Texas Instruments

TMS320C82GGP50 - 50MHz Floating-Point DSP | Texas Instruments

部品番号: TMS320C82GGP50 ✗ 生産終了
3.30 V Vdss 2,100 mA Id 4,096 words Rds(on) 352-BGA (35 mm × 35 mm) Package 50 MHz Speed
MOQ: 1 |

TMS320C82GGP50 概要

The Texas Instruments TMS320C82GGP50 is a 50 MHz floating-point digital signal processor with a 32-bit architecture, 64-bit external data bus, and 4,096 RAM words, housed in a 35 mm × 35 mm 352-ball BGA package. The device operates with 3.30 V core and I/O supplies, supports up to 50 MIPS, and is classified as a MIMD digital signal processor in the TMS320C8x series.

A digital signal processor is a specialized semiconductor that executes mathematical operations on sampled or streamed data in real time. Within the broader semiconductor hierarchy, a DSP belongs to the processor and digital logic IC category, while the MIMD designation identifies an architecture capable of processing multiple instruction streams. Compared with a general-purpose microprocessor, a DSP typically emphasizes sustained arithmetic throughput, organized memory access, and deterministic real-time signal processing.

The TMS320C82GGP50 combines floating-point arithmetic with a 50 MHz clock and a 64-bit external data bus. Its floating-point processing supports algorithms requiring a broad numerical range, while the external bus width provides substantial transfer bandwidth for data-intensive workloads. The listed maximum supply current of 2,100 mA is an important consideration for power-supply and thermal design because the actual demand depends on operating conditions and processor activity.

This processor is identified as part of the TMS320C8x family and uses a 352-terminal HBGA package with balls distributed across the package underside. The 352-BGA construction supports dense connection of the processor, memory, and external interfaces while keeping the component compact for a high-pin-count digital IC. Its 0°C to 85°C temperature grade and RoHS3-compliant listing identify its principal environmental and compliance characteristics.

Typical applications include real-time signal processing, communications signal handling, audio and control processing, industrial data acquisition, and embedded DSP workloads. The 50 MHz clock is relevant to algorithm timing, while the 64-bit external data bus can benefit applications that exchange large sample blocks with external memory. The 4,096-word RAM supports on-chip working data, while external memory remains important for larger programs and buffers.

PCB design requires careful treatment of the 3.30 V rails, high potential supply current, and dense BGA escape routing. Use the manufacturer pin-assignment and power-supply guidance when assigning the 352 balls, and confirm via decoupling placement and return-path planning that the processor receives a low-impedance supply under worst-case activity. The 35 mm package also demands thermal analysis appropriate to the board construction and enclosure.

This product page consolidates the verified processor identity, clock, architecture, memory-interface, package, supply, and compliance details with practical sourcing and design guidance. It also distinguishes documented drop-in replacements from generic functional substitutes, helping engineers make package- and pin-compatibility decisions without treating similarly specified processors as PCB-compatible parts.

ドロップイン代替品: TMS320C82GGP50 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

TMS320C82GGP50 仕様

Product Type Floating-point digital signal processor
Architecture MIMD
Processor Series TMS320C8x
最大クロック周波数 50 MHz
Instruction Throughput 50 MIPS
Processor Word Width 32-bit
External Data Bus Width 64-bit
RAM Words 4,096 words
Core Supply Voltage 3.30 V
I/O Supply Voltage 3.30 V
Maximum Supply Current 2,100 mA
パッケージ 352-BGA (35 mm × 35 mm)
Package Type HBGA
Terminal Count 352 balls
Operating Temperature Grade 0°C to 85°C
実装タイプ Surface mount
RoHS ステータス RoHS3 compliant

TMS320C82GGP50 hbga ピン配置ガイド

TMS320C82GGP50 (hbga パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

TMS320C82GGP50 の hbga パッケージピン配置図

詳細なピン配置データはありません: TMS320C82GGP50.

詳細は データシート をご参照ください。

主な用途

TMS320C82GGP50 の用途: 6 件s: Real-Time Audio Signal Processing, Communications Signal Handling, Industrial Data Acquisition, Motor Control and Feedback Processing, Test and Measurement Signal Processing, Medical and Diagnostic Signal Processing.

🎧

Real-Time Audio Signal Processing

The TMS320C82GGP50 is appropriate for real-time audio workloads that benefit from dedicated floating-point execution. Its 50 MHz clock and 50 MIPS throughput provide a defined processing budget for filtering, mixing, modulation, and other sample-based algorithms, while the 64-bit external data bus can support sustained movement of audio blocks between external memory and the processor. The 3.30 V core and I/O rails simplify system-level voltage planning, but the listed 2,100 mA maximum supply current requires careful regulator sizing and low-impedance PCB power distribution. Software developers should benchmark the complete algorithm and memory-access pattern against the real-time deadline.

