Nuvoton Technology Corporation

W77E516A40PL - 40MHz 64KB Flash 8-Bit MCU | Nuvoton

MPN: W77E516A40PL ✓ Hoạt động
5 V Vdss 44-pin PLCC Package 40 MHz Speed 64 KB flash (64K x 8) Memory
MOQ: 1 |

W77E516A40PL Tóm tắt

Nuvoton Technology Corporation W77E516A40PL is an 8-bit W77 8051-compatible microcontroller operating at up to 40 MHz, with 64 KB of flash program memory and 36 I/O pins in a 44-pin PLCC package. The device operates from a 5 V supply and supports the standard 8052-compatible resources, including four 8-bit I/O ports, three 16-bit timer/counters, a full-duplex serial port, and interrupt sources.

An 8051-compatible microcontroller is a CISC-based embedded-control device that executes instructions from internal program memory and uses ports, timers, serial communication, and interrupts to control external hardware. Within the product hierarchy, the W77E516 belongs to the W77 family of 8-bit microcontrollers, which combines the established 8051 instruction set with flash program memory for field-programmable embedded designs.

The W77E516A40PL combines a 40 MHz operating frequency with 64 KB of flash memory and 1 KB of internal RAM. Its four-cycle 8051 execution architecture supports faster instruction throughput than the original 12 MHz 8051 architecture. The 36 available I/O pins give embedded systems enough parallel signal capacity for control, monitoring, human-interface, and communications functions. A 5 V operating supply also aligns it with established 5 V industrial and legacy-control designs.

The W77E516 is instruction-set compatible with the 8052 and is pin compatible with 8052 designs, according to the Nuvoton W77E516A functional-description document. Its standard resources include four 8-bit I/O ports, three 16-bit timer/counters, a full-duplex serial port, and multiple interrupt sources. These resources support event counting, periodic control, serial data transfer, and responsive interrupt-driven firmware without requiring an external peripheral controller.

Typical uses include industrial equipment controllers, legacy 8051 system upgrades, serial-interface data collectors, timing modules, and compact embedded control boards. The 44-pin PLCC package is appropriate for designs that require a moderate pin count and surface-mount assembly while retaining access to the W77 family peripheral set. Firmware development can focus on the familiar 8051 programming model while using flash memory for program storage.

PCB designers should follow the manufacturer pin-description table when assigning signals and preserve the PLCC land pattern, power connections, decoupling requirements, and oscillator network. Supply-noise control and signal-integrity review are important because the 40 MHz operating rate gives less margin for long or poorly terminated interconnects than the original 12 MHz 8051 family. Confirm all peripheral multiplexing options before finalizing PCB routing.

This product record combines the W77E516A40PL electrical identity, package information, pin-compatible architecture, and application guidance with practical selection criteria. It also distinguishes verified device facts from parameters that require confirmation through the manufacturer datasheet, helping engineers evaluate legacy-control modernization and 8051-compatible embedded designs without relying on generic MCU assumptions.

Bộ thay thế dễ dàng lắp đặt cho W77E516A40PL — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

W77E516A40PL Tỷ lệ tối đa & tính chất điện

Microcontroller Type 8-bit W77 8051-compatible microcontroller
Tần số xung maksimum 40 MHz
Program Memory Size 64 KB flash (64K x 8)
RAM Size 1 KB (1K x 8)
Number of I/O Pins 36 pins
Điện áp cung cấp 5 V
CPU Architecture 8051-compatible CISC, 4-cycle execution
Hộp 44-pin PLCC
Kiểu lắp đặt Surface mount
I/O Port Configuration 4 x 8-bit I/O ports
Timer/Counter Resources 3 x 16-bit timer/counter
Serial Interface 1 full-duplex serial port
Instruction-Set Compatibility 8052 instruction-set and pin compatible
Lead-Free Status Pb-free

Hướng dẫn cấu hình chân W77E516A40PL 44-pin plcc

Cấu hình chân cho W77E516A40PL (44-pin plcc gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 44-pin plcc cho W77E516A40PL

Không có dữ liệu chân cụ thể sẵn có cho W77E516A40PL.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

W77E516A40PL phù hợp cho 6 Áp dụngs: Industrial Equipment Controller, Legacy 8051 System Upgrade, Serial Data Collection Module, Timing and Event-Counting Control, Embedded Interface and Human-Machine Panel, Embedded Communication Appliance.

🏭

Industrial Equipment Controller

The W77E516A40PL fits legacy industrial machinery that depends on an 8052-compatible controller but requires more program storage and clock performance than the original device. Its 40 MHz operating rate, 64 KB flash, and three 16-bit timers support machine sequencing, interval control, event counting, and periodic service tasks without an external timing IC. The four 8-bit I/O ports and 36 available I/O pins can distribute limit switches, actuator commands, status indicators, and interlock signals. Because the W77E516A is stated to be 8052 pin compatible, engineers can reuse a proven board architecture, while firmware engineers can retain much of the established 8051 code structure. Validate machine voltage levels, exposed timing, and the exact PLCC pin assignments during qualification.

🔧

Legacy 8051 System Upgrade

The W77E516A40PL provides a practical upgrade path for 8051-based controllers that need faster execution and embedded flash while retaining the familiar 8052 architecture. The device operates at up to 40 MHz and provides 64 KB of flash program memory, allowing larger state machines, diagnostics, and communication routines than a basic legacy MCU. The Nuvoton W77E516A documentation identifies instruction-set and pin compatibility with the 8052, which can reduce firmware and board changes during modernization. The 44-pin PLCC package may also ease replacement of an existing through-hole or surface-mount controller after footprint and peripheral multiplexing checks. Do not treat family compatibility as universal; compare oscillator pins, reset behavior, port functions, interrupt priorities, and timing in each revision.

🌐

Serial Data Collection Module

The W77E516A40PL can serve as the control core of a compact serial data collector because it combines a full-duplex serial port with a 40 MHz processor, 64 KB flash, and 1 KB RAM. Firmware can frame incoming records, validate checksums, maintain counters, and transfer summarized data over a host interface. The four 8-bit ports provide discrete handshaking lines and status outputs, while the three 16-bit timers can support baud-rate generation, periodic sampling, timeout management, and capture intervals. At 5 V, the device fits systems designed around legacy 5 V logic. Use disciplined grounding and short signal paths around the serial interface, and confirm the complete electrical timing and peripheral mapping from the manufacturer documentation before board release.

⏱️

Timing and Event-Counting Control

The three 16-bit timer/counter resources in the W77E516A40PL make it well suited to precision event counting, delayed actuation, pulse measurement, and repeating industrial sequences. Its 40 MHz clock gives the firmware more execution headroom for filtering and control logic, while the 64 KB flash provides room for calibration tables, diagnostics, and operating modes. The 36 I/O pins can accept sensor or switch inputs and drive outputs, with the four port groups simplifying organization around different subsystems. A legacy 8052-compatible platform can often reuse timer and interrupt routines after porting. Verify input threshold levels, timer operating modes, interrupt latency, and maximum input frequency in the manufacturer electrical and timer documentation before finalizing the timing budget.

📺

Embedded Interface and Human-Machine Panel

The W77E516A40PL can control keypad scanning, display selection, indicator logic, and service inputs in a compact human-machine interface built around 5 V logic. Its four 8-bit I/O ports provide a practical base for multiplexed keypad and display signals, while 64 KB flash allows local interface tables and diagnostic messages. The 40 MHz processing rate supports responsive debouncing and menu-state updates, and the full-duplex serial port can connect the panel controller to a main board or service interface. Because the PLCC package exposes 36 I/O pins, the design can support both controls and status functions without immediate multiplexing. Confirm port alternation functions, electrical levels, and pin directions directly from the manufacturer pin-description table.

📡

Embedded Communication Appliance

The W77E516A40PL is appropriate for compact communication appliances that need a reliable 8051-compatible control engine, local protocol handling, and discrete interface signals. The full-duplex serial port supports a primary serial link, while the remaining ports can manage modem-control lines, indicators, configuration switches, and external transceivers. With 64 KB flash, 1 KB RAM, and a 40 MHz clock, firmware can combine protocol framing, local buffering, diagnostics, and supervisory logic in one device. The 5 V architecture also supports established industrial communications hardware. Choose external interface components according to voltage, isolation, and distance requirements, and use the manufacturer timing diagrams to validate baud-rate tolerance and signal levels in the assembled system.

What is the W77E516A40PL microcontroller?
The W77E516A40PL is an 8-bit W77 8051-compatible flash microcontroller with a maximum clock frequency of 40 MHz, 64 KB of program memory, 1 KB of RAM, and 36 I/O pins. According to the Nuvoton W77E516A functional-description document, the device is instruction-set and pin compatible with the 8052 and includes four 8-bit I/O ports, three 16-bit timer/counters, a full-duplex serial port, and multiple interrupt sources. It is packaged in a 44-pin PLCC for surface-mount industrial and legacy embedded-control designs.
What is the operating voltage of W77E516A40PL?
The W77E516A40PL operates from a 5 V supply. Its specified program memory is 64 KB flash, organized as 64K x 8, while its internal RAM is 1 KB, organized as 1K x 8. The Mouser product listing identifies the part as a 5 V, 40 MHz 8-bit microcontroller, and the manufacturer functional description identifies the W77E516 as an 8052-compatible device. Use the manufacturer electrical-characteristics table when determining the exact DC, AC, and absolute-maximum limits for a specific design.
Where can I download the W77E516A40PL datasheet PDF?
The W77E516A40PL datasheet and functional documentation can be downloaded from the Nuvoton resource page at https://www.nuvoton.com/export/resource-files/W77E516Ai_Modify.pdf. The document describes the W77E516A family, including its 8052 compatibility, four 8-bit I/O ports, three 16-bit timer/counters, full-duplex serial port, and interrupt resources. Use the pin-description table, memory map, electrical characteristics, and oscillator guidance in that document for final schematic and PCB verification.
Where can I find the W77E516A40PL pinout?
The W77E516A40PL pinout is identified in the manufacturer W77E516A documentation, with the physical device specified as a 44-pin PLCC. Because the device is described as 8052 pin compatible, a legacy 8052 schematic is useful for architecture review, but the manufacturer pin-description table remains the controlling reference for port multiplexing, reset, oscillator, power, and programming assignments. Use the PLCC land pattern and verify every pin against the latest manufacturer document before fabrication.
What are the key specifications of W77E516A40PL that engineers should know?
The W77E516A40PL combines a 40 MHz clock, 64 KB flash, 1 KB RAM, and 36 I/O pins in a 44-pin PLCC package. According to the Nuvoton W77E516A functional description, it retains 8052 instruction-set and pin compatibility while providing four 8-bit ports, three 16-bit timers, a full-duplex serial port, and interrupt sources. These features make it particularly relevant to established 8051-family platforms that need faster execution and embedded flash while retaining legacy software and hardware compatibility.
Can W77E516A40PL replace an 8052 microcontroller?
The W77E516A40PL is designed as an 8052-compatible upgrade because the manufacturer states that the W77E516 is pin compatible and instruction-set compatible with the 8052. Its 40 MHz clock and 64 KB flash provide substantially more operating and program-memory capacity than a basic original 8052. Before replacing a device, verify oscillator configuration, reset behavior, peripheral functions, port multiplexing, supply conditions, and timing requirements against the manufacturer pin and electrical tables.
What can replace the W77E516A40PL on the same PCB?
No verified pin-compatible replacement MPN was identified for the W77E516A40PL. The W77E516A40PL is a 44-pin PLCC device with a 40 MHz rating, 64 KB flash, 1 KB RAM, and 36 I/O pins; a generic 8051 or unspecified W78-family MCU is not necessarily a drop-in replacement. Use the Request a Quote form on this page to discuss sourcing and replacement options, and require a manufacturer comparison covering the 44-pin PLCC footprint, peripheral multiplexing, oscillator arrangement, memory map, timing, and electrical limits.
Is W77E516A40PL the same as a generic W77E516A microcontroller?
The W77E516A40PL is a specific ordering configuration within the W77E516A family, with a 40 MHz maximum frequency and a 44-pin PLCC package. Other W77E516A configurations may differ in speed grade, package, temperature grade, or ordering suffix, so the family name alone does not establish interchangeability. A valid substitution must match the PLCC footprint, supply voltage, clock requirements, flash capacity, RAM capacity, timer resources, serial interface, interrupt behavior, and all package pin assignments.
When should I choose W77E516A40PL over a newer 8-bit MCU?
Choose the W77E516A40PL when an existing design depends on 8052 pin and instruction compatibility, a 44-pin PLCC footprint, 5 V operation, and a proven 8051-family software base. Its 40 MHz clock, 64 KB flash, and three 16-bit timers can extend the life of industrial equipment or legacy control products without redesigning the processor architecture. A newer MCU is preferable when the board can be redesigned and requirements include substantially more memory, lower power, wider peripheral integration, modern security, or a smaller package.
Is W77E516A40PL suitable for industrial control applications?
The W77E516A40PL is suitable for many 5 V industrial-control tasks because it combines 40 MHz operation, 64 KB flash, 36 I/O pins, three 16-bit timers, a serial port, and 8052-compatible hardware and software. Its PLCC package supports compact surface-mount assemblies, and its legacy compatibility simplifies maintenance of installed equipment. Validate the exact operating-temperature grade, electrical limits, EMC requirements, isolation, and environmental certification for the target machine before releasing it into production.
What are the power and thermal considerations for W77E516A40PL?
Power-rail design for the W77E516A40PL should account for a 5 V operating supply, the 40 MHz core speed, and the load presented by external I/O and peripherals. The exact supply-current limits and junction-temperature ratings must be taken from the manufacturer electrical-characteristics table because they are not stated in the product-page excerpts. Place the required bypass capacitors close to the supply and ground pins, provide a clean reset design, and include thermal copper appropriate to the PLCC package and board environment.
Where can I buy W77E516A40PL online and check its price?
Use the Request a Quote form on this page to request current W77E516A40PL price, stock status, minimum order quantity, and lead time for your required quantity and packaging. The part is listed as an Nuvoton Technology Corporation device by major component distributors and as a Winbond-family W77E516A40PL in several catalog records. A quotation allows the order to be matched against the exact 44-pin PLCC ordering code while avoiding ambiguity with other package, speed, or temperature configurations.
What is the lead time for W77E516A40PL?
The current production lead time for W77E516A40PL is obtained through the Request a Quote form on this page. Lead time can vary with order quantity, scheduled factory allocation, packaging requirements, and the chosen shipment destination, so a generic listing statement is not sufficient for production planning. When requesting a quotation, specify the required quantity, target date, and whether reel, tray, or another approved delivery format is required.
Is W77E516A40PL in stock?
Current W77E516A40PL inventory is confirmed through the Request a Quote form on this page because stock changes continuously with order activity. The distributor listings identify the exact MPN as an available catalog component, but a listing alone does not guarantee a particular quantity at the time of purchase. Request a quotation for the required quantity and include your delivery schedule so the allocation and expected lead time can be confirmed against the exact 44-pin PLCC device.
What development tools are compatible with W77E516A40PL?
The W77E516A40PL requires an 8051-family-compatible development environment that supports the W77E516A memory map, peripherals, flash programming, and 44-pin PLCC device selection. The manufacturer documentation identifies standard 8052-compatible resources, including four 8-bit I/O ports, three 16-bit timers, a full-duplex serial port, and interrupt sources. Select a debugger, programmer, and emulator whose device database includes the exact W77E516A40PL configuration, and verify programming-voltage, clock, reset, and package support before starting production engineering.
Does W77E516A40PL comply with RoHS and REACH?
The Mouser product listing identifies the W77E516A40PL as Pb-free, but an explicit RoHS or REACH declaration is not included in the available product information. The compliance fields therefore remain unknown rather than assuming a declaration. Request the current manufacturer material-compliance statement through the Request a Quote form and review the exact family ordering configuration before using the part in equipment subject to RoHS, REACH, halide-free, or conflict-minerals procurement requirements.

Dữ liệu tham khảo kỹ thuật cho W77E516A40PL — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the W77E516A40PL when maintaining or modernizing an 8052-based system where software and board compatibility are important. Its 40 MHz clock, 64 KB flash, 1 KB RAM, three 16-bit timers, full-duplex serial port, and 36 I/O pins provide meaningful performance and memory headroom while retaining the established 8052 instruction and pin architecture. The 44-pin PLCC package also suits surface-mount industrial equipment with moderate I/O demand. Select a newer MCU when the design can be redesigned and needs substantially more memory, smaller packaging, modern low-power operation, stronger security, or broader peripheral integration. Do not choose a generic W77 or 8051 replacement solely by family name or lead count; require an exact comparison of speed grade, memory, peripheral multiplexing, clock arrangement, reset behavior, timing, and the 44-pin PLCC footprint. For a same-footprint substitution, request a manufacturer-supported cross-reference and schematic-level review.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Package 44-pin PLCC
Brand Nuvoton Technology Corporation
Microcontroller Type 8-bit W77 8051-compatible microcontroller
Maximum Clock Frequency 40 MHz
Program Memory 64 KB flash
RAM Size 1 KB
Number of I/O Pins 36 pins
Supply Voltage 5 V
CPU Architecture 8051-compatible CISC, 4-cycle execution
Timer/Counter Resources 3 x 16-bit timer/counter

Ghi chú thiết kế

Use the manufacturer 44-pin PLCC land pattern and assign every signal from the pin-description table. The W77E516A is described as 8052 pin compatible, but package variants can differ in speed, temperature grade, and peripheral options; verify the complete ordering code before releasing artwork. Place bypass capacitors at the power pins, connect the reset network as specified, and route oscillator traces away from high-speed switching and serial signals.

At 40 MHz, treat oscillator, clock-distribution, reset, and serial traces as timing-sensitive nets. Keep the crystal or external oscillator loop short, maintain a continuous ground reference, avoid routing clock signals beside the serial interface, and observe the manufacturer's rise-time and load recommendations. If the PCB has long industrial cable connections, place suitable protection and isolation at the connector rather than relying on the microcontroller pins for external surge-energy handling.

Design the 5 V rail for both the internal core and attached external loads rather than only the quiescent current. Include local high-frequency bypass at the supply pins, keep return-current paths short, and separate sensitive analog or communication circuitry from switching supplies. Check supply droop during I/O transitions because simultaneous port activity can create dynamic demand that is not visible in a static operating-current calculation.

Do not substitute a generic 8051, an unspecified W77 variant, or an MCU with the same PLCC lead count without a complete compatibility review. Confirm clock rating, flash and RAM capacity, timer resources, serial interface, interrupt vector behavior, oscillator pins, reset polarity, and boot or programming behavior. The 8052 compatibility statement makes the W77E516A40PL suitable for many legacy upgrades, but it does not guarantee that unrelated devices are drop-in replacements.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Yes
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The Mouser product listing identifies W77E516A40PL as Pb-free. No explicit RoHS, REACH, halogen-free, AEC-Q100, or conflict-minerals declaration was identified, so those statuses remain unknown.

Dữ liệu được xác minh vào: 2026-11-11 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

W77E516A40PL datasheet W77E516A40PL datasheet pdf W77E516A40PL pinout W77E516A40PL specifications Nuvoton W77E516A40PL W77E516A40PL 40MHz 64KB flash W77E516A40PL 44 pin PLCC W77E516A40PL equivalent W77E516A40PL replacement W77E516A40PL cross reference W77E516A40PL price W77E516A40PL stock W77E516A40PL 8052 replacement W77E516A40PL application circuit

Các bộ phận và thuật ngữ liên quan

Nuvoton Technology Corporation Winbond W77E516A40PL W77E516A W77 family 8051-compatible microcontroller 8052-compatible microcontroller 8-bit microcontroller CISC architecture embedded microcontroller semiconductor flash program memory static RAM general-purpose I/O timer/counter full-duplex serial port interrupt controller PLCC-44 surface-mount package 40 MHz clock 64 KB flash 1 KB RAM 5 V logic industrial control legacy system upgrade
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