Texas Instruments

TUSB1146RNQR - 10Gbps USB-C Redriver/MUX | Texas Instruments

MPN: TUSB1146RNQR ✓ Aktif
40-pin WQFN (RNQ), 6 mm x 4 mm Package
MOQ: 1 |

TUSB1146RNQR Genel Bakış

The Texas Instruments TUSB1146RNQR is a USB Type-C crosspoint switch and protocol-agnostic linear redriver supporting USB 3.2 data rates up to 10 Gbps and VESA DisplayPort 2.0 up to 10 Gbps. The device is available in a 40-pin WQFN package measuring 6 mm by 4 mm, with an operating temperature range of 0 °C to 70 °C. It supports USB 3.2 SuperSpeed Plus, two DisplayPort lanes, four DisplayPort lanes, and DisplayPort D_DFP pin assignments C, D, and E.

A USB Type-C alternate-mode redriver/MUX is an interface IC that routes high-speed signals between a USB Type-C connector and downstream or host circuitry while compensating for channel loss. It belongs to the signal-conditioning hierarchy of USB interface controllers, redrivers, repeaters, crosspoint switches, and interface ICs. By regenerating and equalizing marginal signals, the TUSB1146 supports reliable high-speed links over longer traces, connectors, cables, or board-to-board transitions than might be possible with passive routing alone.

The TUSB1146 supports USB 3.2 Gen 1 and Gen 2 operation up to 10 Gbps, two-lane and four-lane DisplayPort configurations, and DisplayPort 2.0 UHBR10 signaling up to 10 Gbps. Its adaptive equalization adapts the receive equalization to the connected channel. The protocol-agnostic architecture also allows the device to support non-DisplayPort USB Type-C alternate modes such as HDMI Alternate Mode.

In a downstream-facing host port, the TUSB1146 functions as a linear redriver for selected USB Type-C SuperSpeed and DisplayPort lanes. Adaptive equalization helps restore signal margin when connector or PCB losses reduce eye opening. The linear redriver architecture is particularly useful where designers need signal regeneration without introducing a protocol-specific conversion stage between the Type-C port and the downstream interface.

Typical uses include USB-C docking stations, laptop and tablet docks, multiport adapters, monitor docks, video-capture systems, and industrial USB-C equipment. The D_DFP C, D, and E assignments broaden compatibility with DisplayPort Alternate Mode routing requirements. Systems requiring additional lane routing, conversion, or protocol features should confirm the complete pin configuration and application circuit in the manufacturer datasheet before layout release.

Layout is critical in a 10 Gbps redriver design. Route the high-speed differential pairs as controlled-impedance, tightly coupled traces with minimal stubs and continuous reference planes. Place bypass capacitors close to the supply pins, keep the exposed pad thermally and electrically connected as specified, and follow the manufacturer’s recommended layer transitions and return-path guidance to minimize differential-mode and common-mode conversion.

This product page combines interface classification, application guidance, design cautions, and structured comparison fields to support faster engineering review. It also separates confirmed TUSB1146RNQR characteristics from parameters that still require inspection of the manufacturer datasheet, helping designers avoid assuming unsupported pin, electrical, or compliance details.

Drop-in alternatifler için TUSB1146RNQR — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu ürüne yer değiştirme seçenekleri mevcut değil.

Alternatifleri Talep Edin

TUSB1146RNQR Özellikler

Product Type USB Type-C crosspoint switch, redriver, and MUX
Maximum USB Data Rate 10 Gbps
USB Standard USB 3.2 Gen 1 and Gen 2
DisplayPort Standard VESA DisplayPort 2.0
Maximum DisplayPort Data Rate 10 Gbps (UHBR10)
Supported DisplayPort Lane Configuration 2 DisplayPort lanes or 4 DisplayPort lanes
Equalization Adaptive equalization
Supported D_DFP Pin Assignments C, D, and E
Alternate-Mode Architecture Protocol-agnostic linear redriver
Additional Alternate-Mode Support HDMI Alternate Mode
Paket 40-pin WQFN (RNQ), 6 mm x 4 mm
Pin Sayısı 40 pins
Montaj Türü Surface mount
İşletim Sıcaklığı Aralığı 0 °C to 70 °C

