STMicroelectronics

TS972IPT - Dual Low-Noise Rail-to-Rail Op Amp | STMicroelectronics

MPN: TS972IPT ✓ Aktif
2.7 V to 10 V Vdss 8-pin TSSOP Package
MOQ: 1 |

TS972IPT Genel Bakış

STMicroelectronics TS972IPT is a dual general-purpose operational amplifier with rail-to-rail output swing, 12 MHz gain-bandwidth product, 4 V/us slew rate, and operation from ±1.35 V, making it suitable for portable and battery-powered equipment. The device is packaged in an 8-pin TSSOP and is designed for instrumentation, signal conditioning, and low-voltage analog systems. Its dual-circuit configuration allows two independent amplifier channels in one package, reducing board area and simplifying power routing when both channels share the same supply voltage.

The TS972 belongs to the TS97x family of low-noise operational amplifiers. An operational amplifier is an analog signal-processing IC that uses high open-loop gain to amplify differences between two input voltages. The TS97x family is designed for low-voltage operation, rail-to-rail output signal swing, and portable applications where supply voltage, power consumption, and signal headroom are important design constraints.

Key characteristics include a 12 MHz gain-bandwidth product, 4 V/us slew rate, dual amplifier channels, and an 8-pin TSSOP package. The rail-to-rail output stage allows the output to approach the supply rails more closely than a conventional non-rail-to-rail output stage. This is valuable in low-voltage systems where usable output range is limited and improves the effective signal range available to downstream analog and digital circuits.

The TS97x family operates with voltages as low as ±1.35 V, according to STMicroelectronics product information, and the TS972IPT is identified as a 2.7 V to 10 V supply-range device in the listed technical data. The combination of low-noise operation and moderate bandwidth supports applications such as sensor interfaces, buffer stages, audio signal paths, and general-purpose analog amplification. The dual package is particularly useful when a design requires two similar channels with matching supply and ground connections.

Typical uses include battery-powered instrumentation, portable measurement systems, active filtering, signal conditioning, and low-voltage sensor interfaces. The 12 MHz bandwidth provides useful speed for signals beyond static or very-low-frequency operation, while the 4 V/us slew rate helps preserve large-signal response. In designs using the rail-to-rail output, the output still requires adequate output-current capability and suitable load conditions for the selected operating point.

When laying out a TS972IPT circuit, place input and output components close to their associated pins and keep sensitive input traces short and away from switching-current paths. Check the required common-mode input range, output swing, load, supply voltage, and stability conditions against the manufacturer datasheet before finalizing the application. The TSSOP package also requires careful thermal planning when both amplifier channels dissipate significant power.

Drop-in alternatifler için TS972IPT — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller TS972IPT (aynı form faktörü ve ayağa oturma) — farklı olan Package, Amplifier Type, Number of Amplifiers.

STMicroelectronics
Package: 8-pin SOIC
Number of Amplifiers: 2 circuits
İle Karşılaştır TS972IPT →
STMicroelectronics
Package: 8-DFN, 3 x 3 mm
Amplifier Type: General-purpose operational amplifier
İle Karşılaştır TS972IPT →

TS972IQT

✅ Yerleştirme
STMicroelectronics
📦 8-pin TSSOP
General-purpose operational amplifier · 2 channels · 12 MHz · 2.7 V to 10 V · Yes · Very low noise · Low power · 8-DFN, 3 x 3 mm

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

TS972IYPT

✅ Yerleştirme
📦 8-pin TSSOP
Same TS972 core and 8-pin TSSOP footprint; 12 MHz bandwidth difference is 0%, with a different qualification classification

📋 Katalogda Olmayan Referans Alternatifi

TS462CPT

✅ Yerleştirme
📦 8-pin TSSOP
Same 8-pin TSSOP footprint and dual-amplifier format; nominal bandwidth difference is unavailable, so a conservative 80% parameter match is assigned

📋 Katalogda Olmayan Referans Alternatifi

TS972IPT Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type Dual operational amplifier
Number of Amplifiers 2
Gain-Bandwidth Product 12 MHz
Slew Rate 4 V/us
Supply Voltage Range 2.7 V to 10 V
Minimum Total Supply Voltage ±1.35 V
Output Swing Rail-to-rail signal swing
Unity-Gain Bandwidth 12 MHz
Paket 8-pin TSSOP
Montaj Türü Surface mount
Yaşam Döngüsü Durumu Active

TS972IPT 8-pin tssop Pin Yapısı Kılavuzu

TS972IPT (8-pin tssop paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

8-pin tssop paket pin çizelgesi için TS972IPT

Ayrıntılı pin çıkış verisi mevcut değil: TS972IPT.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

TS972IPT için uygundur 6 uygulamas: Battery-Powered Sensor Interface, Portable Instrumentation, Active Filtering, Audio Signal Conditioning, Industrial Control Signal Conditioning, General-Purpose Analog Buffering.

🧩

Battery-Powered Sensor Interface

TS972IPT fits low-voltage sensor front ends that need more usable signal range than a conventional amplifier output can provide. Its rail-to-rail output swing and operation from a low supply are useful for buffering pressure, temperature, and position sensors without wasting headroom. The two channels can amplify or buffer complementary signals on one board, while 12 MHz bandwidth provides margin for moderately responsive sensor systems. Designers should verify the sensor output range against the input common-mode limits and select resistor values that preserve signal-chain stability.

📱

Portable Instrumentation

TS972IPT is appropriate for portable measurement instruments powered from a low-voltage battery or regulated rail. The dual amplifier arrangement reduces package count when processing two channels, while rail-to-rail output improves measurement utilization in compact systems. Its 12 MHz bandwidth and 4 V/us slew rate are suitable for instrument blocks that need moderate signal bandwidth rather than only static accuracy. Layout should keep sensitive inputs away from display, reference, and switching-supply paths to avoid injecting noise into the measurement result.

🔧

Active Filtering

TS972IPT can implement active filters and signal-conditioning blocks where the 12 MHz gain-bandwidth product offers useful loop-gain margin beyond low-frequency sensor signals. Two channels allow paired filter sections or a filter plus output buffer on the same TSSOP package. Rail-to-rail output can improve headroom in low-voltage filter designs, but component tolerances, feedback-network scaling, and the amplifier's noise and stability characteristics must be checked during simulation. Place feedback and compensation components close to the corresponding amplifier pins.

🎧

Audio Signal Conditioning

TS972IPT can serve as a low-voltage audio preamplifier or signal-conditioning stage when the circuit requires two related channels and moderate bandwidth. The 12 MHz gain-bandwidth product accommodates audio-band signals with additional loop margin, and rail-to-rail output can increase headroom in portable audio equipment. The dual-channel configuration is useful for stereo or balanced audio paths. Verify output load, output-current capability, noise performance, and channel matching against the manufacturer data before using it where channel symmetry is critical.

🏭

Industrial Control Signal Conditioning

TS972IPT is suitable for low-voltage industrial signal-conditioning stages where sensor outputs must be amplified before conversion or control. The dual-channel package supports two inputs from one controller while simplifying supply distribution, and the rail-to-rail output helps preserve range in compact control assemblies. The 4 V/us slew rate is useful for signals with faster transitions than typical slow process sensors. Confirm the operating-temperature range and electromagnetic-immunity requirements for the final equipment before deployment.

⚡

General-Purpose Analog Buffering

TS972IPT works as a dual unity-gain buffer when a design needs to isolate a high-impedance source from a downstream load. Rail-to-rail output helps preserve signal amplitude at low supply voltages, while the dual configuration allows buffering of two nodes in a compact circuit. The 12 MHz bandwidth provides more capability than a purely low-frequency reference buffer. Validate source impedance, capacitive loading, output stability, and thermal behavior with the actual source and load because generic buffer assumptions may not apply at the extremes of the operating range.

What is TS972IPT?
TS972IPT is a STMicroelectronics dual operational amplifier in an 8-pin TSSOP package. According to the STMicroelectronics TS972 product information, the TS97x family operates with voltages as low as ±1.35 V and provides rail-to-rail output signal swing. The TS972IPT is listed as a 12 MHz, 4 V/us, low-noise amplifier for portable, battery-supplied, instrumentation, and general-purpose analog applications.
What are the key specifications of TS972IPT that engineers should know?
TS972IPT combines two amplifier channels, a 12 MHz gain-bandwidth product, a 4 V/us slew rate, and rail-to-rail output swing in an 8-pin TSSOP. The listed supply range is 2.7 V to 10 V, while the TS97x family supports operation from ±1.35 V. These specifications make the device relevant for low-voltage signal conditioning, sensor interfaces, filtering, buffering, and portable instrumentation.
What is the operating voltage range of TS972IPT?
The TS972IPT is identified in the technical listing as a 2.7 V to 10 V device, and the STMicroelectronics TS972 product information states that the TS97x family operates with voltages as low as ±1.35 V. In practical circuit design, confirm the exact supply, common-mode, and output-swing limits in the manufacturer datasheet for the selected temperature and load conditions.
What is the bandwidth and slew rate of TS972IPT?
TS972IPT has a listed gain-bandwidth product of 12 MHz and a slew rate of 4 V/us. The bandwidth determines the useful frequency range for many closed-loop amplifier configurations, while slew rate limits how quickly the output can move through large voltage changes. Together, these values suit moderate-speed analog signal paths, active filters, buffers, and portable measurement circuits.
Is TS972IPT rail-to-rail?
Yes. The STMicroelectronics TS972 product information describes the TS97x family as having rail-to-rail output signal swing. This means the output can operate closer to the positive and negative supply limits than a conventional output stage. The usable swing still depends on load current, output configuration, and the detailed conditions specified by the manufacturer datasheet.
Where to download TS972IPT datasheet PDF?
The manufacturer product page for the TS972 family is available at https://www.st.com/en/amplifiers-and-comparators/ts972.html. It is the appropriate starting point for the official electrical characteristics, ordering information, and family documentation. The TS972IPT is also associated with the 8-pin TSSOP package and dual rail-to-rail amplifier configuration described in the product listing.
Where can I find the TS972IPT pinout?
Use the pin description and package drawing in the official STMicroelectronics TS972 documentation. TS972IPT is an 8-pin TSSOP device, so the package diagram identifies the two amplifier channels, their inputs and outputs, and the power connections. Do not infer pin assignments from another amplifier family; verify the pin names and numbering against the TS972 datasheet before PCB routing or prototype assembly.
What can replace TS972IPT?
The closest replacement must be a dual operational amplifier in an 8-pin TSSOP package with compatible power, input, output, and pin assignments. The TS972IQT appears in the site MPN list as a related TS97x-family option, but its exact electrical and pin compatibility should be confirmed from the manufacturer datasheet. No additional cross-brand drop-in candidate is established by the available replacement data.
Is TS972IQT a drop-in replacement for TS972IPT?
TS972IQT is a related TS97x-family part listed with an 8-pin TSSOP configuration, so it is the most relevant same-brand replacement candidate identified here. A true drop-in substitution still requires confirmation of identical pin assignments, supply range, input common-mode behavior, output swing, stability, and electrical limits. Treat it as a qualified replacement candidate only after comparing those parameters.
Is TS972IPT suitable for battery-powered instrumentation?
TS972IPT is suitable for battery-powered instrumentation when the circuit operates within its stated supply and signal limits. The TS97x family supports operation from ±1.35 V, and the TS972IPT is listed for 2.7 V to 10 V operation. Its rail-to-rail output swing is useful in low-voltage systems, while the dual-channel configuration reduces the number of amplifier packages needed when two similar signals are processed.
What is the difference between TS972IPT and TS972IQT?
TS972IPT and TS972IQT are both identified as related TS97x-family dual amplifiers in 8-pin TSSOP packaging, but the exact suffix-specific electrical and qualification differences are not established by the available product data. Before substituting one for the other, compare input offset voltage, bias current, noise, supply current, common-mode range, output swing, and temperature limits in the manufacturer documentation.
When should I choose TS972IPT over a lower-bandwidth amplifier?
Choose TS972IPT when the signal path needs more than static or very-low-frequency amplification and the 12 MHz gain-bandwidth product and 4 V/us slew rate provide useful margin. For slow sensor signals, a lower-bandwidth amplifier may be adequate, but TS972IPT can also simplify a design by providing two channels in one package and improving output range through rail-to-rail operation.
Where to buy TS972IPT online?
Use the Request a Quote form on this page to request TS972IPT availability, packaging details, and current commercial terms. The quote team can confirm the required 8-pin TSSOP variant, current stock status, order quantity, and delivery schedule without relying on an unverified or stale inventory statement.
What is the price of TS972IPT?
TS972IPT pricing depends on order quantity, packaging, market conditions, and current inventory. Use the Request a Quote form on this page to request the current quotation and quantity breaks for the exact TS972IPT MPN. The form is the appropriate route for obtaining a transaction-ready commercial offer for this component.
What is the lead time for TS972IPT and is it in stock?
Current stock status and lead time for TS972IPT should be confirmed through the Request a Quote form on this page. Quote requests can establish the available quantity, standard pack quantity, and expected delivery timing for the exact STMicroelectronics part number. Design releases should use the confirmed schedule rather than an unverified stock claim.
How should TS972IPT be used in a low-voltage sensor interface?
TS972IPT can buffer or amplify a sensor signal when the selected supply keeps the input common-mode voltage, output swing, and load current within the device limits. Its rail-to-rail output is useful when the signal must use much of the available supply range. Keep sensor traces short, place feedback resistors close to the amplifier pins, and validate noise, settling time, and stability with the final source impedance.

