TMS320C31PQL60 - 60MHz Floating-Point DSP | Texas Instruments
MPN: TMS320C31PQL60 ✓ AktifTMS320C31PQL60 Genel Bakış
A digital signal processor is a specialized microprocessor architecture optimized for real-time arithmetic. Unlike a general-purpose central processing unit, the TMS320C31 family is designed around a pipelined floating-point execution model and dedicated on-chip peripherals. This makes it suitable for communications, industrial control, instrumentation, audio, and embedded signal-processing systems that require deterministic numerical operations. The 32-bit processor and floating-point capability help simplify algorithms that would otherwise require extensive fixed-point scaling and compensation.
The principal performance figures identify the device as a 60 MFLOPS floating-point processor with a maximum clock frequency of 60 MHz. At 60 MHz, its 33 ns instruction cycle supports the stated throughput of 330 MOPS, 60 MFLOPS, and 30 MIPS. The processor also exposes a 24-bit address bus and uses a nominal 5 V supply. A maximum supply current of 475 mA is listed for the device, making power-supply sizing and thermal planning important in compact embedded systems.
The TMS320C31 architecture belongs to the broad digital signal processor hierarchy and combines a floating-point CPU with dedicated peripherals for real-time embedded control. Its computation throughput is primarily useful in filtering, transforms, waveform analysis, control loops, and communications signal chains. External memory and bus behavior remain central to system-level performance, so designers should account for access timing, wait states, and address decoding when planning the board.
Typical applications include digital communications equipment, industrial measurement and control, audio and speech processing, instrumentation, and embedded DSP modules. In each case, the device can execute iterative numerical algorithms while external interfaces handle data movement. The 132-pin BQFP package exposes a substantial set of processor and peripheral signals, but its relatively large footprint requires careful routing and sufficient PCB area for a dependable escape from the device.
For a new design, begin with the manufacturer's pin-description table, the recommended decoupling network, and the clock and memory-interface requirements. Treat the 5 V nominal supply and 475 mA maximum current as the starting point for power architecture, while checking operating limits and external component requirements against the manufacturer datasheet. This page combines the key orderable-device parameters, sourcing guidance, engineering considerations, and verified drop-in replacement findings for faster component evaluation.
This page synthesizes distributor availability, exact-MPN sourcing information, package characteristics, and practical design notes to complement the manufacturer datasheet. It also distinguishes verified pin-compatible alternatives from merely similar processors, preventing a redesign candidate from being mistaken for a drop-in replacement.
Drop-in alternatifler için TMS320C31PQL60 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller TMS320C31PQL60 (aynı form faktörü ve ayağa oturma) — farklı olan Package Type.
TMS320C31PQL40
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →TMS320C31PQP60
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
TMS320C31PQP40
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
TMS320C31PQL60 Özellikler
| Device Type | 32-bit floating-point digital signal processor |
| Azami Saat Hızı | 60 MHz |
| Processor Width | 32 bit |
| Instruction Cycle Time at 60 MHz | 33 ns |
| Maximum Operations at 60 MHz | 330 MOPS |
| Floating-Point Performance at 60 MHz | 60 MFLOPS |
| Instruction Throughput at 60 MHz | 30 MIPS |
| Address Bus Width | 24 bit |
| Nominal Supply Voltage | 5 V |
| Maximum Supply Current | 475 mA |
| Package Type | 132-pin bumpered BQFP |
| Package Body Size | 24.13 mm x 24.13 mm |
| Montaj Türü | Surface mount |
| Data Sheet Page Count | 48 pages |
| Datasheet File Size | 636 KB |
TMS320C31PQL60 24.13 mm x 24.13 mm Pin Yapısı Kılavuzu
TMS320C31PQL60 (24.13 mm x 24.13 mm paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: TMS320C31PQL60.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
TMS320C31PQL60 için uygundur 6 uygulamas: Digital Communications Signal Processing, Industrial Measurement and Control, Audio and Speech Processing, Test and Measurement Instrumentation, Industrial Motor and Drive Control, Embedded DSP Control Modules.
Digital Communications Signal Processing
The TMS320C31PQL60 fits communications signal chains requiring real-time floating-point arithmetic without the scaling overhead of a fixed-point implementation. Its 60 MHz clock and 60 MFLOPS rating support filters, modulation algorithms, spectral processing, and waveform reconstruction when configured with suitable external memory and interfaces. The 24-bit address bus provides a substantial address range for program, data, and communication buffers. Designers should preserve the 5 V supply architecture, budget for the listed 475 mA maximum supply current, and verify memory timing and peripheral connectivity against the manufacturer datasheet before layout release.
Industrial Measurement and Control
The TMS320C31PQL60 is appropriate for measurement and control systems that combine sampling, conditioning, filtering, and closed-loop computation. Its floating-point execution at 60 MFLOPS allows engineers to implement control loops, adaptive filters, and signal analysis without extensive fixed-point scaling routines. External memory supports acquisition buffers, while the processor's dedicated digital signal processor architecture helps maintain predictable arithmetic throughput. Product implementations should validate sensor timing, isolation boundaries, watchdog behavior, and thermal performance, particularly where the 5 V nominal supply must remain within the manufacturer's operating limits.
Audio and Speech Processing
Audio and speech systems can use the TMS320C31PQL60 for real-time filtering, spectral analysis, echo processing, or speech feature extraction. The 32-bit floating-point architecture is useful when signal amplitudes span wide ranges and precise scaling would otherwise complicate the implementation. At 60 MHz, the processor provides 60 MFLOPS for iterative algorithms, while the 24-bit address bus can accommodate working buffers and program storage. Design work should account for the 132-pin footprint, external memory access behavior, codec interface requirements, and the listed 475 mA maximum supply current.
Test and Measurement Instrumentation
The TMS320C31PQL60 suits precision instrumentation that performs filtering, fast Fourier transforms, calibration, curve fitting, or adaptive signal analysis. Its floating-point arithmetic supports algorithms whose numerical range would be inconvenient in fixed-point form, while the 30 MIPS rate provides useful instruction throughput at 60 MHz. A practical implementation should define memory bandwidth requirements around the acquisition and display pipeline, isolate sensitive analog sections from processor activity, and use the manufacturer's clock and decoupling guidance. Software timing should be checked against the target sampling rate and measurement latency.
Industrial Motor and Drive Control
The TMS320C31PQL60 can serve as the numerical controller in sophisticated motor-control and drive systems, particularly where filters, observers, or transformation algorithms complement a real-time control loop. Its 60 MHz operating rate and 32-bit floating-point capability simplify implementation of algorithms that process measured current and voltage. The processor should be paired with suitable external memory and power-conversion circuitry rather than driving power stages directly. Engineers must verify control-loop timing, isolation requirements, grounding strategy, and worst-case processor current in the final system architecture.
Embedded DSP Control Modules
The TMS320C31PQL60 is well suited to legacy embedded DSP modules in which software, board layout, and processor peripherals are already standardized around the TMS320C31 family. Its 60 MHz performance, 24-bit address bus, and 132-pin bumpered BQFP package support established control, filtering, and communications architectures. When modernizing such equipment, retain the original package footprint only after checking every pin assignment and power rail, and use the manufacturer datasheet for timing, reset, clock, and peripheral details. Firmware migration should preserve boot, memory-map, and interrupt assumptions.
Mühendislik referans verileri: TMS320C31PQL60 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Brand | Texas Instruments |
| Package | 132-pin bumpered BQFP |
| Device Type | 32-bit floating-point digital signal processor |
| Maximum Clock Frequency | 60 MHz |
| Processor Architecture | Floating-point DSP architecture |
| Instruction Cycle Time | 33 ns at 60 MHz |
| Maximum Operations | 330 MOPS at 60 MHz |
| Floating-Point Performance | 60 MFLOPS at 60 MHz |
| Instruction Throughput | 30 MIPS at 60 MHz |
| Address Bus Width | 24 bit |
| Nominal Supply Voltage | 5 V |
| Maximum Supply Current | 475 mA |
| Package Body Size | 24.13 mm x 24.13 mm |
Ana Farklılayıcılar
- Dedicated floating-point signal-processing architecture (karşılaştırma:TMS320F28335PTPQ)
- Established 60 MHz performance point (karşılaştırma:TMS320F28335PTPQ)
- Broad 24-bit address capability (karşılaştırma:TMS320F28335PTPQ)
Tasarım Notları
Design the 5 V supply path around the listed 475 mA maximum supply current rather than the average operating draw. Place the manufacturer's recommended bypass capacitors directly beside the device's supply and ground pins, minimize loop area, and separate high-current switching paths from sensitive processor traces. Confirm the complete voltage range, permitted tolerance, startup behavior, and power-sequencing requirements in the manufacturer datasheet before selecting regulators or bulk capacitance.
Use the 132-pin bumpered BQFP land pattern from the package drawing and follow the manufacturer escape recommendations. A 24.13 mm by 24.13 mm body requires adequate routing space around the device, especially for its address bus and external memory connections. Preserve component clearance for inspection and rework, and avoid placing tall parts directly beneath the package where they could interfere with the lead profile or assembly tooling.
Keep clock, reset, and critical control routing short and away from noisy switching nodes. When the processor interfaces with external memory, match trace topology across the address, data, and control buses and follow the datasheet's timing requirements. Provide a defined grounding strategy for analog and digital sections, and keep high-current return paths from crossing beneath the DSP footprint to reduce coupling into sensitive signal paths.
Do not treat the TMS320F28335PTPQ as a drop-in substitute merely because both devices are listed at 60 MHz in BQFP-132 packages. The TMS320C31PQL60 uses a floating-point DSP architecture, while the comparison listing identifies the TMS320F28335PTPQ as a C28x RISC digital signal controller with 512 KB of flash. A legitimate substitution requires complete pin, clock, memory, electrical, boot, and firmware validation.
Uyumluluk Bilgisi
Compliance declarations and automotive qualification records are not established by the product listings. Obtain current manufacturer or authorized-distribution documentation for the exact ordering code before a regulated production release.