TPA3122D2N - 15W Stereo Class-D Amplifier | Texas Instruments
MPN: TPA3122D2N ✓ AktifTPA3122D2N Genel Bakış
A Class-D audio power amplifier is an efficient switching amplifier that converts audio input signals into high-current speaker outputs using pulse-width modulation. Within the power-management hierarchy, the TPA3122D2N belongs to the Class-D amplifier family, provides linear audio output power, and sits between analog audio sources and loudspeaker loads. Its high conversion efficiency reduces the heat that must be removed during music playback.
The TPA3122D2 provides four selectable fixed gain settings of 20, 26, 32, and 40 dB. Two gain-select pins allow the amplifier to be configured without external gain-setting resistors, while its internal oscillator removes the need for external switching-frequency components. The amplifier also supports analog input signals and is optimized for conventional stereo speaker loads.
The 20-pin PDIP package provides a practical through-hole format for audio equipment, industrial control products, educational electronics, and custom amplifier boards. Because the amplifier can operate in stereo single-ended or bridged mono configurations, a single board design can address both dual-speaker systems and higher-power single-speaker systems. External input and supply filtering should follow the application circuit in the manufacturer datasheet.
Typical uses include compact stereo audio amplifiers, multimedia speaker systems, portable powered speakers, soundbars, industrial announcement equipment, and educational audio projects. The single-ended output configuration supports conventional stereo speaker wiring, while bridge-tied operation increases the available output power when both amplifier channels drive one load.
PCB design should prioritize short speaker output paths, stable supply bypassing, and thermal management around the PDIP device. The manufacturer states that Class-D efficiency eliminates the need for an external heat sink during music playback, although continuous high-output operation still requires checking junction temperature and copper dissipation. Follow the pin-description table in the manufacturer datasheet when assigning tracks.
This page combines the TPA3122D2N power ratings, package information, application guidance, replacement analysis, and practical design notes in a form that helps engineers evaluate the amplifier before beginning a PCB layout or speaker-enclosure design.
Drop-in alternatifler için TPA3122D2N — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller TPA3122D2N (aynı form faktörü ve ayağa oturma) — farklı olan Gain Control, Minimum Speaker Load, Output Configuration.
TPA3125D2N
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →TPA3122D2N Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | Stereo Class-D audio power amplifier |
| Number of Channels | 2 channels |
| Rated Output Power | 15 W per channel |
| Bridged Mono Output Power | 30 W |
| Supply Voltage Range | 10 V to 26 V |
| Minimum Speaker Load | 4 Ω |
| Çıkış Konfigürasyonu | Single-ended stereo or bridge-tied mono |
| Fixed Gain Settings | 20 dB, 26 dB, 32 dB, and 40 dB |
| Gain Control | 2 selectable gain pins |
| Switching Oscillator | Internal; no external components required |
| Paket | 20-pin PDIP |
| Montaj Türü | Through-hole |
TPA3122D2N 20-pin pdip Pin Yapısı Kılavuzu
TPA3122D2N (20-pin pdip paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: TPA3122D2N.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
TPA3122D2N için uygundur 6 uygulamas: Compact Stereo Speaker Amplifier, Bridged Mono Speaker Power, Powered Multimedia Speaker, Industrial Audio Announcement System, Educational Audio Amplifier, Portable Powered Speaker.
Compact Stereo Speaker Amplifier
The TPA3122D2N fits compact stereo speaker systems that require two independent 15 W output channels from a 10 V to 26 V supply. Its Class-D architecture provides high conversion efficiency, while the single-ended outputs support conventional left and right speaker wiring. Four fixed gain options—20, 26, 32, and 40 dB—allow the system designer to select a useful starting point without changing the PCB when source-level requirements differ.
Önerilen
Bridged Mono Speaker Power
In bridge-tied mono operation, the TPA3122D2N can combine its two output channels to deliver up to 30 W into a bridged load. This configuration is useful for powered subwoofer, single full-range speaker, and compact public-address designs where greater output headroom is required. Because the speaker terminals are then driven differentially, the load wiring and amplifier output network must follow the manufacturer application circuit rather than a conventional single-ended connection.
Önerilen
Powered Multimedia Speaker
The TPA3122D2N is appropriate for a powered multimedia speaker or compact audio appliance that must drive 4 Ω or 8 Ω stereo loads from an internal Class-D power rail. Its 15 W per channel rating provides more headroom than a 10 W-class alternative, while the internal oscillator eliminates external switching-frequency components. The designer should still isolate the analog input path from switching and supply noise, and use adequate copper and thermal spreading around the PDIP footprint.
Önerilen
Industrial Audio Announcement System
A TPA3122D2N-based module can provide efficient stereo output for industrial announcement, intercom, or workstation-audio equipment. Its 10 V to 26 V operating range suits systems with an intermediate DC bus, while selectable fixed gain settings simplify control-interface design. For industrial use, evaluate electromagnetic interference, input filtering, connector grounding, and continuous-load thermal behavior. The through-hole PDIP package also makes the amplifier accessible for inspection and through-hole assembly in higher-volume equipment.
Önerilen
Educational Audio Amplifier
The TPA3122D2N is well suited to educational stereo audio kits because it combines a 15 W per channel Class-D output stage, four selectable gains, and an internal oscillator in a 20-pin PDIP package. The fixed gain choices help students explore audio amplification without calculating external feedback networks. Its 10 V to 26 V supply requirement should be paired with a protected laboratory power source, and speaker connections must follow the manufacturer pinout to avoid damaging the outputs during assembly.
Önerilen
Portable Powered Speaker
The TPA3122D2N can serve as the power stage in a portable or battery-derived powered speaker when the system provides a compliant 10 V to 26 V rail. Class-D efficiency is valuable because it reduces heat dissipation and supports useful battery life, while 15 W per channel provides strong clean-power headroom for small speaker enclosures. Care is needed because voltage regulation, conversion losses, amplifier efficiency, and speaker efficiency combine to determine runtime, so the complete power path must be designed and measured as a system.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: TPA3122D2N — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | TPA3125D2N |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 20-pin PDIP | 20-pin PDIP |
| Rated Stereo Output Power | 15 W per channel | 10 W per channel |
| Amplifier Class | Class D | Class D |
| Number of Channels | 2 channels | 2 channels |
Ana Farklılayıcılar
- Higher rated stereo output power (karşılaştırma:TPA3125D2N)
- Selection of the same-package alternative (karşılaştırma:TPA3125D2N)
- Flexible stereo and mono configurations (karşılaştırma:TPA3125D2N)
Tasarım Notları
Class-D efficiency reduces the heat that must be removed during music playback, but output power, supply voltage, and load impedance still determine thermal stress. Provide copper around the PDIP pads and maintain airflow when both channels operate continuously at maximum rated output. Use the manufacturer power tables and thermal information to verify junction temperature; do not assume that music-playback efficiency guarantees unrestricted continuous-output capability.
Route the Class-D speaker outputs as short and direct as practical, keep the switching output loop compact, and avoid placing sensitive audio inputs beside high-current output traces. Place the required input, supply, and compensation or filtering components at the locations shown in the manufacturer application circuit. The 20-pin PDIP footprint also needs pin-1 orientation and package-clearance checks against the board outline and mounting-hole pattern.
The 10 V to 26 V supply range is central to both output capability and device protection. Decouple the supply at the IC using the capacitance and placement specified by the manufacturer, and keep switching-node current out of the analog input return path. When using bridge-tied mono operation, verify that the speaker load and output network are appropriate because both output pins are active and the load is driven differentially.
Do not assume that identical package names guarantee safe substitution. TPA3122D2N and TPA3125D2N both appear in 20-pin PDIP options, but their documented output ratings differ by 5 W per channel. Before replacing one with the other, compare the complete pin-description tables, gain programming, shutdown behavior, supply limits, output configuration, and rated load. The lower-power device can also change clipping headroom and enclosure thermal requirements.
Uyumluluk Bilgisi
The manufacturer product page and available search results do not provide explicit compliance statements for this ordering code. Confirm RoHS, REACH, lead-free, halogen-free, automotive qualification, and conflict-minerals status using the manufacturer's current product documentation.