XMC4502F100F768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
MPN: XMC4502F100F768ACXQMA1 ✓ AktifXMC4502F100F768ACXQMA1 Genel Bakış
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces onto one device. The XMC4502 belongs to the XMC4000 family and extends the Arm Cortex-M4 architecture into industrial control. This product type provides higher processing performance than basic 8-bit or 16-bit controllers while retaining deterministic operation suited to motor control, industrial communications, and embedded automation.
Key features include a 120 MHz Arm Cortex-M4 processor, 768 KB of flash, a 32-bit architecture, an Ethernet MAC, and support for a 3.3 V operating rail. The 100-pin PG-LQFP package provides access to the digital, analog, timing, communications, and debug resources required by complex control boards. Its industrial positioning makes it appropriate for equipment where predictable control performance and wired network connectivity are important.
The Cortex-M4 processing core supports efficient execution of real-time control algorithms and communication firmware. A dedicated Ethernet MAC allows the microcontroller to participate directly in Ethernet-based industrial networks, reducing the need for a separate network controller in suitable designs. The 768 KB flash capacity provides substantially more program storage than entry-level Cortex-M devices, supporting larger application code, protocol stacks, and boot logic.
Typical uses include industrial Ethernet controllers, programmable automation equipment, motor and motion-control systems, industrial sensor gateways, and networked machine-control panels. The combination of 120 MHz processing and Ethernet MAC support allows designers to consolidate control and communications into one embedded platform while preserving a compact 100-pin surface-mount footprint.
PCB implementation should follow the manufacturer package drawing for pad dimensions, exposed-pad requirements, and recommended land pattern. Decoupling, clock stability, analog grounding, and Ethernet signal routing require careful layout; use the manufacturer datasheet and hardware-design guidance when finalizing the board stack-up and component placement.
This page combines the official product identity, distributor specification details, compatible same-family alternatives, application guidance, and practical engineering considerations to support component selection and board-level implementation.
Drop-in alternatifler için XMC4502F100F768ACXQMA1 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller XMC4502F100F768ACXQMA1 (aynı form faktörü ve ayağa oturma) — farklı olan Package, Product Type, Flash Organization, Flash Memory, Architecture.
XMC4500F100K768ACXQMA1
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XMC4504F100F512ACXQMA1
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
XMC4500F100K1024ACXQSA1
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XMC4400F100K512BAXQMA1
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XMC4400F100F512BAXQMA1
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XMC4502F100F768ACXQMA1 Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | Industrial 32-bit ARM microcontroller |
| Product Series | XMC4000 |
| CPU Core | ARM Cortex-M4 |
| Maximum CPU Frequency | 120 MHz |
| Architecture | 32-bit RISC |
| Flash Memory | 768 KB |
| Flash Organization | 768K x 8 bits |
| Ethernet Interface | Ethernet MAC |
| Besleme Gerilimi | 3.3 V |
| Paket | PG-LQFP-100-11, 100 pins |
| Montaj Türü | Surface mount |
| Temperature Grade | Industrial |
| Core Count | 1 core |
| RoHS Durumu | unknown |
| REACH Status | unknown |
XMC4502F100F768ACXQMA1 pg-lqfp-100-11, 100 pins Pin Yapısı Kılavuzu
XMC4502F100F768ACXQMA1 (pg-lqfp-100-11, 100 pins paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: XMC4502F100F768ACXQMA1.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
XMC4502F100F768ACXQMA1 için uygundur 6 uygulamas: Industrial Ethernet Controllers, Programmable Automation Equipment, Motor and Motion Control, Industrial Sensor Gateways, Networked Machine-Control Panels, Condition Monitoring Systems.
Industrial Ethernet Controllers
The XMC4502F100F768ACXQMA1 fits industrial Ethernet controllers because its 120 MHz Arm Cortex-M4 core can execute control logic while the Ethernet MAC handles network traffic. The 768 KB flash provides room for communication stacks, configuration storage, diagnostics, and application firmware in one package. Placing the controller beside an Ethernet PHY and network isolation components allows a compact embedded network interface without a separate communications processor. The principal trade-off is that software must coordinate real-time control and network servicing, so task priority, buffer use, and interrupt latency should be validated before production.
Önerilen
Programmable Automation Equipment
The XMC4502F100F768ACXQMA1 is appropriate for programmable automation equipment that requires deterministic control and substantial embedded firmware. Its 120 MHz Cortex-M4 core supports faster execution of control loops than lower-frequency general-purpose controllers, while 768 KB of flash accommodates machine sequences, parameter handling, and diagnostics. The 100-pin LQFP package also exposes the broader pin count needed for digital I/O and mixed-signal control functions. Engineering teams should use the exact device pin table to map inputs, outputs, and communications, and should verify the manufacturer’s timing and electrical limits for each connected actuator or sensor.
