XC9536XL-5VQG64C - 5 ns 36-Macrocell CPLD | AMD
MPN: XC9536XL-5VQG64C ✓ AktifXC9536XL-5VQG64C Genel Bakış
A complex programmable logic device, or CPLD, is a programmable-logic semiconductor that combines interconnected macrocells and user I/O into a relatively simple architecture. Within the broader hierarchy, a CPLD is a programmable-logic device, a semiconductor, and an alternative to a field-programmable gate array. Its deterministic timing and electrically erasable configuration memory make it suitable for control logic, interface adaptation, decoding, and state-machine implementations.
The XC9536XL provides 36 macrocells, 36 user I/O pins, 800 usable gates, and a maximum propagation delay of 5 ns. It supports in-system programming with at least 10,000 program or erase cycles. The commercial-grade ordering option covers 0°C to 70°C ambient temperature, while its surface-mount 64-pin TQFP package supports conventional PCB assembly and inspection processes.
Internally, the XC9500XL architecture uses function blocks and I/O blocks to implement programmable Boolean and sequential logic. The device combines a compact 36-macrocell density with in-system programmability and enhanced pin-locking capability, helping preserve pin assignments when designs migrate within supported family options. Its listed 0.35 µm CMOS process represents a mature implementation suited to established CPLD toolchains and stable production platforms.
Typical uses include bus-interface decoding, industrial control logic, data-routing and multiplexing, legacy peripheral glue, and compact control systems where a small gate count and short specified propagation delay are more useful than a large FPGA fabric. The XC9536XL family is especially relevant to designs already using the XC9500 architecture, where preserving software, board layout, and programming methodology can reduce migration effort.
PCB implementation should preserve the exact 64-pin footprint, supply decoupling, programming access, and I/O signal-integrity practices defined for the device. Confirm the I/O standard, supply sequencing, and termination requirements in the AMD XC9536XL DS058 document before releasing a new layout. Because exact pin names and package dimensions are not reproduced on this page, use the manufacturer pin table and package drawings for physical implementation.
This page combines the verified device characteristics, package details, price reference, family alternatives, application guidance, and practical design considerations needed to evaluate the XC9536XL-5VQG64C for an existing programmable-logic design.
Drop-in alternatifler için XC9536XL-5VQG64C — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller XC9536XL-5VQG64C (aynı form faktörü ve ayağa oturma) — farklı olan Package, Number of Macrocells, Usable Gates, Device Type, Lead-Free Status.
XC9536XL-5VQ64C
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
XC9536XL-10VQG64I
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
XC9536XL-7VQG64C
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC9536XL-10VQG64C
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
XC9572XL-5VQG64C
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC9536XL-5VQG64C Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | Complex programmable logic device |
| Programmable Type | In-system programmable |
| Program or Erase Cycle Life | At least 10,000 cycles |
| Macrocell Count | 36 macrocells |
| User I/O Count | 36 I/Os |
| Usable Gate Count | 800 gates |
| Maximum Propagation Delay | 5.0 ns |
| Besleme Gerilimi | 3.3 V |
| Maximum Internal Frequency | 100 MHz |
| Process Technology | 0.35 µm CMOS |
| Paket | 64-pin TQFP |
| Package Code | TFQFP |
| Terminal Count | 64 terminals |
| Montaj Türü | Surface mount |
| Operating Ambient Temperature | 0°C to 70°C |
| Temperature Grade | Commercial |
| AEC-Q100 Qualification | Not applicable |
XC9536XL-5VQG64C tfqfp Pin Yapısı Kılavuzu
XC9536XL-5VQG64C (tfqfp paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: XC9536XL-5VQG64C.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
XC9536XL-5VQG64C için uygundur 6 uygulamas: Industrial Control and Automation Logic, Legacy Peripheral Interface Control, Data Routing and Multiplexing, Power and Battery Management Sequencer, Communication Interface Adaptation, Educational and FPGA Prototyping.
Industrial Control and Automation Logic
The XC9536XL-5VQG64C fits compact industrial control tasks that combine state-machine logic, interlocks, signal decoding, and discrete I/O conditioning. Its 36 macrocells and 36 user I/Os provide enough programmable resources for multiple control paths without using a larger FPGA, while the 5.0 ns maximum propagation delay supports timing designs around a 100 MHz class device. The commercial 0°C to 70°C ordering range is appropriate for temperature-controlled cabinets and factory equipment that remain within that envelope. Designers should partition functions among the available macrocells, reserve pins for configuration and JTAG, and complete worst-case timing checks rather than relying only on average logic depth.
Önerilen
Legacy Peripheral Interface Control
The XC9536XL-5VQG64C is useful for adapting legacy peripherals through address decoding, interrupt control, data latching, and command translation. Thirty-six user I/Os permit multiple interface signals to be consolidated, while the 800 usable gates and 36 macrocells support moderate Boolean and sequential logic. A 5.0 ns maximum propagation delay can support deterministic control paths in applications previously built around small masked-programmable or reprogrammable logic. The design should define each I/O's electrical standard and loading in the AMD DS058 package and pin documentation, and should verify that the selected board revision exposes every required configuration and programming signal.
Önerilen
Data Routing and Multiplexing
The XC9536XL-5VQG64C can implement compact data selectors, bus arbiters, address translators, and routing logic where a small fixed architecture is preferable to a large programmable-logic array. Its 36 macrocells allow multiple control paths and registered stages to coexist, and the 36 user I/Os are sufficient for moderate-width interfaces. The 5 ns speed grade provides a defined propagation-delay ceiling for timing analysis, although actual path delay depends on logic implementation and I/O loading. Engineers should use the manufacturer's timing models and device constraints to check every path, particularly register-to-register transfers and outputs that operate at the 100 MHz internal-frequency class indicated for this family.
Önerilen
Power and Battery Management Sequencer
The XC9536XL-5VQG64C can coordinate power-up sequences, monitor enable signals, generate control pulses, and supervise battery or supply status in a compact embedded control design. The 36 I/Os support external supervisory devices, load switches, and status inputs, while the programmable macrocells implement sequencing and fault logic. A 5.0 ns maximum propagation delay helps keep control events tightly defined relative to the intended power-management sequence. The device itself is a programmable-logic component rather than a voltage regulator, so rail voltage, current capacity, and power-loss behavior must be handled by dedicated power components. Sequencing margins and fault responses should be verified across temperature and all programmed operating states.
Önerilen
Communication Interface Adaptation
The XC9536XL-5VQG64C is appropriate for protocol adapters, command translators, and asynchronous interface glue where a compact CPLD offers more flexibility than fixed logic. Thirty-six I/Os can accommodate multiple chip-select, clock, data, and handshake signals, while the 36 macrocells support framing logic, parity, counters, and state machines. The 5 ns grade can serve moderately fast control paths, but high-speed source-synchronous interfaces require careful pin assignment, signal-integrity analysis, and timing review. Use the manufacturer pin table to maintain compatible JTAG and configuration access, and validate output timing against the external device rather than assuming the internal 100 MHz frequency applies to every I/O path.
Önerilen
Educational and FPGA Prototyping
The XC9536XL-5VQG64C is useful for compact digital-logic laboratories, retrofits, and prototypes that need reprogrammability without a large FPGA. Students can implement counters, finite-state machines, memory-style control tables, and bus-interaction exercises across 36 macrocells and 36 user I/Os. The 5.0 ns maximum propagation delay makes logic timing measurable with standard laboratory instruments, while in-system programmability permits iterative design changes without replacing the device. The 64-pin TQFP footprint is manageable for manual or machine assembly, but access to the device's established programming toolchain and configuration hardware is important. Legacy projects should also verify tool operating-system support and cable compatibility before committing to a new build.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: XC9536XL-5VQG64C — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | XC9536XL-5VQ64C | XC9536XL-10VQG64I | XC9536XL-7VQG64C | XC9536XL-10VQG64C | XC9572XL-5VQG64C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 64-pin TQFP | 64-pin TQFP | 64-pin TQFP | 64-pin TQFP | 64-pin TQFP | 64-pin TQFP |
| Maximum Propagation Delay | 5.0 ns | 5.0 ns | 10 ns | 7 ns | 10 ns | 5.0 ns |
| Device Family | XC9536XL | XC9536XL | XC9536XL | XC9536XL | XC9536XL | XC9572XL |
| Programmable Type | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
Ana Farklılayıcılar
- Faster specified propagation delay than the slower XC9536XL alternatives (karşılaştırma:XC9536XL-7VQG64C)
- Faster specified propagation delay than the 10 ns family options (karşılaştırma:XC9536XL-10VQG64I)
- Exact 5 ns speed grade with the matching 64-pin TQFP footprint (karşılaştırma:XC9536XL-5VQ64C)
- Lower logic density can simplify constrained designs compared with the higher-density family (karşılaştırma:XC9572XL-5VQG64C)
Tasarım Notları
Assign the board layout from the exact 64-pin TQFP drawing in AMD DS058 rather than from a generic 64-pin symbol. Keep JTAG and in-system programming access available, preserve all supply and ground connections, and place decoupling capacitors adjacent to the relevant pins. Because the device has 36 user I/Os rather than 64 user I/Os, verify that fixed-function terminals have not been assigned as general-purpose signals in the schematic or constraint file.
Treat the 5.0 ns figure as a maximum propagation-delay specification, not a guaranteed delay for every path. Analyze register-to-register, input-to-register, and output paths under the intended 3.3 V conditions and board loading. For external interfaces, check setup and hold requirements at the receiving device, maintain controlled clock routing, and avoid relying on the 100 MHz family figure as proof that every I/O can operate at that rate.
Do not assume that matching package names guarantee interchangeable status or pin behavior. The QG, Q, and I ordering suffixes represent different ordering attributes, and a speed-grade change from 5 ns to 7 ns or 10 ns directly changes timing. Before substitution, compare the manufacturer ordering guide, verify configuration compatibility and pin locking, rerun timing analysis, and confirm that the replacement is acceptable for the required temperature and environmental conditions.
Implement the supply network with short, low-inductance connections and place the required bypass capacitors close to the device. Follow the DS058 supply recommendations and verify rail tolerance, startup behavior, and current demand in the complete design. The 3.3 V designation identifies the operating supply for this device; it does not authorize substituting the 5 ns speed-grade suffix with an assumption of 5 V operation.
Uyumluluk Bilgisi
The exact target MPN's RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from its current manufacturer product record. A non-QG family listing states RoHS non-compliance and contains lead, but that status was not transferred to the exact QG target ordering.