XC7K410T-1FBG900C - 406,720-Cell Kintex-7 FPGA | AMD
MPN: XC7K410T-1FBG900C ✓ AktifXC7K410T-1FBG900C Genel Bakış
A field-programmable gate array is a semiconductor whose digital functionality is configured after manufacture. The XC7K410T belongs to the Kintex-7 FPGA hierarchy, where it sits between lower-cost programmable-logic families and larger FPGA/CPLD products. Its large logic capacity supports parallel processing, protocol bridging, control logic, video or image pipelines, and hardware acceleration without requiring a custom ASIC.
Principal device attributes include a -1 speed grade, the 28 nm Kintex-7 process generation, 406,720 logic cells, 28,620 Kb of block RAM, and 500 available I/O in the FBG900 package. Dedicated arithmetic resources support fixed-point and DSP-oriented pipelines, while selectable I/O standards and high-speed transceivers allow board designers to implement mixed-speed external interfaces. Exact transceiver ratings depend on the selected I/O type and operating conditions.
The FBG900 package provides the greatest pin and I/O count among the referenced XC7K410T package options, making it appropriate for designs requiring dense connectivity. The -1 grade trades peak performance for lower power and heat than faster Kintex-7 speed grades, making it appropriate when the design does not require the maximum timing margin of -2 or -3 devices. Bank planning remains essential because power, voltage, and transceiver capabilities are organized by I/O bank.
Typical uses include optical-network control planes, high-speed data acquisition, industrial vision, radar and communications test equipment, storage interfaces, and accelerator cards. The device can combine several interfaces and real-time processing functions on one board. For designs with lower I/O demand, smaller 676-ball packages may simplify routing and reduce package complexity, while faster grades may be necessary for difficult timing closures.
Power, decoupling, and thermal management dominate FBG900 implementation. Follow the manufacturer power-guidance tables for each rail, provide high-frequency decoupling close to the device, and design the package substrate for the appropriate thermal and power-integrity requirements. Because this page covers an exact ordering code, verify speed grade, temperature grade, package, and lifecycle status against the current AMD ordering information before release.
This product record combines exact ordering-code identification, package-aware alternative analysis, comparison parameters, application guidance, and practical PCB design cautions. It is intended to accelerate component selection while preserving the validation steps engineers must complete against the AMD Kintex-7 documentation and package-specific files.
Drop-in alternatifler için XC7K410T-1FBG900C — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller XC7K410T-1FBG900C (aynı form faktörü ve ayağa oturma) — farklı olan Device Type, Package.
XC7K410T-1FBG900I
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC7K410T-2FBG900I
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
XC7K410T-2FBG900C
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC7K410T-3FBG900C
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
XC7K410T-1FBG900E
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
XC7K410T-1FBG900C Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | Kintex-7 FPGA |
| Logic Cells | 406,720 cells |
| Block RAM | 28,620 Kb |
| User I/O | 500 I/O |
| Process Technology | 28 nm |
| Speed Grade | -1 |
| Temperature Grade Code | C |
| Paket | FBG900, 900-ball FCBGA |
| Montaj Türü | Surface mount |
| FPGA Family | Kintex-7 |
| Programmable Logic | 406,720 logic cells |
| Embedded Block RAM | 28,620 Kb |
| Package Ball Count | 900 balls |
| Transceiver Type | High-speed serial transceiver |
XC7K410T-1FBG900C 900 balls Pin Yapısı Kılavuzu
XC7K410T-1FBG900C (900 balls paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: XC7K410T-1FBG900C.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
XC7K410T-1FBG900C için uygundur 6 uygulamas: Optical Networking Control Plane, High-Speed Data Acquisition, Industrial Vision Processing, Radar and Communications Test, Storage Interface Accelerator, Real-Time Signal Processing.
Optical Networking Control Plane
The XC7K410T-1FBG900C fits optical networking control-plane and data-plane designs that combine multiple packet-processing paths with high-speed serial connectivity. Its 406,720 logic cells can support protocol engines, forwarding logic, and traffic management, while 28,620 Kb of block RAM supports packet buffering and lookup structures. The 500-I/O FBG900 package offers more board connectivity than smaller Kintex-7 packages. Designers should use the -1 grade only after confirming timing closure, because serial interface and internal-clock constraints can consume much of the available margin.
Önerilen
High-Speed Data Acquisition
The XC7K410T-1FBG900C is suitable for multichannel data-acquisition systems requiring parallel sensor capture, real-time filtering, and a flexible control interface. Its 406,720 logic cells support parallel lanes, trigger logic, digital signal-processing pipelines, and validation functions, while 28,620 Kb of block RAM can buffer sample batches. The 500 available I/O help reduce multiplexing pressure near the converters. A practical design uses the exact FBG900 pinout to plan banks, clocking, and high-speed trace topology without relying on a generic 900-ball mapping.
Önerilen
Industrial Vision Processing
The XC7K410T-1FBG900C can serve as the programmable processing engine in an industrial vision system combining image buffering, feature extraction, and machine-interface control. Its 406,720 logic cells permit parallel pipelines rather than sequential software execution, and 28,620 Kb of block RAM provides on-chip frame and line storage. With 500 I/O, the FBG900 package supports multiple cameras, trigger signals, and industrial field-bus interfaces. The -1 grade can reduce power relative to faster grades, but image-processing clock domains and external interface timing must be verified against the target implementation.
Önerilen
Radar and Communications Test
The XC7K410T-1FBG900C fits laboratory and embedded communications-test systems that need flexible logic, substantial memory, and numerous instrument interfaces. The 406,720-cell fabric can implement test sequences, digital modulation, timing checks, and control paths, while 28,620 Kb of block RAM supports captured waveforms and correlation data. Its 500-I/O FBG900 package allows dense connections to ADC, DAC, RF, and synchronization hardware. For high fan-out or timing-critical instrumentation, compare the -1 grade against the -2 alternatives and rerun static timing analysis after changing the device speed grade.
Önerilen
Storage Interface Accelerator
The XC7K410T-1FBG900C is appropriate for storage controllers, data movers, and protocol accelerators that require programmable logic operating alongside dedicated serial transceivers. Its 406,720 logic cells can support command processing, queues, error handling, and data-path acceleration, while 28,620 Kb of block RAM provides controlled on-chip buffering. The 500-I/O package gives a storage subsystem more connectivity than smaller package variants. Engineers should balance the -1 grade's power characteristics against required transfer-rate timing and verify each transceiver configuration against the selected I/O bank and package connection.
Önerilen
Real-Time Signal Processing
The XC7K410T-1FBG900C supports real-time filtering, modulation, spectral analysis, and fixed-point processing by combining a large programmable fabric with dedicated arithmetic resources. The 406,720 logic cells accommodate parallel datapaths and control logic, while 28,620 Kb of block RAM supports rolling windows, correlation, and sample storage. The 500-I/O FBG900 package is useful when many converters or DSP components must operate in parallel. Because throughput depends on clock rate and pipeline structure, designers should use a -2 grade if the -1 implementation cannot satisfy timing without excessive resource use.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: XC7K410T-1FBG900C — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | XC7K410T-1FBG900I | XC7K410T-2FBG900I | XC7K410T-2FBG900C | XC7K410T-3FBG900C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | FBG900, 900-ball FCBGA | FBG900, 900-ball FCBGA | FBG900, 900-ball FCBGA | FBG900, 900-ball FCBGA | FBG900, 900-ball FCBGA |
| Speed Grade | -1 | -1 | -2 | -2 | -3 |
| Temperature Suffix | C | I | I | C | C |
| Logic Cells | 406,720 cells | 406,720 cells | 406,720 cells | 406,720 cells | 406,720 cells |
| Block RAM | 28,620 Kb | 28,620 Kb | 28,620 Kb | 28,620 Kb | 28,620 Kb |
| User I/O | 500 I/O | 500 I/O | 500 I/O | 500 I/O | 500 I/O |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Special Features | Programmable logic, block RAM, DSP resources, programmable I/O, and high-speed serial transceivers | Same Kintex-7 resource architecture | Same Kintex-7 resource architecture | Same Kintex-7 resource architecture | Same Kintex-7 resource architecture |
Ana Farklılayıcılar
- Lower-speed grade option within the same FBG900 architecture (karşılaştırma:XC7K410T-2FBG900I)
- Commercial temperature ordering code with full 500-I/O connectivity (karşılaştırma:XC7K410T-1FBG900I)
- Same-package timing upgrade remains available without a PCB change (karşılaştırma:XC7K410T-3FBG900C)
Tasarım Notları
Use the AMD power tables for the exact XC7K410T device, -1 speed grade, and implemented I/O activity rather than applying a single current estimate to every design. Decouple each supply rail at the package with the capacitance and placement specified by the device guidance, and preserve the recommended power-and-ground ball connections. Transceiver-enabled banks, high utilization, and fast clocking can materially change dynamic demand, so review the completed implementation before releasing the power system.
FBG900 boards require a thermal path from the FPGA into the substrate, board copper, and enclosure. Analyze the finalized design's activity factor and ambient conditions rather than relying only on nominal logic-cell count. Faster alternatives generally change performance and power characteristics, which can require a different thermal budget. Use the selected device's power and temperature limits to determine whether forced air, heat spreaders, or additional board copper area are necessary.
Do not assign signals from a generic 900-ball library. Import the FBG900 package file and confirm every power, ground, configuration, clock, user I/O, and transceiver ball against the selected speed and temperature ordering code. Review bank constraints before fixing connector and component placement. The high pin count makes escape routing dense, so early package-aware floorplanning can prevent power-plane splits and difficult high-speed routing changes.
Plan high-speed serial and clock routes as controlled-impedance interconnects with reference planes that remain continuous. Follow the AMD package and board-design guidance for transceiver signal paths, termination, connectivity, and isolation. Account for package-ball and PCB losses when choosing I/O standards and data rates. Because the alternatives differ mainly in speed grade, retest timing and signal-integrity margins whenever the device grade changes.
The most common substitution error is treating FBG900 and FFG900 ordering codes as mechanically identical without checking the package documentation. The AMD compatibility information describes meaningful mechanical and temperature-related differences between those packages. Likewise, a same-ball-count device from another FPGA family may have different supply rails, bank assignments, configuration pins, or transceiver ball maps. Approve substitutions only after comparing the exact AMD package files and power architecture.
Uyumluluk Bilgisi
The exact ordering-code compliance declarations were not identified in the referenced product pages and should be confirmed with AMD before procurement.