Texas Instruments

TLV2455IN - 4-Channel 6V 220kHz RRIO Op Amp | Texas Instruments

MPN: TLV2455IN ✓ Aktif
6 V Vdss 23 µA typical Id 16-pin DIP (16-PDIP) Package
MOQ: 1 |

TLV2455IN Genel Bakış

The Texas Instruments TLV2455IN is a four-channel, rail-to-rail input/output operational amplifier with shutdown, a 6 V supply rating, 220 kHz gain-bandwidth product, and low 23 µA quiescent current per channel. The device is packaged in a 16-pin through-hole DIP and is intended for low-voltage instrumentation, signal-conditioning, filtering, and portable analog systems. Its four amplifiers share one package, allowing compact implementation of multi-channel signal chains without using four separate monolithic packages.

An operational amplifier is an analog signal-processing IC that compares its inverting and non-inverting inputs and amplifies the voltage difference between them. The TLV2455IN belongs to the low-dropout linear-amplifier family of voltage-feedback operational amplifiers, combining rail-to-rail input and output operation with low supply current. Rail-to-rail input capability supports sensing signals near the supply rails, while rail-to-rail output allows the output voltage to approach either supply limit within the device's operating limits.

The principal electrical characteristics are a 220 kHz gain-bandwidth product, 23 µA typical quiescent current per channel, a 6 V supply rating, rail-to-rail input and output operation, a shutdown function, and 20 µV typical input offset voltage. The 220 kHz bandwidth supports moderate-frequency amplification and active filtering, while the four-channel configuration is useful for sensor buffers, differential stages, and multi-axis signal processing.

Each amplifier can be configured with external resistors for noninverting, inverting, differential, filtering, or gain-control circuits. The low quiescent current is particularly valuable in battery-powered equipment where every amplifier channel contributes continuously to system power consumption. The shutdown feature can also reduce consumption when the analog section is not required, provided the enable logic and supply states meet the manufacturer's operating requirements.

Typical uses include portable instrumentation, low-voltage sensor interfaces, audio and control-signal conditioning, active filters, and four-channel acquisition front ends. When designing the board, place each amplifier's feedback components close to its pins, keep input and output traces short, provide suitable bypassing at the supply pins, and avoid placing sensitive high-impedance inputs next to switching or high-current return paths.

This product page combines manufacturer specifications, an electrically equivalent same-package option, application guidance, and package-aware design considerations. It helps engineers distinguish the TLV2455IN's shutdown-enabled function from other quad amplifier variants and plan a direct replacement without changing the 16-pin DIP footprint.

Drop-in alternatifler için TLV2455IN — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller TLV2455IN (aynı form faktörü ve ayağa oturma) — farklı olan Amplifier Type.

Texas Instruments
Amplifier Type: Quad general-purpose operational amplifier
İle Karşılaştır TLV2455IN →

TLV2455CN

✅ Yerleştirme
Texas Instruments
📦 16-pin DIP (16-PDIP)
Quad general-purpose operational amplifier · 4 circuits · Rail-to-rail · Rail-to-rail · 220 kHz · 23 uA typical per amplifier · Yes · 16-pin PDIP

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

TLV2455IN Maksimum Değerlendirmeler & Elektriksel Özellikler

Number of Amplifier Channels 4 channels
Amplifier Type General-purpose operational amplifier
Supply Voltage Rating 6 V
Gain-Bandwidth Product 220 kHz
Quiescent Current per Channel 23 µA typical
Input Offset Voltage 20 µV typical
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Shutdown Function Yes
Paket 16-pin DIP (16-PDIP)
Montaj Türü Through-hole

TLV2455IN 16-pin dip (16-pdip) Pin Yapısı Kılavuzu

TLV2455IN (16-pin dip (16-pdip) paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

16-pin dip (16-pdip) paket pin çizelgesi için TLV2455IN

Ayrıntılı pin çıkış verisi mevcut değil: TLV2455IN.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

TLV2455IN için uygundur 6 uygulamas: Portable Sensor Signal Conditioning, Low-Voltage Active Filters, Multi-Axis Instrumentation, Battery-Powered Data Acquisition, Audio and Control Signal Conditioning, Industrial Process Measurement.

📱

Portable Sensor Signal Conditioning

The TLV2455IN fits portable sensor front ends because its four channels provide rail-to-rail input and output operation while each amplifier consumes 23 µA typical quiescent current. Place the device close to the sensor interface and use one channel for buffering, another for gain, and the remaining channels for filtering or reference conditioning. Its 220 kHz gain-bandwidth product handles moderate-bandwidth sensor signals, but engineers should confirm input bias current and offset behavior against the sensor's source impedance. The 16-PDIP package also makes the part suitable for through-hole prototypes and industrial assembly fixtures.

⚡

Low-Voltage Active Filters

The TLV2455IN is useful for multiple active-filter stages because four independent amplifiers are integrated into one 16-pin DIP package. Its 220 kHz gain-bandwidth product supports filter sections operating well below the device's upper small-signal bandwidth, while rail-to-rail input and output behavior improves dynamic range in low-voltage systems. Designers can implement cascaded single-pole, multiple-feedback, or state-variable filters, subject to the final gain and stability requirements. External resistor accuracy and the amplifier's offset, slew rate, and output-drive limits should be evaluated during simulation.

🏭

Multi-Axis Instrumentation

The TLV2455IN suits multi-axis instrumentation where several low-bandwidth analog channels must be amplified near the system supply rails. Four channels in one package reduce the number of separate amplifier components and simplify power-distribution design. The rail-to-rail input range supports sensing close to the supply limits, and the 220 kHz gain-bandwidth product is suitable for many position, force, and motion-sensor signals after appropriate filtering. Use matched resistors when channel gain consistency matters, and verify bias-current effects for high-impedance sensor sources before finalizing the input network.

🔋

Battery-Powered Data Acquisition

The TLV2455IN supports battery-powered data-acquisition systems by combining four amplifier channels with 23 µA typical quiescent current per channel. Rail-to-rail input and output operation allows the circuit to use a limited supply range efficiently, and the shutdown feature can lower consumption when acquisition stops. Use the channels to amplify and filter several inputs without distributing power across four separate packages. Account for load current and output activity in the overall battery budget, and consult the manufacturer datasheet for the exact enable-state behavior and supply conditions before sequencing the analog system.

🎧

Audio and Control Signal Conditioning

The TLV2455IN can condition low-frequency audio, control, or feedback signals in compact multi-channel analog circuits. Its rail-to-rail I/O operation helps preserve signal range in low-voltage equipment, while four channels allow simultaneous handling of monitoring, drive, and feedback paths. The 220 kHz gain-bandwidth product is appropriate for many control and audio-bandwidth signals rather than high-frequency line audio. Validate output swing into the intended load, confirm slew-rate requirements during large-signal transitions, and keep the shutdown state inactive whenever the monitored signals must remain continuous.

🖥️

Industrial Process Measurement

The TLV2455IN fits industrial process-measurement modules that acquire several low-bandwidth sensor channels from a common low-voltage supply. Four channels in one 16-PDIP package support channel buffering, differential conversion, filtering, and scaling while retaining rail-to-rail signal range. The 23 µA typical quiescent current per channel supports low-power distributed measurement nodes, and shutdown can assist duty-cycled operation. Validate the production temperature grade, common-mode limits, input bias current, and output capability against the specific transducer and process-control requirements before deployment.

What are the key specifications of TLV2455IN that engineers should know?
The TLV2455IN is a four-channel, 6 V, 220 kHz rail-to-rail input/output operational amplifier with 23 µA typical quiescent current per channel and shutdown support. According to the Texas Instruments TLV2455 product page, the family combines a 220 kHz gain-bandwidth product with low-power operation, while the TLV2455IN order code is identified as a 16-PDIP device. These characteristics make it suitable for portable instrumentation, multi-axis sensing, buffering, and moderate-frequency filter circuits.
Where can I download the TLV2455IN datasheet PDF?
The official TLV2455IN documentation is available from the Texas Instruments TLV2455 product page at https://www.ti.com/product/TLV2455. The page links to the manufacturer datasheet and ordering information for the TLV2455 family. Use the pin-description table and electrical-characteristics tables in that document when assigning PCB functions, checking supply limits, and designing shutdown-control logic.
Where can I find the TLV2455IN pinout?
Use the pin-description table in the Texas Instruments TLV2455 datasheet to identify all 16 pins and the shutdown-control connections. The verified product listing identifies TLV2455IN as a 16-PDIP, general-purpose, four-circuit amplifier. Because an authoritative pin-number-to-signal table is not reproduced on this page, assign the physical PCB footprint only after matching the package drawing and pin table in the manufacturer datasheet.
What is the operating voltage of the TLV2455IN?
The TLV2455IN has a 6 V supply rating, making it suitable for low-voltage analog systems. The exact minimum and maximum operating supply voltages and their test conditions should be taken from the Electrical Characteristics table in the Texas Instruments TLV2455 datasheet. Confirm those limits for the selected temperature grade before designing a 5 V rail, battery source, or any system where the supply can overshoot.
What is the gain-bandwidth product of TLV2455IN?
The TLV2455IN has a 220 kHz gain-bandwidth product, as stated on the Texas Instruments product page and in the family datasheet description. This bandwidth is appropriate for low-frequency precision signal conditioning, sensor amplification, and active filtering, but it limits closed-loop response when high closed-loop gain is used. Calculate the expected closed-loop bandwidth from the selected noise gain and verify stability and output-swing requirements in the manufacturer datasheet.
Why is TLV2455IN suitable for battery-powered instrumentation?
The TLV2455IN consumes 23 µA typical quiescent current per channel and combines four amplifiers in one 16-pin DIP package. According to the Texas Instruments product description, the family is designed around low quiescent current and rail-to-rail operation. These features help preserve battery life and support signal conditioning near supply-rail levels, while the shutdown function can reduce consumption when the analog circuitry is not needed.
What is the difference between TLV2455IN and TLV2455CN?
The TLV2455IN and TLV2455CN are both listed as 16-DIP, 220 kHz, rail-to-rail four-channel operational amplifiers, making TLV2455CN a close same-package option. The manufacturer suffix indicates different device grades or specifications, so do not assume every electrical limit is identical. Compare temperature range, offset voltage, shutdown behavior, and production-grade requirements against the Texas Instruments datasheet before substituting one order code for the other.
Can TLV2455CN replace TLV2455IN in a 16-DIP circuit?
TLV2455CN is a candidate drop-in replacement because the cross-reference listing describes both TLV2455IN and TLV2455CN as 16-DIP, 220 kHz, rail-to-rail quad amplifiers. Before installation, verify that the shutdown pin, supply limits, input/output common-mode behavior, offset limits, temperature range, and electrical grade remain acceptable for the target circuit. A matching package does not by itself guarantee identical production specifications.
What is the best drop-in replacement for TLV2455IN?
TLV2455CN is the closest identified same-package option, because both devices are described as 16-DIP, 220 kHz, rail-to-rail quad operational amplifiers. It should still be treated as a qualified substitute requiring review of the manufacturer's ordering table and electrical characteristics. Only five drop-in alternatives could be substantiated, so request manufacturer guidance if shutdown behavior or grade-specific requirements cannot be reconciled.
When should I choose TLV2455IN instead of TLV2455CN?
Choose TLV2455IN when its exact ordering-grade electrical characteristics and temperature range satisfy the design and TLV2455CN does not, or when continuity with the original TLV2455IN specification is required. Both are identified as 16-DIP, 220 kHz, rail-to-rail quad amplifiers. The decisive distinction is grade-specific performance rather than package size, so review the ordering information and datasheet limits for the installed application.
Is TLV2455IN suitable for sensor signal conditioning?
The TLV2455IN is suitable for many low-voltage sensor signal-conditioning tasks because it provides rail-to-rail input and output operation, 220 kHz gain-bandwidth product, and four amplifier channels in one 16-PDIP package. It can buffer sensor outputs, implement differential amplification, and build active filters. Check input bias current and offset behavior against the sensor source impedance, and keep sensitive input traces short and away from noisy switching paths.
Can I use TLV2455IN for active filter designs?
Yes, the TLV2455IN can be used in active filters whose operating bandwidth remains compatible with its 220 kHz gain-bandwidth product. The four independent channels allow a state-variable, multiple-feedback, or cascaded filtering arrangement in one package. Confirm resistor values against the desired gain, bandwidth, and stability requirements, then verify the final response because op-amp noise, offset, slew rate, and load capability can alter real filter performance.
What is the power consumption of TLV2455IN?
The TLV2455IN draws 23 µA typical quiescent current per amplifier channel according to the Texas Instruments family description. For four continuously active channels, the estimated amplifier quiescent-current total is 92 µA when each channel is biased at its typical quiescent current. Actual supply consumption also depends on output swing, load current, operating voltage, and whether the shutdown function is asserted.
Where can I buy TLV2455IN online?
Use the Request a Quote form on this page to request TLV2455IN availability, current pricing, and lead time. The form allows the purchasing team to identify the exact TLV2455IN order code, 16-pin package, required quantity, and shipment destination. Avoid substituting a different suffix, temperature grade, package, or amplifier variant without first checking the manufacturer ordering information and the circuit requirements.
What is the price of TLV2455IN?
Current TLV2455IN pricing is not stated as a fixed figure on this page. Submit the Request a Quote form with the exact MPN, quantity, and packaging requirement to receive a current quotation. The manufacturer listing identifies TLV2455IN as a 16-PDIP, so include that package information when requesting pricing and avoid changing the order code during quotation.
What is the lead time and stock status for TLV2455IN?
Current stock and lead time for TLV2455IN should be confirmed through the Request a Quote form on this page. The manufacturer product page provides device status and ordering information, while the listing identifies the exact 16-PDIP order code. Provide the required quantity, shipment location, and production schedule with the inquiry so the supplier can return an accurate availability and delivery commitment.

Mühendislik referans verileri: TLV2455IN — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose TLV2455IN for low-voltage, four-channel analog designs that require rail-to-rail input and output operation, 220 kHz gain-bandwidth product, and low 23 µA typical quiescent current per channel. Its shutdown function is valuable in portable, battery-powered, or duty-cycled systems, while the 16-PDIP package suits through-hole prototypes and industrial assemblies. TLV2455CN is the closest identified drop-in option because it shares the 16-DIP package, four-channel configuration, 220 kHz bandwidth, and rail-to-rail operation. Select it only after checking the manufacturer ordering table for differences in temperature grade, offset limits, lifecycle status, and test conditions. Neither option should replace a high-speed, high-current, precision, or automotive-qualified amplifier without a complete specification review.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün TLV2455CN
Brand Texas Instruments Texas Instruments
Package 16-pin DIP (16-PDIP) 16-DIP - same package
Number of Amplifier Channels 4 channels 4 channels
Supply Voltage Rating 6 V 6 V
Gain-Bandwidth Product 220 kHz 220 kHz
Quiescent Current per Channel 23 µA typical 23 µA typical
Input Common-Mode Range Rail-to-rail Rail-to-rail
Output Swing Rail-to-rail Rail-to-rail
Shutdown Function Yes Yes

Ana Farklılayıcılar

  • Four channels in one low-power amplifier package (karşılaştırma:TLV2455CN)
  • Rail-to-rail signal range in a 16-pin DIP (karşılaştırma:TLV2455CN)
  • Shutdown-capable low-power operation (karşılaştırma:TLV2455CN)

Tasarım Notları

Route each amplifier's high-impedance input directly to its pin and place feedback resistors close to the corresponding amplifier inputs and outputs. Keep the 16-PDIP footprint free of unintended copper keepouts around the shutdown and supply pins, and provide a clean ground reference for all four channels. Because the device is intended for low-voltage instrumentation, long parallel input traces can increase coupling from adjacent digital or switching nodes.

Decouple the supply pins with local high-frequency bypass capacitance and add bulk capacitance near the power entry according to the manufacturer's recommended circuit. The family is specified at 23 µA typical quiescent current per channel, but the actual supply current also rises with output activity and load. Do not infer the absolute maximum supply voltage from the 6 V family rating; use the datasheet electrical limits when designing transient protection and power-source headroom.

Confirm the exact shutdown polarity, enable thresholds, and permitted supply states before using the shutdown function in a power-sequencing scheme. A shutdown command does not guarantee that every output will reach a defined state in every circuit. Maintain the required logic levels throughout startup and verify output behavior with the actual feedback network, especially when the amplifier drives a load that can back-power the output during shutdown.

Check the selected closed-loop gain against the 220 kHz gain-bandwidth product and use the manufacturer's stability guidance when operating near unity gain or driving capacitive loads. For sensor inputs, compare the sensor impedance with the amplifier's input-bias-current requirement and add filtering only where its added noise and phase impact remain acceptable. Simulate the complete signal path rather than evaluating each amplifier channel in isolation.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The manufacturer product page identifies the TLV2455 family and ordering information, but the verified excerpts do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Veri doğrulanma tarihi: 2026-11-10 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

TLV2455IN datasheet TLV2455IN pinout TLV2455IN datasheet pdf TLV2455IN specifications TLV2455IN 16-PDIP TLV2455IN equivalent TLV2455IN replacement TLV2455IN vs TLV2455CN TLV2455IN price TLV2455IN stock Texas Instruments TLV2455IN TLV2455IN sensor signal conditioning

İlgili Bileşenler ve Terimler

Texas Instruments TLV2455IN TLV2455CN TLV2455 operational amplifier voltage-feedback amplifier quad amplifier four-channel amplifier rail-to-rail input rail-to-rail output RRIO low quiescent current 23 µA 220 kHz gain-bandwidth product shutdown function input offset voltage 16-pin DIP 16-PDIP through-hole package active filter sensor signal conditioning battery-powered instrumentation RoHS REACH
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle