XA3S200-4TQG144Q - 200K Gate Automotive FPGA | AMD
MPN: XA3S200-4TQG144Q ✓ AktifXA3S200-4TQG144Q Genel Bakış
A field-programmable gate array is a semiconductor whose digital logic and interconnect are configured after manufacture. An FPGA sits within the programmable-logic hierarchy, combining configurable logic blocks, block RAM, programmable I/O, and dedicated arithmetic resources. This architecture allows automotive designers to consolidate control logic, interface adaptation, data acquisition, and protocol handling into one device while retaining field-update flexibility.
The Spartan-3 XA implementation provides 4,320 logic elements organized as 1,920 adaptive logic modules, along with 221,184 bits of RAM. Published device information identifies 97 configurable I/O and a maximum data transfer rate of 622 Mb/s per I/O. The device supports seventeen single-ended and seven differential signal standards, including LVDS, and uses digitally controlled impedance for board-level signal control. These features make it useful where multiple logic functions and external interfaces would otherwise require several discrete devices.
The XA3S200 family combines a 90 nm fabrication process with dedicated 18×18 multipliers and a 1.2 V core architecture. These resources support parallel data processing, sensor conditioning, display control, vehicle-network adaptation, and embedded control functions. Programming and configuration are managed through the Spartan-3 family programming interface, while the automotive suffix identifies the vehicle-oriented qualification grade.
Typical automotive uses include body and comfort control modules, infotainment interface logic, central gateway adaptation, sensor aggregation, diagnostic circuitry, and industrial vehicle controls. The 144-pin gull-wing package supports conventional PCB assembly, while the combination of programmable logic, block RAM, multipliers, and differential I/O reduces component count in systems requiring several digital functions.
Designers should preserve the device’s specified supply tolerance and provide appropriate decoupling for both core and I/O supplies. Configuration storage, startup sequencing, clocking, and automotive transient requirements must be reviewed in the manufacturer datasheet. PCB layout should also account for high-speed I/O, LVDS pairs, impedance control, and thermal performance rather than treating the package as a generic low-speed TQFP.
This product page combines device specifications, package and sourcing details, qualified same-family drop-in alternatives, and practical guidance for automotive FPGA design. It also distinguishes verified electrical characteristics from parameters that require confirmation from the complete manufacturer datasheet before schematic release or production use.
Drop-in alternatifler için XA3S200-4TQG144Q — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller XA3S200-4TQG144Q (aynı form faktörü ve ayağa oturma) — farklı olan Package, Temperature Grade.
XA3S200-4TQG144I
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XA3S200-3TQG144Q
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
XA3S200-2TQG144Q
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
XA3S200-1TQG144Q
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
XA3S200-4TQG144C
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
XA3S200-4TQG144Q Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | Spartan-3 XA field-programmable gate array |
| System Gates | 200,000 gates |
| Logic Elements | 4,320 logic elements |
| Adaptive Logic Modules | 1,920 ALMs |
| Block RAM | 221,184 bits |
| Configurable I/O | 97 I/O |
| Maximum Data Transfer Rate | 622 Mb/s per I/O |
| Core Supply Voltage | 1.2 V |
| Operating Supply Voltage Range | 1.14 V to 1.26 V |
| Fabrication Process | 90 nm |
| Multiplier Resource | 18×18 dedicated multiplier |
| Single-Ended Signal Standards | 17 standards |
| Differential Signal Standards | 7 standards, including LVDS |
| Impedance Control | Digitally controlled impedance |
| Paket | 144-pin LQFP, gull-wing lead form |
| Automotive Qualification | AEC-Q100 qualified |
| Temperature Grade | Automotive grade |
XA3S200-4TQG144Q 144-pin lqfp, gull-wing lead form Pin Yapısı Kılavuzu
XA3S200-4TQG144Q (144-pin lqfp, gull-wing lead form paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: XA3S200-4TQG144Q.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
XA3S200-4TQG144Q için uygundur 6 uygulamas: Automotive Body Control Logic, Vehicle Sensor Aggregation, Central Gateway Adaptation, Automotive Display Interface, Powertrain Control Assistance, Diagnostics and Functional Safety Support.
Automotive Body Control Logic
The XA3S200-4TQG144Q suits body-control modules that combine switch inputs, actuator sequencing, diagnostic logic, and communication interfaces in one programmable device. Its 4,320 logic elements and 1,920 adaptive logic modules provide parallel digital processing, while 221,184 bits of block RAM can hold configuration tables, diagnostic data, and state machines. The 97 configurable I/O reduce the need for external glue logic when connecting sensors and discrete actuators. The automotive Q designation is the key advantage for vehicle programs requiring AEC-Q100 qualification, although transient protection and diagnostic coverage must be designed around the device rather than assumed to be automatic.
Önerilen
Vehicle Sensor Aggregation
The XA3S200-4TQG144Q can consolidate multiple automotive sensor inputs before they are forwarded to a vehicle network or higher-level controller. Its dedicated 18×18 multiplier resources support parallel arithmetic, filtering, and scaling operations, while the block RAM provides storage for sampled data and calibration tables. With 97 configurable I/O, the device can serve as the central routing and conditioning element for pressure, temperature, position, and occupancy sensing subsystems. The 1.14 V to 1.26 V core range matches low-voltage digital logic, and the 144-pin LQFP supports conventional automotive PCB assembly practices.
Önerilen
Central Gateway Adaptation
A central gateway benefits from the XA3S200-4TQG144Q when it must translate between vehicle communication domains, validate messages, and maintain protocol state. The FPGA's 4,320 logic elements can implement parallel protocol engines and arbitration logic, while 221,184 bits of block RAM can support buffering and routing tables. Published information identifies support for 17 single-ended and seven differential standards, including LVDS, which provides options for compatible high-speed links. The automotive qualification supports deployment in harsh vehicle environments, but network timing, fault containment, and security behavior must be verified at the system level before production release.
Önerilen
Automotive Display Interface
The XA3S200-4TQG144Q is suitable for display timing, pixel-stream generation, control, and test-logic functions in vehicle infotainment or instrument systems. Its programmable logic supports timing generation and interface adaptation, while the 97 I/O provide substantial connectivity for control signals and data lanes. Dedicated multipliers and block RAM can assist with scaling, graphics processing, and frame-buffer functions without relying on a hard-coded accelerator. Published performance of up to 622 Mb/s per I/O gives designers a defined basis for selecting compatible single-ended or differential signaling, provided that board-level impedance, clocking, and signal-integrity constraints are satisfied.
Önerilen
Powertrain Control Assistance
The XA3S200-4TQG144Q can support auxiliary powertrain control tasks where deterministic parallel logic, data capture, and fault reporting are required. The dedicated 18×18 multipliers accelerate multiply-accumulate operations used in sampling, filtering, and compensation functions, while the 4,320 logic elements accommodate control sequencing and hardware diagnostics. Its AEC-Q100 qualification makes it more appropriate for automotive environments than the industrial and commercial same-package alternatives. It should not replace a safety-certified controller without the required system assessment, redundancy analysis, and validation against the applicable automotive safety requirements.
Önerilen
Diagnostics and Functional Safety Support
The XA3S200-4TQG144Q can implement redundant monitoring, programmable fault detection, signature checking, and diagnostic state machines alongside a primary control function. Its 1,920 adaptive logic modules provide flexible combinational and sequential resources, while 221,184 bits of block RAM can store reference values, event histories, and fault tables. The Q-grade automotive identity is important when the diagnostic subsystem must share the environmental qualification expectations of the surrounding vehicle electronics. Actual safety integrity depends on the architecture, diagnostic coverage, freedom-from-interference analysis, and validation of the complete vehicle system rather than the FPGA qualification alone.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: XA3S200-4TQG144Q — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | XA3S200-4TQG144I | XA3S200-3TQG144Q | XA3S200-2TQG144Q | XA3S200-1TQG144Q | XA3S200-4TQG144C |
|---|---|---|---|---|---|---|
| Package | 144-pin LQFP | 144-pin LQFP | 144-pin LQFP | 144-pin LQFP | 144-pin LQFP | 144-pin LQFP |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| System Gates | 200,000 gates | 200,000 gates | 200,000 gates | 200,000 gates | 200,000 gates | 200,000 gates |
| Logic Elements | 4,320 logic elements | 4,320 logic elements | 4,320 logic elements | 4,320 logic elements | 4,320 logic elements | 4,320 logic elements |
| Adaptive Logic Modules | 1,920 ALMs | 1,920 ALMs | 1,920 ALMs | 1,920 ALMs | 1,920 ALMs | 1,920 ALMs |
| Block RAM | 221,184 bits | 221,184 bits | 221,184 bits | 221,184 bits | 221,184 bits | 221,184 bits |
| Configurable I/O | 97 I/O | 97 I/O | 97 I/O | 97 I/O | 97 I/O | 97 I/O |
| Speed Grade | 4 | 4 | 3 | 2 | 1 | 4 |
| Qualification Suffix | Q automotive grade | I industrial grade | Q automotive grade | Q automotive grade | Q automotive grade | C commercial grade |
Ana Farklılayıcılar
- Retains automotive qualification for vehicle programs (karşılaştırma:XA3S200-4TQG144I)
- Provides the highest listed speed grade in this comparison (karşılaştırma:XA3S200-3TQG144Q)
- Maintains the same logic and memory capacity across lower-speed migrations (karşılaştırma:XA3S200-1TQG144Q)
- Combines programmable logic with dedicated arithmetic resources (karşılaştırma:XC3S200-4TQG144C)
Tasarım Notları
Design the core rail around the specified 1.14 V to 1.26 V operating range and place the required bypass capacitors close to the supply and ground pins. Separate core and I/O supply requirements must be followed from the manufacturer datasheet, including allowable voltage combinations and sequencing. Do not derive decoupling values only from generic FPGA practice; confirm ESR, ripple, and startup requirements for the selected configuration and automotive validation plan.
Preserve the 144-pin LQFP land pattern, pad dimensions, solder-mask clearance, and copper reflow geometry specified for the device. Route each power connection directly to its relevant pins with minimal loop area, and provide a continuous ground reference beneath the device where practical. Review exposed pad and thermal-via requirements in the package drawing, particularly if the design uses the maximum supported clocking and I/O activity.
Treat LVDS and other differential interfaces as controlled-impedance nets. Match trace lengths according to the selected I/O standard, maintain consistent spacing from unrelated signals, and avoid right-angle routing where substitution affects return paths. Digitally controlled impedance does not eliminate the need for an accurate PCB stack-up and controlled board geometry. Validate eye patterns, skew, and timing margin with the actual board and selected configuration.
Do not substitute the 208-pin XA3S200-4PQG208Q for this device on an unchanged PCB because the terminal count and land pattern differ. Also distinguish the Q, I, and C qualification suffixes: matching the FPGA architecture and package does not establish equivalent automotive qualification. After changing speed grade or qualification suffix, rerun timing analysis, configuration checks, I/O-standard validation, and system qualification rather than assuming drop-in interchangeability.
Validate junction temperature using the maximum expected clock, I/O activity, supply voltage, and ambient temperature. The 144-pin LQFP relies on board copper for thermal spreading, so a PCB assembled without adequate thermal pathways can perform differently from a high-copper test coupon. Compare estimated junction temperature against the device limit and include enclosure temperature rise, neighboring heat sources, and automotive worst-case conditions in the thermal assessment.
Uyumluluk Bilgisi
AMD product information identifies the XA3S200-4TQG144Q as AEC-Q100 qualified. RoHS, REACH, lead-free, halogen-free, and conflict-mineral status require confirmation from the current manufacturer product documentation.