🌐

Communications Signal Handling

The TMS320C82GGP50 can support communications signal handling when an algorithm requires deterministic floating-point computation and frequent movement of sample data. Its MIMD architecture and 50 MIPS throughput are relevant to filtering, modulation, spectral analysis, and adaptive processing, while 4,096 RAM words can hold working data close to the processor. The 64-bit external bus provides a high-bandwidth interface to external memory for larger buffers and program storage. Design validation should confirm bus timing, memory latency, clocking, and throughput under the intended traffic because nominal clock rate alone does not establish end-to-end channel performance.

🏭

Industrial Data Acquisition

The TMS320C82GGP50 fits industrial acquisition systems that must condition and process sensor data in real time. Its 50 MHz floating-point DSP capability supports numerical filtering, calibration, feature extraction, and control calculations, while the 64-bit external data bus can facilitate transfer of high-rate sample blocks. The 0°C to 85°C specified temperature range covers typical industrial environments, although enclosure temperature and PCB self-heating must be considered near the upper limit. Power delivery is a major design constraint because maximum supply current is listed as 2,100 mA, requiring regulator headroom, effective decoupling, and careful return-path implementation.

🤖

Motor Control and Feedback Processing

The TMS320C82GGP50 can be used for embedded motor-control and feedback algorithms that require repeatable computation of current, velocity, or position signals. Floating-point arithmetic and 50 MIPS throughput provide capacity for filtering, transformation, and control-law calculations, and the 64-bit external bus can connect the processor to memory containing control data and code. The design should establish a deterministic acquisition-to-update cycle and validate latency using the target external-memory characteristics. Thermal and power analysis must account for the 2,100 mA maximum supply current and the heat associated with sustained processor activity.

📺

Test and Measurement Signal Processing

The TMS320C82GGP50 is applicable to test and measurement instruments that perform real-time analysis of captured waveforms. Its dedicated floating-point DSP architecture can execute filtering, convolution, modulation, and correction algorithms at up to 50 MIPS, while the external data bus supports transfer of high-volume sample buffers. The 352-ball HBGA package provides the dense connectivity expected in a sophisticated processing system, but it also requires multilayer routing and careful thermal design. Firmware validation should include worst-case data rates, memory wait states, interrupt latency, and output timing to preserve deterministic measurement performance.

💊

Medical and Diagnostic Signal Processing

The TMS320C82GGP50 can support specialized biomedical signal-processing modules when deterministic numerical computation is required. Floating-point processing is useful for filtering, feature analysis, waveform correlation, and control calculations, while the 64-bit external data bus can accommodate high-rate acquisition buffers. The specified 0°C to 85°C range does not by itself establish suitability for a completed medical system, which may require additional environmental, safety, and regulatory validation. Designers should also separate sensitive analog pathways from the processor's digital supply distribution and verify timing behavior across the full input and output range.

What is the TMS320C82GGP50?
The TMS320C82GGP50 is a Texas Instruments 32-bit floating-point MIMD digital signal processor operating at up to 50 MHz. According to the manufacturer datasheet, the device combines a 64-bit external data bus, 4,096 RAM words, 3.30 V core and I/O supplies, and up to 50 MIPS in a 352-ball HBGA package measuring 35 mm × 35 mm. It is intended for computationally intensive, real-time signal-processing systems.
What are the key specifications of TMS320C82GGP50 that engineers should know?
The key specifications are a 50 MHz maximum clock, 50 MIPS throughput, 32-bit floating-point processor architecture, 64-bit external data bus, and 4,096 RAM words. The manufacturer datasheet also identifies 3.30 V core and I/O operation and a 352-ball, 35 mm × 35 mm HBGA package. Maximum supply current is listed as 2,100 mA, making power delivery and board-level thermal design central to implementation.
What is the operating voltage of TMS320C82GGP50?
The TMS320C82GGP50 operates with a 3.30 V core supply and a 3.30 V I/O supply. According to the manufacturer datasheet and product listings, no alternative core or I/O voltage is identified for this orderable MPN. Because the listed maximum supply current reaches 2,100 mA, the supply design should include suitable current capacity, low-impedance decoupling, and layout that minimizes voltage droop during high processor activity.
How much memory does TMS320C82GGP50 have?
The TMS320C82GGP50 has 4,096 RAM words, as listed in the manufacturer datasheet. The processor also provides a 64-bit external data bus for communication with external memory and other system components. Internal RAM should therefore be evaluated as working storage rather than as the sole location for large code images or extensive sample buffers, and the external memory requirements must be selected from the device's documented interface characteristics.
What package does TMS320C82GGP50 use?
The TMS320C82GGP50 uses a 352-ball HBGA package measuring 35 mm × 35 mm. According to the manufacturer datasheet, the package contains 352 terminals distributed across the underside of the processor. Its pin count and ball layout make the component a high-density surface-mount design requiring controlled fanout, multilayer PCB construction, and placement based on the manufacturer footprint and ball-assignment diagrams.
Where to download the TMS320C82GGP50 datasheet PDF?
The TMS320C82GGP50 datasheet documentation can be accessed through the linked datasheet PDF page, which points to the Texas Instruments device documentation. The manufacturer datasheet is the authoritative source for the complete 352-ball pinout, electrical characteristics, memory interface, timing requirements, and power sequencing. Engineers should use its pin-description table and layout guidance rather than infer connections from general BGA conventions.
Where can I find the TMS320C82GGP50 pinout?
The TMS320C82GGP50 pinout is documented in the manufacturer's 352-ball pin-assignment table and package drawing. The device uses a 35 mm × 35 mm HBGA package with 352 terminals, so its layout is too dense to reproduce reliably from a distributor summary. Use the manufacturer datasheet when assigning every power, ground, memory, clock, and control connection, and cross-check the selected PCB footprint against the stated package dimensions.
How much current does TMS320C82GGP50 require?
The maximum supply current listed for the TMS320C82GGP50 is 2,100 mA. According to the manufacturer datasheet, this is a maximum rating rather than a guaranteed continuous operating current. Board design should use the actual processor activity, supply tolerances, transient response, and power-management requirements to determine regulator capacity and thermal performance. Decoupling and plane connectivity must preserve a low-impedance path at the device power balls.
What is the operating temperature range of TMS320C82GGP50?
The TMS320C82GGP50 is specified in the 0°C to 85°C temperature range. According to the manufacturer product information, this part is categorized as an industrial-temperature-grade digital signal processor. Designers operating near the upper limit should account for PCB self-heating and the processor's possible 2,100 mA maximum supply current, because enclosure temperature and local junction heating can reduce available operating margin.
Is TMS320C82GGP50 suitable for real-time signal processing?
The TMS320C82GGP50 is suitable for real-time DSP workloads that benefit from a dedicated processor and a predictable arithmetic architecture. Its 50 MHz clock, 50 MIPS throughput, floating-point capability, and 64-bit external data bus support demanding numerical operations and high-bandwidth sample movement. Algorithm suitability still depends on cycle requirements, memory latency, data-transfer rate, and whether the external bus bandwidth meets the workload's real-time deadline.
What can replace TMS320C82GGP50?
No verified pin-to-pin drop-in replacement for the TMS320C82GGP50 is identified. A replacement must match the 352-ball HBGA footprint, ball functions, electrical limits, memory interface, clocking, and software environment, not merely the 50 MHz clock rating. Use the Texas Instruments cross-reference search with the complete orderable MPN and require schematic, footprint, and firmware validation before treating any candidate as a drop-in part.
Is there a cross-brand equivalent for TMS320C82GGP50?
No cross-brand equivalent with verified pin compatibility is established for the TMS320C82GGP50. A processor with similar arithmetic performance is not automatically interchangeable because the target uses a specialized 352-ball HBGA interface and a specific memory and peripheral architecture. Request current sourcing and technical review through the Request a Quote form on this page, and require the manufacturer to confirm footprint, pinout, electrical compatibility, and migration requirements.
When should I choose TMS320C82GGP50 instead of a general-purpose processor?
Choose the TMS320C82GGP50 when a design needs a dedicated floating-point DSP architecture, sustained real-time processing, and a 64-bit external data bus rather than general-purpose computing. Its 50 MHz clock and 50 MIPS throughput can simplify deterministic control or signal-processing designs, while 4,096 RAM words provide on-chip working memory. A general-purpose processor may be preferable when software ecosystem, peripheral integration, or display and networking support matters more than deterministic DSP execution.
TMS320C82GGP50 vs. a general-purpose microprocessor — which is better for signal processing?
The TMS320C82GGP50 is generally the better architecture for deterministic numerical signal processing because it is a dedicated floating-point DSP with a 50 MHz clock, 50 MIPS throughput, and 64-bit external data bus. A general-purpose processor offers a broader software ecosystem but may require more software tuning to meet the same real-time deadline. The correct choice ultimately depends on workload latency, memory traffic, peripheral needs, power budget, and software ecosystem.
Where to buy TMS320C82GGP50 online?
Use the Request a Quote form on this page to request TMS320C82GGP50 availability, lead time, and order handling from XAIPART. The device is identified as a Texas Instruments 352-ball HBGA DSP in the 0°C to 85°C temperature range. For production planning, include your required quantity, reel or tray packaging preference, target delivery date, and inspection requirements in the request.
What is the price of TMS320C82GGP50?
Current TMS320C82GGP50 pricing depends on quantity, package handling, and sourcing conditions and is not reproduced as a static figure on this page. Submit a request through the Request a Quote form with your required quantity and delivery schedule. The form is the appropriate route for current unit pricing, volume breaks, stock confirmation, and lead-time confirmation without relying on an outdated listing price.
What is the lead time for TMS320C82GGP50 and is it in stock?
Current lead time and stock status for TMS320C82GGP50 should be confirmed through the Request a Quote form on this page. One distributor search result showed inventory, but such status can change and does not establish XAIPART's current allocation. Include the required quantity, target date, packaging preference, and production schedule so the sourcing response can reflect the actual supply position.

