-bus interface role, documented local wake-up behavior, and compatibility with established TJA1054-family hardware fit this use case. The exact module power architecture and wake-up timing must still follow the NXP application guidance.
How does local wake-up work in the TJA1054AT/N?
The TJA1054AT/N detects a local wake-up request through the WAKE pin when an edge is followed by a qualifying level exceeding the specified maximum wake-up interval. After recognizing the request, the transceiver asserts INH high, allowing an external regulator to activate. This enables a distributed node to wake a local subsystem without requiring a complete network wake-up.
Where can I find the TJA1054AT pinout?
The TJA1054AT pinout and detailed pin descriptions are located in the NXP TJA1054A manufacturer datasheet at https://www.nxp.com/docs/en/data-sheet/TJA1054A.pdf. Use the pin-description table and application-circuit diagrams when assigning PCB nets. The 14-pin SO outline must also be checked against the selected ordering suffix before fabrication, because suffix codes can identify different package and temperature configurations.
Where can I buy the TJA1054AT/N and check its current lead time?
Use the Request a Quote form on this page to ask about TJA1054AT/N availability, current lead time, minimum order quantity, and the exact packaging suffix required for the design. The form avoids presenting a potentially stale catalog figure as current inventory. Include the complete MPN, required quantity, and destination country so the quotation reflects the correct order configuration.
What is the price of the TJA1054AT/N?
Use the Request a Quote form on this page for a current TJA1054AT/N quotation because pricing and stock can vary with quantity, package suffix, and supply conditions. No fixed unit price is embedded in this technical description. State the exact MPN TJA1054AT/N and your required production quantity when requesting the quotation.
Is the TJA1054AT/N in stock?
Current stock status for TJA1054AT/N should be confirmed through the Request a Quote form on this page rather than inferred from a general distributor listing. Include the required quantity, target date, and exact suffix so the response reflects orderable supply rather than a broad family-level availability statement. The NXP product page remains the authoritative source for current product documentation.
What are the key specifications of TJA1054AT/N that engineers should know?
The TJA1054AT/N is a 14-pin SO fault-tolerant CAN transceiver for low-speed passenger-car networks, supporting data rates up to 125 kBd. It is an ESD-improved TJA1054A-family device, is compatible with the TJA1054T, and can replace the PCA82C252T and TJA1053T while retaining their functions. Its local wake-up input can assert INH to activate an external regulator, making it suitable for distributed automotive body and comfort systems.

Data referensi kejuruteraan untuk TJA1054AT/N — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the TJA1054AT/N for a low-speed, fault-tolerant passenger-car CAN network, particularly when maintaining or updating a design based on the PCA82C252T, TJA1053T, or TJA1054T. Its main benefit over the TJA1054T is the documented ESD-improved TJA1054A generation, while its compatibility with the two older predecessors allows function retention with minimal board-layout change. The device is not the automatic choice for a high-speed differential CAN network, and the TJA1057GTK/3Z should not be treated as a footprint-compatible substitute without separate engineering review. Before selecting an ordering variant, verify the package suffix, temperature range, supply limits, timing values, qualification status, and local wake-up requirements. For new designs, reproduce the NXP application circuit and validate EMC behavior; for legacy designs, perform a systematic pin-by-pin and timing comparison with the originally installed device.

Perbandingan dengan Gantian

Parametr Produk Ini TJA1054T PCA82C252T TJA1053T
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package SO-14 SO-14 SO-14 SO-14
Product Type Fault-tolerant CAN transceiver Fault-tolerant CAN transceiver CAN transceiver CAN transceiver
ESD Improvement Generation Yes, TJA1054A generation Earlier TJA1054 generation Earlier predecessor generation Earlier predecessor generation
Documented Pin Compatibility Replaces PCA82C252T and TJA1053T; compatible with TJA1054T Compatible with TJA1054AT Replaced by TJA1054AT Replaced by TJA1054AT

Penyeberangsung Jelas

  • Documented ESD-improved TJA1054A generation (vsTJA1054T)
  • Direct functional replacement path for PCA82C252T designs (vsPCA82C252T)
  • Direct functional replacement path for TJA1053T designs (vsTJA1053T)

Catatan Desain

Do not treat ordinary high-speed differential CAN and the TJA1054AT/N fault-tolerant low-speed CAN architecture as interchangeable. The TJA1054 family is intended for passenger-car low-speed networks up to 125 kBd, whereas many newer systems use two-wire high-speed CAN. Confirm the bus topology, termination method, controller expectations, and fault-tolerance requirements before assigning the transceiver to a network.

Use the NXP TJA1054A pin-description table and application circuit when assigning the 14-pin footprint. Preserve the documented WAKE and INH paths, connect the transceiver to the CAN controller correctly, and place required bypass components close to their associated supply pins. Because the product information identifies downward compatibility with the PCA82C252T and TJA1053T, review every reused PCB net rather than assuming every legacy function behaves identically.

Design the wake-up path so INH can activate the intended external regulator without creating an unintended sequence across multiple ECUs. The NXP documentation describes detection of a WAKE-pin edge followed by a qualifying level exceeding the specified wake-up interval. Reproduce that timing network and validate threshold behavior across temperature, supply voltage, noise, and repeated stimulus conditions before using the circuit for production wake-up.

Validate the completed module against the target vehicle's conducted and radiated emissions requirements because a working bus interface can still fail regulatory or system-level EMC testing. Keep CAN routing away from sensitive analog and high-speed clock paths, use the bus and return paths recommended by the application circuit, and inspect connector transient paths. The TJA1054A ESD improvement should be considered alongside, rather than a substitute for, a complete board-level ESD and emissions design.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

AEC-Q100 automotive qualification is identified in the part-details listing. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or declaration.

Pencarian Berhubungan

tja1054at datasheet tja1054at ic datasheet nxp tja1054at TJA1054AT/N datasheet pdf TJA1054AT pinout TJA1054AT replacement TJA1054AT equivalent TJA1054AT vs TJA1054T TJA1054AT drop-in replacement TJA1054AT cross reference TJA1054AT SO-14 footprint TJA1054AT low-speed CAN TJA1054AT automotive transceiver TJA1054AT price TJA1054AT stock

Komponen dan Tanda berkaitan

NXP Semiconductors TJA1054AT/N TJA1054AT TJA1054T PCA82C252T TJA1053T TJA1054A CAN transceiver Controller Area Network low-speed CAN fault-tolerant CAN interface IC automotive network local wake-up WAKE pin INH output ESD protection AEC-Q100 SO-14 package surface mount 125 kBd passenger-car electronics body control module CAN protocol controller
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