TUSB8043RGCR - 4-Port 5Gbps USB 3.1 Hub | Texas Instruments
MPN: TUSB8043RGCR ✓ Hoạt độngTUSB8043RGCR Tóm tắt
A USB hub controller is a semiconductor that manages traffic between a host USB port and multiple downstream ports. The TUSB8043 belongs to the hierarchy of USB interface controllers, interface ICs, and integrated circuits. Its SuperSpeed capability follows the USB 3.1 Gen1 data-rate ceiling of 5.0 Gbps, while its HID-to-I2C bridge enables configuration information to be transferred between a USB host and an attached I2C EEPROM.
The principal features are four downstream hub ports, USB 3.1 Gen1 operation at 5.0 Gbps, USB 1.1 and USB 2.0 backward-compatible interface support, an internal USB HID-to-I2C bridge, and support for programming an attached EEPROM. The commercial TUSB8043RGCR version is specified for an operating-temperature range of 0°C to 70°C and uses a 64-pin RGC package.
Technically, the device consolidates hub-control and configuration functions into one controller. The HID interface provides a standardized host-access path, while the I2C interface connects the controller to an external configuration memory device. This architecture reduces the need for separate host-controlled configuration logic and supports designs where hub identification or nonvolatile configuration must be stored in EEPROM. The 9 x 9 mm VQFN package also supports compact desktop, industrial, and embedded USB hub implementations.
Typical applications include four-port USB docking stations, industrial USB hubs, embedded host systems, test and measurement equipment, and USB peripheral expansion. The device is particularly suitable when one USB connection must support several downstream peripherals while maintaining a configurable SuperSpeed hub. The associated crystal-selection guidance for USB 2.0 devices is identified by Texas Instruments application note SLLA122.
PCB implementation should preserve short high-speed USB traces, provide continuous return-path references, place the crystal and supporting components close to the controller, and follow the manufacturer’s recommended power and decoupling layout. Keep copper away from the exposed-pad region where electrical isolation is required, and use the exposed pad as a thermal and low-inductance ground connection when the package drawing directs it.
This page organizes the verified product identity, package, interface, ordering, pricing, and sourcing information for the TUSB8043RGCR and adds application guidance, design considerations, and engineering-oriented comparisons. Use the manufacturer datasheet and pin-description table when assigning all 64 package connections and when validating the final USB, power, EEPROM, and clock implementation.
Bộ thay thế dễ dàng lắp đặt cho TUSB8043RGCR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TUSB8043RGCR (cùng hình factor và footprint) — khác nhau ở Configuration Interface, Number of Downstream Ports, Operating Temperature Range, Package, Product Type.
TUSB8043AIRGCR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TUSB8043ARGCR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TUSB8043RGCT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →TUSB8043RGCR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →TUSB8043IRGCR
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TUSB8043RGCR Thông số kỹ thuật
| Product Type | 4-port USB 3.1 hub controller |
| Number of Downstream Ports | 4 ports |
| Maximum SuperSpeed Data Rate | 5.0 Gbps |
| USB Standard | USB 3.1 Gen1 |
| Backward-Compatible USB Support | USB 1.1 and USB 2.0 |
| Configuration Interface | USB HID to I2C |
| External Memory Support | Programming of an attached EEPROM |
| Khoảng nhiệt độ hoạt động | 0°C to 70°C |
| Hộp | 64-pin RGC VQFN, 9 x 9 mm |
| Kiểu lắp đặt | Surface mount |
| Number of Package Pins | 64 pins |
| Crystal Selection Guidance | Texas Instruments application note SLLA122 |
Hướng dẫn cấu hình chân TUSB8043RGCR 64 pins
Cấu hình chân cho TUSB8043RGCR (64 pins gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho TUSB8043RGCR.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TUSB8043RGCR phù hợp cho 6 Áp dụngs: Four-Port USB Docking Station, Industrial USB Hub, Embedded USB Peripheral Expansion, Test and Measurement Equipment, USB Storage and Media Hub, Desktop USB Expansion.
Four-Port USB Docking Station
The TUSB8043RGCR fits a docking station that must expand one host connection into four downstream USB ports. Its four-port SuperSpeed hub architecture supports up to 5.0 Gbps per USB 3.1 Gen1 link while retaining USB 2.0 and USB 1.1 compatibility for slower peripherals. Place the controller between the upstream host connector and downstream port controllers, and provide the recommended clock and decoupling network. The HID-to-I2C bridge can also support EEPROM programming for hub configuration, reducing separate control hardware. Final channel compliance must be validated with the USB logo test requirements applicable to the complete product, including connector, cable, power, and routing behavior.
Được đề xuất
Industrial USB Hub
The TUSB8043RGCR is useful in an industrial USB hub where several service peripherals share one host port. Four downstream ports reduce connector demand, while 5.0 Gbps SuperSpeed operation supports storage, data acquisition, and configuration devices that benefit from higher transfer rates. USB 2.0 and USB 1.1 compatibility allows the same hub to serve legacy equipment. Because the commercial device is specified for 0°C to 70°C, the enclosure temperature and internal heating must remain inside that range. Industrial implementations should also include connector overvoltage protection, ESD strategy, robust grounding, and validated separation between sensitive analog or safety-related circuitry and high-speed USB routes.
Được đề xuất
Embedded USB Peripheral Expansion
The TUSB8043RGCR can expand USB connectivity in an embedded host without allocating four host-controller ports. The controller manages one upstream connection and four downstream USB hub paths, providing a practical bridge between embedded processors and external peripherals. Its internal USB HID-to-I2C interface allows a host to reach an attached configuration EEPROM, which can simplify implementation of programmable hub identity or device settings. PCB planning should keep SuperSpeed pairs short and impedance-controlled, provide an uninterrupted ground reference beneath each pair, and place the clock network close to the controller. Firmware must enumerate the hub correctly and manage power states according to the device programming requirements in the manufacturer datasheet.
Được đề xuất
Test and Measurement Equipment
The TUSB8043RGCR fits test equipment that needs several USB instruments or storage devices connected through one control port. Four downstream ports simplify workstation integration, while SuperSpeed operation up to 5.0 Gbps supports high-throughput capture or logging devices. The HID-to-I2C configuration function can make a connected EEPROM available to the USB host, reducing the need for a separate programming path when hub-specific nonvolatile settings are required. For laboratory equipment, pay particular attention to ground-loop prevention, chassis and signal-ground topology, ESD protection at externally accessible connectors, and USB trace routing away from noisy power-conversion stages. Qualification should include the intended combination of downstream devices and cables.
Được đề xuất
USB Storage and Media Hub
The TUSB8043RGCR can support a compact hub for USB storage, card readers, and media peripherals. Four downstream ports give users a single connection point, and USB 3.1 Gen1 operation up to 5.0 Gbps provides the link rate needed for bursty storage transfers. Legacy USB 2.0 and USB 1.1 devices remain supported, allowing older peripherals to share the hub. The design must account for simultaneous enumeration and power-demand scenarios because controller bandwidth and system power are separate constraints. Use connector power protection, compliant power switching where required, solid return paths, and short USB routes. Final thermal and electrical performance should be evaluated with the maximum intended peripheral population.
Được đề xuất
Desktop USB Expansion
The TUSB8043RGCR is appropriate for desktop accessories that add four USB connections without requiring a separate host controller for each peripheral. The compact 9 x 9 mm, 64-pin RGC VQFN package leaves room for routing around the controller, and the four-port architecture supports a mixture of high-speed and legacy devices. The HID-to-I2C path can support EEPROM programming when the hub must retain configuration. Practical implementation requires careful exposed-pad grounding, placement of decoupling capacitors, clock-component placement near the relevant pins, and controlled impedance on USB differential pairs. Validate the complete design with target peripheral combinations because system-generated USB traffic, connector behavior, and cable compatibility affect the final user experience.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TUSB8043RGCR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TUSB8043AIRGCR | TUSB8043ARGCR | TUSB8043RGCT | TUSB8043IRGCR |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 64-pin RGC VQFN (9 x 9 mm) | 64-pin RGC VQFN (9 x 9 mm) | 64-pin RGC VQFN (9 x 9 mm) | 64-pin RGC VQFN (9 x 9 mm) | 64-pin RGC VQFN (9 x 9 mm) |
| Number of Downstream Ports | 4 ports | 4 ports | 4 ports | 4 ports | 4 ports |
| Maximum SuperSpeed Data Rate | 5.0 Gbps | 5.0 Gbps | 5.0 Gbps | 5.0 Gbps | 5.0 Gbps |
| USB Interface Support | USB 3.1, USB 2.0, USB 1.1 | USB 3.1, USB 2.0, USB 1.1 | USB 3.1, USB 2.0, USB 1.1 | USB 3.1, USB 2.0, USB 1.1 | USB 3.1, USB 2.0, USB 1.1 |
| Configuration Interface | USB HID to I2C | USB HID to I2C | USB HID to I2C | USB HID to I2C | USB HID to I2C |
| EEPROM Programming Support | Yes | Yes | Yes | Yes | Yes |
Bảo phân biệt quan trọng
- Four SuperSpeed hub ports in one controller (vsTUSB8043RGCT)
- Integrated HID-to-I2C configuration path (vsTUSB8043AIRGCR)
- Four-port integration reduces external hub-controller count (vsTUSB8043ARGCR)
Ghi chú thiết kế
Route USB differential pairs as controlled-impedance, tightly coupled traces with a continuous reference plane beneath them. Avoid vias where practical, minimize stubs, and keep the pairs away from clocks, switching inductors, and switching-node copper. The manufacturer layout guidance and the pin-description table should govern connector, controller, and protection-device placement because signal-order constraints are device specific.
Place all decoupling capacitors as close as practical to their associated power and ground pins, with short ground paths and no plane splits beneath the controller region. Treat the exposed pad as both a thermal surface and an electrical connection according to the package drawing. A continuous ground reference and carefully arranged thermal-via pattern help reduce inductance and improve heat transfer without compromising USB signal integrity.
Do not select a replacement solely because it uses a 64-pin VQFN. Confirm the RGC pin assignments, exposed-pad treatment, USB trace order, clock connection, EEPROM interface, operating-temperature grade, and device configuration for every proposed substitute. The TUSB8043 family includes multiple ordering and temperature-grade suffixes, so the final schematic and PCB review should use the exact manufacturer datasheet for the selected MPN.
Design the USB power path for the combined startup and operating demand of all intended peripherals, not only the controller. Apply the USB connector and overvoltage requirements, account for inrush behavior, and keep switching regulators away from sensitive USB pairs and the reference crystal. Confirm supply sequencing, decoupling, and exposed-pad thermal performance using the manufacturer electrical characteristics and the final enclosure environment.
Follow Texas Instruments application note SLLA122 when selecting the USB clock crystal and associated load-capacitance network. Place the crystal and load capacitors close to the controller, keep the clock path away from noisy sources, and avoid long ground returns through the crystal circuit. Validate clock amplitude, jitter, startup behavior, and high-speed USB eye performance on the finished PCB rather than relying on schematic connectivity alone.
Thông tin tuân thủ
The commercial TUSB8043RGCR is not identified as an automotive-qualified device in the verified product information. Detailed environmental, RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations must be confirmed on the manufacturer product page or declarations for the exact ordering suffix.