W77E516A40PL - 40MHz 64KB Flash 8-Bit MCU | Nuvoton
MPN: W77E516A40PL ✓ AktifW77E516A40PL Genel Bakış
An 8051-compatible microcontroller is a CISC-based embedded-control device that executes instructions from internal program memory and uses ports, timers, serial communication, and interrupts to control external hardware. Within the product hierarchy, the W77E516 belongs to the W77 family of 8-bit microcontrollers, which combines the established 8051 instruction set with flash program memory for field-programmable embedded designs.
The W77E516A40PL combines a 40 MHz operating frequency with 64 KB of flash memory and 1 KB of internal RAM. Its four-cycle 8051 execution architecture supports faster instruction throughput than the original 12 MHz 8051 architecture. The 36 available I/O pins give embedded systems enough parallel signal capacity for control, monitoring, human-interface, and communications functions. A 5 V operating supply also aligns it with established 5 V industrial and legacy-control designs.
The W77E516 is instruction-set compatible with the 8052 and is pin compatible with 8052 designs, according to the Nuvoton W77E516A functional-description document. Its standard resources include four 8-bit I/O ports, three 16-bit timer/counters, a full-duplex serial port, and multiple interrupt sources. These resources support event counting, periodic control, serial data transfer, and responsive interrupt-driven firmware without requiring an external peripheral controller.
Typical uses include industrial equipment controllers, legacy 8051 system upgrades, serial-interface data collectors, timing modules, and compact embedded control boards. The 44-pin PLCC package is appropriate for designs that require a moderate pin count and surface-mount assembly while retaining access to the W77 family peripheral set. Firmware development can focus on the familiar 8051 programming model while using flash memory for program storage.
PCB designers should follow the manufacturer pin-description table when assigning signals and preserve the PLCC land pattern, power connections, decoupling requirements, and oscillator network. Supply-noise control and signal-integrity review are important because the 40 MHz operating rate gives less margin for long or poorly terminated interconnects than the original 12 MHz 8051 family. Confirm all peripheral multiplexing options before finalizing PCB routing.
This product record combines the W77E516A40PL electrical identity, package information, pin-compatible architecture, and application guidance with practical selection criteria. It also distinguishes verified device facts from parameters that require confirmation through the manufacturer datasheet, helping engineers evaluate legacy-control modernization and 8051-compatible embedded designs without relying on generic MCU assumptions.
Drop-in alternatifler için W77E516A40PL — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinW77E516A40PL Maksimum Değerlendirmeler & Elektriksel Özellikler
| Microcontroller Type | 8-bit W77 8051-compatible microcontroller |
| Azami Saat Hızı | 40 MHz |
| Program Memory Size | 64 KB flash (64K x 8) |
| RAM Size | 1 KB (1K x 8) |
| Number of I/O Pins | 36 pins |
| Besleme Gerilimi | 5 V |
| CPU Architecture | 8051-compatible CISC, 4-cycle execution |
| Paket | 44-pin PLCC |
| Montaj Türü | Surface mount |
| I/O Port Configuration | 4 x 8-bit I/O ports |
| Timer/Counter Resources | 3 x 16-bit timer/counter |
| Serial Interface | 1 full-duplex serial port |
| Instruction-Set Compatibility | 8052 instruction-set and pin compatible |
| Lead-Free Status | Pb-free |
W77E516A40PL 44-pin plcc Pin Yapısı Kılavuzu
W77E516A40PL (44-pin plcc paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: W77E516A40PL.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
W77E516A40PL için uygundur 6 uygulamas: Industrial Equipment Controller, Legacy 8051 System Upgrade, Serial Data Collection Module, Timing and Event-Counting Control, Embedded Interface and Human-Machine Panel, Embedded Communication Appliance.
Industrial Equipment Controller
The W77E516A40PL fits legacy industrial machinery that depends on an 8052-compatible controller but requires more program storage and clock performance than the original device. Its 40 MHz operating rate, 64 KB flash, and three 16-bit timers support machine sequencing, interval control, event counting, and periodic service tasks without an external timing IC. The four 8-bit I/O ports and 36 available I/O pins can distribute limit switches, actuator commands, status indicators, and interlock signals. Because the W77E516A is stated to be 8052 pin compatible, engineers can reuse a proven board architecture, while firmware engineers can retain much of the established 8051 code structure. Validate machine voltage levels, exposed timing, and the exact PLCC pin assignments during qualification.
Legacy 8051 System Upgrade
The W77E516A40PL provides a practical upgrade path for 8051-based controllers that need faster execution and embedded flash while retaining the familiar 8052 architecture. The device operates at up to 40 MHz and provides 64 KB of flash program memory, allowing larger state machines, diagnostics, and communication routines than a basic legacy MCU. The Nuvoton W77E516A documentation identifies instruction-set and pin compatibility with the 8052, which can reduce firmware and board changes during modernization. The 44-pin PLCC package may also ease replacement of an existing through-hole or surface-mount controller after footprint and peripheral multiplexing checks. Do not treat family compatibility as universal; compare oscillator pins, reset behavior, port functions, interrupt priorities, and timing in each revision.
Serial Data Collection Module
The W77E516A40PL can serve as the control core of a compact serial data collector because it combines a full-duplex serial port with a 40 MHz processor, 64 KB flash, and 1 KB RAM. Firmware can frame incoming records, validate checksums, maintain counters, and transfer summarized data over a host interface. The four 8-bit ports provide discrete handshaking lines and status outputs, while the three 16-bit timers can support baud-rate generation, periodic sampling, timeout management, and capture intervals. At 5 V, the device fits systems designed around legacy 5 V logic. Use disciplined grounding and short signal paths around the serial interface, and confirm the complete electrical timing and peripheral mapping from the manufacturer documentation before board release.
Timing and Event-Counting Control
The three 16-bit timer/counter resources in the W77E516A40PL make it well suited to precision event counting, delayed actuation, pulse measurement, and repeating industrial sequences. Its 40 MHz clock gives the firmware more execution headroom for filtering and control logic, while the 64 KB flash provides room for calibration tables, diagnostics, and operating modes. The 36 I/O pins can accept sensor or switch inputs and drive outputs, with the four port groups simplifying organization around different subsystems. A legacy 8052-compatible platform can often reuse timer and interrupt routines after porting. Verify input threshold levels, timer operating modes, interrupt latency, and maximum input frequency in the manufacturer electrical and timer documentation before finalizing the timing budget.
Embedded Interface and Human-Machine Panel
The W77E516A40PL can control keypad scanning, display selection, indicator logic, and service inputs in a compact human-machine interface built around 5 V logic. Its four 8-bit I/O ports provide a practical base for multiplexed keypad and display signals, while 64 KB flash allows local interface tables and diagnostic messages. The 40 MHz processing rate supports responsive debouncing and menu-state updates, and the full-duplex serial port can connect the panel controller to a main board or service interface. Because the PLCC package exposes 36 I/O pins, the design can support both controls and status functions without immediate multiplexing. Confirm port alternation functions, electrical levels, and pin directions directly from the manufacturer pin-description table.
Embedded Communication Appliance
The W77E516A40PL is appropriate for compact communication appliances that need a reliable 8051-compatible control engine, local protocol handling, and discrete interface signals. The full-duplex serial port supports a primary serial link, while the remaining ports can manage modem-control lines, indicators, configuration switches, and external transceivers. With 64 KB flash, 1 KB RAM, and a 40 MHz clock, firmware can combine protocol framing, local buffering, diagnostics, and supervisory logic in one device. The 5 V architecture also supports established industrial communications hardware. Choose external interface components according to voltage, isolation, and distance requirements, and use the manufacturer timing diagrams to validate baud-rate tolerance and signal levels in the assembled system.
Mühendislik referans verileri: W77E516A40PL — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Package | 44-pin PLCC |
| Brand | Nuvoton Technology Corporation |
| Microcontroller Type | 8-bit W77 8051-compatible microcontroller |
| Maximum Clock Frequency | 40 MHz |
| Program Memory | 64 KB flash |
| RAM Size | 1 KB |
| Number of I/O Pins | 36 pins |
| Supply Voltage | 5 V |
| CPU Architecture | 8051-compatible CISC, 4-cycle execution |
| Timer/Counter Resources | 3 x 16-bit timer/counter |
Tasarım Notları
Use the manufacturer 44-pin PLCC land pattern and assign every signal from the pin-description table. The W77E516A is described as 8052 pin compatible, but package variants can differ in speed, temperature grade, and peripheral options; verify the complete ordering code before releasing artwork. Place bypass capacitors at the power pins, connect the reset network as specified, and route oscillator traces away from high-speed switching and serial signals.
At 40 MHz, treat oscillator, clock-distribution, reset, and serial traces as timing-sensitive nets. Keep the crystal or external oscillator loop short, maintain a continuous ground reference, avoid routing clock signals beside the serial interface, and observe the manufacturer's rise-time and load recommendations. If the PCB has long industrial cable connections, place suitable protection and isolation at the connector rather than relying on the microcontroller pins for external surge-energy handling.
Design the 5 V rail for both the internal core and attached external loads rather than only the quiescent current. Include local high-frequency bypass at the supply pins, keep return-current paths short, and separate sensitive analog or communication circuitry from switching supplies. Check supply droop during I/O transitions because simultaneous port activity can create dynamic demand that is not visible in a static operating-current calculation.
Do not substitute a generic 8051, an unspecified W77 variant, or an MCU with the same PLCC lead count without a complete compatibility review. Confirm clock rating, flash and RAM capacity, timer resources, serial interface, interrupt vector behavior, oscillator pins, reset polarity, and boot or programming behavior. The 8052 compatibility statement makes the W77E516A40PL suitable for many legacy upgrades, but it does not guarantee that unrelated devices are drop-in replacements.
Uyumluluk Bilgisi
The Mouser product listing identifies W77E516A40PL as Pb-free. No explicit RoHS, REACH, halogen-free, AEC-Q100, or conflict-minerals declaration was identified, so those statuses remain unknown.