VSC7226UI-06 - Quad-Channel Transceiver | Microchip
MPN: VSC7226UI-06 ✓ פעילVSC7226UI-06 סקירה
An interface transceiver is a semiconductor device that converts data between parallel and serial formats while supporting reliable signal transfer over board-level communication paths. Within the hierarchy of interface ICs, parallel-to-serial and serial-to-parallel converters provide the physical data-rate adaptation needed by communication equipment, and they sit between general-purpose processors and higher-speed physical links. Their primary design goals are efficient data handling, predictable signal integrity, and reliable operation in infrastructure and industrial systems.
The VSC7226 family combines four conversion channels in one device, reducing the number of separate interface devices required in a multi-lane subsystem. The VSC7226UI-06 ordering code identifies a specific member of the Microchip Technology product family, while the base VSC7226 description identifies the device as a quad-channel parallel-to-serial and serial-to-parallel transceiver. This architecture is intended for backplanes and other subsystems that require efficient movement of multiple data streams.
From an implementation perspective, the device belongs to the interface-controller portion of a communication system rather than the processor or physical-transceiver portion. Its four channels allow a designer to organize related high-speed links through a common controller. This can simplify board partitioning and provide a consistent interface between parallel subsystem logic and serial communication paths. Exact operating conditions, lane rates, electrical levels, timing limits, and channel configuration must be selected from the manufacturer datasheet before final circuit design.
Typical application areas include network equipment, industrial infrastructure, and other systems that move data between buses, backplanes, and connected subsystems. The 4-channel architecture is particularly relevant when four related parallel-to-serial or serial-to-parallel paths are required. Engineers should verify the exact pin assignment, power requirements, interface protocol, and signal-integrity constraints against the VSC7226 family documentation before laying out a PCB.
A key design consideration is that ordering suffix variations can represent different grade or configuration options while retaining the same family architecture. Confirm the exact VSC7226UI-06 datasheet and package information rather than treating an undated secondary PDF as the controlling document. This page distinguishes documented product functions from electrical details that require direct manufacturer confirmation.
This page combines the verified product identity, interface-controller role, four-channel architecture, source links, practical application guidance, and a structured comparison with related VSC7226 ordering options. It also highlights where engineers must verify package, pinout, timing, and lifecycle details before committing a design to production.
חלופות תחליף ישיר עבור VSC7226UI-06 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
VSC7226UI
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
VSC7226UI-01
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
VSC7226UI-02
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
VSC7226UI-03
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
VSC7226UI-04
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
VSC7226UI-06 מפרטים
| Channel Count | 4 channels |
| Product Type | Interface controller and transceiver |
| Data Conversion Functions | Parallel-to-serial and serial-to-parallel |
| Primary Data Path | 1 data path per channel |
| Signal Integrity | Signal-integrity-focused interface design |
| Primary Application | High-bandwidth data transmission |
| Supported System Link | Buses, backplanes, and connected subsystems |
| Data Handling | Efficient multi-channel data handling |
| Device Class | Semiconductor |
| Manufacturer | Microchip Technology |
| Product Family | VSC7226 |
מדריך תצורת פינים של VSC7226UI-06 standard
תצורת פינים עבור VSC7226UI-06 (מארזת standard). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור VSC7226UI-06.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
VSC7226UI-06 מתאים עבור 6 יישוםs: Network Interface Backplanes, Industrial Data Backplanes, High-Bandwidth Data Transmission, Infrastructure Communication Equipment, Parallel-to-Serial Subsystem Interconnects, Serial-to-Parallel Subsystem Interconnects.
Network Interface Backplanes
The VSC7226UI-06 fits network-interface backplanes that require several related parallel-to-serial or serial-to-parallel data paths. Its 4-channel architecture consolidates conversion functions within one interface controller instead of requiring four separate conversion devices. This is useful when a subsystem must exchange data between parallel board-level logic and serial communication paths across a backplane. Before implementation, engineers should confirm that the device's electrical interface, timing limits, and maximum data rate match the backplane traces, termination scheme, and receivers driving the links.
מומלץ
Industrial Data Backplanes
The VSC7226UI-06 is applicable to industrial subsystems that move multiple data streams across a board or chassis backplane. Four integrated channels provide a practical way to organize related parallel-to-serial and serial-to-parallel paths while maintaining a consistent interface-controller structure. Such a design can be used in automation, process-control, or communications equipment where subsystem logic and external line interfaces must be separated. Exact suitability depends on operating-temperature requirements, power behavior, clocking, and data-rate margins, which should be verified from the manufacturer documentation.
מומלץ
High-Bandwidth Data Transmission
The VSC7226UI-06 is designed for high-bandwidth transmission between buses, backplanes, and other connected subsystems. Its parallel-to-serial and serial-to-parallel conversion functions allow parallel subsystem data to be transferred efficiently toward serial communication paths. The four-channel arrangement supports multi-lane designs in which several related streams must cross a board-level boundary. The design team must select the correct device grade, verify timing margins, and preserve the manufacturer's recommended layout, decoupling, and termination practices to maintain reliable signal behavior.
מומלץ
Infrastructure Communication Equipment
Infrastructure equipment can use the VSC7226UI-06 to organize interface conversion between subsystem buses and external communication paths. Its 4-channel architecture supports efficient handling of multiple data streams, while its role as a dedicated interface controller separates data conversion from the host-processing function. This is valuable in networking and industrial infrastructure products where several board sections must exchange consistently formatted data. Final qualification should compare the exact ordering suffix against required data rate, power, temperature, lifecycle, and qualification requirements.
מומלץ
Parallel-to-Serial Subsystem Interconnects
The VSC7226UI-06 can serve parallel-to-serial subsystem interconnects where internal logic uses parallel data and an external link expects a serial representation. Four channels make the device suitable for grouped data paths that need coordinated interface behavior. Placing the conversion stage near the physical link can reduce the distance over which wide parallel buses must remain routed. The implementation must follow the manufacturer pin and timing guidance, and the selected suffix must provide all required operating and environmental conditions.
מומלץ
Serial-to-Parallel Subsystem Interconnects
The VSC7226UI-06 supports serial-to-parallel subsystem interconnects where incoming serial data must be presented to parallel processing logic. Its 4-channel architecture allows multiple incoming paths to use the same conversion-controller family, simplifying product-level organization and board partitioning. The device is particularly relevant to equipment that distributes data from communication or storage subsystems into parallel logic domains. Verify supported channel direction, data timing, electrical levels, and package details for the exact ordering code before beginning PCB implementation.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור VSC7226UI-06 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | VSC7226UI | VSC7226UI-01 | VSC7226UI-02 | VSC7226UI-03 | VSC7226UI-04 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Channel Count | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Data Conversion Functions | Parallel-to-serial and serial-to-parallel | Parallel-to-serial and serial-to-parallel | Parallel-to-serial and serial-to-parallel | Parallel-to-serial and serial-to-parallel | Parallel-to-serial and serial-to-parallel | Parallel-to-serial and serial-to-parallel |
| Primary Application | Buses, backplanes, and other subsystems | Buses, backplanes, and other subsystems | Buses, backplanes, and other subsystems | Buses, backplanes, and other subsystems | Buses, backplanes, and other subsystems | Buses, backplanes, and other subsystems |
| Ordering Suffix | UI-06 | UI | UI-01 | UI-02 | UI-03 | UI-04 |
מבדילים עיקריים
- Specific -06 ordering configuration within a four-channel interface family (לעומתVSC7226UI-01)
- Consolidated multi-channel conversion (לעומתVSC7226UI-02)
- Compatible family-level interface architecture (לעומתVSC7226UI-03)
הערות תכנון
Use the manufacturer reference layout and pin-description table when assigning the VSC7226UI-06 interface connections. Keep the high-speed signal paths short, continuous, and away from noisy switching nodes. If the device connects to a backplane, confirm the supported electrical interface and termination method before routing, because neither the required standard nor the maximum signal rate is identified in the retrieved product summaries.
Place decoupling and interface components exactly as shown in the applicable VSC7226 reference design. Route the four related channels with consistent geometry where possible, and match trace impedances to the physical interface when the family documentation specifies controlled-impedance routing. Do not infer pin functions from neighboring VSC7226 suffixes because ordering-code options can share a package while differing in grade or configuration.
Avoid treating every VSC7226 ordering suffix as electrically identical. Before a substitution, compare the VSC7226UI-06 against the candidate for channel direction, maximum data rate, timing, supply voltage, temperature grade, package, and pin assignment. The confirmed family description establishes the 4-channel conversion architecture, but it does not establish that suffix-specific timing and performance values are interchangeable.
מידע על תאימות
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact ordering code. Confirm these attributes and the product lifecycle status with Microchip Technology before production release.