USB2514I-AEZG-TR - 4-Port USB 2.0 Hub Controller | Microchip
부품 번호: USB2514I-AEZG-TR ✓ 활성USB2514I-AEZG-TR 개요
A USB hub controller is an interface IC that manages one upstream USB connection and multiple downstream ports. It belongs to the hierarchy of USB interface controllers, interface ICs, and integrated circuits. By embedding hub-control functions in a compact package, the device lets equipment designers create an internal USB topology for external connectors, internal peripherals, user-interface devices, or service connections without adding a complete external hub.
The principal features of the USB2514I-AEZG-TR are its four downstream USB 2.0 ports, 480 Mb/s high-speed operation, 3.3 V supply voltage, and I2C configuration interface. The USB251xB family uses MultiTRAK technology for mixed-speed device support, allowing full-speed and low-speed devices to coexist with high-speed peripherals on the same hub. The 36-QFN package also includes an exposed thermal pad, providing a designated thermal and electrical land on the PCB.
The -I-AEZG ordering code identifies the industrial-style 36-pin QFN configuration, while the -TR suffix identifies tape-and-reel production handling. The package has a 0.50 mm pitch and a nominal 1.00 mm height. Configuration over I2C allows firmware or system software to control hub behavior rather than relying entirely on fixed hardware defaults, which can simplify integration into larger embedded systems.
Typical uses include industrial control panels, laboratory equipment, printers, set-top boxes, embedded computers, media systems, and compact USB expansion equipment. In each application, the upstream USB connection is routed to the controller, while the four downstream ports provide connectivity for keyboards, storage devices, network adapters, service interfaces, or other peripherals. The internal hub approach can reduce cable clutter when those connections must terminate inside the enclosure.
PCB design should follow the manufacturer’s QFN land pattern and exposed-pad recommendations, with short high-speed connections and continuous ground-plane return paths. Place the required decoupling and crystal or clock-support components close to their associated pins, keep USB differential routing away from noisy power-conversion stages, and observe the exposed-pad assembly requirements. Confirm device identification, firmware configuration, and register defaults during hardware bring-up because parts within the broader hub family may use different identifiers or defaults.
This page combines the device’s USB 2.0, four-port, 3.3 V, I2C, and 36-QFN characteristics with package-level guidance, pin-compatible family references, and design-oriented comparison points. It is intended to help engineers determine whether the USB2514I-AEZG-TR fits an embedded four-port USB hub before beginning board layout and firmware integration.
드롭인 대체품: USB2514I-AEZG-TR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: USB2514I-AEZG-TR (동일 폼 팩터 및 풋프린트) — 차이점: Product Type, Configuration Interface, Management Interface, Package, Operating Temperature Range.
USB2514B-AEZG-TR
✅ 드롭인가격 문의
데이터시트 보기 →USB2513BI-AEZG-TR
✅ 드롭인가격 문의
데이터시트 보기 →USB2513B-AEZC-TR
✅ 드롭인가격 문의
데이터시트 보기 →USB2240-AEZG-06
✅ 드롭인가격 문의
데이터시트 보기 →USB2514I-AEZG-TR 사양
| Product Type | USB 2.0 high-speed hub controller |
| Downstream Port Count | 4 ports |
| USB Standard | USB 2.0 |
| Maximum USB Data Rate | 480 Mb/s |
| 공급 전압 | 3.3 V |
| Configuration Interface | I2C |
| Package Type | 36-pin QFN |
| Package Dimensions | 6 x 6 mm |
| Package Pitch | 0.50 mm |
| Package Height | 1.00 mm |
| 실장 유형 | Surface mount |
| Exposed Pad | Yes |
| Production Packaging | Tape and reel |
| RoHS Compliance | Compliant |
USB2514I-AEZG-TR 1.00 mm 핀 구성 가이드
USB2514I-AEZG-TR(1.00 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: USB2514I-AEZG-TR.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
USB2514I-AEZG-TR 적합 용도: 6 애플리케이션s: Industrial Control Panel USB Expansion, Embedded Printer USB Interface, Test and Measurement Instrument Hub, Set-Top Box and Media Hub, Embedded Computer Service Connectivity, USB Charging and Accessory Hub.
Industrial Control Panel USB Expansion
The USB2514I-AEZG-TR fits an industrial control panel that needs an internal four-port USB 2.0 hub without relying on an external enclosure. Its four downstream ports can serve operator-interface storage, service adapters, keyboards, and other panel peripherals while one upstream port connects to the controller. The 480 Mb/s high-speed interface supports storage-class equipment, and 3.3 V operation suits embedded digital systems. Its 36-QFN package preserves PCB area, while I2C configuration allows software to verify hub behavior and register settings during startup.
추천
Embedded Printer USB Interface
The USB2514I-AEZG-TR is useful in a multifunction printer or print engine that exposes several internal and external USB connections. Two downstream ports can accommodate service interfaces and storage, while additional ports support external accessories through the same embedded hub controller. USB 2.0 high-speed operation provides a nominal 480 Mb/s link for compatible peripherals. The 3.3 V device and 6 x 6 mm QFN package simplify integration beside the printer’s main digital processor, although high-speed traces still require controlled impedance and continuous ground references.
추천
Test and Measurement Instrument Hub
The USB2514I-AEZG-TR can consolidate connections in a laboratory instrument that accepts external storage, probes, adapters, and configuration peripherals. Its four-port architecture reduces the need for a separate external USB hub and keeps connections behind the instrument enclosure. The controller’s 480 Mb/s USB 2.0 rate is appropriate for throughput-oriented peripherals, while full-speed and low-speed devices can operate through the family’s MultiTRAK mixed-speed support. I2C configuration helps the instrument firmware confirm the active controller and manage hub settings during initialization.
추천
Set-Top Box and Media Hub
The USB2514I-AEZG-TR is suitable for a set-top box or media appliance that needs to combine several USB peripherals behind one upstream host connection. Users may attach storage, keyboards, network adapters, or service devices to the four downstream ports. The USB 2.0 high-speed path supports compatible media peripherals at up to 480 Mb/s, and the compact 36-QFN package fits tightly integrated consumer electronics. Firmware should verify device identifiers and default registers because related USB251xB members can use different configuration defaults.
추천
Embedded Computer Service Connectivity
The USB2514I-AEZG-TR can provide service and maintenance connectivity inside an embedded computer or industrial terminal. Four downstream ports can connect storage, a recovery interface, a network adapter, and a local diagnostic device while the upstream port remains dedicated to the host controller. This arrangement reduces external connector requirements without changing the host’s USB 2.0 topology. The 3.3 V supply and surface-mount QFN package support dense embedded construction, while the I2C interface gives system firmware a means to validate and configure the hub controller.
추천
USB Charging and Accessory Hub
The USB2514I-AEZG-TR can organize an accessory hub built around a host processor or dedicated USB controller. Its four downstream USB 2.0 ports support keyboards, mice, storage devices, and other compatible accessories, while the upstream link connects to the host. MultiTRAK mixed-speed support permits full-speed and low-speed accessories to coexist with high-speed devices. Because this controller manages USB data connectivity rather than device charging-current policy, downstream power limits must be designed separately in the system’s power-distribution circuitry.
추천
추천 제품 요약
엔지니어링 참조 데이터: USB2514I-AEZG-TR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | USB2514B-AEZG-TR | USB2513BI-AEZG-TR | USB2513B-AEZC-TR | USB2240-AEZG-06 |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | QFN-36 (6 x 6 mm) | QFN-36 (6 x 6 mm) | QFN-36 (6 x 6 mm) | QFN-36 (6 x 6 mm) | QFN-36 (6 x 6 mm) |
| USB Standard | USB 2.0 high speed | USB 2.0 high speed | USB 2.0 high speed | USB 2.0 high speed | USB 2.0 high speed |
| Maximum Data Rate | 480 Mb/s | 480 Mb/s | 480 Mb/s | 480 Mb/s | 480 Mb/s |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
주요 차별점
- Maintains four downstream ports in the same 36-QFN hub-controller class (vs USB2513B-AEZC-TR)
- Uses the manufacturer-defined I-AEZG configuration and four-port architecture (vs USB2240-AEZG-06)
- Provides a direct same-family drop-in path with four downstream ports (vs USB2513BI-AEZG-TR)
설계 노트
Use the exact 36-QFN land pattern from the manufacturer datasheet, including the exposed-pad geometry, solder-mask opening, and paste template. The 6 x 6 mm body uses a 0.50 mm pitch, so assembly capabilities and PCB registration must be adequate for that spacing. Do not substitute a generic 36-QFN footprint without comparing pad dimensions, exposed-pad size, pin numbering, and paste volume against the package drawing.
Route USB differential pairs as a controlled-impedance pair on consecutive layers with a continuous ground plane beneath the pair. Keep the traces short, minimize stubs and branch points, and place or remove unused test pads conservatively. Follow the manufacturer’s recommended component placement for crystal, clock, decoupling, and termination networks so that high-speed USB signals are not exposed to excessive trace length or return-path discontinuities.
Do not assume that a related USB251xB part has identical device identifiers or register defaults. The manufacturer family documentation explicitly notes that identifiers and defaults can differ. Identify the controller through its hardware interface, compare the resulting configuration with the expected hub layout, and update firmware when moving from USB2514I-AEZG-TR to a related drop-in family member.
The controller operates from 3.3 V, while downstream USB power must be supplied by the system rather than inferred from the logic rail. Follow the datasheet’s decoupling requirements, connect the exposed pad according to its recommended land and thermal design, and provide the required USB bus-power switching or protection where applicable. Separate noisy power-conversion stages from USB routing to reduce conducted and radiated interference.
규정 준수 정보
RoHS-compliant status is identified for the USB2514I-AEZG device family. The exact USB2514I-AEZG-TR lead-free, halogen-free, REACH, conflict-minerals, and automotive-qualification statements require confirmation from the manufacturer product documentation or lot-specific material declarations.