エンジニアリング参考データ: TMS320C82GGP50 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the TMS320C82GGP50 when the design requires a dedicated floating-point DSP with a defined 50 MHz clock, up to 50 MIPS throughput, a 64-bit external data bus, and a 4,096-word internal RAM. It is particularly relevant to real-time communications, audio, industrial acquisition, control, and test systems where deterministic signal processing matters more than a broad general-purpose software ecosystem. The 3.30 V core and I/O rails simplify voltage integration, but the 2,100 mA maximum supply current and dense 352-ball HBGA require careful power delivery, multilayer routing, and thermal validation. No verified drop-in alternative is established, so any proposed substitution should be treated as a redesign until the manufacturer confirms footprint, ball functions, timing, electrical limits, memory behavior, and software compatibility. Request current availability and lead time through the Request a Quote form before committing a production schedule.

代替品との比較

パラメータ この製品
Brand Texas Instruments
Package 352-BGA (35 mm × 35 mm)
Processor Type Floating-point digital signal processor
Architecture MIMD
Maximum Clock Frequency 50 MHz
Instruction Throughput 50 MIPS
Processor Word Width 32-bit
External Data Bus Width 64-bit
RAM Capacity 4,096 RAM words
Core Supply Voltage 3.30 V
I/O Supply Voltage 3.30 V
Maximum Supply Current 2,100 mA
Operating Temperature Grade 0°C to 85°C
RoHS Status RoHS3 compliant

設計ノート

Design the 3.30 V core and I/O rails for the documented 2,100 mA maximum supply current rather than assuming a lower continuous load. Use separate local decoupling paths at the relevant HBGA power balls, minimize plane splits and series impedance, and verify the supply with transient testing under processor-intensive code. This is particularly important when external memory and I/O peripherals share the same power distribution system.

Use the manufacturer's 35 mm × 35 mm HBGA footprint and ball map without substituting a generic BGA-352 land pattern. Escape the dense power, ground, memory, and clock nets with a multilayer PCB, preserve continuous ground references beneath the device, and follow the manufacturer recommendations for via arrays and layer transitions. A dedicated symmetry or length-matching strategy may be needed for high-speed external-memory signals.

Evaluate thermal performance for the 0°C to 85°C environmental range while allowing for local PCB self-heating at the maximum listed 2,100 mA supply current. The HBGA's underside heat path depends strongly on the board stack-up, via pattern, copper area, and enclosure airflow. Confirm junction-temperature margin under worst-case sustained processing rather than relying only on ambient temperature or a generic package-power estimate.

Do not treat another 50 MHz DSP as a drop-in replacement merely because its headline clock rate matches. A valid replacement must reproduce the 352-ball pinout, electrical characteristics, external-memory interface, clocking, peripheral connections, and software behavior. Treat similarly specified processors as redesign candidates until footprint, schematic, timing, and software migration have all been validated.

コンプライアンス情報

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The device is listed as RoHS3 compliant. No separate REACH, halogen-free, conflict-minerals, or automotive qualification statement is established by the available product information.

関連検索

TMS320C82GGP50 TMS320C82GGP50 datasheet TMS320C82GGP50 datasheet pdf TMS320C82GGP50 pinout TMS320C82GGP50 specifications TMS320C82GGP50 50MHz DSP TMS320C82GGP50 352 BGA TMS320C82GGP50 footprint TMS320C82GGP50 equivalent TMS320C82GGP50 replacement Texas Instruments TMS320C82GGP50 TMS320C82GGP50 price TMS320C82GGP50 stock TMS320C82GGP50 application circuit

関連部品&用語

Texas Instruments TMS320C82GGP50 TMS320C8x floating-point digital signal processor DSP MIMD architecture digital signal processor digital processor IC digital logic IC semiconductor 32-bit processor 50 MHz clock 50 MIPS 64-bit external data bus 4,096 RAM words 3.30 V core supply 3.30 V I/O supply 352-ball HBGA BGA package family surface-mount technology RoHS3 RoHS real-time signal processing industrial data acquisition communications signal handling
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示