TS5V330D - 300MHz Quad SPDT Video Switch | Texas Instruments
MPN: TS5V330D ✓ AktifTS5V330D Genel Bakış
A video switch is an analog multiplexer or demultiplexer used to route high-speed video signals between sources and destinations. Within the signal-chain hierarchy, this quad SPDT arrangement provides four independently selectable 2:1 paths, combining space-efficient routing with a common control interface. Unlike a digital multiplexer, an analog video switch must preserve signal amplitude, bandwidth, crosstalk performance, and impedance continuity as the selected path changes.
Key features include 300 MHz bandwidth, 4 V to 5.5 V operation, low on-state resistance, -63 dB crosstalk, and four channels in one package. The 300 MHz bandwidth supports high-definition and component or progressive video formats, while the 2:1 configuration allows a source-selection function without requiring a separate downstream mux. The shared enable input simplifies system control and supports coordinated switching of all four channels.
The TS5V330 operates as a 4-bit, 1-of-2 multiplexer or demultiplexer. Each SPDT path provides a dedicated signal terminal for each input and an output terminal, enabling either video-routing or signal-selection use. A 16-pin SOIC package supports conventional surface-mount assembly, while its operating-temperature range of -40 °C to 85 °C suits industrial and commercial equipment. Exact on-resistance, insertion loss, return loss, channel capacitance, and enable timing values should be taken from the manufacturer datasheet when sizing the complete signal path.
Typical uses include video-source selection, video test equipment, broadcast and professional video routing, imaging-system interface switching, and multiple-input display systems. In each case, the 300 MHz bandwidth permits high-frequency analog signals while the four integrated channels reduce the number of separate switch packages required on a board. Designers should preserve controlled-impedance routing and provide a low-impedance return path to avoid reflections and additional crosstalk.
A key design consideration is the relationship between source impedance, switch on-state resistance, load capacitance, and allowable video bandwidth. Keep traces short, use impedance-controlled routing where applicable, and place the device close to the signal source. For systems requiring channel-to-channel switching, ensure the enable timing and control levels satisfy the timing budget of the video source.
This page consolidates the verified TS5V330D device characteristics, application guidance, comparison fields, and PCB design considerations into one engineering-focused reference. It also separates confirmed manufacturer information from parameters that still require confirmation in the latest device documentation.
Drop-in alternatifler için TS5V330D — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
TS5V330CDR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
TS5V330DR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
PI5V330WE
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
TS5V330D Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | 4-channel, 2:1 SPDT video switch |
| Number of Channels | 4 channels |
| Switch Configuration | Quad SPDT |
| Signal Multiplexing Configuration | 4 × 1:2 |
| Bandwidth | 300 MHz |
| Crosstalk | -63 dB |
| Supply Voltage Range | 4 V to 5.5 V |
| Nominal Supply Voltage | 5 V |
| Enable Control | Single switch-enable input |
| İşletim Sıcaklığı Aralığı | -40 °C to 85 °C |
| Paket | 16-pin SOIC |
| Montaj Türü | Surface mount |
TS5V330D 16-pin soic Pin Yapısı Kılavuzu
TS5V330D (16-pin soic paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: TS5V330D.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
TS5V330D için uygundur 6 uygulamas: High-Definition Video Source Selection, Professional Video Signal Routing, Video Test and Measurement Equipment, Broadcast and Studio Input Selection, Imaging-System Interface Switching, Display and Multi-Input Interface Switching.
High-Definition Video Source Selection
The TS5V330D suits video-source selection because it combines four 2:1 SPDT channels with 300 MHz bandwidth and -63 dB crosstalk in one 16-pin SOIC package. Each channel can route one of two inputs to a common output, while the shared enable input coordinates the switching state. This integration reduces the number of discrete switch packages and makes the device suitable for compact HD-video selectors, monitor input routers, and professional video panels. Designers should preserve controlled-impedance routing, use a continuous ground plane, and place decoupling close to the supply pins. Source and load impedance, cable length, connector construction, and PCB parasitics still determine the usable channel performance in the completed system.
Professional Video Signal Routing
The four-channel SPDT architecture of the TS5V330D is appropriate for professional video routing panels that need to select between paired analog video sources. Its 300 MHz bandwidth provides margin for high-definition component signals, while the -63 dB crosstalk specification supports isolation between routed channels. A shared enable input simplifies control logic compared with four independently enabled devices. For bench and studio equipment, place the switch near connector transitions, maintain a uniform ground reference, and validate insertion loss and return loss across the operating frequency range. The low on-state resistance is important because it forms part of the total source-to-load impedance and can influence signal amplitude and impedance matching.
Video Test and Measurement Equipment
The TS5V330D can select test signals for oscilloscopes, waveform generators, video analyzers, and automated inspection systems. Its four 2:1 paths provide more routing flexibility than a single switch, and the 300 MHz bandwidth supports high-frequency test waveforms. The shared enable input can support coordinated routing when multiple measurements must use the same source configuration. In these applications, use short connections between the switch and measurement front end, minimize stub branches, and preserve a common ground plane to reduce reflections. Confirm the instrument impedance, acceptable loading, expected signal attenuation, and switching timing before constructing the measurement path.
Broadcast and Studio Input Selection
The TS5V330D is useful in broadcast and studio equipment for selecting one of two video feeds per channel. Four integrated SPDT paths allow a compact routing stage, and the 300 MHz bandwidth is compatible with many high-definition analog video signals. The -63 dB crosstalk figure helps limit unwanted coupling between adjacent routed channels. For installation inside rack equipment, keep connector transitions and switch circuitry on a controlled-impedance board, use a solid ground reference, and separate control traces from sensitive video paths. Verify the actual channel bandwidth, insertion loss, return loss, and enable timing at the frequencies used by the production workflow before approving the design for deployment.
Imaging-System Interface Switching
The TS5V330D can route high-frequency analog outputs in imaging and machine-vision interfaces where two sensor or processor paths must feed a shared downstream stage. The quad SPDT arrangement reduces package count, while the common enable control simplifies coordinated state changes. Its 300 MHz bandwidth is well suited to systems that must preserve transitions and timing relationships across selectable paths. Route paired inputs symmetrically to minimize impedance mismatch between the two states, maintain adequate return-path continuity, and avoid placing high-current switching or converter nodes near the video traces. Bench measurements should confirm that connector and cable behavior does not dominate the switch performance.
Display and Multi-Input Interface Switching
The TS5V330D can select between two analog video inputs in display and multi-input interface equipment. Four channels support several independent selections in a compact board area, and the 2:1 architecture keeps routing logic simpler than a larger multiplexer. The 300 MHz bandwidth and low on-state resistance help preserve fast video transitions, while the -63 dB crosstalk specification reduces interaction between channels. Place the device close to the input connectors, use matched trace geometry, and provide local supply bypassing to minimize switching-related disturbance. Confirm the display’s expected impedance, signal amplitude, settling requirement, and whether the selected input must remain stable during control transitions.
Mühendislik referans verileri: TS5V330D — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Brand | Texas Instruments |
| Package | 16-pin SOIC |
| Device Type | Quad SPDT video switch |
| Number of Channels | 4 channels |
| Switch Configuration | 2:1 SPDT per channel |
| Bandwidth | 300 MHz |
| Crosstalk | -63 dB |
| Supply Voltage Range | 4 V to 5.5 V |
| Operating Temperature Range | -40 °C to 85 °C |
Ana Farklılayıcılar
- Four routing channels in one package (karşılaştırma:Discrete four-channel video-switch implementation)
- Wide-band analog routing capability (karşılaştırma:Lower-bandwidth logic mux implementation)
- Common switching control (karşılaştırma:Four separately controlled discrete SPDT switches)
Tasarım Notları
Treat each selected TS5V330D path as a continuous transmission line when video rise times are short relative to the routed distance. Route both inputs of an SPDT channel with similar geometry, maintain a continuous ground reference, and avoid unnecessary test pads or branches. The 300 MHz device bandwidth alone does not guarantee acceptable system performance; connector transitions, impedance discontinuities, source and load impedances, and PCB loss must also be included in the channel analysis.
Place the TS5V330D close to the video connector or source to minimize exposed trace length, and connect supply and ground pins with short, low-inductance paths. Follow the manufacturer pin-configuration diagram when assigning all 16 pins, and use local high-frequency bypassing where recommended. Maintain symmetry between the two inputs of each channel so switching does not introduce a different impedance transition for each selected state.
Do not interpret the 300 MHz bandwidth specification as permission to terminate or route the video path arbitrarily. Confirm the maximum on-state resistance, insertion loss, return loss, channel capacitance, and enable timing in the manufacturer datasheet for the actual frequency. Also verify that the 4 V to 5.5 V supply remains within tolerance during startup and load transients, because supply disturbance can affect analog signal integrity in addition to logic control.
Uyumluluk Bilgisi
Compliance attributes are not stated in the manufacturer page excerpt or product-search records used for this product. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status in the latest manufacturer documentation or declarations before qualification.