TUSB1146RNQR - 10Gbps USB-C Redriver/MUX | Texas Instruments
MPN: TUSB1146RNQR ✓ פעילTUSB1146RNQR סקירה
A USB Type-C alternate-mode redriver/MUX is an interface IC that routes high-speed signals between a USB Type-C connector and downstream or host circuitry while compensating for channel loss. It belongs to the signal-conditioning hierarchy of USB interface controllers, redrivers, repeaters, crosspoint switches, and interface ICs. By regenerating and equalizing marginal signals, the TUSB1146 supports reliable high-speed links over longer traces, connectors, cables, or board-to-board transitions than might be possible with passive routing alone.
The TUSB1146 supports USB 3.2 Gen 1 and Gen 2 operation up to 10 Gbps, two-lane and four-lane DisplayPort configurations, and DisplayPort 2.0 UHBR10 signaling up to 10 Gbps. Its adaptive equalization adapts the receive equalization to the connected channel. The protocol-agnostic architecture also allows the device to support non-DisplayPort USB Type-C alternate modes such as HDMI Alternate Mode.
In a downstream-facing host port, the TUSB1146 functions as a linear redriver for selected USB Type-C SuperSpeed and DisplayPort lanes. Adaptive equalization helps restore signal margin when connector or PCB losses reduce eye opening. The linear redriver architecture is particularly useful where designers need signal regeneration without introducing a protocol-specific conversion stage between the Type-C port and the downstream interface.
Typical uses include USB-C docking stations, laptop and tablet docks, multiport adapters, monitor docks, video-capture systems, and industrial USB-C equipment. The D_DFP C, D, and E assignments broaden compatibility with DisplayPort Alternate Mode routing requirements. Systems requiring additional lane routing, conversion, or protocol features should confirm the complete pin configuration and application circuit in the manufacturer datasheet before layout release.
Layout is critical in a 10 Gbps redriver design. Route the high-speed differential pairs as controlled-impedance, tightly coupled traces with minimal stubs and continuous reference planes. Place bypass capacitors close to the supply pins, keep the exposed pad thermally and electrically connected as specified, and follow the manufacturer’s recommended layer transitions and return-path guidance to minimize differential-mode and common-mode conversion.
This product page combines interface classification, application guidance, design cautions, and structured comparison fields to support faster engineering review. It also separates confirmed TUSB1146RNQR characteristics from parameters that still require inspection of the manufacturer datasheet, helping designers avoid assuming unsupported pin, electrical, or compliance details.
חלופות תחליף ישיר עבור TUSB1146RNQR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותTUSB1146RNQR מפרטים
| Product Type | USB Type-C crosspoint switch, redriver, and MUX |
| Maximum USB Data Rate | 10 Gbps |
| USB Standard | USB 3.2 Gen 1 and Gen 2 |
| DisplayPort Standard | VESA DisplayPort 2.0 |
| Maximum DisplayPort Data Rate | 10 Gbps (UHBR10) |
| Supported DisplayPort Lane Configuration | 2 DisplayPort lanes or 4 DisplayPort lanes |
| Equalization | Adaptive equalization |
| Supported D_DFP Pin Assignments | C, D, and E |
| Alternate-Mode Architecture | Protocol-agnostic linear redriver |
| Additional Alternate-Mode Support | HDMI Alternate Mode |
| מארז | 40-pin WQFN (RNQ), 6 mm x 4 mm |
| מספר פינים | 40 pins |
| סוג הרכבה | Surface mount |
| טווח טמפרטורת פעולה | 0 °C to 70 °C |
מדריך תצורת פינים של TUSB1146RNQR 40-pin wqfn (rnq), 6 mm x 4 mm
תצורת פינים עבור TUSB1146RNQR (מארזת 40-pin wqfn (rnq), 6 mm x 4 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור TUSB1146RNQR.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
TUSB1146RNQR מתאים עבור 6 יישוםs: USB-C Laptop Docking Station, DisplayPort USB-C Monitor Dock, Multiport USB-C Adapter, USB-C Video Capture System, Industrial USB-C Control Panel, Tablet and Portable Accessory Interface.
USB-C Laptop Docking Station
The TUSB1146RNQR fits a USB-C docking station that must route high-speed SuperSpeed and DisplayPort traffic through a compact connector, internal PCB transitions, and downstream interfaces. Its support for USB 3.2 Gen 1 and Gen 2 up to 10 Gbps, together with adaptive equalization, provides signal regeneration when connector and trace losses reduce link margin. The 40-pin WQFN package also keeps the active device reasonably compact for a dense dock PCB. In implementation, use controlled-impedance differential routing, continuous reference planes, and the manufacturer’s recommended application circuit. Verify the complete lane and D_DFP assignment before routing because the supported C, D, and E assignments affect which signals reach each downstream port.
מומלץ
DisplayPort USB-C Monitor Dock
The TUSB1146RNQR is appropriate for a monitor dock that carries both USB data and video over USB Type-C. It supports VESA DisplayPort 2.0 up to 10 Gbps through UHBR10 signaling and can support either two or four DisplayPort lanes, enabling lane-allocation flexibility around the Type-C connector. Adaptive equalization helps preserve signal integrity through connector launches and internal routing. A practical design should select the required D_DFP assignment, maintain differential impedance, minimize branch stubs, and provide a continuous ground reference. Because this is a protocol-agnostic linear redriver, the surrounding circuit must still implement the intended downstream DisplayPort interface and required lane mapping.
מומלץ
Multiport USB-C Adapter
A compact multiport USB-C adapter can use the TUSB1146RNQR to distribute high-speed traffic between a Type-C receptacle and downstream ports while compensating for board-level channel loss. The device’s support for 10 Gbps USB 3.2 and DisplayPort alternate modes makes it useful where one connector must serve both data and video functions. Adaptive equalization is particularly valuable when the adapter PCB includes connector launches, routing transitions, or limited escape space. The 40-pin WQFN footprint supports compact placement, but thermal design and high-speed layout remain essential. Confirm lane allocation, return paths, supply requirements, and exposed-pad assembly guidance in the Texas Instruments datasheet before production release.
מומלץ
USB-C Video Capture System
The TUSB1146RNQR can support USB-C video-capture equipment that receives high-speed alternate-mode traffic from a host computer and routes it toward downstream processing electronics. At 10 Gbps, connector and PCB loss can materially affect eye quality, making the redriver’s adaptive equalization functionally important. USB 3.2 Gen 1/Gen 2 compatibility also permits the same device family to support data-oriented links when the selected configuration permits. Designers should keep the redriver close to the loss source, maintain closely coupled differential pairs, avoid stubs, and validate the complete channel against the applicable USB or DisplayPort requirements. Pin-level signal assignment must be verified against the selected capture architecture.
מומלץ
Industrial USB-C Control Panel
The TUSB1146RNQR can serve in an industrial USB-C control panel that combines device connectivity, configuration data, and display or camera traffic over a Type-C interface. Its 10 Gbps capability provides margin for USB 3.2 Gen 2 and DisplayPort 2.0 links, while adaptive equalization helps maintain signal quality across internal board routing. The 0 °C to 70 °C operating range of the RNQR ordering code suits many commercial industrial environments, although the complete enclosure, cable, and connector system must be evaluated separately. Place bypass capacitors close to supply pins, maintain a solid ground reference, and follow the recommended package land pattern. The control system should also support power-role and alternate-mode configuration expected by the chosen Type-C controller.
מומלץ
Tablet and Portable Accessory Interface
The TUSB1146RNQR is useful in a tablet accessory or portable interface assembly where a USB Type-C receptacle feeds high-speed data to an internal controller or display subsystem. USB 3.2 operation up to 10 Gbps supports demanding data transfers, while DisplayPort 2.0 support enables high-bandwidth video where the accessory implements that alternate mode. Adaptive equalization helps overcome loss introduced by connector launches and space-constrained routing in portable products. The WQFN package requires careful solder-joint inspection and exposed-pad assembly per the manufacturer’s land pattern. Designers should use short differential routes, maintain impedance, and verify the selected D_DFP assignment and lane mapping before committing the board layout.
מומלץ
נתוני עזר הנדסיים עבור TUSB1146RNQR — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה |
|---|---|
| Product Type | USB Type-C crosspoint switch, redriver, and MUX |
| Brand | Texas Instruments |
| Package | 40-pin WQFN (RNQ), 6 mm x 4 mm |
| Maximum USB Data Rate | 10 Gbps |
| USB Standard | USB 3.2 Gen 1 and Gen 2 |
| DisplayPort Standard | VESA DisplayPort 2.0 |
| Maximum DisplayPort Data Rate | 10 Gbps (UHBR10) |
| Supported DisplayPort Lane Configuration | 2 DisplayPort lanes or 4 DisplayPort lanes |
| Equalization | Adaptive equalization |
| D_DFP Pin Assignments | C, D, and E |
| Operating Temperature Range | 0 °C to 70 °C |
מבדילים עיקריים
- Combines 10 Gbps USB and DisplayPort routing in one Type-C redriver/MUX (לעומתGeneric USB-only redriver)
- Supports two-lane and four-lane DisplayPort configurations (לעומתSingle-lane redriver)
- Protocol-agnostic alternate-mode signal conditioning (לעומתDisplayPort-specific redriver)
הערות תכנון
Treat every USB 3.2 and DisplayPort route as a controlled-impedance differential channel. Keep pair spacing and reference geometry consistent through the connector launch, redriver pins, and downstream destination; minimize vias, stubs, and impedance discontinuities. A continuous ground reference is especially important because loss and return-path discontinuities can degrade the eye even when the nominal trace length appears acceptable.
Use the adaptive-equalization capability as part of a complete channel design rather than as a substitute for good layout. Evaluate connector, cable, breakout, and PCB losses together, and confirm the supported equalization mode and configuration with the manufacturer application information. For DisplayPort alternate mode, validate the selected D_DFP assignment and the two-lane versus four-lane routing used by the product.
Follow the RNQ exposed-pad land pattern and soldering guidance exactly. The package’s exposed pad normally requires an uninterrupted ground connection and controlled solder fill for thermal and electrical performance. Review the assembly process to avoid excessive solder on fine-pitch leads while maintaining adequate pad coverage, and account for package heating from sustained high-speed activity within the product’s stated operating range.
Do not substitute a generic USB redriver solely because its maximum data rate reaches 10 Gbps. USB data, two-lane DisplayPort, four-lane DisplayPort, and D_DFP assignments create different routing requirements. Before a board respin, compare the complete RNQ pin map, control straps, supply requirements, lane paths, equalization behavior, and exposed-pad layout against the TUSB1146RNQR application circuit.
מידע על תאימות
The ordering information confirms the commercial 0 °C to 70 °C temperature range. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.