TUSB8043RGCR - 4-Port 5Gbps USB 3.1 Hub | Texas Instruments
MPN: TUSB8043RGCR ✓ AktifTUSB8043RGCR Genel Bakış
A USB hub controller is a semiconductor that manages traffic between a host USB port and multiple downstream ports. The TUSB8043 belongs to the hierarchy of USB interface controllers, interface ICs, and integrated circuits. Its SuperSpeed capability follows the USB 3.1 Gen1 data-rate ceiling of 5.0 Gbps, while its HID-to-I2C bridge enables configuration information to be transferred between a USB host and an attached I2C EEPROM.
The principal features are four downstream hub ports, USB 3.1 Gen1 operation at 5.0 Gbps, USB 1.1 and USB 2.0 backward-compatible interface support, an internal USB HID-to-I2C bridge, and support for programming an attached EEPROM. The commercial TUSB8043RGCR version is specified for an operating-temperature range of 0°C to 70°C and uses a 64-pin RGC package.
Technically, the device consolidates hub-control and configuration functions into one controller. The HID interface provides a standardized host-access path, while the I2C interface connects the controller to an external configuration memory device. This architecture reduces the need for separate host-controlled configuration logic and supports designs where hub identification or nonvolatile configuration must be stored in EEPROM. The 9 x 9 mm VQFN package also supports compact desktop, industrial, and embedded USB hub implementations.
Typical applications include four-port USB docking stations, industrial USB hubs, embedded host systems, test and measurement equipment, and USB peripheral expansion. The device is particularly suitable when one USB connection must support several downstream peripherals while maintaining a configurable SuperSpeed hub. The associated crystal-selection guidance for USB 2.0 devices is identified by Texas Instruments application note SLLA122.
PCB implementation should preserve short high-speed USB traces, provide continuous return-path references, place the crystal and supporting components close to the controller, and follow the manufacturer’s recommended power and decoupling layout. Keep copper away from the exposed-pad region where electrical isolation is required, and use the exposed pad as a thermal and low-inductance ground connection when the package drawing directs it.
This page organizes the verified product identity, package, interface, ordering, pricing, and sourcing information for the TUSB8043RGCR and adds application guidance, design considerations, and engineering-oriented comparisons. Use the manufacturer datasheet and pin-description table when assigning all 64 package connections and when validating the final USB, power, EEPROM, and clock implementation.
Drop-in alternatifler için TUSB8043RGCR — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller TUSB8043RGCR (aynı form faktörü ve ayağa oturma) — farklı olan Configuration Interface, Number of Downstream Ports, Operating Temperature Range, Package, Product Type.
TUSB8043AIRGCR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
TUSB8043ARGCR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
TUSB8043RGCT
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →TUSB8043RGCR
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →TUSB8043IRGCR
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
TUSB8043RGCR Özellikler
| Product Type | 4-port USB 3.1 hub controller |
| Number of Downstream Ports | 4 ports |
| Maximum SuperSpeed Data Rate | 5.0 Gbps |
| USB Standard | USB 3.1 Gen1 |
| Backward-Compatible USB Support | USB 1.1 and USB 2.0 |
| Configuration Interface | USB HID to I2C |
| External Memory Support | Programming of an attached EEPROM |
| İşletim Sıcaklığı Aralığı | 0°C to 70°C |
| Paket | 64-pin RGC VQFN, 9 x 9 mm |
| Montaj Türü | Surface mount |
| Number of Package Pins | 64 pins |
| Crystal Selection Guidance | Texas Instruments application note SLLA122 |
TUSB8043RGCR 64 pins Pin Yapısı Kılavuzu
TUSB8043RGCR (64 pins paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: TUSB8043RGCR.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
TUSB8043RGCR için uygundur 6 uygulamas: Four-Port USB Docking Station, Industrial USB Hub, Embedded USB Peripheral Expansion, Test and Measurement Equipment, USB Storage and Media Hub, Desktop USB Expansion.
Four-Port USB Docking Station
The TUSB8043RGCR fits a docking station that must expand one host connection into four downstream USB ports. Its four-port SuperSpeed hub architecture supports up to 5.0 Gbps per USB 3.1 Gen1 link while retaining USB 2.0 and USB 1.1 compatibility for slower peripherals. Place the controller between the upstream host connector and downstream port controllers, and provide the recommended clock and decoupling network. The HID-to-I2C bridge can also support EEPROM programming for hub configuration, reducing separate control hardware. Final channel compliance must be validated with the USB logo test requirements applicable to the complete product, including connector, cable, power, and routing behavior.
Önerilen
Industrial USB Hub
The TUSB8043RGCR is useful in an industrial USB hub where several service peripherals share one host port. Four downstream ports reduce connector demand, while 5.0 Gbps SuperSpeed operation supports storage, data acquisition, and configuration devices that benefit from higher transfer rates. USB 2.0 and USB 1.1 compatibility allows the same hub to serve legacy equipment. Because the commercial device is specified for 0°C to 70°C, the enclosure temperature and internal heating must remain inside that range. Industrial implementations should also include connector overvoltage protection, ESD strategy, robust grounding, and validated separation between sensitive analog or safety-related circuitry and high-speed USB routes.
Önerilen
Embedded USB Peripheral Expansion
The TUSB8043RGCR can expand USB connectivity in an embedded host without allocating four host-controller ports. The controller manages one upstream connection and four downstream USB hub paths, providing a practical bridge between embedded processors and external peripherals. Its internal USB HID-to-I2C interface allows a host to reach an attached configuration EEPROM, which can simplify implementation of programmable hub identity or device settings. PCB planning should keep SuperSpeed pairs short and impedance-controlled, provide an uninterrupted ground reference beneath each pair, and place the clock network close to the controller. Firmware must enumerate the hub correctly and manage power states according to the device programming requirements in the manufacturer datasheet.
Önerilen
Test and Measurement Equipment
The TUSB8043RGCR fits test equipment that needs several USB instruments or storage devices connected through one control port. Four downstream ports simplify workstation integration, while SuperSpeed operation up to 5.0 Gbps supports high-throughput capture or logging devices. The HID-to-I2C configuration function can make a connected EEPROM available to the USB host, reducing the need for a separate programming path when hub-specific nonvolatile settings are required. For laboratory equipment, pay particular attention to ground-loop prevention, chassis and signal-ground topology, ESD protection at externally accessible connectors, and USB trace routing away from noisy power-conversion stages. Qualification should include the intended combination of downstream devices and cables.
Önerilen
USB Storage and Media Hub
The TUSB8043RGCR can support a compact hub for USB storage, card readers, and media peripherals. Four downstream ports give users a single connection point, and USB 3.1 Gen1 operation up to 5.0 Gbps provides the link rate needed for bursty storage transfers. Legacy USB 2.0 and USB 1.1 devices remain supported, allowing older peripherals to share the hub. The design must account for simultaneous enumeration and power-demand scenarios because controller bandwidth and system power are separate constraints. Use connector power protection, compliant power switching where required, solid return paths, and short USB routes. Final thermal and electrical performance should be evaluated with the maximum intended peripheral population.
Önerilen
Desktop USB Expansion
The TUSB8043RGCR is appropriate for desktop accessories that add four USB connections without requiring a separate host controller for each peripheral. The compact 9 x 9 mm, 64-pin RGC VQFN package leaves room for routing around the controller, and the four-port architecture supports a mixture of high-speed and legacy devices. The HID-to-I2C path can support EEPROM programming when the hub must retain configuration. Practical implementation requires careful exposed-pad grounding, placement of decoupling capacitors, clock-component placement near the relevant pins, and controlled impedance on USB differential pairs. Validate the complete design with target peripheral combinations because system-generated USB traffic, connector behavior, and cable compatibility affect the final user experience.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: TUSB8043RGCR — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | TUSB8043AIRGCR | TUSB8043ARGCR | TUSB8043RGCT | TUSB8043IRGCR |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 64-pin RGC VQFN (9 x 9 mm) | 64-pin RGC VQFN (9 x 9 mm) | 64-pin RGC VQFN (9 x 9 mm) | 64-pin RGC VQFN (9 x 9 mm) | 64-pin RGC VQFN (9 x 9 mm) |
| Number of Downstream Ports | 4 ports | 4 ports | 4 ports | 4 ports | 4 ports |
| Maximum SuperSpeed Data Rate | 5.0 Gbps | 5.0 Gbps | 5.0 Gbps | 5.0 Gbps | 5.0 Gbps |
| USB Interface Support | USB 3.1, USB 2.0, USB 1.1 | USB 3.1, USB 2.0, USB 1.1 | USB 3.1, USB 2.0, USB 1.1 | USB 3.1, USB 2.0, USB 1.1 | USB 3.1, USB 2.0, USB 1.1 |
| Configuration Interface | USB HID to I2C | USB HID to I2C | USB HID to I2C | USB HID to I2C | USB HID to I2C |
| EEPROM Programming Support | Yes | Yes | Yes | Yes | Yes |
Ana Farklılayıcılar
- Four SuperSpeed hub ports in one controller (karşılaştırma:TUSB8043RGCT)
- Integrated HID-to-I2C configuration path (karşılaştırma:TUSB8043AIRGCR)
- Four-port integration reduces external hub-controller count (karşılaştırma:TUSB8043ARGCR)
Tasarım Notları
Route USB differential pairs as controlled-impedance, tightly coupled traces with a continuous reference plane beneath them. Avoid vias where practical, minimize stubs, and keep the pairs away from clocks, switching inductors, and switching-node copper. The manufacturer layout guidance and the pin-description table should govern connector, controller, and protection-device placement because signal-order constraints are device specific.
Place all decoupling capacitors as close as practical to their associated power and ground pins, with short ground paths and no plane splits beneath the controller region. Treat the exposed pad as both a thermal surface and an electrical connection according to the package drawing. A continuous ground reference and carefully arranged thermal-via pattern help reduce inductance and improve heat transfer without compromising USB signal integrity.
Do not select a replacement solely because it uses a 64-pin VQFN. Confirm the RGC pin assignments, exposed-pad treatment, USB trace order, clock connection, EEPROM interface, operating-temperature grade, and device configuration for every proposed substitute. The TUSB8043 family includes multiple ordering and temperature-grade suffixes, so the final schematic and PCB review should use the exact manufacturer datasheet for the selected MPN.
Design the USB power path for the combined startup and operating demand of all intended peripherals, not only the controller. Apply the USB connector and overvoltage requirements, account for inrush behavior, and keep switching regulators away from sensitive USB pairs and the reference crystal. Confirm supply sequencing, decoupling, and exposed-pad thermal performance using the manufacturer electrical characteristics and the final enclosure environment.
Follow Texas Instruments application note SLLA122 when selecting the USB clock crystal and associated load-capacitance network. Place the crystal and load capacitors close to the controller, keep the clock path away from noisy sources, and avoid long ground returns through the crystal circuit. Validate clock amplitude, jitter, startup behavior, and high-speed USB eye performance on the finished PCB rather than relying on schematic connectivity alone.
Uyumluluk Bilgisi
The commercial TUSB8043RGCR is not identified as an automotive-qualified device in the verified product information. Detailed environmental, RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations must be confirmed on the manufacturer product page or declarations for the exact ordering suffix.