Mühendislik referans verileri: TS972IPT — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose TS972IPT when a design needs two low-voltage amplifier channels in one 8-pin TSSOP package, benefits from rail-to-rail output swing, and can benefit from 12 MHz gain-bandwidth product and 4 V/us slew rate. It is especially appropriate for portable instrumentation, low-voltage sensor interfaces, active filtering, and general-purpose buffering. TS972IQT is the closest related same-brand candidate identified for review, but suffix-specific electrical, temperature, and qualification differences must be checked before substitution. A lower-bandwidth amplifier may be preferable for very slow signals when lower power, lower cost, or lower noise is more important. Cross-brand alternatives are not recommended without a separate pin-and-parameter qualification because the available replacement data does not establish a verified cross-brand drop-in device. If the final application requires exact pin compatibility, confirm the official TS972IPT pinout and electrical limits before layout release or production substitution.

Tasarım Notları

Route the two input pairs and feedback networks as short, compact loops. Keep amplifier inputs away from supply-current return paths and switching nodes because input capacitance can convert high-current edges into voltage noise. Place the feedback resistors directly beside the relevant amplifier pins, and maintain a quiet ground reference for both channels when the device performs differential or instrumentation-style signal conditioning.

Decouple the supply pins locally with the capacitance required by the manufacturer application guidance and place the high-frequency bypass capacitor at the package power pin. Check the supply voltage against both the absolute maximum and the operating region. Low-voltage operation is supported, but the available output swing still depends on the load and must be evaluated before assuming a rail-to-rail output reaches either supply rail.

Do not treat rail-to-rail output as unlimited output swing or current capability. Confirm common-mode input range, output-current limits, load impedance, and stability with the actual circuit. Also verify that the selected 8-pin TSSOP footprint and pin assignments match the exact suffix; closely related TS97x parts may differ in temperature grade, reel code, or qualification rather than electrical function.

Estimate dissipation from the actual supply voltage, output voltage, and load current in each amplifier channel. Because the TS972IPT contains two amplifiers in one TSSOP package, both channels can contribute to the package's total heating. Use the manufacturer thermal information for the exact package and board environment, then preserve copper around the device and avoid placing heat-sensitive components immediately beside the TSSOP in high-load conditions.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement is present in the available product information. As a general-purpose operational amplifier, the automotive qualification field is treated as not applicable unless the exact ordering suffix is qualified for automotive use.

İlgili Aramalar

TS972IPT datasheet TS972IPT datasheet pdf TS972IPT pinout TS972IPT specifications TS972IPT equivalent TS972IPT replacement TS972IPT cross reference TS972IPT vs TS972IQT TS972IPT TSSOP-8 footprint STMicroelectronics TS972IPT TS972IPT application circuit TS972IPT price TS972IPT stock TS972IPT 12MHz amplifier TS972IPT rail-to-rail op amp

İlgili Bileşenler ve Terimler

STMicroelectronics TS972IPT TS972IQT TS97x family dual operational amplifier operational amplifier analog signal-processing IC rail-to-rail output gain-bandwidth product slew rate 12 MHz 4 V/us low-noise amplifier 8-pin TSSOP TSSOP package surface-mount package portable equipment battery-powered equipment sensor interface active filter portable instrumentation audio signal conditioning output swing common-mode input voltage
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle