XC7K410T-1FBG900C - 406,720-Cell Kintex-7 FPGA | AMD
MPN: XC7K410T-1FBG900C ✓ פעילXC7K410T-1FBG900C סקירה
A field-programmable gate array is a semiconductor whose digital functionality is configured after manufacture. The XC7K410T belongs to the Kintex-7 FPGA hierarchy, where it sits between lower-cost programmable-logic families and larger FPGA/CPLD products. Its large logic capacity supports parallel processing, protocol bridging, control logic, video or image pipelines, and hardware acceleration without requiring a custom ASIC.
Principal device attributes include a -1 speed grade, the 28 nm Kintex-7 process generation, 406,720 logic cells, 28,620 Kb of block RAM, and 500 available I/O in the FBG900 package. Dedicated arithmetic resources support fixed-point and DSP-oriented pipelines, while selectable I/O standards and high-speed transceivers allow board designers to implement mixed-speed external interfaces. Exact transceiver ratings depend on the selected I/O type and operating conditions.
The FBG900 package provides the greatest pin and I/O count among the referenced XC7K410T package options, making it appropriate for designs requiring dense connectivity. The -1 grade trades peak performance for lower power and heat than faster Kintex-7 speed grades, making it appropriate when the design does not require the maximum timing margin of -2 or -3 devices. Bank planning remains essential because power, voltage, and transceiver capabilities are organized by I/O bank.
Typical uses include optical-network control planes, high-speed data acquisition, industrial vision, radar and communications test equipment, storage interfaces, and accelerator cards. The device can combine several interfaces and real-time processing functions on one board. For designs with lower I/O demand, smaller 676-ball packages may simplify routing and reduce package complexity, while faster grades may be necessary for difficult timing closures.
Power, decoupling, and thermal management dominate FBG900 implementation. Follow the manufacturer power-guidance tables for each rail, provide high-frequency decoupling close to the device, and design the package substrate for the appropriate thermal and power-integrity requirements. Because this page covers an exact ordering code, verify speed grade, temperature grade, package, and lifecycle status against the current AMD ordering information before release.
This product record combines exact ordering-code identification, package-aware alternative analysis, comparison parameters, application guidance, and practical PCB design cautions. It is intended to accelerate component selection while preserving the validation steps engineers must complete against the AMD Kintex-7 documentation and package-specific files.
חלופות תחליף ישיר עבור XC7K410T-1FBG900C — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם XC7K410T-1FBG900C (אותו גורם צורה וטביעת רגל) — שונים ב Device Type, Package.
XC7K410T-1FBG900I
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC7K410T-2FBG900I
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
XC7K410T-2FBG900C
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC7K410T-3FBG900C
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
XC7K410T-1FBG900E
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
XC7K410T-1FBG900C דירוגים מרביים ומאפיינים חשמליים
| Device Type | Kintex-7 FPGA |
| Logic Cells | 406,720 cells |
| Block RAM | 28,620 Kb |
| User I/O | 500 I/O |
| Process Technology | 28 nm |
| Speed Grade | -1 |
| Temperature Grade Code | C |
| מארז | FBG900, 900-ball FCBGA |
| סוג הרכבה | Surface mount |
| FPGA Family | Kintex-7 |
| Programmable Logic | 406,720 logic cells |
| Embedded Block RAM | 28,620 Kb |
| Package Ball Count | 900 balls |
| Transceiver Type | High-speed serial transceiver |
מדריך תצורת פינים של XC7K410T-1FBG900C 900 balls
תצורת פינים עבור XC7K410T-1FBG900C (מארזת 900 balls). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור XC7K410T-1FBG900C.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
XC7K410T-1FBG900C מתאים עבור 6 יישוםs: Optical Networking Control Plane, High-Speed Data Acquisition, Industrial Vision Processing, Radar and Communications Test, Storage Interface Accelerator, Real-Time Signal Processing.
Optical Networking Control Plane
The XC7K410T-1FBG900C fits optical networking control-plane and data-plane designs that combine multiple packet-processing paths with high-speed serial connectivity. Its 406,720 logic cells can support protocol engines, forwarding logic, and traffic management, while 28,620 Kb of block RAM supports packet buffering and lookup structures. The 500-I/O FBG900 package offers more board connectivity than smaller Kintex-7 packages. Designers should use the -1 grade only after confirming timing closure, because serial interface and internal-clock constraints can consume much of the available margin.
מומלץ
High-Speed Data Acquisition
The XC7K410T-1FBG900C is suitable for multichannel data-acquisition systems requiring parallel sensor capture, real-time filtering, and a flexible control interface. Its 406,720 logic cells support parallel lanes, trigger logic, digital signal-processing pipelines, and validation functions, while 28,620 Kb of block RAM can buffer sample batches. The 500 available I/O help reduce multiplexing pressure near the converters. A practical design uses the exact FBG900 pinout to plan banks, clocking, and high-speed trace topology without relying on a generic 900-ball mapping.
מומלץ
Industrial Vision Processing
The XC7K410T-1FBG900C can serve as the programmable processing engine in an industrial vision system combining image buffering, feature extraction, and machine-interface control. Its 406,720 logic cells permit parallel pipelines rather than sequential software execution, and 28,620 Kb of block RAM provides on-chip frame and line storage. With 500 I/O, the FBG900 package supports multiple cameras, trigger signals, and industrial field-bus interfaces. The -1 grade can reduce power relative to faster grades, but image-processing clock domains and external interface timing must be verified against the target implementation.
מומלץ
Radar and Communications Test
The XC7K410T-1FBG900C fits laboratory and embedded communications-test systems that need flexible logic, substantial memory, and numerous instrument interfaces. The 406,720-cell fabric can implement test sequences, digital modulation, timing checks, and control paths, while 28,620 Kb of block RAM supports captured waveforms and correlation data. Its 500-I/O FBG900 package allows dense connections to ADC, DAC, RF, and synchronization hardware. For high fan-out or timing-critical instrumentation, compare the -1 grade against the -2 alternatives and rerun static timing analysis after changing the device speed grade.
מומלץ
Storage Interface Accelerator
The XC7K410T-1FBG900C is appropriate for storage controllers, data movers, and protocol accelerators that require programmable logic operating alongside dedicated serial transceivers. Its 406,720 logic cells can support command processing, queues, error handling, and data-path acceleration, while 28,620 Kb of block RAM provides controlled on-chip buffering. The 500-I/O package gives a storage subsystem more connectivity than smaller package variants. Engineers should balance the -1 grade's power characteristics against required transfer-rate timing and verify each transceiver configuration against the selected I/O bank and package connection.
מומלץ
Real-Time Signal Processing
The XC7K410T-1FBG900C supports real-time filtering, modulation, spectral analysis, and fixed-point processing by combining a large programmable fabric with dedicated arithmetic resources. The 406,720 logic cells accommodate parallel datapaths and control logic, while 28,620 Kb of block RAM supports rolling windows, correlation, and sample storage. The 500-I/O FBG900 package is useful when many converters or DSP components must operate in parallel. Because throughput depends on clock rate and pipeline structure, designers should use a -2 grade if the -1 implementation cannot satisfy timing without excessive resource use.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור XC7K410T-1FBG900C — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | XC7K410T-1FBG900I | XC7K410T-2FBG900I | XC7K410T-2FBG900C | XC7K410T-3FBG900C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | FBG900, 900-ball FCBGA | FBG900, 900-ball FCBGA | FBG900, 900-ball FCBGA | FBG900, 900-ball FCBGA | FBG900, 900-ball FCBGA |
| Speed Grade | -1 | -1 | -2 | -2 | -3 |
| Temperature Suffix | C | I | I | C | C |
| Logic Cells | 406,720 cells | 406,720 cells | 406,720 cells | 406,720 cells | 406,720 cells |
| Block RAM | 28,620 Kb | 28,620 Kb | 28,620 Kb | 28,620 Kb | 28,620 Kb |
| User I/O | 500 I/O | 500 I/O | 500 I/O | 500 I/O | 500 I/O |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Special Features | Programmable logic, block RAM, DSP resources, programmable I/O, and high-speed serial transceivers | Same Kintex-7 resource architecture | Same Kintex-7 resource architecture | Same Kintex-7 resource architecture | Same Kintex-7 resource architecture |
מבדילים עיקריים
- Lower-speed grade option within the same FBG900 architecture (לעומתXC7K410T-2FBG900I)
- Commercial temperature ordering code with full 500-I/O connectivity (לעומתXC7K410T-1FBG900I)
- Same-package timing upgrade remains available without a PCB change (לעומתXC7K410T-3FBG900C)
הערות תכנון
Use the AMD power tables for the exact XC7K410T device, -1 speed grade, and implemented I/O activity rather than applying a single current estimate to every design. Decouple each supply rail at the package with the capacitance and placement specified by the device guidance, and preserve the recommended power-and-ground ball connections. Transceiver-enabled banks, high utilization, and fast clocking can materially change dynamic demand, so review the completed implementation before releasing the power system.
FBG900 boards require a thermal path from the FPGA into the substrate, board copper, and enclosure. Analyze the finalized design's activity factor and ambient conditions rather than relying only on nominal logic-cell count. Faster alternatives generally change performance and power characteristics, which can require a different thermal budget. Use the selected device's power and temperature limits to determine whether forced air, heat spreaders, or additional board copper area are necessary.
Do not assign signals from a generic 900-ball library. Import the FBG900 package file and confirm every power, ground, configuration, clock, user I/O, and transceiver ball against the selected speed and temperature ordering code. Review bank constraints before fixing connector and component placement. The high pin count makes escape routing dense, so early package-aware floorplanning can prevent power-plane splits and difficult high-speed routing changes.
Plan high-speed serial and clock routes as controlled-impedance interconnects with reference planes that remain continuous. Follow the AMD package and board-design guidance for transceiver signal paths, termination, connectivity, and isolation. Account for package-ball and PCB losses when choosing I/O standards and data rates. Because the alternatives differ mainly in speed grade, retest timing and signal-integrity margins whenever the device grade changes.
The most common substitution error is treating FBG900 and FFG900 ordering codes as mechanically identical without checking the package documentation. The AMD compatibility information describes meaningful mechanical and temperature-related differences between those packages. Likewise, a same-ball-count device from another FPGA family may have different supply rails, bank assignments, configuration pins, or transceiver ball maps. Approve substitutions only after comparing the exact AMD package files and power architecture.
מידע על תאימות
The exact ordering-code compliance declarations were not identified in the referenced product pages and should be confirmed with AMD before procurement.