Önerilen
Motor and Motion Control
The XMC4502F100F768ACXQMA1 can serve as the control processor in motor and motion-control systems where rapid peripheral handling and deterministic firmware execution are important. A 120 MHz Cortex-M4 core provides processing capacity for position loops, current-control algorithms, and supervisory functions, while the 768 KB flash supports control code and parameter tables. Its integrated Ethernet MAC can add remote monitoring or factory-network connectivity without requiring a separate network processor. Actual suitability depends on the device’s timer outputs, analog inputs, motor-control peripherals, and package pin assignments, all of which should be checked against the motor-drive architecture.
Önerilen
Industrial Sensor Gateways
The XMC4502F100F768ACXQMA1 is suited to industrial sensor gateways that collect local measurements, apply filtering or control logic, and forward information over a wired network. Its 768 KB flash capacity is useful for protocol handlers, calibration data, diagnostics, and gateway firmware, while the Ethernet MAC supports direct network participation. The 120 MHz core can process several acquisition and communication tasks concurrently, although the firmware architecture must define priorities to keep time-critical measurements deterministic. Check the exact analog and timer resources before assigning sensors, and follow the manufacturer layout guidance to isolate sensitive analog and clock circuitry.
Önerilen
Networked Machine-Control Panels
The XMC4502F100F768ACXQMA1 supports networked machine-control panels that combine operator-facing control functions with machine communications. Its 120 MHz Cortex-M4 performance can manage logic execution, local I/O, status handling, and Ethernet message processing in one controller. The 768 KB flash provides enough storage for a larger control application than many entry-level MCUs, reducing the need for additional program-memory devices. The design should still reserve pins for panel functions and account for the LQFP-100 footprint, exposed-pad construction, and thermal layout. Confirm peripheral multiplexing and exact terminal assignments against the manufacturer documentation before final schematic capture.
Önerilen
Condition Monitoring Systems
The XMC4502F100F768ACXQMA1 can be used in condition-monitoring equipment that analyzes sensor data locally and communicates results to a supervisory network. The 120 MHz Cortex-M4 core offers sufficient bandwidth for filtering and diagnostic algorithms, while 768 KB flash supports firmware, lookup data, and event logging code. The Ethernet MAC allows monitoring results to be shared without a separate communication controller, which is useful in factories with centralized condition-monitoring infrastructure. Timer, ADC, and communication requirements must be matched to the selected sensors, and the firmware should include safe behavior for disconnected networks and communication errors.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: XMC4502F100F768ACXQMA1 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | XMC4500F100K768ACXQMA1 | XMC4504F100F512ACXQMA1 | XMC4500F100K1024ACXQSA1 | XMC4400F100K512BAXQMA1 | XMC4400F100F512BAXQMA1 |
|---|---|---|---|---|---|---|
| Manufacturer | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-100-11 | PG-LQFP-100 | PG-LQFP-100 | PG-LQFP-100 | PG-LQFP-100 | PG-LQFP-100 |
| CPU Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 |
| Flash Memory | 768 KB | 768 KB | 512 KB | 1024 KB | 512 KB | 512 KB |
| Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC |
Ana Farklılayıcılar
- Higher flash capacity than the 512 KB XMC4504 alternative (karşılaştırma:XMC4504F100F512ACXQMA1)
- Flash-matched same-family choice with 768 KB memory (karşılaştırma:XMC4500F100K768ACXQMA1)
- More program storage than 512 KB XMC4400 options (karşılaştırma:XMC4400F100F512BAXQMA1)
- Documented industrial Ethernet integration (karşılaştırma:XMC4504F100F512ACXQMA1)
Tasarım Notları
Use the exact PG-LQFP-100-11 land pattern from Infineon Technologies rather than a generic 100-pin LQFP footprint. Verify pad length, exposed-pad dimensions, solder-mask clearance, and paste volume against the current package drawing. Place decoupling capacitors close to their associated supply terminals, keep the controller’s exposed thermal area free of unintended copper obstructions, and route high-speed signals away from analog inputs and clock circuitry.
Separate analog, digital, and power-return paths in the board layout. Connect the analog ground and digital ground strategy according to the manufacturer reference design, provide a clean return for the 3.3 V supply, and place the external clock components where their short, symmetrical traces minimize distortion. Ethernet differential traces must follow the guidance for the selected PHY and connector because the MCU’s Ethernet MAC does not determine the complete physical-layer layout.
Do not treat same-package XMC devices as automatically interchangeable. Verify the complete 100-pin assignment, exposed-pad connection, peripheral multiplexing, clock configuration, memory requirements, and qualification code before substituting XMC4500, XMC4504, or XMC4400 variants. In particular, changing from 768 KB to 512 KB flash can break an existing bootloader layout, while moving to 1024 KB requires linker and boot-memory planning even if the package remains unchanged.
The LQFP exposed-pad construction is important for heat transfer from the Cortex-M4 core. Implement the manufacturer’s thermal-pad and via pattern, connect the exposed pad as specified, and use surrounding copper without violating electrical-clearance requirements. Temperature rise depends on processor activity, supply voltage, ambient temperature, board copper, and package construction, so thermal validation should use the final PCB rather than a generic estimate based only on package area.
Uyumluluk Bilgisi
The manufacturer identifies XMC4502-F100F768-AC as an industrial microcontroller, but the listed product information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.