TUSB1146RNQR 40-pin wqfn (rnq), 6 mm x 4 mm Pin Yapısı Kılavuzu

TUSB1146RNQR (40-pin wqfn (rnq), 6 mm x 4 mm paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

40-pin wqfn (rnq), 6 mm x 4 mm paket pin çizelgesi için TUSB1146RNQR

Ayrıntılı pin çıkış verisi mevcut değil: TUSB1146RNQR.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

TUSB1146RNQR için uygundur 6 uygulamas: USB-C Laptop Docking Station, DisplayPort USB-C Monitor Dock, Multiport USB-C Adapter, USB-C Video Capture System, Industrial USB-C Control Panel, Tablet and Portable Accessory Interface.

🖥️

USB-C Laptop Docking Station

The TUSB1146RNQR fits a USB-C docking station that must route high-speed SuperSpeed and DisplayPort traffic through a compact connector, internal PCB transitions, and downstream interfaces. Its support for USB 3.2 Gen 1 and Gen 2 up to 10 Gbps, together with adaptive equalization, provides signal regeneration when connector and trace losses reduce link margin. The 40-pin WQFN package also keeps the active device reasonably compact for a dense dock PCB. In implementation, use controlled-impedance differential routing, continuous reference planes, and the manufacturer’s recommended application circuit. Verify the complete lane and D_DFP assignment before routing because the supported C, D, and E assignments affect which signals reach each downstream port.

📺

DisplayPort USB-C Monitor Dock

The TUSB1146RNQR is appropriate for a monitor dock that carries both USB data and video over USB Type-C. It supports VESA DisplayPort 2.0 up to 10 Gbps through UHBR10 signaling and can support either two or four DisplayPort lanes, enabling lane-allocation flexibility around the Type-C connector. Adaptive equalization helps preserve signal integrity through connector launches and internal routing. A practical design should select the required D_DFP assignment, maintain differential impedance, minimize branch stubs, and provide a continuous ground reference. Because this is a protocol-agnostic linear redriver, the surrounding circuit must still implement the intended downstream DisplayPort interface and required lane mapping.

🔧

Multiport USB-C Adapter

A compact multiport USB-C adapter can use the TUSB1146RNQR to distribute high-speed traffic between a Type-C receptacle and downstream ports while compensating for board-level channel loss. The device’s support for 10 Gbps USB 3.2 and DisplayPort alternate modes makes it useful where one connector must serve both data and video functions. Adaptive equalization is particularly valuable when the adapter PCB includes connector launches, routing transitions, or limited escape space. The 40-pin WQFN footprint supports compact placement, but thermal design and high-speed layout remain essential. Confirm lane allocation, return paths, supply requirements, and exposed-pad assembly guidance in the Texas Instruments datasheet before production release.

🎥

USB-C Video Capture System

The TUSB1146RNQR can support USB-C video-capture equipment that receives high-speed alternate-mode traffic from a host computer and routes it toward downstream processing electronics. At 10 Gbps, connector and PCB loss can materially affect eye quality, making the redriver’s adaptive equalization functionally important. USB 3.2 Gen 1/Gen 2 compatibility also permits the same device family to support data-oriented links when the selected configuration permits. Designers should keep the redriver close to the loss source, maintain closely coupled differential pairs, avoid stubs, and validate the complete channel against the applicable USB or DisplayPort requirements. Pin-level signal assignment must be verified against the selected capture architecture.

🏭

Industrial USB-C Control Panel

The TUSB1146RNQR can serve in an industrial USB-C control panel that combines device connectivity, configuration data, and display or camera traffic over a Type-C interface. Its 10 Gbps capability provides margin for USB 3.2 Gen 2 and DisplayPort 2.0 links, while adaptive equalization helps maintain signal quality across internal board routing. The 0 °C to 70 °C operating range of the RNQR ordering code suits many commercial industrial environments, although the complete enclosure, cable, and connector system must be evaluated separately. Place bypass capacitors close to supply pins, maintain a solid ground reference, and follow the recommended package land pattern. The control system should also support power-role and alternate-mode configuration expected by the chosen Type-C controller.

📱

Tablet and Portable Accessory Interface

The TUSB1146RNQR is useful in a tablet accessory or portable interface assembly where a USB Type-C receptacle feeds high-speed data to an internal controller or display subsystem. USB 3.2 operation up to 10 Gbps supports demanding data transfers, while DisplayPort 2.0 support enables high-bandwidth video where the accessory implements that alternate mode. Adaptive equalization helps overcome loss introduced by connector launches and space-constrained routing in portable products. The WQFN package requires careful solder-joint inspection and exposed-pad assembly per the manufacturer’s land pattern. Designers should use short differential routes, maintain impedance, and verify the selected D_DFP assignment and lane mapping before committing the board layout.

What is the TUSB1146RNQR?
The TUSB1146RNQR is a Texas Instruments USB Type-C crosspoint switch and protocol-agnostic linear redriver for high-speed USB and DisplayPort alternate modes. It supports USB 3.2 data rates up to 10 Gbps, VESA DisplayPort 2.0 up to 10 Gbps, and adaptive equalization. The device is packaged in a 40-pin WQFN package measuring 6 mm by 4 mm, according to the Texas Instruments product page.
What data rates does the TUSB1146RNQR support?
The TUSB1146RNQR supports USB 3.2 Gen 1 and Gen 2 signaling up to 10 Gbps and DisplayPort 2.0 UHBR10 signaling up to 10 Gbps. It can operate with either two or four DisplayPort lanes and supports D_DFP pin assignments C, D, and E. Texas Instruments identifies the device as a USB Type-C alternate-mode redriver/MUX with adaptive equalization.
Where can I download the TUSB1146RNQR datasheet PDF?
The official TUSB1146 product page on Texas Instruments provides access to the TUSB1146 documentation, including the manufacturer datasheet and ordering information. Use the official TUSB1146 page linked in the datasheet field for the current document revision. The TUSB1146RNQR ordering entry confirms the RNQ package, 40 pins, and the 0 °C to 70 °C temperature range.
Where can I find the TUSB1146RNQR pinout?
Use the pin-description table and package drawing in the Texas Instruments TUSB1146 manufacturer datasheet to assign PCB tracks for the 40-pin RNQ package. The public ordering information confirms that TUSB1146RNQR uses a 40-pin WQFN package, but a complete numbered pin list is not reproduced on this page. Confirm every signal, supply, ground, and exposed-pad connection against the current datasheet before fabrication.
Is the TUSB1146RNQR suitable for USB-C docking stations?
Yes, the TUSB1146RNQR is suitable for USB-C docking stations that require USB 3.2 or DisplayPort alternate-mode signal routing and regeneration. Its support for 10 Gbps USB, DisplayPort 2.0, two-lane and four-lane DisplayPort configurations, and adaptive equalization addresses the loss and routing challenges common in dense docks. Final suitability depends on connector choice, lane routing, trace impedance, and thermal performance.
What does adaptive equalization do in the TUSB1146RNQR?
Adaptive equalization in the TUSB1146RNQR compensates for high-speed channel loss encountered between the USB Type-C interface and downstream circuitry. This can improve signal integrity when connector launches, PCB routing, cables, or board-to-board transitions reduce eye opening. Texas Instruments identifies adaptive EQ as a defining feature, while the detailed implementation and configuration limits should be confirmed in the manufacturer datasheet.
Can the TUSB1146RNQR support HDMI Alternate Mode?
Yes, the protocol-agnostic linear-redriver architecture allows the TUSB1146 family to support USB Type-C alternate-mode interfaces other than DisplayPort, including HDMI Alternate Mode. Actual operation still depends on the selected lane assignment, signal-routing configuration, connector implementation, and electrical characteristics of the design. Use the Texas Instruments application guidance for the intended alternate mode.
What is the difference between USB redriving and a repeater function?
The TUSB1146RNQR uses a linear redriver to regenerate received high-speed signals and apply equalization while preserving the original data stream. It also provides crosspoint-switch and MUX functions for routing USB Type-C alternate-mode lanes. Unlike a protocol-converting retimer, a linear redriver does not require the full protocol to be recovered and retransmitted; the exact signal paths must be confirmed from the datasheet.
When should I choose the TUSB1146RNQR for a USB-C design?
Choose the TUSB1146RNQR when the design needs a USB Type-C redriver/MUX supporting USB 3.2 up to 10 Gbps and DisplayPort alternate modes in a 40-pin WQFN package. It is particularly relevant when adaptive equalization, two-lane or four-lane DisplayPort routing, and protocol-agnostic alternate-mode support are required. It is less suitable when a simpler switch, a protocol converter, or a different package footprint is the primary design constraint.
What can replace the TUSB1146RNQR?
A valid replacement must match the 40-pin RNQ footprint, pin functions, electrical limits, USB and DisplayPort lane support, and intended alternate-mode routing. No verified same-footprint substitute is established for this part, so a broader functional redriver should not be treated as a drop-in replacement without a manufacturer-approved pin and application comparison. The Request a Quote form on this page can be used to ask about exact-MPN sourcing and lead time.
TUSB1146RNQR vs. a generic USB-C redriver: which is better?
The TUSB1146RNQR is the more specifically integrated choice when a design requires USB 3.2 up to 10 Gbps, DisplayPort 2.0 up to 10 Gbps, adaptive equalization, and support for multiple D_DFP assignments in one 40-pin WQFN device. A generic redriver may handle USB alone but may not provide the required DisplayPort routing, lane flexibility, or footprint. Compare the complete pin map and application circuit rather than relying on the redriver label alone.
Is the TUSB1146RNQR a direct replacement for TUSB1142 or TUSB1144?
The TUSB1146RNQR should not be treated as a direct drop-in replacement for TUSB1142 or TUSB1144 without a formal pin-compatibility review. Although all are USB Type-C redrivers in the same product family, they may differ in supported lane counts, alternate modes, control functions, and package details. Verify the RNQ footprint, pin assignments, strap configuration, signal paths, and application circuit before approving a substitution.
What is the operating temperature range of TUSB1146RNQR?
The TUSB1146RNQR commercial-temperature ordering entry specifies an operating range from 0 °C to 70 °C. Texas Instruments also lists 40 pins and the RNQ WQFN package for this exact ordering code. This range applies to the RNQR variant, so it should not be assumed for other package or temperature-grade options in the TUSB1146 family.
How should a PCB be laid out for the TUSB1146RNQR?
Route the 10 Gbps differential pairs as short, tightly coupled, continuously referenced traces with controlled impedance, while minimizing vias, stubs, and discontinuities. Place power bypass components close to the relevant supply pins, preserve the ground reference beneath high-speed pairs, and connect the exposed pad according to the Texas Instruments package guidance. Validate the final stack-up and signal paths with the manufacturer’s layout recommendations and channel-loss analysis.
How do I request a quote and current lead time for TUSB1146RNQR?
Use the Request a Quote form on this page to request current availability, lead time, and order details for TUSB1146RNQR. Quote requests should identify the 40-pin RNQ package, the required commercial temperature range of 0 °C to 70 °C, and any quantity-break or traceability requirements. The form is the appropriate route for a current sourcing response without relying on a static or outdated price.

Mühendislik referans verileri: TUSB1146RNQR — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the TUSB1146RNQR when a USB-C system needs combined high-speed routing and signal regeneration, including USB 3.2 Gen 1 or Gen 2 operation up to 10 Gbps and DisplayPort 2.0 up to 10 Gbps. It is especially suitable when adaptive equalization, two-lane or four-lane DisplayPort operation, and support for D_DFP assignments C, D, and E are required. Use a simpler USB-only redriver when the design has no DisplayPort or other alternate-mode routing needs. Use a protocol-converting solution when the system requires conversion between incompatible protocols rather than linear redrive and lane routing. Do not choose a replacement solely by its advertised data rate: verify the RNQ footprint, all 40 package connections, control inputs, lane assignments, equalization behavior, power requirements, and exposed-pad implementation. When the existing PCB was designed specifically for the TUSB1146RNQR, retaining this device is generally the lowest-risk choice because its integrated USB and DisplayPort functions reduce routing complexity.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün
Product Type USB Type-C crosspoint switch, redriver, and MUX
Brand Texas Instruments
Package 40-pin WQFN (RNQ), 6 mm x 4 mm
Maximum USB Data Rate 10 Gbps
USB Standard USB 3.2 Gen 1 and Gen 2
DisplayPort Standard VESA DisplayPort 2.0
Maximum DisplayPort Data Rate 10 Gbps (UHBR10)
Supported DisplayPort Lane Configuration 2 DisplayPort lanes or 4 DisplayPort lanes
Equalization Adaptive equalization
D_DFP Pin Assignments C, D, and E
Operating Temperature Range 0 °C to 70 °C

Ana Farklılayıcılar

  • Combines 10 Gbps USB and DisplayPort routing in one Type-C redriver/MUX (karşılaştırma:Generic USB-only redriver)
  • Supports two-lane and four-lane DisplayPort configurations (karşılaştırma:Single-lane redriver)
  • Protocol-agnostic alternate-mode signal conditioning (karşılaştırma:DisplayPort-specific redriver)

Tasarım Notları

Treat every USB 3.2 and DisplayPort route as a controlled-impedance differential channel. Keep pair spacing and reference geometry consistent through the connector launch, redriver pins, and downstream destination; minimize vias, stubs, and impedance discontinuities. A continuous ground reference is especially important because loss and return-path discontinuities can degrade the eye even when the nominal trace length appears acceptable.

Use the adaptive-equalization capability as part of a complete channel design rather than as a substitute for good layout. Evaluate connector, cable, breakout, and PCB losses together, and confirm the supported equalization mode and configuration with the manufacturer application information. For DisplayPort alternate mode, validate the selected D_DFP assignment and the two-lane versus four-lane routing used by the product.

Follow the RNQ exposed-pad land pattern and soldering guidance exactly. The package’s exposed pad normally requires an uninterrupted ground connection and controlled solder fill for thermal and electrical performance. Review the assembly process to avoid excessive solder on fine-pitch leads while maintaining adequate pad coverage, and account for package heating from sustained high-speed activity within the product’s stated operating range.

Do not substitute a generic USB redriver solely because its maximum data rate reaches 10 Gbps. USB data, two-lane DisplayPort, four-lane DisplayPort, and D_DFP assignments create different routing requirements. Before a board respin, compare the complete RNQ pin map, control straps, supply requirements, lane paths, equalization behavior, and exposed-pad layout against the TUSB1146RNQR application circuit.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The ordering information confirms the commercial 0 °C to 70 °C temperature range. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.

Veri doğrulanma tarihi: 2026-11-16 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

TUSB1146RNQR datasheet TUSB1146RNQR pinout TUSB1146RNQR datasheet pdf TUSB1146RNQR equivalent TUSB1146RNQR replacement TUSB1146RNQR cross reference TUSB1146RNQR footprint TUSB1146RNQR application circuit Texas Instruments TUSB1146RNQR TUSB1146RNQR 10Gbps redriver TUSB1146RNQR USB-C dock TUSB1146RNQR price TUSB1146RNQR stock TUSB1146RNQR vs TUSB1142 TUSB1146RNQR vs TUSB1144

İlgili Bileşenler ve Terimler

Texas Instruments TUSB1146RNQR TUSB1146 USB Type-C USB 3.2 USB 3.2 Gen 1 USB 3.2 Gen 2 DisplayPort 2.0 UHBR10 D_DFP adaptive equalization linear redriver crosspoint switch USB interface IC signal conditioner 40-pin WQFN RNQ package surface-mount semiconductor USB-C docking station monitor dock HDMI Alternate Mode differential-pair routing controlled impedance continuous reference plane exposed pad
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle