Xilinx

XC2C256-7PQG208I - 256-Macrocell 1.8V CPLD | Xilinx

MPN: XC2C256-7PQG208I ✗ Son Kullanım Zamanı
1.8 V Vdss 13 uA Id 208-pin PQFP Package -7 Speed
MOQ: 1 |

XC2C256-7PQG208I Genel Bakış

The Xilinx XC2C256-7PQG208I is a CoolRunner-II complex programmable logic device with 256 macrocells, 173 user I/O, and in-system programmability, optimized for 1.8 V systems in a 208-pin PQFP package. It offers pin-to-pin delays as fast as 5.7 ns and a quiescent current as low as 13 uA.

A CPLD is a programmable logic device that combines programmable AND/OR logic structures, input blocks, output logic, and embedded memory into a reconfigurable digital integrated circuit. Within the semiconductor hierarchy, a CPLD is a programmable-logic IC, a member of the FPGA and CPLD family, and a practical alternative to a small FPGA when deterministic routing, nonvolatile configuration, and relatively simple logic integration are priorities.

The XC2C256 part provides a useful density level for control logic, bus arbitration, protocol interfaces, address decoding, glue logic, and embedded storage functions. Programmable output features include slew-rate limiting, bus hold, pull-up, open-drain, and programmable-ground configurations. Individual input pins can also use a Schmitt-trigger function, which helps improve noise tolerance on slowly changing or externally generated signals.

The device uses a 0.18-micron CMOS CPLD architecture designed for effective logic synthesis. Its 256 macrocells provide substantially more logic capacity than small legacy GAL devices, while in-system programmability allows configuration or field updates without removing the device from its circuit board. The -7 suffix denotes a specific speed grade, while the I suffix identifies the industrial-oriented ordering variant.

Typical implementations include industrial control and data-acquisition systems, embedded communications interfaces, legacy peripheral expansion, sensor conditioning, motor-control sequencing, and compact programmable logic subsystems. Its 173 I/O count is particularly useful for designs requiring numerous external connections, parallel buses, or mixed digital control and status signals.

PCB design should account for the 208-pin PQFP footprint, its lead pitch, exposed supply requirements, and the package's thermal behavior. Decoupling capacitors should be placed close to the supply pins, programming and configuration traces should remain short and well controlled, and unused inputs should be terminated according to the manufacturer's system-design guidance.

This page combines the CoolRunner-II DS094 technical details with application guidance, same-footprint alternatives, comparison parameters, and practical design considerations. These engineering references help engineers evaluate whether the XC2C256-7PQG208I remains suitable for an existing design or a controlled modernization without obscuring the distinctions between speed, temperature, and ordering variants.

Drop-in alternatifler için XC2C256-7PQG208I — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller XC2C256-7PQG208I (aynı form faktörü ve ayağa oturma) — farklı olan Device Type, Package, Quiescent Current, Process Technology, Configuration Memory.

AMD
Device Type: CPLD (Complex Programmable Logic Device)
Package: 208-pin PQFP (PQ208, FQFP, gull-wing)
Process Technology: 0.18 um CMOS
İle Karşılaştır XC2C256-7PQG208I →
AMD
Device Type: CPLD (Complex Programmable Logic Device)
Package: 208-pin PQFP (FQFP), square, gull-wing
Quiescent Current: 13 uA (as low as)
İle Karşılaştır XC2C256-7PQG208I →
AMD
Device Type: Complex Programmable Logic Device (CPLD)
Quiescent Current: As low as 13 µA
Process Technology: 0.18 µm CMOS
İle Karşılaştır XC2C256-7PQG208I →

XC2C256-7PQ208I

✅ Yerleştirme
AMD
📦 PQFP-208
AMD (Xilinx) · CoolRunner-II · CPLD (Complex Programmable Logic Device) · 256 · 6000 · -7 · 5.7 ns (min fast case per family features) · 6.7 ns

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

XC2C256-7PQG208C

✅ Yerleştirme
AMD
📦 PQFP-208
Complex Programmable Logic Device (CPLD) · CoolRunner-II · 256 macrocells · Up to 6,000 gates · 173 I/O · 1.7 V to 1.9 V · 1.8 V · 5.7 ns

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

XC2C256-7PQ208C

✅ Yerleştirme
AMD
📦 PQFP-208
XC2C256-7PQ208C · CoolRunner-II · CPLD (Complex Programmable Logic Device) · 256 · 6,000 · 152 MHz · -7 · 1.8 V nominal (1.7 V to 1.9 V)

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

XC2C256-6PQG208C

✅ Yerleştirme
📦 PQFP-208
Same 256-macrocell, 173-I/O architecture and package; -6 speed grade versus the target -7 grade, with C commercial ordering suffix versus I industrial.

📋 Katalogda Olmayan Referans Alternatifi

XC2C256-7PQG208I Maksimum Değerlendirmeler & Elektriksel Özellikler

Device Type CoolRunner-II complex programmable logic device
Macrocells 256
User I/O 173
Programming Type In-system programmable
Optimized Supply Voltage 1.8 V
Maximum Pin-to-Pin Delay 5.7 ns
Durağan Akım 13 uA
CMOS Process Technology 0.18 micron
Paket 208-pin PQFP
Montaj Türü Surface mount
Programmable Output Slew Rate Supported
Programmable Output Bus Hold Supported
Programmable Output Pull-Up Supported
Programmable Open-Drain Output Supported
Programmable Output Ground Supported
Schmitt-Trigger Input Selectable per input pin
Speed Grade -7
Temperature Grade Indicator I
Lead-Free Status Lead free
RoHS Durumu RoHS compliant

XC2C256-7PQG208I 208-pin pqfp Pin Yapısı Kılavuzu

XC2C256-7PQG208I (208-pin pqfp paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

208-pin pqfp paket pin çizelgesi için XC2C256-7PQG208I

Ayrıntılı pin çıkış verisi mevcut değil: XC2C256-7PQG208I.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

XC2C256-7PQG208I için uygundur 6 uygulamas: Industrial Control and Automation, Legacy Bus and Interface Consolidation, Data Acquisition and Signal Conditioning, Motor Control and Sequencing, Embedded Communications Interface, Compact Programmable Control Subsystem.

🏭

Industrial Control and Automation

The XC2C256-7PQG208I fits industrial control logic that requires 256 macrocells and 173 I/O while operating in a compact, deterministic programmable-logic structure. It can implement sequencing, interlocks, sensor decoding, actuator control, and bus arbitration in one device. The -7 speed grade is useful for timing-sensitive control paths, while selectable Schmitt-trigger inputs improve tolerance for slow or noisy industrial signals. Place input conditioning close to the device, keep switching-current paths away from sensitive control nets, and verify the DS094 configuration and supply-sequencing requirements before layout release.

🔧

Legacy Bus and Interface Consolidation

The XC2C256-7PQG208I is suitable for consolidating several legacy interface functions into one programmable device. Its 256 macrocells can support address decoding, protocol conversion, interrupt control, register files, and glue logic, while 173 I/O provide ample connections for parallel buses and control signals. Programmable output slew rate, bus hold, pull-up, and open-drain options allow the output stage to be adjusted more precisely than a fixed bipolar PLD. The design should account for setup and hold timing, unused-pin behavior, bus contention, and the electrical limits of every connected legacy device.

📟

Data Acquisition and Signal Conditioning

The XC2C256-7PQG208I can serve as the digital control and acquisition layer beside analog front ends in measurement systems. Selectable Schmitt-trigger inputs help reject slower transitions on sensor or switch outputs, while the large macrocell count accommodates counters, state machines, sample sequencing, and data-format conversion. The device is especially appropriate where deterministic in-system reconfiguration and nonvolatile configuration are more important than very high logic density. Keep analog and digital return paths separated, provide local supply bypassing, and validate input thresholds and timing against the actual sensor interface rather than relying on nominal logic levels alone.

🏭

Motor Control and Sequencing

The XC2C256-7PQG208I supports deterministic motor-control sequencing, position decoding, limit handling, and protection coordination where a small MCU would otherwise devote substantial resources to glue logic. Its 173 I/O allow separate connections for encoders, hall sensors, stepper signals, fault signals, and discrete outputs. The -7 timing grade supports faster control-loop combinational logic, while programmable output slew rate can help control edge rates on selected signals. Confirm output-drive limits, external transistor interfaces, isolation boundaries, and all shutdown paths before connecting the CPLD to power-stage circuitry.

🌐

Embedded Communications Interface

The XC2C256-7PQG208I is suitable for communications equipment requiring dedicated framing, filtering, buffering, and supervisory logic around a separate transceiver or processor. Its macrocell capacity permits parallel-to-serial logic, command queues, CRC generation, flow control, and fault handling in a nonvolatile programmable device. The 1.8-V optimization can simplify interfaces when the surrounding logic also operates near that voltage. Maintain controlled impedance on high-speed routes, provide a clean configuration path, and review the DS094 I/O standards and timing limits for each communications interface implemented in the logic.

🧩

Compact Programmable Control Subsystem

The XC2C256-7PQG208I can act as a dedicated programmable subsystem in appliances, test equipment, and embedded products that need autonomous logic separate from the main processor. It can implement timers, alarm logic, state machines, keystroke scanning, display sequencing, and peripheral arbitration while retaining its configuration in nonvolatile memory. In-system programmability supports field updates without removing the device from the board. For reliable updates, reserve control for configuration access, isolate unrelated noisy nets, and validate power-loss behavior against the product’s recovery requirements.

What are the key specifications of XC2C256-7PQG208I?
The XC2C256-7PQG208I is a 256-macrocell, 173-I/O, in-system-programmable CoolRunner-II CPLD optimized for 1.8 V systems. According to the AMD CoolRunner-II DS094 datasheet, it provides pin-to-pin delays as fast as 5.7 ns, quiescent current as low as 13 uA, and a 0.18-micron CMOS implementation. The device is offered in a 208-pin PQFP package and includes programmable output slew rate, bus hold, pull-up, open-drain, and ground options, plus selectable Schmitt-trigger inputs.
What is the operating voltage of XC2C256-7PQG208I?
The XC2C256-7PQG208I is optimized for 1.8 V systems. The manufacturer describes it as a CoolRunner-II device intended for 1.8-V operation, while detailed core and I/O supply limits are defined in the DS094 device tables. Use the manufacturer’s recommended operating ranges for each supply rail when designing the power tree, and include separate filtering for any external interface voltage.
How many macrocells and I/O pins does XC2C256-7PQG208I have?
The XC2C256-7PQG208I contains 256 macrocells and provides 173 user I/O pins. These figures make it suitable for medium-density control logic, parallel interfaces, bus arbitration, and legacy peripheral integration. The distinction between macrocells and package pins is important: macrocells form the programmable logic resources, while the 173 I/O pins are the physical user connections exposed by the device.
Where can I download the XC2C256-7PQG208I datasheet PDF?
The XC2C256 family datasheet is available through the AMD documentation link identified as DS094. It is titled “XC2C256 CoolRunner-II CPLD (DS094)” and carries release date 2007-03-07 and revision 3.2 in the cited document record. Use that document for the authoritative package drawings, pin descriptions, DC characteristics, configuration details, and recommended operating conditions for the XC2C256 device family.
Where can I find the XC2C256-7PQG208I pinout?
The XC2C256-7PQG208I pinout is published in the AMD CoolRunner-II XC2C256 datasheet, DS094. The device uses a 208-pin PQFP package, so the package drawing and pin-description table must be consulted together when assigning PCB nets. The 173 user I/O count refers to programmable I/O functions; the remaining package positions include power, ground, configuration, and dedicated pins.
Can XC2C256-7PQ208I replace XC2C256-7PQG208I?
The XC2C256-7PQ208I is a closely related ordering variant that uses the same 208-pin PQFP footprint and retains the 256-macrocell, 173-I/O architecture. Its principal ordering distinction is the G lead-free identifier, while the listed MPN does not carry that identifier. Verify the assembly and purchasing requirements for the finished product before approving the substitution, and confirm the required temperature grade and regulatory documentation.
What can replace XC2C256-7PQG208I?
The closest same-footprint choices identified for the XC2C256-7PQG208I are the XC2C256-7PQ208I, XC2C256-6PQG208C, XC2C256-7PQG208C, and XC2C256-7PQ208C. All use the 208-pin PQFP format, but they differ in speed or commercial-versus-industrial ordering. A replacement should be checked for voltage compatibility, timing margin, temperature grade, configuration interface, initialization state, and exact package drawing rather than selected solely by macrocell count.
What is the best drop-in replacement for XC2C256-7PQG208I?
The XC2C256-7PQ208I is the closest identified drop-in candidate because it preserves the -7 speed designation, 256-macrocell architecture, 173 I/O count, and 208-pin PQFP footprint. The order-code distinction concerns the G lead-free identifier. A production substitution should still undergo board-level verification because configuration, supply sequencing, I/O behavior, and marking requirements are not determined by package and macrocell count alone.
XC2C256-7PQG208I vs XC2C256-6PQG208C - which is better?
The XC2C256-7PQG208I is preferable when the design requires the -7 speed grade, while the XC2C256-6PQG208C is the lower-speed variant. Both are 256-macrocell CoolRunner-II devices in the 208-pin PQFP format, but the -6 versus -7 suffix is a meaningful timing and potentially temperature-grade distinction. Compare the DS094 timing tables against the design’s worst-case clock and setup requirements before replacing the -7 device.
When should I choose XC2C256-7PQG208I over another CoolRunner-II device?
Choose the XC2C256-7PQG208I when a design requires 256 macrocells, 173 I/O, in-system reconfiguration, 1.8-V optimization, and the -7 speed grade in a 208-pin PQFP footprint. A lower-speed or commercial-grade CoolRunner-II variant may be preferable when timing margin is generous or cost and assembly requirements dominate. The choice should also consider whether the legacy device’s configuration method and supply architecture remain supported in the new system.
Is XC2C256-7PQG208I suitable for industrial control systems?
The XC2C256-7PQG208I is an industrial-identified -7 device in the CoolRunner-II family and is suitable for industrial control logic when its specified electrical and temperature limits are respected. The I suffix distinguishes it from commercial C variants, but the exact operating-temperature range should be taken from the DS094 ordering information. Confirm enclosure temperature, power-supply tolerance, and system reliability requirements during qualification.
Is XC2C256-7PQG208I in stock?
Current stock for XC2C256-7PQG208I should be checked through the Request a Quote form on this page. Because this is a legacy CoolRunner-II ordering code, availability can vary with package markings, temperature grade, and the remaining inventory of authorized channels. Submit the exact MPN, required quantity, and delivery target so the current sourcing position can be confirmed without relying on historical listing status.
How much does XC2C256-7PQG208I cost?
The current XC2C256-7PQG208I commercial price should be obtained through the Request a Quote form on this page. Legacy programmable-logic pricing can vary substantially with quantity, remaining inventory, inspection requirements, and whether the required G lead-free ordering code must be preserved exactly. Provide the target annual usage, prototype quantity, and production forecast when requesting the quote.
What is the lead time for XC2C256-7PQG208I?
The current lead time for XC2C256-7PQG208I depends on the quantity and confirmed inventory, and it should be requested through the Request a Quote form on this page. For a legacy device, include schedule-critical quantities, acceptable date codes, and whether an engineering substitution review is permitted. This allows sourcing to distinguish immediate inventory allocation from manufacturing or third-party procurement lead time.
What programming and configuration tools support XC2C256-7PQG208I?
The XC2C256-7PQG208I belongs to the CoolRunner-II family, whose configuration information is stored in on-chip nonvolatile memory and supports in-system programming. Programming is normally performed with the device and configuration flow documented for the CoolRunner-II family. Before committing a board revision, confirm the supported cable, driver, device database, and cable voltage requirements against the final system configuration method.

Mühendislik referans verileri: XC2C256-7PQG208I — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the XC2C256-7PQG208I when an existing design requires the exact -7 speed grade, I temperature suffix, G lead-free identifier, 256 macrocells, and 173 I/O in a 208-pin PQFP package. The XC2C256-7PQ208I is the closest migration candidate when the assembly can accept the ordering-code difference. Use XC2C256-7PQG208C or XC2C256-7PQ208C only when a commercial-temperature grade and the corresponding lead-free status are acceptable. Consider XC2C256-6PQG208C only after timing analysis confirms adequate setup-and-hold margin. For any substitution, verify the DS094 package drawing, power architecture, I/O standards, configuration method, and environmental requirements. A footprint-compatible part is not automatically suitable when temperature grade, speed grade, or configuration behavior changes.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün XC2C256-7PQ208I XC2C256-7PQG208C XC2C256-7PQ208C XC2C256-6PQG208C
Brand Xilinx Xilinx Xilinx Xilinx Xilinx
Package 208-pin PQFP 208-pin PQFP - same footprint 208-pin PQFP - same footprint 208-pin PQFP - same footprint 208-pin PQFP - same footprint
Macrocells 256 256 256 256 256
User I/O 173 173 173 173 173
Optimized Supply Voltage 1.8 V 1.8 V 1.8 V 1.8 V 1.8 V
Speed Grade -7 -7 -7 -7 -6
Temperature-Grade Suffix I I C C C
Lead-Free G Identifier Yes No Yes No Yes

Ana Farklılayıcılar

  • Closest ordering match retains the -7 timing grade (karşılaştırma:XC2C256-7PQ208I)
  • Industrial identifier is retained instead of changing to commercial grade (karşılaştırma:XC2C256-7PQG208C)
  • Higher speed grade than the lower-speed PQG208 option (karşılaştırma:XC2C256-6PQG208C)

Tasarım Notları

Design the XC2C256-7PQG208I power network around the 1.8-V optimization of the CoolRunner-II family. Place local high-frequency bypass capacitors at the device supply pins and isolate switching supplies or high-current loads from the logic rail. Confirm every supply rail, sequencing condition, and I/O voltage limit against the DS094 tables. Use pull-ups or pull-downs only where the device configuration and external bus ownership make them necessary, since permanently biased outputs can increase current and slow transitions.

Reserve the complete 208-pin PQFP footprint, including power, ground, configuration, and dedicated pins, even though 173 positions are user I/O. Follow the manufacturer’s package drawing for lead pitch, pin numbering, exposed or thermal structures if applicable, and recommended land pattern. Place decoupling and programming-interface access near the relevant pins. Keep external clocks and high-speed bus routes short, continuous where practical, and away from switching-node and high-current return paths.

Use the configurable Schmitt-trigger input function for external signals with slow edges, hysteresis requirements, or moderate noise susceptibility. For ordinary CMOS interfaces, confirm that the source voltage, threshold assumptions, and drive strength match the selected I/O mode. Programmable slew-rate limiting can reduce overshoot and ringing on selected outputs, but it also increases transition time. Validate the resulting edge rate against receiver setup time, bus timing, and any electromagnetic-emissions requirements.

Do not treat matching macrocell counts as proof of drop-in equivalence. Before replacing the XC2C256-7PQG208I, compare the exact speed suffix, temperature suffix, lead-free ordering code, package drawing, configuration method, supply voltages, I/O standards, and configuration-security requirements. The -6 alternative may require additional timing analysis, while a C-grade part may not satisfy the original industrial environmental requirement. Validate the complete design with the manufacturer’s timing models or suitable simulation tools.

Uyumluluk Bilgisi

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Yes
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The product listing identifies the device as lead free and RoHS compliant. REACH, halogen-free, conflict-minerals, and automotive qualification status are not established by the cited technical information.

Veri doğrulanma tarihi: 2026-11-16 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

xc2c256 7vqg100i xc2c256 7vqg100c xc2c256 7tqg144c xc2c256 7tqg144i xc2c256 7cpg132i xc2c256 7ftg256i xc2c256 6ftg256c xc2c256 7ftg256c XC2C256-7PQG208I datasheet XC2C256-7PQG208I pinout XC2C256-7PQG208I PQFP-208 XC2C256-7PQG208I replacement XC2C256-7PQG208I vs XC2C256-6PQG208C XC2C256-7PQG208I price Xilinx XC2C256-7PQG208I

İlgili Bileşenler ve Terimler

Xilinx AMD XC2C256-7PQG208I XC2C256-7PQ208I XC2C256-7PQG208C XC2C256-7PQ208C XC2C256-6PQG208C CoolRunner-II CPLD complex programmable logic device FPGA and CPLD programmable logic IC semiconductor 256 macrocells 173 user I/O in-system programmable 1.8 V optimized system 5.7 ns pin-to-pin delay 13 uA quiescent current 0.18 micron CMOS PQFP-208 surface mount Schmitt-trigger input slew-rate control bus hold open-drain output programmable output pull-up RoHS compliant lead-free package
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle