Microchip Technology

USB2514I-AEZG-TR - 4-Port USB 2.0 Hub Controller | Microchip

MPN: USB2514I-AEZG-TR ✓ Aktif
3.3 V Vdss 36-pin QFN Package
MOQ: 1 |

USB2514I-AEZG-TR Genel Bakış

Microchip Technology USB2514I-AEZG-TR is a four-port USB 2.0 high-speed hub controller in a 36-pin QFN package measuring 6 x 6 mm. The controller operates from a 3.3 V supply and uses I2C configuration, making it suitable for systems that require an embedded USB hub rather than a standalone hub assembly. Its USB 2.0 high-speed interface supports a maximum signaling rate of 480 Mb/s.

A USB hub controller is an interface IC that manages one upstream USB connection and multiple downstream ports. It belongs to the hierarchy of USB interface controllers, interface ICs, and integrated circuits. By embedding hub-control functions in a compact package, the device lets equipment designers create an internal USB topology for external connectors, internal peripherals, user-interface devices, or service connections without adding a complete external hub.

The principal features of the USB2514I-AEZG-TR are its four downstream USB 2.0 ports, 480 Mb/s high-speed operation, 3.3 V supply voltage, and I2C configuration interface. The USB251xB family uses MultiTRAK technology for mixed-speed device support, allowing full-speed and low-speed devices to coexist with high-speed peripherals on the same hub. The 36-QFN package also includes an exposed thermal pad, providing a designated thermal and electrical land on the PCB.

The -I-AEZG ordering code identifies the industrial-style 36-pin QFN configuration, while the -TR suffix identifies tape-and-reel production handling. The package has a 0.50 mm pitch and a nominal 1.00 mm height. Configuration over I2C allows firmware or system software to control hub behavior rather than relying entirely on fixed hardware defaults, which can simplify integration into larger embedded systems.

Typical uses include industrial control panels, laboratory equipment, printers, set-top boxes, embedded computers, media systems, and compact USB expansion equipment. In each application, the upstream USB connection is routed to the controller, while the four downstream ports provide connectivity for keyboards, storage devices, network adapters, service interfaces, or other peripherals. The internal hub approach can reduce cable clutter when those connections must terminate inside the enclosure.

PCB design should follow the manufacturer’s QFN land pattern and exposed-pad recommendations, with short high-speed connections and continuous ground-plane return paths. Place the required decoupling and crystal or clock-support components close to their associated pins, keep USB differential routing away from noisy power-conversion stages, and observe the exposed-pad assembly requirements. Confirm device identification, firmware configuration, and register defaults during hardware bring-up because parts within the broader hub family may use different identifiers or defaults.

This page combines the device’s USB 2.0, four-port, 3.3 V, I2C, and 36-QFN characteristics with package-level guidance, pin-compatible family references, and design-oriented comparison points. It is intended to help engineers determine whether the USB2514I-AEZG-TR fits an embedded four-port USB hub before beginning board layout and firmware integration.

Drop-in alternatifler için USB2514I-AEZG-TR — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller USB2514I-AEZG-TR (aynı form faktörü ve ayağa oturma) — farklı olan Product Type, Configuration Interface, Management Interface, Package, Operating Temperature Range.

Microchip Technology
Product Type: USB 2.0 Multi-Format Flash Media Controller
Configuration Interface: External I2C EEPROM interface
İle Karşılaştır USB2514I-AEZG-TR →
Microchip Technology
Product Type: USB 2.0 Hi-Speed Hub Controller
Management Interface: SMBus / I2C
Package: 36-QFN (6x6 mm) with exposed pad
İle Karşılaştır USB2514I-AEZG-TR →
Microchip Technology
Configuration Interface: I²C EEPROM
Management Interface: SMBus 2-wire interface
Package: 36-QFN, 6 mm × 6 mm
İle Karşılaştır USB2514I-AEZG-TR →
Microchip Technology
Product Type: USB 2.0 Hi-Speed 4-Port Hub Controller
Management Interface: I2C
Package: QFN-36 (6 x 6 mm, 0.50 mm pitch)
İle Karşılaştır USB2514I-AEZG-TR →

USB2514B-AEZG-TR

✅ Yerleştirme
Microchip Technology
📦 QFN-36 (6 x 6 mm)
USB 2.0 Hi-Speed 4-Port Hub Controller · Microchip Technology · 4 x USB 2.0 · 1 x USB 2.0 · USB 2.0 High-Speed (480 Mbps) · 3.3 V · 0 to 70 C (32 to 158 F) · I2C

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

USB2513BI-AEZG-TR

✅ Yerleştirme
Microchip Technology
📦 QFN-36 (6 x 6 mm)
USB 2.0 high-speed hub controller · 3 ports · USB 2.0 high-speed · 3 V to 3.6 V · MultiTRAK multi-transaction translator · I²C EEPROM · SMBus 2-wire interface · 36-QFN, 6 mm × 6 mm

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

USB2513B-AEZC-TR

✅ Yerleştirme
Microchip Technology
📦 QFN-36 (6 x 6 mm)
USB 2.0 Hi-Speed Hub Controller · 3 · USB 2.0 Hi-Speed (480 Mbps) · 3.3 V · -40 C to +85 C · 36-QFN (6x6 mm) with exposed pad · Surface Mount · 1 Hi-Speed USB 2.0 port

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

USB2240-AEZG-06

✅ Yerleştirme
Microchip Technology
📦 QFN-36 (6 x 6 mm)
USB 2.0 Multi-Format Flash Media Controller · USB 2.0 · High-Speed · 3 V to 3.6 V · 36-pin QFN · 6 x 6 mm · SD, MMC, MS, and xD flash media · USB 2.0 host controller interface

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

USB2514I-AEZG-TR Özellikler

Product Type USB 2.0 high-speed hub controller
Downstream Port Count 4 ports
USB Standard USB 2.0
Maximum USB Data Rate 480 Mb/s
Besleme Gerilimi 3.3 V
Configuration Interface I2C
Package Type 36-pin QFN
Package Dimensions 6 x 6 mm
Package Pitch 0.50 mm
Package Height 1.00 mm
Montaj Türü Surface mount
Exposed Pad Yes
Production Packaging Tape and reel
RoHS Compliance Compliant

USB2514I-AEZG-TR 1.00 mm Pin Yapısı Kılavuzu

USB2514I-AEZG-TR (1.00 mm paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

1.00 mm paket pin çizelgesi için USB2514I-AEZG-TR

Ayrıntılı pin çıkış verisi mevcut değil: USB2514I-AEZG-TR.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

USB2514I-AEZG-TR için uygundur 6 uygulamas: Industrial Control Panel USB Expansion, Embedded Printer USB Interface, Test and Measurement Instrument Hub, Set-Top Box and Media Hub, Embedded Computer Service Connectivity, USB Charging and Accessory Hub.

🏭

Industrial Control Panel USB Expansion

The USB2514I-AEZG-TR fits an industrial control panel that needs an internal four-port USB 2.0 hub without relying on an external enclosure. Its four downstream ports can serve operator-interface storage, service adapters, keyboards, and other panel peripherals while one upstream port connects to the controller. The 480 Mb/s high-speed interface supports storage-class equipment, and 3.3 V operation suits embedded digital systems. Its 36-QFN package preserves PCB area, while I2C configuration allows software to verify hub behavior and register settings during startup.

🖨️

Embedded Printer USB Interface

The USB2514I-AEZG-TR is useful in a multifunction printer or print engine that exposes several internal and external USB connections. Two downstream ports can accommodate service interfaces and storage, while additional ports support external accessories through the same embedded hub controller. USB 2.0 high-speed operation provides a nominal 480 Mb/s link for compatible peripherals. The 3.3 V device and 6 x 6 mm QFN package simplify integration beside the printer’s main digital processor, although high-speed traces still require controlled impedance and continuous ground references.

🔧

Test and Measurement Instrument Hub

The USB2514I-AEZG-TR can consolidate connections in a laboratory instrument that accepts external storage, probes, adapters, and configuration peripherals. Its four-port architecture reduces the need for a separate external USB hub and keeps connections behind the instrument enclosure. The controller’s 480 Mb/s USB 2.0 rate is appropriate for throughput-oriented peripherals, while full-speed and low-speed devices can operate through the family’s MultiTRAK mixed-speed support. I2C configuration helps the instrument firmware confirm the active controller and manage hub settings during initialization.

📺

Set-Top Box and Media Hub

The USB2514I-AEZG-TR is suitable for a set-top box or media appliance that needs to combine several USB peripherals behind one upstream host connection. Users may attach storage, keyboards, network adapters, or service devices to the four downstream ports. The USB 2.0 high-speed path supports compatible media peripherals at up to 480 Mb/s, and the compact 36-QFN package fits tightly integrated consumer electronics. Firmware should verify device identifiers and default registers because related USB251xB members can use different configuration defaults.

🖥️

Embedded Computer Service Connectivity

The USB2514I-AEZG-TR can provide service and maintenance connectivity inside an embedded computer or industrial terminal. Four downstream ports can connect storage, a recovery interface, a network adapter, and a local diagnostic device while the upstream port remains dedicated to the host controller. This arrangement reduces external connector requirements without changing the host’s USB 2.0 topology. The 3.3 V supply and surface-mount QFN package support dense embedded construction, while the I2C interface gives system firmware a means to validate and configure the hub controller.

⚡

USB Charging and Accessory Hub

The USB2514I-AEZG-TR can organize an accessory hub built around a host processor or dedicated USB controller. Its four downstream USB 2.0 ports support keyboards, mice, storage devices, and other compatible accessories, while the upstream link connects to the host. MultiTRAK mixed-speed support permits full-speed and low-speed accessories to coexist with high-speed devices. Because this controller manages USB data connectivity rather than device charging-current policy, downstream power limits must be designed separately in the system’s power-distribution circuitry.

What is the USB2514I-AEZG-TR?
The USB2514I-AEZG-TR is a four-port USB 2.0 high-speed hub controller from Microchip Technology. According to the manufacturer datasheet for the USB251xB and USB251xBi families, it supports signaling up to 480 Mb/s, operates from a 3.3 V supply, and uses I2C for configuration. It is packaged in a 36-QFN package measuring 6 x 6 mm with 0.50 mm pitch.
How many USB ports does the USB2514I-AEZG-TR support?
The USB2514I-AEZG-TR supports four downstream USB ports in addition to its upstream host-facing connection. The manufacturer USB251xB datasheet identifies the device as a USB 2.0 high-speed hub controller for mixed-speed USB systems. The internal MultiTRAK implementation supports high-speed, full-speed, and low-speed device attachment on the same hub.
What is the maximum data rate of USB2514I-AEZG-TR?
The USB2514I-AEZG-TR supports a maximum USB 2.0 high-speed signaling rate of 480 Mb/s. According to the manufacturer USB251xB datasheet, the controller is intended for embedded four-port USB hub implementations. Actual application throughput depends on the upstream host link, connected device speeds, USB protocol overhead, and the performance of the devices attached to the hub.
What package does USB2514I-AEZG-TR use?
The USB2514I-AEZG-TR uses a 36-pin QFN package measuring 6 x 6 mm, with a 0.50 mm pitch and approximately 1.00 mm package height. The exposed-pad construction requires a PCB land pattern that accommodates thermal and electrical connection to the center pad. Use the exact package drawing and land pattern in the manufacturer datasheet when defining solder-mask and copper geometry.
Where can I download the USB2514I-AEZG-TR datasheet PDF?
The manufacturer datasheet PDF is available at https://ww1.microchip.com/downloads/en/DeviceDoc/00001692C.pdf and covers the USB251xB and USB251xBi hub-controller family. It is the preferred document for the 36-QFN footprint, electrical characteristics, pin descriptions, configuration details, and PCB layout requirements. The same manufacturer document also identifies supported direct drop-in family relationships.
Where can I find the USB2514I-AEZG-TR pinout?
The USB2514I-AEZG-TR uses a 36-pin QFN footprint, but a complete numbered pin list is not included in the accessible product-page snippets. Use the pin-description table and package drawing in the manufacturer USB251xB datasheet at https://ww1.microchip.com/downloads/en/DeviceDoc/00001692C.pdf before assigning PCB nets. Confirm each signal, power domain, exposed-pad connection, and no-connect position against that table.
How is the USB2514I-AEZG-TR configured?
The USB2514I-AEZG-TR is configured through an I2C interface. According to the manufacturer USB251xB datasheet, device identification, register defaults, and related configuration details can differ among family members. Firmware should therefore identify the mounted controller and verify the expected register values during initialization rather than assuming that every USB251x variant has identical defaults.
Can USB2514I-AEZG-TR support mixed-speed USB devices?
Yes, the USB2514I-AEZG-TR supports mixed-speed USB attachments through the MultiTRAK implementation described in the manufacturer USB251xB datasheet. High-speed peripherals can use the 480 Mb/s USB 2.0 path, while full-speed and low-speed devices remain compatible with the hub. Enumeration and transaction scheduling are handled internally by the controller.
What can replace the USB2514I-AEZG-TR?
The closest pin-compatible family options are USB2514B-AEZG-TR and USB2513BI-AEZG-TR, both identified in the manufacturer family documentation as direct drop-in choices. USB2513B-AEZC-TR is another 36-QFN family member but provides three rather than four downstream ports. Confirm exposed-pad layout, firmware identifiers, register defaults, and application requirements before approving any substitution.
Is USB2514I-AEZG-TR the same as USB2514B-AEZG-TR?
The USB2514B-AEZG-TR is a closely related four-port USB 2.0 hub controller in the same QFN-36 package family and is identified by the manufacturer as a direct drop-in relationship. Device identifiers, register defaults, and related details may differ, so existing firmware may require updates. PCB compatibility does not by itself guarantee identical software behavior.
When should I choose USB2514I-AEZG-TR instead of USB2514B-AEZG-TR?
Choose the USB2514I-AEZG-TR when its specific -I-AEZG device configuration, electrical behavior, and ordering code match the product requirements. Choose USB2514B-AEZG-TR when it offers a preferred lifecycle, sourcing, or functional configuration for a new design. Because the manufacturer notes that identifiers and register defaults can differ, compare the device-specific electrical tables and firmware configuration before selecting between them.
Is USB2514I-AEZG-TR suitable for an embedded four-port USB hub?
The USB2514I-AEZG-TR is suitable for an embedded four-port USB 2.0 hub because it combines four downstream ports, 480 Mb/s high-speed operation, 3.3 V operation, and I2C configuration in a 36-QFN package. It is especially useful where the hub must reside inside a printer, industrial panel, test instrument, set-top box, or embedded-computer enclosure rather than in an external desktop enclosure.
Is there a Microchip equivalent with three ports instead of four?
The USB2513B-AEZC-TR is a Microchip three-port USB 2.0 high-speed hub controller in a 36-QFN package, compared with the four-port USB2514I-AEZG-TR. It can serve as a family alternative when one fewer downstream port is acceptable. Because port count and register defaults differ, verify the PCB assignments and firmware behavior rather than treating it as a transparent functional substitution.
What is the best cross-brand equivalent for USB2514I-AEZG-TR?
No cross-brand drop-in equivalent can be confirmed from the available manufacturer and distributor documentation. The verified family references identify Microchip devices, while the cross-reference results do not establish a competitor with the same 36-QFN footprint, four-port configuration, electrical behavior, and pin compatibility. Use Microchip’s cross-reference search and validate any competitor candidate against the complete pinout, USB timing, power requirements, and firmware expectations.
Where can I buy USB2514I-AEZG-TR and what is the lead time?
Use the Request a Quote form on this page to request current USB2514I-AEZG-TR availability, unit pricing, and lead time for the exact tape-and-reel ordering code. Current quantity-break pricing and stock status are not shown in the accessible distributor excerpts, so no fixed price or availability claim should be inferred. Include the required quantity, target date, and shipment destination in the request.

Mühendislik referans verileri: USB2514I-AEZG-TR — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the USB2514I-AEZG-TR when an embedded system requires four USB 2.0 high-speed downstream ports, 3.3 V operation, I2C configuration, and a 36-QFN footprint. It is well matched to printers, industrial panels, test instruments, media systems, and service-oriented embedded computers. USB2514B-AEZG-TR is the closest same-family alternative because it retains the four-port function and 36-QFN package, but device identifiers and register defaults must be reviewed before firmware reuse. USB2513BI-AEZG-TR or USB2513B-AEZC-TR is appropriate only when reducing the hub from four ports to three is acceptable and the associated pin assignments and firmware differences have been checked. USB2240-AEZG-06 requires complete electrical, pinout, and software validation before use as a substitution. No cross-brand replacement should be selected without proving footprint compatibility, USB timing behavior, power requirements, mixed-speed behavior, and software configuration equivalence.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün USB2514B-AEZG-TR USB2513BI-AEZG-TR USB2513B-AEZC-TR USB2240-AEZG-06
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package QFN-36 (6 x 6 mm) QFN-36 (6 x 6 mm) QFN-36 (6 x 6 mm) QFN-36 (6 x 6 mm) QFN-36 (6 x 6 mm)
USB Standard USB 2.0 high speed USB 2.0 high speed USB 2.0 high speed USB 2.0 high speed USB 2.0 high speed
Maximum Data Rate 480 Mb/s 480 Mb/s 480 Mb/s 480 Mb/s 480 Mb/s
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V

Ana Farklılayıcılar

  • Maintains four downstream ports in the same 36-QFN hub-controller class (karşılaştırma:USB2513B-AEZC-TR)
  • Uses the manufacturer-defined I-AEZG configuration and four-port architecture (karşılaştırma:USB2240-AEZG-06)
  • Provides a direct same-family drop-in path with four downstream ports (karşılaştırma:USB2513BI-AEZG-TR)

Tasarım Notları

Use the exact 36-QFN land pattern from the manufacturer datasheet, including the exposed-pad geometry, solder-mask opening, and paste template. The 6 x 6 mm body uses a 0.50 mm pitch, so assembly capabilities and PCB registration must be adequate for that spacing. Do not substitute a generic 36-QFN footprint without comparing pad dimensions, exposed-pad size, pin numbering, and paste volume against the package drawing.

Route USB differential pairs as a controlled-impedance pair on consecutive layers with a continuous ground plane beneath the pair. Keep the traces short, minimize stubs and branch points, and place or remove unused test pads conservatively. Follow the manufacturer’s recommended component placement for crystal, clock, decoupling, and termination networks so that high-speed USB signals are not exposed to excessive trace length or return-path discontinuities.

Do not assume that a related USB251xB part has identical device identifiers or register defaults. The manufacturer family documentation explicitly notes that identifiers and defaults can differ. Identify the controller through its hardware interface, compare the resulting configuration with the expected hub layout, and update firmware when moving from USB2514I-AEZG-TR to a related drop-in family member.

The controller operates from 3.3 V, while downstream USB power must be supplied by the system rather than inferred from the logic rail. Follow the datasheet’s decoupling requirements, connect the exposed pad according to its recommended land and thermal design, and provide the required USB bus-power switching or protection where applicable. Separate noisy power-conversion stages from USB routing to reduce conducted and radiated interference.

Uyumluluk Bilgisi

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

RoHS-compliant status is identified for the USB2514I-AEZG device family. The exact USB2514I-AEZG-TR lead-free, halogen-free, REACH, conflict-minerals, and automotive-qualification statements require confirmation from the manufacturer product documentation or lot-specific material declarations.

İlgili Aramalar

usb2514i aezg USB2514I-AEZG-TR datasheet USB2514I-AEZG-TR pinout USB2514I-AEZG-TR datasheet pdf USB2514I-AEZG-TR equivalent USB2514I-AEZG-TR replacement USB2514I-AEZG-TR QFN-36 footprint USB2514I-AEZG-TR USB 2.0 hub USB2514I-AEZG-TR vs USB2514B-AEZG-TR Microchip USB2514I-AEZG-TR USB2514I-AEZG-TR price USB2514I-AEZG-TR stock USB2514I-AEZG-TR application circuit USB2514I-AEZG-TR four port hub controller

İlgili Bileşenler ve Terimler

Microchip Technology USB2514I-AEZG-TR USB2514B-AEZG-TR USB2513BI-AEZG-TR USB2513B-AEZC-TR USB2240-AEZG-06 USB hub controller USB interface controller USB interface IC USB 2.0 high-speed MultiTRAK technology I2C four-port USB hub 480 Mb/s 3.3 V supply QFN-36 36-pin QFN 6 x 6 mm package 0.50 mm pitch exposed pad surface mount RoHS mixed-speed USB USB peripheral embedded USB hub
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle