TMS320C82GGP50 - 50MHz Floating-Point DSP | Texas Instruments
MPN: TMS320C82GGP50 ✗ Son Kullanım ZamanıTMS320C82GGP50 Genel Bakış
A digital signal processor is a specialized semiconductor that executes mathematical operations on sampled or streamed data in real time. Within the broader semiconductor hierarchy, a DSP belongs to the processor and digital logic IC category, while the MIMD designation identifies an architecture capable of processing multiple instruction streams. Compared with a general-purpose microprocessor, a DSP typically emphasizes sustained arithmetic throughput, organized memory access, and deterministic real-time signal processing.
The TMS320C82GGP50 combines floating-point arithmetic with a 50 MHz clock and a 64-bit external data bus. Its floating-point processing supports algorithms requiring a broad numerical range, while the external bus width provides substantial transfer bandwidth for data-intensive workloads. The listed maximum supply current of 2,100 mA is an important consideration for power-supply and thermal design because the actual demand depends on operating conditions and processor activity.
This processor is identified as part of the TMS320C8x family and uses a 352-terminal HBGA package with balls distributed across the package underside. The 352-BGA construction supports dense connection of the processor, memory, and external interfaces while keeping the component compact for a high-pin-count digital IC. Its 0°C to 85°C temperature grade and RoHS3-compliant listing identify its principal environmental and compliance characteristics.
Typical applications include real-time signal processing, communications signal handling, audio and control processing, industrial data acquisition, and embedded DSP workloads. The 50 MHz clock is relevant to algorithm timing, while the 64-bit external data bus can benefit applications that exchange large sample blocks with external memory. The 4,096-word RAM supports on-chip working data, while external memory remains important for larger programs and buffers.
PCB design requires careful treatment of the 3.30 V rails, high potential supply current, and dense BGA escape routing. Use the manufacturer pin-assignment and power-supply guidance when assigning the 352 balls, and confirm via decoupling placement and return-path planning that the processor receives a low-impedance supply under worst-case activity. The 35 mm package also demands thermal analysis appropriate to the board construction and enclosure.
This product page consolidates the verified processor identity, clock, architecture, memory-interface, package, supply, and compliance details with practical sourcing and design guidance. It also distinguishes documented drop-in replacements from generic functional substitutes, helping engineers make package- and pin-compatibility decisions without treating similarly specified processors as PCB-compatible parts.
Drop-in alternatifler için TMS320C82GGP50 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinTMS320C82GGP50 Özellikler
| Product Type | Floating-point digital signal processor |
| Architecture | MIMD |
| Processor Series | TMS320C8x |
| Azami Saat Hızı | 50 MHz |
| Instruction Throughput | 50 MIPS |
| Processor Word Width | 32-bit |
| External Data Bus Width | 64-bit |
| RAM Words | 4,096 words |
| Core Supply Voltage | 3.30 V |
| I/O Supply Voltage | 3.30 V |
| Maximum Supply Current | 2,100 mA |
| Paket | 352-BGA (35 mm × 35 mm) |
| Package Type | HBGA |
| Terminal Count | 352 balls |
| Operating Temperature Grade | 0°C to 85°C |
| Montaj Türü | Surface mount |
| RoHS Durumu | RoHS3 compliant |
TMS320C82GGP50 hbga Pin Yapısı Kılavuzu
TMS320C82GGP50 (hbga paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: TMS320C82GGP50.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
TMS320C82GGP50 için uygundur 6 uygulamas: Real-Time Audio Signal Processing, Communications Signal Handling, Industrial Data Acquisition, Motor Control and Feedback Processing, Test and Measurement Signal Processing, Medical and Diagnostic Signal Processing.
Real-Time Audio Signal Processing
The TMS320C82GGP50 is appropriate for real-time audio workloads that benefit from dedicated floating-point execution. Its 50 MHz clock and 50 MIPS throughput provide a defined processing budget for filtering, mixing, modulation, and other sample-based algorithms, while the 64-bit external data bus can support sustained movement of audio blocks between external memory and the processor. The 3.30 V core and I/O rails simplify system-level voltage planning, but the listed 2,100 mA maximum supply current requires careful regulator sizing and low-impedance PCB power distribution. Software developers should benchmark the complete algorithm and memory-access pattern against the real-time deadline.
Communications Signal Handling
The TMS320C82GGP50 can support communications signal handling when an algorithm requires deterministic floating-point computation and frequent movement of sample data. Its MIMD architecture and 50 MIPS throughput are relevant to filtering, modulation, spectral analysis, and adaptive processing, while 4,096 RAM words can hold working data close to the processor. The 64-bit external bus provides a high-bandwidth interface to external memory for larger buffers and program storage. Design validation should confirm bus timing, memory latency, clocking, and throughput under the intended traffic because nominal clock rate alone does not establish end-to-end channel performance.
Industrial Data Acquisition
The TMS320C82GGP50 fits industrial acquisition systems that must condition and process sensor data in real time. Its 50 MHz floating-point DSP capability supports numerical filtering, calibration, feature extraction, and control calculations, while the 64-bit external data bus can facilitate transfer of high-rate sample blocks. The 0°C to 85°C specified temperature range covers typical industrial environments, although enclosure temperature and PCB self-heating must be considered near the upper limit. Power delivery is a major design constraint because maximum supply current is listed as 2,100 mA, requiring regulator headroom, effective decoupling, and careful return-path implementation.
Motor Control and Feedback Processing
The TMS320C82GGP50 can be used for embedded motor-control and feedback algorithms that require repeatable computation of current, velocity, or position signals. Floating-point arithmetic and 50 MIPS throughput provide capacity for filtering, transformation, and control-law calculations, and the 64-bit external bus can connect the processor to memory containing control data and code. The design should establish a deterministic acquisition-to-update cycle and validate latency using the target external-memory characteristics. Thermal and power analysis must account for the 2,100 mA maximum supply current and the heat associated with sustained processor activity.
Test and Measurement Signal Processing
The TMS320C82GGP50 is applicable to test and measurement instruments that perform real-time analysis of captured waveforms. Its dedicated floating-point DSP architecture can execute filtering, convolution, modulation, and correction algorithms at up to 50 MIPS, while the external data bus supports transfer of high-volume sample buffers. The 352-ball HBGA package provides the dense connectivity expected in a sophisticated processing system, but it also requires multilayer routing and careful thermal design. Firmware validation should include worst-case data rates, memory wait states, interrupt latency, and output timing to preserve deterministic measurement performance.
Medical and Diagnostic Signal Processing
The TMS320C82GGP50 can support specialized biomedical signal-processing modules when deterministic numerical computation is required. Floating-point processing is useful for filtering, feature analysis, waveform correlation, and control calculations, while the 64-bit external data bus can accommodate high-rate acquisition buffers. The specified 0°C to 85°C range does not by itself establish suitability for a completed medical system, which may require additional environmental, safety, and regulatory validation. Designers should also separate sensitive analog pathways from the processor's digital supply distribution and verify timing behavior across the full input and output range.
Mühendislik referans verileri: TMS320C82GGP50 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Brand | Texas Instruments |
| Package | 352-BGA (35 mm × 35 mm) |
| Processor Type | Floating-point digital signal processor |
| Architecture | MIMD |
| Maximum Clock Frequency | 50 MHz |
| Instruction Throughput | 50 MIPS |
| Processor Word Width | 32-bit |
| External Data Bus Width | 64-bit |
| RAM Capacity | 4,096 RAM words |
| Core Supply Voltage | 3.30 V |
| I/O Supply Voltage | 3.30 V |
| Maximum Supply Current | 2,100 mA |
| Operating Temperature Grade | 0°C to 85°C |
| RoHS Status | RoHS3 compliant |
Tasarım Notları
Design the 3.30 V core and I/O rails for the documented 2,100 mA maximum supply current rather than assuming a lower continuous load. Use separate local decoupling paths at the relevant HBGA power balls, minimize plane splits and series impedance, and verify the supply with transient testing under processor-intensive code. This is particularly important when external memory and I/O peripherals share the same power distribution system.
Use the manufacturer's 35 mm × 35 mm HBGA footprint and ball map without substituting a generic BGA-352 land pattern. Escape the dense power, ground, memory, and clock nets with a multilayer PCB, preserve continuous ground references beneath the device, and follow the manufacturer recommendations for via arrays and layer transitions. A dedicated symmetry or length-matching strategy may be needed for high-speed external-memory signals.
Evaluate thermal performance for the 0°C to 85°C environmental range while allowing for local PCB self-heating at the maximum listed 2,100 mA supply current. The HBGA's underside heat path depends strongly on the board stack-up, via pattern, copper area, and enclosure airflow. Confirm junction-temperature margin under worst-case sustained processing rather than relying only on ambient temperature or a generic package-power estimate.
Do not treat another 50 MHz DSP as a drop-in replacement merely because its headline clock rate matches. A valid replacement must reproduce the 352-ball pinout, electrical characteristics, external-memory interface, clocking, peripheral connections, and software behavior. Treat similarly specified processors as redesign candidates until footprint, schematic, timing, and software migration have all been validated.
Uyumluluk Bilgisi
The device is listed as RoHS3 compliant. No separate REACH, halogen-free, conflict-minerals, or automotive qualification statement is established by the available product information.