Texas Instruments

TS5V330D - 300MHz Quad SPDT Video Switch | Texas Instruments

Артикул: TS5V330D ✓ Активен
4 V to 5.5 V Vdss 16-pin SOIC Package
MOQ: 1 |

TS5V330D Обзор

The Texas Instruments TS5V330D is a four-channel 2:1 SPDT video switch with 300 MHz bandwidth, -63 dB crosstalk, and a 4 V to 5.5 V supply range, housed in a 16-pin SOIC package. Each channel can route one of two video inputs to one output, while a shared enable input controls the switch state. The low on-state resistance makes the device suitable for analog video routing systems requiring high-frequency signal integrity.

A video switch is an analog multiplexer or demultiplexer used to route high-speed video signals between sources and destinations. Within the signal-chain hierarchy, this quad SPDT arrangement provides four independently selectable 2:1 paths, combining space-efficient routing with a common control interface. Unlike a digital multiplexer, an analog video switch must preserve signal amplitude, bandwidth, crosstalk performance, and impedance continuity as the selected path changes.

Key features include 300 MHz bandwidth, 4 V to 5.5 V operation, low on-state resistance, -63 dB crosstalk, and four channels in one package. The 300 MHz bandwidth supports high-definition and component or progressive video formats, while the 2:1 configuration allows a source-selection function without requiring a separate downstream mux. The shared enable input simplifies system control and supports coordinated switching of all four channels.

The TS5V330 operates as a 4-bit, 1-of-2 multiplexer or demultiplexer. Each SPDT path provides a dedicated signal terminal for each input and an output terminal, enabling either video-routing or signal-selection use. A 16-pin SOIC package supports conventional surface-mount assembly, while its operating-temperature range of -40 °C to 85 °C suits industrial and commercial equipment. Exact on-resistance, insertion loss, return loss, channel capacitance, and enable timing values should be taken from the manufacturer datasheet when sizing the complete signal path.

Typical uses include video-source selection, video test equipment, broadcast and professional video routing, imaging-system interface switching, and multiple-input display systems. In each case, the 300 MHz bandwidth permits high-frequency analog signals while the four integrated channels reduce the number of separate switch packages required on a board. Designers should preserve controlled-impedance routing and provide a low-impedance return path to avoid reflections and additional crosstalk.

A key design consideration is the relationship between source impedance, switch on-state resistance, load capacitance, and allowable video bandwidth. Keep traces short, use impedance-controlled routing where applicable, and place the device close to the signal source. For systems requiring channel-to-channel switching, ensure the enable timing and control levels satisfy the timing budget of the video source.

This page consolidates the verified TS5V330D device characteristics, application guidance, comparison fields, and PCB design considerations into one engineering-focused reference. It also separates confirmed manufacturer information from parameters that still require confirmation in the latest device documentation.

Аналоги без доработки для TS5V330D — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

TS5V330CDR

✅ Прямая замена
📦 16-pin SOIC
Same TS5V330 four-channel 2:1 architecture and 16-pin SOIC footprint; ordering suffix changes the shipment format, while the comparison identifies somewhat different electrical characteristics.

📋 Справочный аналог (нет в каталоге)

TS5V330DR

✅ Прямая замена
📦 16-pin SOIC
Same TS5V330 four-channel 2:1 architecture and 16-pin SOIC footprint; ordering suffix changes the shipment format, while the comparison identifies somewhat different electrical characteristics.

📋 Справочный аналог (нет в каталоге)

PI5V330WE

✅ Прямая замена
📦 16-pin SOIC
Cross-reference identifies consistent terminals, package, functional characteristics, and principal performance parameters; on-state resistance, bandwidth, timing, and control details require datasheet verification.

📋 Справочный аналог (нет в каталоге)

TS5V330D Максимальные параметры и электрические характеристики

Device Type 4-channel, 2:1 SPDT video switch
Number of Channels 4 channels
Switch Configuration Quad SPDT
Signal Multiplexing Configuration 4 × 1:2
Bandwidth 300 MHz
Crosstalk -63 dB
Supply Voltage Range 4 V to 5.5 V
Nominal Supply Voltage 5 V
Enable Control Single switch-enable input
Диапазон рабочих температур -40 °C to 85 °C
Корпус 16-pin SOIC
Тип монтажа Surface mount

Руководство по цоколевке TS5V330D в корпусе 16-pin soic

Цоколевка для TS5V330D (корпус 16-pin soic). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 16-pin soic для TS5V330D

Нет подробных данных о распиновке для TS5V330D.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

TS5V330D подходит для 6 применениеs: High-Definition Video Source Selection, Professional Video Signal Routing, Video Test and Measurement Equipment, Broadcast and Studio Input Selection, Imaging-System Interface Switching, Display and Multi-Input Interface Switching.

📺

High-Definition Video Source Selection

The TS5V330D suits video-source selection because it combines four 2:1 SPDT channels with 300 MHz bandwidth and -63 dB crosstalk in one 16-pin SOIC package. Each channel can route one of two inputs to a common output, while the shared enable input coordinates the switching state. This integration reduces the number of discrete switch packages and makes the device suitable for compact HD-video selectors, monitor input routers, and professional video panels. Designers should preserve controlled-impedance routing, use a continuous ground plane, and place decoupling close to the supply pins. Source and load impedance, cable length, connector construction, and PCB parasitics still determine the usable channel performance in the completed system.

📺

Professional Video Signal Routing

The four-channel SPDT architecture of the TS5V330D is appropriate for professional video routing panels that need to select between paired analog video sources. Its 300 MHz bandwidth provides margin for high-definition component signals, while the -63 dB crosstalk specification supports isolation between routed channels. A shared enable input simplifies control logic compared with four independently enabled devices. For bench and studio equipment, place the switch near connector transitions, maintain a uniform ground reference, and validate insertion loss and return loss across the operating frequency range. The low on-state resistance is important because it forms part of the total source-to-load impedance and can influence signal amplitude and impedance matching.

🖥️

Video Test and Measurement Equipment

The TS5V330D can select test signals for oscilloscopes, waveform generators, video analyzers, and automated inspection systems. Its four 2:1 paths provide more routing flexibility than a single switch, and the 300 MHz bandwidth supports high-frequency test waveforms. The shared enable input can support coordinated routing when multiple measurements must use the same source configuration. In these applications, use short connections between the switch and measurement front end, minimize stub branches, and preserve a common ground plane to reduce reflections. Confirm the instrument impedance, acceptable loading, expected signal attenuation, and switching timing before constructing the measurement path.

📡

Broadcast and Studio Input Selection

The TS5V330D is useful in broadcast and studio equipment for selecting one of two video feeds per channel. Four integrated SPDT paths allow a compact routing stage, and the 300 MHz bandwidth is compatible with many high-definition analog video signals. The -63 dB crosstalk figure helps limit unwanted coupling between adjacent routed channels. For installation inside rack equipment, keep connector transitions and switch circuitry on a controlled-impedance board, use a solid ground reference, and separate control traces from sensitive video paths. Verify the actual channel bandwidth, insertion loss, return loss, and enable timing at the frequencies used by the production workflow before approving the design for deployment.

📷

Imaging-System Interface Switching

The TS5V330D can route high-frequency analog outputs in imaging and machine-vision interfaces where two sensor or processor paths must feed a shared downstream stage. The quad SPDT arrangement reduces package count, while the common enable control simplifies coordinated state changes. Its 300 MHz bandwidth is well suited to systems that must preserve transitions and timing relationships across selectable paths. Route paired inputs symmetrically to minimize impedance mismatch between the two states, maintain adequate return-path continuity, and avoid placing high-current switching or converter nodes near the video traces. Bench measurements should confirm that connector and cable behavior does not dominate the switch performance.

🖥️

Display and Multi-Input Interface Switching

The TS5V330D can select between two analog video inputs in display and multi-input interface equipment. Four channels support several independent selections in a compact board area, and the 2:1 architecture keeps routing logic simpler than a larger multiplexer. The 300 MHz bandwidth and low on-state resistance help preserve fast video transitions, while the -63 dB crosstalk specification reduces interaction between channels. Place the device close to the input connectors, use matched trace geometry, and provide local supply bypassing to minimize switching-related disturbance. Confirm the display’s expected impedance, signal amplitude, settling requirement, and whether the selected input must remain stable during control transitions.

What is the TS5V330D?
The TS5V330D is a four-channel, 2:1 SPDT video switch from Texas Instruments. It provides 300 MHz bandwidth, -63 dB crosstalk, a common enable input, and a 4 V to 5.5 V operating supply range in a 16-pin SOIC package. According to the manufacturer product page, the device is intended for routing high-frequency analog video signals through four selectable 2:1 paths.
What are the key specifications of TS5V330D that engineers should know?
The TS5V330D combines four 2:1 SPDT channels, 300 MHz bandwidth, and -63 dB crosstalk in a 16-pin SOIC package. Its specified supply range is 4 V to 5.5 V, with 5 V as the nominal operating condition. According to the manufacturer datasheet, the device also uses a single switch-enable input and low on-state resistance. Verify the exact resistance, insertion loss, capacitance, and timing limits for the operating frequency in the latest datasheet.
Where can I download the TS5V330D datasheet PDF?
The official TS5V330D documentation is available through the Texas Instruments TS5V330 product page and its linked datasheet. The manufacturer datasheet is the controlling source for the pin configuration, electrical limits, timing characteristics, and recommended application circuit. Use the document associated with TS5V330 and verify the ordering information for the TS5V330D 16-pin SOIC option before releasing a design.
Where can I find the TS5V330D pinout?
The TS5V330D pinout is presented in the pin-configuration section of the manufacturer datasheet for the 16-pin SOIC package. The device contains four 2:1 SPDT channels and a common enable input, so the pin assignments must be followed exactly when assigning the four video inputs, outputs, supply rails, ground connections, and control signal. Use the manufacturer diagram as the PCB and inspection reference.
What supply voltage does the TS5V330D require?
The TS5V330D operates from 4 V to 5.5 V, with 5 V identified as the nominal supply condition. According to the manufacturer product information, this range applies to the complete four-channel video-switch device. Decoupling and layout should be designed for stable operation across the full range rather than only at the nominal voltage.
What video bandwidth does the TS5V330D support?
The TS5V330D provides 300 MHz bandwidth as specified for the quad SPDT video-switch family. This allows the device to route high-definition and other high-frequency analog video signals. Actual usable system bandwidth also depends on source and load impedances, PCB routing, connector and trace losses, capacitance, and the switching configuration, so the complete signal chain should be simulated or measured.
How does TS5V330D compare with a discrete four-channel video switch?
The TS5V330D integrates four 2:1 SPDT channels, a common enable input, and the associated analog routing functions into one 16-pin SOIC package. A discrete implementation would require more packages, additional routing, and separate control coordination. The integrated device reduces board area and control complexity, but designers must still account for package parasitics, routing symmetry, source impedance, and the device's specified insertion loss and return loss.
Is TS5V330D suitable for high-definition video routing?
The TS5V330D is suitable for many high-definition video-routing tasks because it combines four 2:1 channels with 300 MHz bandwidth and -63 dB crosstalk. According to the manufacturer description, its low on-state resistance supports high-frequency analog signal routing. Suitability for a particular interface also depends on connector type, impedance, cable length, source and load specifications, and the required settling behavior.
What is the crosstalk of TS5V330D?
The specified crosstalk of the TS5V330D is -63 dB. Lower, more-negative values indicate less unwanted signal coupling between channels. Crosstalk performance depends on signal frequency, source and load impedances, and PCB layout, so the -63 dB figure should be evaluated under conditions similar to the intended video system. Keep sensitive video paths separated and use a continuous ground reference under the device.
When should I choose the TS5V330D for a video multiplexer design?
Choose the TS5V330D when the design needs four compact 2:1 analog video paths with a shared enable control, 300 MHz bandwidth, and a 4 V to 5.5 V supply. It is especially useful when board area and control simplicity matter more than implementing separate discrete switches. Verify the exact on-resistance, insertion loss, capacitance, enable timing, and signal amplitude limits against the manufacturer datasheet before finalizing the design.
Can TS5V330D be used as both a multiplexer and a demultiplexer?
Yes, the TS5V330D can function as a 4-bit, 1-of-2 multiplexer or demultiplexer because each SPDT channel has two selectable signal paths. In a multiplexer arrangement, two sources feed one destination; in a demultiplexer arrangement, one source can be routed toward either of two destinations. The selected path is controlled by the device logic, while proper termination and signal-impedance design remain application responsibilities.
What can replace the TS5V330D on the same PCB?
No verified same-package, pin-to-pin replacement for the TS5V330D is identified in the current manufacturer and cross-reference information. A replacement should use the 16-pin SOIC footprint and match the 4 V to 5.5 V supply, 300 MHz bandwidth, -63 dB crosstalk, four 2:1 channels, and shared enable behavior. Use the Request a Quote form on this page to ask for a qualified sourcing review, and do not assume a similar mux is drop-in compatible.
Is TS5V330D the same as TS5V330?
TS5V330D is the orderable 16-pin SOIC version associated with the Texas Instruments TS5V330 video-switch family. The TS5V330 product page identifies the family as a 5 V, 2:1, four-channel video switch, while TS5V330D identifies the specific device ordering option. Confirm suffix, package, temperature grade, pinout, and production status against the manufacturer ordering information before substituting one identifier for the other.
What is the best cross-brand equivalent for TS5V330D?
The best cross-brand equivalent cannot be identified from the current cross-reference results without a verified candidate that matches the TS5V330D pinout and electrical limits. A valid replacement must use the same 16-pin SOIC footprint, provide four 2:1 channels, support 4 V to 5.5 V, retain approximately 300 MHz bandwidth and -63 dB crosstalk, and use a compatible enable interface. Request a sourcing review through the Request a Quote form on this page.
Where can I buy TS5V330D online?
Use the Request a Quote form on this page to request TS5V330D availability, current lead time, and minimum-order details. The commercial record does not provide a verified unit price or a confirmed stock quantity for this exact suffix, so no price or stock claim is made here. Include the required package, quantity, and target delivery date when submitting the request.
What is the price of TS5V330D?
The current price for TS5V330D should be obtained through the Request a Quote form on this page because no qualifying quantity-break price is confirmed for the exact 16-pin SOIC ordering option. The form supports a current sourcing quotation rather than a static price that may change with quantity, availability, or market conditions. Provide the required quantity and destination for the most useful response.
What is the lead time and stock status for TS5V330D?
Request current TS5V330D stock, lead time, and minimum-order quantity through the Request a Quote form on this page. A distributor page confirms the ordering option, but it does not establish a fixed stock level or guaranteed delivery schedule for the quantities needed by a specific build. The sourcing response should be used for planning rather than assuming immediate availability.
What PCB layout practices are important for TS5V330D?
Place the TS5V330D close to the video source and route each selected path with a continuous ground reference. According to the manufacturer application guidance for high-frequency video switches, short traces, controlled impedances, adequate supply decoupling, and separation between sensitive channels help limit reflection and coupling. Preserve symmetry between the two inputs of each SPDT channel and confirm the pin assignments from the manufacturer pin-configuration diagram.

Справочные инженерные данные для TS5V330D — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the TS5V330D when the design requires four compact 2:1 analog video paths, a common enable input, and operation across 4 V to 5.5 V. Its 300 MHz bandwidth and -63 dB crosstalk make it appropriate for many high-definition routing, test, broadcast, imaging, and display applications. A discrete implementation may offer more freedom in switching configuration, but it increases package count, routing complexity, and control overhead. Before selecting the device, verify that your source and load impedances suit the on-state resistance and capacitance, and that the enable timing meets the system settling requirement. The PCB must preserve signal symmetry, a continuous ground reference, controlled impedances, and low-supply noise. No verified same-footprint replacement is currently established, so changing to another mux should be treated as a redesign unless its pinout and electrical characteristics are formally confirmed.

Сравнение с аналогами

Параметр Этот товар
Brand Texas Instruments
Package 16-pin SOIC
Device Type Quad SPDT video switch
Number of Channels 4 channels
Switch Configuration 2:1 SPDT per channel
Bandwidth 300 MHz
Crosstalk -63 dB
Supply Voltage Range 4 V to 5.5 V
Operating Temperature Range -40 °C to 85 °C

Ключевые отличия

  • Four routing channels in one package (против Discrete four-channel video-switch implementation)
  • Wide-band analog routing capability (против Lower-bandwidth logic mux implementation)
  • Common switching control (против Four separately controlled discrete SPDT switches)

Заметки по проектированию

Treat each selected TS5V330D path as a continuous transmission line when video rise times are short relative to the routed distance. Route both inputs of an SPDT channel with similar geometry, maintain a continuous ground reference, and avoid unnecessary test pads or branches. The 300 MHz device bandwidth alone does not guarantee acceptable system performance; connector transitions, impedance discontinuities, source and load impedances, and PCB loss must also be included in the channel analysis.

Place the TS5V330D close to the video connector or source to minimize exposed trace length, and connect supply and ground pins with short, low-inductance paths. Follow the manufacturer pin-configuration diagram when assigning all 16 pins, and use local high-frequency bypassing where recommended. Maintain symmetry between the two inputs of each channel so switching does not introduce a different impedance transition for each selected state.

Do not interpret the 300 MHz bandwidth specification as permission to terminate or route the video path arbitrarily. Confirm the maximum on-state resistance, insertion loss, return loss, channel capacitance, and enable timing in the manufacturer datasheet for the actual frequency. Also verify that the 4 V to 5.5 V supply remains within tolerance during startup and load transients, because supply disturbance can affect analog signal integrity in addition to logic control.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

Compliance attributes are not stated in the manufacturer page excerpt or product-search records used for this product. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status in the latest manufacturer documentation or declarations before qualification.

Похожие запросы

TS5V330D datasheet TS5V330D pinout TS5V330D datasheet pdf TS5V330D specifications TS5V330D equivalent TS5V330D replacement TS5V330D cross reference TS5V330D footprint TS5V330D price TS5V330D stock Texas Instruments TS5V330D TS5V330D 300MHz video switch TS5V330D SOIC-16 pinout TS5V330D video routing application TS5V330D vs TS5V330

Связанные компоненты & термины

Texas Instruments TS5V330D TS5V330 video switch analog switch SPDT switch quad SPDT video multiplexer video demultiplexer 4 × 1:2 configuration 300 MHz bandwidth -63 dB crosstalk low on-state resistance single enable input 4 V to 5.5 V supply 16-pin SOIC SOIC family surface-mount package high-definition video broadcast video routing video test equipment machine vision display input selection signal integrity
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