XC2C256-7PQG208I - 256-Macrocell 1.8V CPLD | Xilinx
部品番号: XC2C256-7PQG208I ✗ 生産終了XC2C256-7PQG208I 概要
A CPLD is a programmable logic device that combines programmable AND/OR logic structures, input blocks, output logic, and embedded memory into a reconfigurable digital integrated circuit. Within the semiconductor hierarchy, a CPLD is a programmable-logic IC, a member of the FPGA and CPLD family, and a practical alternative to a small FPGA when deterministic routing, nonvolatile configuration, and relatively simple logic integration are priorities.
The XC2C256 part provides a useful density level for control logic, bus arbitration, protocol interfaces, address decoding, glue logic, and embedded storage functions. Programmable output features include slew-rate limiting, bus hold, pull-up, open-drain, and programmable-ground configurations. Individual input pins can also use a Schmitt-trigger function, which helps improve noise tolerance on slowly changing or externally generated signals.
The device uses a 0.18-micron CMOS CPLD architecture designed for effective logic synthesis. Its 256 macrocells provide substantially more logic capacity than small legacy GAL devices, while in-system programmability allows configuration or field updates without removing the device from its circuit board. The -7 suffix denotes a specific speed grade, while the I suffix identifies the industrial-oriented ordering variant.
Typical implementations include industrial control and data-acquisition systems, embedded communications interfaces, legacy peripheral expansion, sensor conditioning, motor-control sequencing, and compact programmable logic subsystems. Its 173 I/O count is particularly useful for designs requiring numerous external connections, parallel buses, or mixed digital control and status signals.
PCB design should account for the 208-pin PQFP footprint, its lead pitch, exposed supply requirements, and the package's thermal behavior. Decoupling capacitors should be placed close to the supply pins, programming and configuration traces should remain short and well controlled, and unused inputs should be terminated according to the manufacturer's system-design guidance.
This page combines the CoolRunner-II DS094 technical details with application guidance, same-footprint alternatives, comparison parameters, and practical design considerations. These engineering references help engineers evaluate whether the XC2C256-7PQG208I remains suitable for an existing design or a controlled modernization without obscuring the distinctions between speed, temperature, and ordering variants.
ドロップイン代替品: XC2C256-7PQG208I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC2C256-7PQG208I (同一形状・フットプリント) — 相違点: Device Type, Package, Quiescent Current, Process Technology, Configuration Memory.
XC2C256-7PQ208I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC2C256-7PQG208C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC2C256-7PQ208C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC2C256-6PQG208C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC2C256-7PQG208I 最大定格&電気的特性
| Device Type | CoolRunner-II complex programmable logic device |
| Macrocells | 256 |
| User I/O | 173 |
| Programming Type | In-system programmable |
| Optimized Supply Voltage | 1.8 V |
| Maximum Pin-to-Pin Delay | 5.7 ns |
| 静止電流 | 13 uA |
| CMOS Process Technology | 0.18 micron |
| パッケージ | 208-pin PQFP |
| 実装タイプ | Surface mount |
| Programmable Output Slew Rate | Supported |
| Programmable Output Bus Hold | Supported |
| Programmable Output Pull-Up | Supported |
| Programmable Open-Drain Output | Supported |
| Programmable Output Ground | Supported |
| Schmitt-Trigger Input | Selectable per input pin |
| Speed Grade | -7 |
| Temperature Grade Indicator | I |
| Lead-Free Status | Lead free |
| RoHS ステータス | RoHS compliant |
XC2C256-7PQG208I 208-pin pqfp ピン配置ガイド
XC2C256-7PQG208I (208-pin pqfp パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC2C256-7PQG208I.
詳細は データシート をご参照ください。
主な用途
XC2C256-7PQG208I の用途: 6 件s: Industrial Control and Automation, Legacy Bus and Interface Consolidation, Data Acquisition and Signal Conditioning, Motor Control and Sequencing, Embedded Communications Interface, Compact Programmable Control Subsystem.
Industrial Control and Automation
The XC2C256-7PQG208I fits industrial control logic that requires 256 macrocells and 173 I/O while operating in a compact, deterministic programmable-logic structure. It can implement sequencing, interlocks, sensor decoding, actuator control, and bus arbitration in one device. The -7 speed grade is useful for timing-sensitive control paths, while selectable Schmitt-trigger inputs improve tolerance for slow or noisy industrial signals. Place input conditioning close to the device, keep switching-current paths away from sensitive control nets, and verify the DS094 configuration and supply-sequencing requirements before layout release.
おすすめ
Legacy Bus and Interface Consolidation
The XC2C256-7PQG208I is suitable for consolidating several legacy interface functions into one programmable device. Its 256 macrocells can support address decoding, protocol conversion, interrupt control, register files, and glue logic, while 173 I/O provide ample connections for parallel buses and control signals. Programmable output slew rate, bus hold, pull-up, and open-drain options allow the output stage to be adjusted more precisely than a fixed bipolar PLD. The design should account for setup and hold timing, unused-pin behavior, bus contention, and the electrical limits of every connected legacy device.
おすすめ
Data Acquisition and Signal Conditioning
The XC2C256-7PQG208I can serve as the digital control and acquisition layer beside analog front ends in measurement systems. Selectable Schmitt-trigger inputs help reject slower transitions on sensor or switch outputs, while the large macrocell count accommodates counters, state machines, sample sequencing, and data-format conversion. The device is especially appropriate where deterministic in-system reconfiguration and nonvolatile configuration are more important than very high logic density. Keep analog and digital return paths separated, provide local supply bypassing, and validate input thresholds and timing against the actual sensor interface rather than relying on nominal logic levels alone.
おすすめ
Motor Control and Sequencing
The XC2C256-7PQG208I supports deterministic motor-control sequencing, position decoding, limit handling, and protection coordination where a small MCU would otherwise devote substantial resources to glue logic. Its 173 I/O allow separate connections for encoders, hall sensors, stepper signals, fault signals, and discrete outputs. The -7 timing grade supports faster control-loop combinational logic, while programmable output slew rate can help control edge rates on selected signals. Confirm output-drive limits, external transistor interfaces, isolation boundaries, and all shutdown paths before connecting the CPLD to power-stage circuitry.
おすすめ
Embedded Communications Interface
The XC2C256-7PQG208I is suitable for communications equipment requiring dedicated framing, filtering, buffering, and supervisory logic around a separate transceiver or processor. Its macrocell capacity permits parallel-to-serial logic, command queues, CRC generation, flow control, and fault handling in a nonvolatile programmable device. The 1.8-V optimization can simplify interfaces when the surrounding logic also operates near that voltage. Maintain controlled impedance on high-speed routes, provide a clean configuration path, and review the DS094 I/O standards and timing limits for each communications interface implemented in the logic.
おすすめ
Compact Programmable Control Subsystem
The XC2C256-7PQG208I can act as a dedicated programmable subsystem in appliances, test equipment, and embedded products that need autonomous logic separate from the main processor. It can implement timers, alarm logic, state machines, keystroke scanning, display sequencing, and peripheral arbitration while retaining its configuration in nonvolatile memory. In-system programmability supports field updates without removing the device from the board. For reliable updates, reserve control for configuration access, isolate unrelated noisy nets, and validate power-loss behavior against the product’s recovery requirements.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC2C256-7PQG208I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC2C256-7PQ208I | XC2C256-7PQG208C | XC2C256-7PQ208C | XC2C256-6PQG208C |
|---|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | 208-pin PQFP | 208-pin PQFP - same footprint | 208-pin PQFP - same footprint | 208-pin PQFP - same footprint | 208-pin PQFP - same footprint |
| Macrocells | 256 | 256 | 256 | 256 | 256 |
| User I/O | 173 | 173 | 173 | 173 | 173 |
| Optimized Supply Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Speed Grade | -7 | -7 | -7 | -7 | -6 |
| Temperature-Grade Suffix | I | I | C | C | C |
| Lead-Free G Identifier | Yes | No | Yes | No | Yes |
主な差別化要因
- Closest ordering match retains the -7 timing grade (vs XC2C256-7PQ208I)
- Industrial identifier is retained instead of changing to commercial grade (vs XC2C256-7PQG208C)
- Higher speed grade than the lower-speed PQG208 option (vs XC2C256-6PQG208C)
設計ノート
Design the XC2C256-7PQG208I power network around the 1.8-V optimization of the CoolRunner-II family. Place local high-frequency bypass capacitors at the device supply pins and isolate switching supplies or high-current loads from the logic rail. Confirm every supply rail, sequencing condition, and I/O voltage limit against the DS094 tables. Use pull-ups or pull-downs only where the device configuration and external bus ownership make them necessary, since permanently biased outputs can increase current and slow transitions.
Reserve the complete 208-pin PQFP footprint, including power, ground, configuration, and dedicated pins, even though 173 positions are user I/O. Follow the manufacturer’s package drawing for lead pitch, pin numbering, exposed or thermal structures if applicable, and recommended land pattern. Place decoupling and programming-interface access near the relevant pins. Keep external clocks and high-speed bus routes short, continuous where practical, and away from switching-node and high-current return paths.
Use the configurable Schmitt-trigger input function for external signals with slow edges, hysteresis requirements, or moderate noise susceptibility. For ordinary CMOS interfaces, confirm that the source voltage, threshold assumptions, and drive strength match the selected I/O mode. Programmable slew-rate limiting can reduce overshoot and ringing on selected outputs, but it also increases transition time. Validate the resulting edge rate against receiver setup time, bus timing, and any electromagnetic-emissions requirements.
Do not treat matching macrocell counts as proof of drop-in equivalence. Before replacing the XC2C256-7PQG208I, compare the exact speed suffix, temperature suffix, lead-free ordering code, package drawing, configuration method, supply voltages, I/O standards, and configuration-security requirements. The -6 alternative may require additional timing analysis, while a C-grade part may not satisfy the original industrial environmental requirement. Validate the complete design with the manufacturer’s timing models or suitable simulation tools.
コンプライアンス情報
The product listing identifies the device as lead free and RoHS compliant. REACH, halogen-free, conflict-minerals, and automotive qualification status are not established by the cited technical information.