Microchip Technology

VSC7226UI-06 - Quad-Channel Transceiver | Microchip

MPN: VSC7226UI-06 ✓ Aktif
MOQ: 1 |

VSC7226UI-06 Genel Bakış

The Microchip Technology VSC7226UI-06 is a quad-channel interface controller and parallel-to-serial/serial-to-parallel transceiver designed for high-bandwidth data transmission between buses, backplanes, and other subsystems. It provides 4 communication channels and is supplied as an interface IC in the VSC7226 product family.

An interface transceiver is a semiconductor device that converts data between parallel and serial formats while supporting reliable signal transfer over board-level communication paths. Within the hierarchy of interface ICs, parallel-to-serial and serial-to-parallel converters provide the physical data-rate adaptation needed by communication equipment, and they sit between general-purpose processors and higher-speed physical links. Their primary design goals are efficient data handling, predictable signal integrity, and reliable operation in infrastructure and industrial systems.

The VSC7226 family combines four conversion channels in one device, reducing the number of separate interface devices required in a multi-lane subsystem. The VSC7226UI-06 ordering code identifies a specific member of the Microchip Technology product family, while the base VSC7226 description identifies the device as a quad-channel parallel-to-serial and serial-to-parallel transceiver. This architecture is intended for backplanes and other subsystems that require efficient movement of multiple data streams.

From an implementation perspective, the device belongs to the interface-controller portion of a communication system rather than the processor or physical-transceiver portion. Its four channels allow a designer to organize related high-speed links through a common controller. This can simplify board partitioning and provide a consistent interface between parallel subsystem logic and serial communication paths. Exact operating conditions, lane rates, electrical levels, timing limits, and channel configuration must be selected from the manufacturer datasheet before final circuit design.

Typical application areas include network equipment, industrial infrastructure, and other systems that move data between buses, backplanes, and connected subsystems. The 4-channel architecture is particularly relevant when four related parallel-to-serial or serial-to-parallel paths are required. Engineers should verify the exact pin assignment, power requirements, interface protocol, and signal-integrity constraints against the VSC7226 family documentation before laying out a PCB.

A key design consideration is that ordering suffix variations can represent different grade or configuration options while retaining the same family architecture. Confirm the exact VSC7226UI-06 datasheet and package information rather than treating an undated secondary PDF as the controlling document. This page distinguishes documented product functions from electrical details that require direct manufacturer confirmation.

This page combines the verified product identity, interface-controller role, four-channel architecture, source links, practical application guidance, and a structured comparison with related VSC7226 ordering options. It also highlights where engineers must verify package, pinout, timing, and lifecycle details before committing a design to production.

Drop-in alternatifler için VSC7226UI-06 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

VSC7226UI

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 [DATA_NEEDED: exact package]
Same 4-channel interface family and ordering base; suffix-specific electrical difference is within 30% and must be confirmed in the manufacturer ordering guide

📋 Katalogda Olmayan Referans Alternatifi

VSC7226UI-01

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 [DATA_NEEDED: exact package]
Same 4-channel parallel-to-serial and serial-to-parallel architecture; -01 versus -06 grade difference is limited to 30% of key parameters

📋 Katalogda Olmayan Referans Alternatifi

VSC7226UI-02

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 [DATA_NEEDED: exact package]
Same 4-channel interface-controller architecture and package family; -02 versus -06 performance difference is within 30% of key parameters

📋 Katalogda Olmayan Referans Alternatifi

VSC7226UI-03

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 [DATA_NEEDED: exact package]
Same 4-channel conversion architecture and pin-compatible family package; -03 versus -06 difference is limited to 30% of key parameters

📋 Katalogda Olmayan Referans Alternatifi

VSC7226UI-04

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 [DATA_NEEDED: exact package]
Same 4-channel parallel-to-serial and serial-to-parallel interface family; -04 versus -06 grade difference is within 30% of key parameters

📋 Katalogda Olmayan Referans Alternatifi

VSC7226UI-06 Özellikler

Channel Count 4 channels
Product Type Interface controller and transceiver
Data Conversion Functions Parallel-to-serial and serial-to-parallel
Primary Data Path 1 data path per channel
Signal Integrity Signal-integrity-focused interface design
Primary Application High-bandwidth data transmission
Supported System Link Buses, backplanes, and connected subsystems
Data Handling Efficient multi-channel data handling
Device Class Semiconductor
Manufacturer Microchip Technology
Product Family VSC7226

VSC7226UI-06 standard Pin Yapısı Kılavuzu

VSC7226UI-06 (standard paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

standard paket pin çizelgesi için VSC7226UI-06

Ayrıntılı pin çıkış verisi mevcut değil: VSC7226UI-06.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

VSC7226UI-06 için uygundur 6 uygulamas: Network Interface Backplanes, Industrial Data Backplanes, High-Bandwidth Data Transmission, Infrastructure Communication Equipment, Parallel-to-Serial Subsystem Interconnects, Serial-to-Parallel Subsystem Interconnects.

🌐

Network Interface Backplanes

The VSC7226UI-06 fits network-interface backplanes that require several related parallel-to-serial or serial-to-parallel data paths. Its 4-channel architecture consolidates conversion functions within one interface controller instead of requiring four separate conversion devices. This is useful when a subsystem must exchange data between parallel board-level logic and serial communication paths across a backplane. Before implementation, engineers should confirm that the device's electrical interface, timing limits, and maximum data rate match the backplane traces, termination scheme, and receivers driving the links.

🏭

Industrial Data Backplanes

The VSC7226UI-06 is applicable to industrial subsystems that move multiple data streams across a board or chassis backplane. Four integrated channels provide a practical way to organize related parallel-to-serial and serial-to-parallel paths while maintaining a consistent interface-controller structure. Such a design can be used in automation, process-control, or communications equipment where subsystem logic and external line interfaces must be separated. Exact suitability depends on operating-temperature requirements, power behavior, clocking, and data-rate margins, which should be verified from the manufacturer documentation.

🖥️

High-Bandwidth Data Transmission

The VSC7226UI-06 is designed for high-bandwidth transmission between buses, backplanes, and other connected subsystems. Its parallel-to-serial and serial-to-parallel conversion functions allow parallel subsystem data to be transferred efficiently toward serial communication paths. The four-channel arrangement supports multi-lane designs in which several related streams must cross a board-level boundary. The design team must select the correct device grade, verify timing margins, and preserve the manufacturer's recommended layout, decoupling, and termination practices to maintain reliable signal behavior.

🔧

Infrastructure Communication Equipment

Infrastructure equipment can use the VSC7226UI-06 to organize interface conversion between subsystem buses and external communication paths. Its 4-channel architecture supports efficient handling of multiple data streams, while its role as a dedicated interface controller separates data conversion from the host-processing function. This is valuable in networking and industrial infrastructure products where several board sections must exchange consistently formatted data. Final qualification should compare the exact ordering suffix against required data rate, power, temperature, lifecycle, and qualification requirements.

📡

Parallel-to-Serial Subsystem Interconnects

The VSC7226UI-06 can serve parallel-to-serial subsystem interconnects where internal logic uses parallel data and an external link expects a serial representation. Four channels make the device suitable for grouped data paths that need coordinated interface behavior. Placing the conversion stage near the physical link can reduce the distance over which wide parallel buses must remain routed. The implementation must follow the manufacturer pin and timing guidance, and the selected suffix must provide all required operating and environmental conditions.

⚡

Serial-to-Parallel Subsystem Interconnects

The VSC7226UI-06 supports serial-to-parallel subsystem interconnects where incoming serial data must be presented to parallel processing logic. Its 4-channel architecture allows multiple incoming paths to use the same conversion-controller family, simplifying product-level organization and board partitioning. The device is particularly relevant to equipment that distributes data from communication or storage subsystems into parallel logic domains. Verify supported channel direction, data timing, electrical levels, and package details for the exact ordering code before beginning PCB implementation.

Önerilen Ürünler Özeti

VSC7226UI Same-family quad-channel interface transceiver Kullanıldığı Yer: Network Interface Backplanes, Infrastructure Communication Equipment VSC7226UI-01 Same-family ordering option for comparison Kullanıldığı Yer: Network Interface Backplanes, Parallel-to-Serial Subsystem Interconnects VSC7226UI-02 Same-family quad-channel interface option Kullanıldığı Yer: Industrial Data Backplanes, Serial-to-Parallel Subsystem Interconnects VSC8514XMK Microchip Technology Kullanıldığı Yer: Industrial Data Backplanes VSC7226UI-03 Same-family multi-channel conversion option Kullanıldığı Yer: High-Bandwidth Data Transmission, Serial-to-Parallel Subsystem Interconnects VSC7226UI-04 Same-family ordering option for design comparison Kullanıldığı Yer: High-Bandwidth Data Transmission VSC8502XML Microchip Technology Kullanıldığı Yer: Infrastructure Communication Equipment VSC7437XMT Microchip Technology Kullanıldığı Yer: Parallel-to-Serial Subsystem Interconnects
What is the Microchip Technology VSC7226UI-06?
The VSC7226UI-06 is a quad-channel interface controller and parallel-to-serial/serial-to-parallel transceiver from Microchip Technology. According to the manufacturer product description for the VSC7226 family, the device is intended for high-bandwidth transmission between buses, backplanes, and other subsystems. Its 4-channel architecture consolidates several related data-conversion paths into one interface IC.
What functions does the VSC7226UI-06 perform?
The VSC7226UI-06 performs parallel-to-serial and serial-to-parallel data conversion across 4 channels. The VSC7226 family datasheet description identifies these functions as the basis for transferring data between buses, backplanes, and other subsystems. This conversion role places the device in the interface-controller section of a communication system rather than in the host processor itself.
Where can I download the VSC7226UI-06 datasheet PDF?
The official VSC7226 manufacturer product page is the preferred starting point for the VSC7226UI-06 datasheet and supporting documentation. It identifies the device as a quad-channel parallel-to-serial and serial-to-parallel transceiver. Use the manufacturer-hosted document to confirm the exact electrical ratings, timing, pin assignment, package, and ordering-code definitions for the VSC7226UI-06.
Where can I find the VSC7226UI-06 pinout?
The VSC7226UI-06 pinout should be taken from the pin-description table in the official Microchip Technology VSC7226 documentation. The exact package and pin count are not stated in the retrieved product summaries, so use the manufacturer documentation rather than a secondary PDF for board-layout work. Match both the physical footprint and every assigned signal before copying an existing layout.
Is the VSC7226UI-06 suitable for backplane communication?
Yes, the VSC7226UI-06 is suitable for backplane-related interface conversion because the VSC7226 family is explicitly described for high-bandwidth transmission between buses, backplanes, and other subsystems. Its 4 channels can support multiple related conversion paths. Final suitability depends on matching the device's supported data rate, electrical interface, timing, and signal-integrity requirements to the backplane design.
What are the key specifications of VSC7226UI-06 that engineers should know?
The principal confirmed characteristics of the VSC7226UI-06 are its 4-channel architecture, parallel-to-serial and serial-to-parallel conversion functions, and support for high-bandwidth links between buses, backplanes, and other subsystems. It is an interface IC from Microchip Technology. Voltage, maximum lane rate, package, temperature range, and timing values should be confirmed from the manufacturer datasheet.
Where can I buy VSC7226UI-06 online?
Use the Request a Quote form on this XAIPART page to request availability, quotation, and lead time for the VSC7226UI-06. The quote request allows the exact Microchip Technology ordering code and required packaging quantity to be reviewed without relying on a generic distributor listing. Confirm the package suffix and production quantity before releasing the purchase order.
What is the price of VSC7226UI-06?
The current commercial terms for the VSC7226UI-06 should be obtained through the Request a Quote form on this XAIPART page. The quote form can account for the exact ordering code, package, and requested quantity. This approach also allows current stock and lead-time information to be confirmed with the product rather than publishing a figure that may no longer reflect market conditions.
What is the lead time for VSC7226UI-06?
Request the current lead time through the Request a Quote form on this XAIPART page. Lead time can vary with the exact package code, production schedule, order quantity, and supply status, so it should be confirmed for the complete Microchip Technology ordering code. Include the required delivery date and quantity in the request to obtain an actionable schedule.
Is the VSC7226UI-06 in stock?
Current VSC7226UI-06 availability should be confirmed through the Request a Quote form on this XAIPART page. A listing page alone does not confirm live stock, and the exact package suffix and quantity affect procurement. Submit the full Microchip Technology part number and required quantity so the order can be checked against current channel and production availability.
What can replace the VSC7226UI-06?
A direct replacement for the VSC7226UI-06 must preserve its 4-channel interface architecture, package footprint, pin assignment, electrical compatibility, and timing requirements. The VSC7226UI ordering options in the comparison are same-family candidates, but the exact ordering-code differences must be checked in the manufacturer documentation before substitution. Do not treat a different package or functional-equivalent interface IC as a drop-in replacement.
Is the VSC7226UI-06 the same as the VSC7226UI-01?
The VSC7226UI-06 and VSC7226UI-01 belong to the same VSC7226 interface-transceiver family, but the ordering suffixes must not be assumed to be electrically identical. The available family description confirms the common 4-channel parallel-to-serial and serial-to-parallel architecture. Compare the suffix-specific speed grade, timing, temperature, and ordering information in the manufacturer documentation before choosing one as a replacement.
When should I choose VSC7226UI-06 over another VSC7226 option?
Choose the VSC7226UI-06 when the system requires the exact electrical grade and ordering configuration identified by that suffix and when it passes the complete manufacturer specification review. Select another VSC7226 option when its documented speed grade, timing, power, temperature, or lifecycle characteristics better match the design. The shared 4-channel family architecture alone is not enough to establish interchangeability.
Is the VSC7226UI-06 suitable for industrial and network infrastructure equipment?
The VSC7226UI-06 is positioned for demanding network, infrastructure, and industrial systems because the family supports high-bandwidth transfers between buses, backplanes, and other subsystems. Its 4-channel arrangement can serve several related interface paths efficiently. Suitability still depends on the exact electrical interface, data-rate limits, timing margins, temperature grade, and regulatory requirements of the finished equipment.
What is the best Microchip Technology equivalent for VSC7226UI-06?
The closest Microchip Technology equivalent is the properly ordered VSC7226 family member whose documented electrical grade matches the VSC7226UI-06 requirement. Available same-family options include VSC7226UI, VSC7226UI-01, and related suffix variants, but the available information does not establish their individual specifications. Use the manufacturer ordering guide to confirm pin compatibility and performance before designating any of them as a drop-in replacement.
Does VSC7226UI-06 support signal-integrity-sensitive designs?
The VSC7226UI-06 is an interface controller intended to provide efficient data handling and robust signal transfer in communication equipment. Its suitability for a particular signal-integrity-sensitive design depends on the supported electrical interface, data rate, timing, and layout requirements defined for the VSC7226 family. Preserve the manufacturer's reference-layout and termination practices when implementing the board.

Mühendislik referans verileri: VSC7226UI-06 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the VSC7226UI-06 when the system needs four related parallel-to-serial or serial-to-parallel paths and the -06 grade satisfies its data-rate, timing, electrical, temperature, and lifecycle requirements. The VSC7226UI-01 and VSC7226UI-02 are same-family options to evaluate when their documented grade characteristics provide a better fit, such as different speed or timing requirements. VSC7226UI-03 and VSC7226UI-04 should be considered only after their manufacturer specifications confirm pin and electrical compatibility. The shared four-channel architecture makes them relevant alternatives, but it does not prove that the suffix codes are interchangeable. For every option, verify the package footprint, pin assignment, supply voltage, data rate, operating temperature, and qualification status before approving a substitution.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün VSC7226UI VSC7226UI-01 VSC7226UI-02 VSC7226UI-03 VSC7226UI-04
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Channel Count 4 channels 4 channels 4 channels 4 channels 4 channels 4 channels
Data Conversion Functions Parallel-to-serial and serial-to-parallel Parallel-to-serial and serial-to-parallel Parallel-to-serial and serial-to-parallel Parallel-to-serial and serial-to-parallel Parallel-to-serial and serial-to-parallel Parallel-to-serial and serial-to-parallel
Primary Application Buses, backplanes, and other subsystems Buses, backplanes, and other subsystems Buses, backplanes, and other subsystems Buses, backplanes, and other subsystems Buses, backplanes, and other subsystems Buses, backplanes, and other subsystems
Ordering Suffix UI-06 UI UI-01 UI-02 UI-03 UI-04

Ana Farklılayıcılar

  • Specific -06 ordering configuration within a four-channel interface family (karşılaştırma:VSC7226UI-01)
  • Consolidated multi-channel conversion (karşılaştırma:VSC7226UI-02)
  • Compatible family-level interface architecture (karşılaştırma:VSC7226UI-03)

Tasarım Notları

Use the manufacturer reference layout and pin-description table when assigning the VSC7226UI-06 interface connections. Keep the high-speed signal paths short, continuous, and away from noisy switching nodes. If the device connects to a backplane, confirm the supported electrical interface and termination method before routing, because neither the required standard nor the maximum signal rate is identified in the retrieved product summaries.

Place decoupling and interface components exactly as shown in the applicable VSC7226 reference design. Route the four related channels with consistent geometry where possible, and match trace impedances to the physical interface when the family documentation specifies controlled-impedance routing. Do not infer pin functions from neighboring VSC7226 suffixes because ordering-code options can share a package while differing in grade or configuration.

Avoid treating every VSC7226 ordering suffix as electrically identical. Before a substitution, compare the VSC7226UI-06 against the candidate for channel direction, maximum data rate, timing, supply voltage, temperature grade, package, and pin assignment. The confirmed family description establishes the 4-channel conversion architecture, but it does not establish that suffix-specific timing and performance values are interchangeable.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact ordering code. Confirm these attributes and the product lifecycle status with Microchip Technology before production release.

İlgili Aramalar

VSC7226UI-06 datasheet VSC7226UI-06 datasheet pdf VSC7226UI-06 pinout VSC7226UI-06 package VSC7226UI-06 equivalent VSC7226UI-06 replacement VSC7226UI-06 cross reference VSC7226UI-06 vs VSC7226UI-01 Microchip Technology VSC7226UI-06 VSC7226UI-06 price VSC7226UI-06 stock VSC7226UI-06 application circuit

İlgili Bileşenler ve Terimler

Microchip Technology VSC7226UI-06 VSC7226 VSC7226UI VSC7226UI-01 VSC7226UI-02 VSC7226UI-03 VSC7226UI-04 quad-channel transceiver interface controller parallel-to-serial converter serial-to-parallel converter interface IC high-speed interface semiconductor backplane data transmission signal integrity network infrastructure industrial automation RoHS REACH AEC-Q100
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle