Texas Instruments

TPA3122D2N - 15W Stereo Class-D Amplifier | Texas Instruments

MPN: TPA3122D2N ✓ فعال
10 V to 26 V Vdss 20-pin PDIP Package
MOQ: 1 |

TPA3122D2N جائزہ

The Texas Instruments TPA3122D2N is a 15 W per channel, two-channel Class-D audio power amplifier with a 10 V to 26 V supply range and single-ended outputs, housed in a 20-pin PDIP package. It can also operate as a 30 W mono bridge-tied load amplifier and can drive stereo speakers as low as 4 Ω.

A Class-D audio power amplifier is an efficient switching amplifier that converts audio input signals into high-current speaker outputs using pulse-width modulation. Within the power-management hierarchy, the TPA3122D2N belongs to the Class-D amplifier family, provides linear audio output power, and sits between analog audio sources and loudspeaker loads. Its high conversion efficiency reduces the heat that must be removed during music playback.

The TPA3122D2 provides four selectable fixed gain settings of 20, 26, 32, and 40 dB. Two gain-select pins allow the amplifier to be configured without external gain-setting resistors, while its internal oscillator removes the need for external switching-frequency components. The amplifier also supports analog input signals and is optimized for conventional stereo speaker loads.

The 20-pin PDIP package provides a practical through-hole format for audio equipment, industrial control products, educational electronics, and custom amplifier boards. Because the amplifier can operate in stereo single-ended or bridged mono configurations, a single board design can address both dual-speaker systems and higher-power single-speaker systems. External input and supply filtering should follow the application circuit in the manufacturer datasheet.

Typical uses include compact stereo audio amplifiers, multimedia speaker systems, portable powered speakers, soundbars, industrial announcement equipment, and educational audio projects. The single-ended output configuration supports conventional stereo speaker wiring, while bridge-tied operation increases the available output power when both amplifier channels drive one load.

PCB design should prioritize short speaker output paths, stable supply bypassing, and thermal management around the PDIP device. The manufacturer states that Class-D efficiency eliminates the need for an external heat sink during music playback, although continuous high-output operation still requires checking junction temperature and copper dissipation. Follow the pin-description table in the manufacturer datasheet when assigning tracks.

This page combines the TPA3122D2N power ratings, package information, application guidance, replacement analysis, and practical design notes in a form that helps engineers evaluate the amplifier before beginning a PCB layout or speaker-enclosure design.

کے لیے ڈراپ اِن متبادل TPA3122D2N — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں TPA3122D2N (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Gain Control, Minimum Speaker Load, Output Configuration.

Texas Instruments
Gain Control: Externally controlled
Minimum Speaker Load: 4 ohm
Output Configuration: Single-ended stereo outputs
موازنہ کریں TPA3122D2N →

TPA3125D2N

✅ ڈراپ-اِن
Texas Instruments
📦 20-pin PDIP
Class-D audio power amplifier · 1-channel mono or 2-channel stereo · 10 W per channel · 20 W · 10 V to 26 V · 4 ohm · Single-ended stereo outputs · Analog input

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

TPA3122D2N زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type Stereo Class-D audio power amplifier
Number of Channels 2 channels
Rated Output Power 15 W per channel
Bridged Mono Output Power 30 W
Supply Voltage Range 10 V to 26 V
Minimum Speaker Load 4 Ω
آؤٹ پٹ کنفیگریشن Single-ended stereo or bridge-tied mono
Fixed Gain Settings 20 dB, 26 dB, 32 dB, and 40 dB
Gain Control 2 selectable gain pins
Switching Oscillator Internal; no external components required
پیکیج 20-pin PDIP
ماؤنٹنگ ٹائپ Through-hole

TPA3122D2N 20-pin pdip پن کنفیگریشن گائیڈ

TPA3122D2N (20-pin pdip پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

TPA3122D2N کے لیے 20-pin pdip پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں TPA3122D2N.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

TPA3122D2N کے لیے موزوں ہے 6 ایپلیکیشنs: Compact Stereo Speaker Amplifier, Bridged Mono Speaker Power, Powered Multimedia Speaker, Industrial Audio Announcement System, Educational Audio Amplifier, Portable Powered Speaker.

🎧

Compact Stereo Speaker Amplifier

The TPA3122D2N fits compact stereo speaker systems that require two independent 15 W output channels from a 10 V to 26 V supply. Its Class-D architecture provides high conversion efficiency, while the single-ended outputs support conventional left and right speaker wiring. Four fixed gain options—20, 26, 32, and 40 dB—allow the system designer to select a useful starting point without changing the PCB when source-level requirements differ.

🔊

Bridged Mono Speaker Power

In bridge-tied mono operation, the TPA3122D2N can combine its two output channels to deliver up to 30 W into a bridged load. This configuration is useful for powered subwoofer, single full-range speaker, and compact public-address designs where greater output headroom is required. Because the speaker terminals are then driven differentially, the load wiring and amplifier output network must follow the manufacturer application circuit rather than a conventional single-ended connection.

📱

Powered Multimedia Speaker

The TPA3122D2N is appropriate for a powered multimedia speaker or compact audio appliance that must drive 4 Ω or 8 Ω stereo loads from an internal Class-D power rail. Its 15 W per channel rating provides more headroom than a 10 W-class alternative, while the internal oscillator eliminates external switching-frequency components. The designer should still isolate the analog input path from switching and supply noise, and use adequate copper and thermal spreading around the PDIP footprint.

🏭

Industrial Audio Announcement System

A TPA3122D2N-based module can provide efficient stereo output for industrial announcement, intercom, or workstation-audio equipment. Its 10 V to 26 V operating range suits systems with an intermediate DC bus, while selectable fixed gain settings simplify control-interface design. For industrial use, evaluate electromagnetic interference, input filtering, connector grounding, and continuous-load thermal behavior. The through-hole PDIP package also makes the amplifier accessible for inspection and through-hole assembly in higher-volume equipment.

🔧

Educational Audio Amplifier

The TPA3122D2N is well suited to educational stereo audio kits because it combines a 15 W per channel Class-D output stage, four selectable gains, and an internal oscillator in a 20-pin PDIP package. The fixed gain choices help students explore audio amplification without calculating external feedback networks. Its 10 V to 26 V supply requirement should be paired with a protected laboratory power source, and speaker connections must follow the manufacturer pinout to avoid damaging the outputs during assembly.

⚡

Portable Powered Speaker

The TPA3122D2N can serve as the power stage in a portable or battery-derived powered speaker when the system provides a compliant 10 V to 26 V rail. Class-D efficiency is valuable because it reduces heat dissipation and supports useful battery life, while 15 W per channel provides strong clean-power headroom for small speaker enclosures. Care is needed because voltage regulation, conversion losses, amplifier efficiency, and speaker efficiency combine to determine runtime, so the complete power path must be designed and measured as a system.

تجویز کردہ پروڈکٹس کا خلاصہ

TPA3122D2 Same Class-D amplifier family استعمال ہوتا ہے: Compact Stereo Speaker Amplifier, Bridged Mono Speaker Power, Powered Multimedia Speaker, Industrial Audio Announcement System, Educational Audio Amplifier, Portable Powered Speaker TPA3125D2N Texas Instruments استعمال ہوتا ہے: Compact Stereo Speaker Amplifier, Bridged Mono Speaker Power, Powered Multimedia Speaker, Industrial Audio Announcement System, Educational Audio Amplifier, Portable Powered Speaker
What is TPA3122D2N?
The TPA3122D2N is a two-channel, 15 W per channel Class-D audio power amplifier from Texas Instruments. According to the manufacturer product page, it operates from a 10 V to 26 V supply and supports single-ended stereo or bridge-tied mono output. The device is offered in a 20-pin PDIP package and can drive stereo speaker loads down to 4 Ω.
What are the key specifications of TPA3122D2N that engineers should know?
The TPA3122D2N delivers 15 W per channel, supports up to 30 W in bridge-tied mono operation, and operates from 10 V to 26 V. According to the Texas Instruments datasheet, it provides four selectable fixed gain settings of 20, 26, 32, and 40 dB, uses an internal oscillator that requires no external components, and is packaged in a 20-pin PDIP.
What is the output power of TPA3122D2N?
The TPA3122D2N provides 15 W per channel in stereo single-ended operation and can provide 30 W when its two channels are combined in a bridge-tied mono configuration. The Texas Instruments datasheet also identifies operation with 4 Ω stereo speakers. Confirm the exact supply voltage and thermal conditions used for the rated test configuration.
What supply voltage does TPA3122D2N require?
The TPA3122D2N operates from a 10 V to 26 V supply, as stated on the Texas Instruments product page. This range covers common Class-D audio system rails while allowing the amplifier to utilize a substantial portion of the available power at higher supply voltages. The manufacturer datasheet should be used for minimum operating and absolute-maximum conditions.
What is the difference between TPA3122D2N and TPA3125D2N?
The TPA3122D2N is a 15 W per channel Class-D amplifier, while the TPA3125D2N comparison identifies it as a 10 W stereo Class-D amplifier. Both appear in 20-pin PDIP options, but the 5 W per channel output-rating difference is 33%, so confirm the target speaker power, supply voltage, and thermal conditions before treating one as a substitute.
When should I choose TPA3122D2N instead of TPA3125D2N?
Choose the TPA3122D2N when the design requires approximately 15 W per channel rather than the 10 W per channel associated with the TPA3125D2N. The additional 5 W per channel can improve output headroom for demanding 4 Ω or 8 Ω speakers. The TPA3125D2N may be preferable when lower output power, lower system demand, or a confirmed compatible pinout is sufficient.
Is TPA3122D2N suitable for driving 4 ohm speakers?
Yes, the TPA3122D2N is suitable for driving stereo speakers as low as 4 Ω, according to the Texas Instruments manufacturer page. The 15 W per channel rating and 10 V to 26 V operating range make it appropriate for compact powered speakers. Use the datasheet output-power tables to select the supply and load conditions for the required audio level.
Where can I download the TPA3122D2N datasheet PDF?
Download the TPA3122D2N datasheet PDF from the official Texas Instruments document link on this page. The manufacturer document describes the 15 W per channel stereo output, 30 W bridge-tied operation, 10 V to 26 V supply range, four fixed gain choices, internal oscillator, 20-pin PDIP package, and recommended application circuits.
Where can I find the TPA3122D2N pinout?
The TPA3122D2N pinout is shown in the pin-configuration section of the Texas Instruments manufacturer datasheet. Use that table to assign supply, ground, analog input, gain-select, shutdown, and speaker-output connections. The part uses a 20-pin PDIP footprint, so verify the package outline, pin-1 orientation, and keep-out requirements before laying out the board.
What can replace TPA3122D2N?
The TPA3125D2N is the closest documented same-package alternative found for the TPA3122D2N, but it is rated at 10 W per channel rather than 15 W per channel. Because that 33% reduction exceeds the normal drop-in matching threshold, it is not an unqualified replacement. A valid drop-in candidate should match the 20-pin PDIP pinout, supply range, gain interface, and required output power.
Can TPA3125D2N replace TPA3122D2N without a PCB change?
A PCB change is not expected because both parts are identified in 20-pin PDIP options, but a complete functional drop-in requires confirmation of every pin function. The TPA3125D2N provides 10 W per channel versus 15 W for the TPA3122D2N. Verify the exact pinout, supply limits, gain settings, output configuration, and thermal performance in each manufacturer datasheet before substitution.
What is the best cross-brand equivalent for TPA3122D2N?
No cross-brand drop-in equivalent is established by the available component cross-reference information. A defensible equivalent must use the same 20-pin PDIP footprint, preserve pin functions, accept the intended supply voltage, provide comparable Class-D output power, and offer a compatible gain-control interface. Search for candidates by those constraints rather than treating a generic 15 W stereo Class-D amplifier as a guaranteed replacement.
Where can I buy TPA3122D2N online?
Use the Request a Quote form on this page to request TPA3122D2N availability, current lead time, and order quantities from XAIPART. The part is a Texas Instruments 15 W per channel, 20-pin PDIP Class-D audio amplifier. The form is the appropriate route for a current quotation and supply confirmation rather than relying on a static price.
What is the price of TPA3122D2N?
The current TPA3122D2N price depends on order quantity and supply status, so use the Request a Quote form on this page for a current offer. The quoted result should identify the exact 20-pin PDIP ordering code and required quantity. Avoid comparing the generic family price with a different package suffix or operating-temperature variant.
What is the lead time and stock status of TPA3122D2N?
Request current stock, lead time, and minimum order quantity through the Request a Quote form on this page. The Texas Instruments product page identifies the TPA3122D2 family and its 10 V to 26 V operating range, while the 20-pin PDIP orderable variant is TPA3122D2N. A quote response should confirm availability for that exact suffix.

کے لیے انجینئرنگ ریفرنس ڈیٹا TPA3122D2N — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose TPA3122D2N when a design needs a high-efficiency Class-D stage with 15 W per channel, a 10 V to 26 V supply, selectable fixed gains, and 4 Ω stereo-load capability. It is also appropriate when the same board must support 30 W bridge-tied mono operation. Consider TPA3125D2N when its lower 10 W per channel rating is sufficient, particularly when lower output headroom is acceptable and the full pin configuration has been verified. Do not choose either solely from the PDIP package description: compare supply limits, gain pins, shutdown behavior, output topology, thermal limits, and protection features in the manufacturer datasheets. A cross-brand substitute should be selected only after confirming the same 20-pin PDIP footprint, complete pin-function match, comparable output power, and compatible system behavior. For a new design, TPA3122D2N provides the greater output-power margin, making it the stronger starting point for small speaker systems.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ TPA3125D2N
Brand Texas Instruments Texas Instruments
Package 20-pin PDIP 20-pin PDIP
Rated Stereo Output Power 15 W per channel 10 W per channel
Amplifier Class Class D Class D
Number of Channels 2 channels 2 channels

اہم امتیازی خصوصیات

  • Higher rated stereo output power (بمقابلہTPA3125D2N)
  • Selection of the same-package alternative (بمقابلہTPA3125D2N)
  • Flexible stereo and mono configurations (بمقابلہTPA3125D2N)

ڈیزائن نوٹس

Class-D efficiency reduces the heat that must be removed during music playback, but output power, supply voltage, and load impedance still determine thermal stress. Provide copper around the PDIP pads and maintain airflow when both channels operate continuously at maximum rated output. Use the manufacturer power tables and thermal information to verify junction temperature; do not assume that music-playback efficiency guarantees unrestricted continuous-output capability.

Route the Class-D speaker outputs as short and direct as practical, keep the switching output loop compact, and avoid placing sensitive audio inputs beside high-current output traces. Place the required input, supply, and compensation or filtering components at the locations shown in the manufacturer application circuit. The 20-pin PDIP footprint also needs pin-1 orientation and package-clearance checks against the board outline and mounting-hole pattern.

The 10 V to 26 V supply range is central to both output capability and device protection. Decouple the supply at the IC using the capacitance and placement specified by the manufacturer, and keep switching-node current out of the analog input return path. When using bridge-tied mono operation, verify that the speaker load and output network are appropriate because both output pins are active and the load is driven differentially.

Do not assume that identical package names guarantee safe substitution. TPA3122D2N and TPA3125D2N both appear in 20-pin PDIP options, but their documented output ratings differ by 5 W per channel. Before replacing one with the other, compare the complete pin-description tables, gain programming, shutdown behavior, supply limits, output configuration, and rated load. The lower-power device can also change clipping headroom and enclosure thermal requirements.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The manufacturer product page and available search results do not provide explicit compliance statements for this ordering code. Confirm RoHS, REACH, lead-free, halogen-free, automotive qualification, and conflict-minerals status using the manufacturer's current product documentation.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

tpa3122d2 amplifier board tpa3122d2 datasheet TPA3122D2N datasheet pdf TPA3122D2N pinout TPA3122D2N equivalent TPA3122D2N replacement TPA3122D2N vs TPA3125D2N TPA3122D2N 15W Class-D amplifier Texas Instruments TPA3122D2N TPA3122D2N price TPA3122D2N stock TPA3122D2N 20-pin PDIP

متعلقہ اجزاء اور اصطلاحات

Texas Instruments TPA3122D2N TPA3122D2 TPA3125D2N Class-D amplifier audio power amplifier stereo amplifier bridge-tied load single-ended output 15 W per channel 30 W mono output 10 V to 26 V supply 4 Ω speaker load fixed gain settings internal oscillator 20-pin PDIP PDIP package through-hole package Class-D efficiency thermal management speaker amplifier power management IC
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں