XMC4502F100F768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
MPN: XMC4502F100F768ACXQMA1 ✓ 啟用中XMC4502F100F768ACXQMA1 概覽
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces onto one device. The XMC4502 belongs to the XMC4000 family and extends the Arm Cortex-M4 architecture into industrial control. This product type provides higher processing performance than basic 8-bit or 16-bit controllers while retaining deterministic operation suited to motor control, industrial communications, and embedded automation.
Key features include a 120 MHz Arm Cortex-M4 processor, 768 KB of flash, a 32-bit architecture, an Ethernet MAC, and support for a 3.3 V operating rail. The 100-pin PG-LQFP package provides access to the digital, analog, timing, communications, and debug resources required by complex control boards. Its industrial positioning makes it appropriate for equipment where predictable control performance and wired network connectivity are important.
The Cortex-M4 processing core supports efficient execution of real-time control algorithms and communication firmware. A dedicated Ethernet MAC allows the microcontroller to participate directly in Ethernet-based industrial networks, reducing the need for a separate network controller in suitable designs. The 768 KB flash capacity provides substantially more program storage than entry-level Cortex-M devices, supporting larger application code, protocol stacks, and boot logic.
Typical uses include industrial Ethernet controllers, programmable automation equipment, motor and motion-control systems, industrial sensor gateways, and networked machine-control panels. The combination of 120 MHz processing and Ethernet MAC support allows designers to consolidate control and communications into one embedded platform while preserving a compact 100-pin surface-mount footprint.
PCB implementation should follow the manufacturer package drawing for pad dimensions, exposed-pad requirements, and recommended land pattern. Decoupling, clock stability, analog grounding, and Ethernet signal routing require careful layout; use the manufacturer datasheet and hardware-design guidance when finalizing the board stack-up and component placement.
This page combines the official product identity, distributor specification details, compatible same-family alternatives, application guidance, and practical engineering considerations to support component selection and board-level implementation.
直接替換替代品,適用於 XMC4502F100F768ACXQMA1 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XMC4502F100F768ACXQMA1 (相同外形與佔位) — 差異在於 Package, Product Type, Flash Organization, Flash Memory, Architecture.
XMC4500F100K768ACXQMA1
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XMC4504F100F512ACXQMA1
✅ 直接替換📋 參考替代品(不在目錄中)
XMC4500F100K1024ACXQSA1
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XMC4400F100K512BAXQMA1
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XMC4400F100F512BAXQMA1
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XMC4502F100F768ACXQMA1 最大額定值與電氣特性
| Product Type | Industrial 32-bit ARM microcontroller |
| Product Series | XMC4000 |
| CPU Core | ARM Cortex-M4 |
| Maximum CPU Frequency | 120 MHz |
| Architecture | 32-bit RISC |
| Flash Memory | 768 KB |
| Flash Organization | 768K x 8 bits |
| Ethernet Interface | Ethernet MAC |
| 供應電壓 | 3.3 V |
| 封裝 | PG-LQFP-100-11, 100 pins |
| 安裝類型 | Surface mount |
| Temperature Grade | Industrial |
| Core Count | 1 core |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
XMC4502F100F768ACXQMA1 pg-lqfp-100-11, 100 pins 腳位配置指南
XMC4502F100F768ACXQMA1(pg-lqfp-100-11, 100 pins 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XMC4502F100F768ACXQMA1.
請參閱 資料表 以查看完整腳位配置。
典型應用
XMC4502F100F768ACXQMA1 適用於 6 應用s: Industrial Ethernet Controllers, Programmable Automation Equipment, Motor and Motion Control, Industrial Sensor Gateways, Networked Machine-Control Panels, Condition Monitoring Systems.
Industrial Ethernet Controllers
The XMC4502F100F768ACXQMA1 fits industrial Ethernet controllers because its 120 MHz Arm Cortex-M4 core can execute control logic while the Ethernet MAC handles network traffic. The 768 KB flash provides room for communication stacks, configuration storage, diagnostics, and application firmware in one package. Placing the controller beside an Ethernet PHY and network isolation components allows a compact embedded network interface without a separate communications processor. The principal trade-off is that software must coordinate real-time control and network servicing, so task priority, buffer use, and interrupt latency should be validated before production.
推薦
Programmable Automation Equipment
The XMC4502F100F768ACXQMA1 is appropriate for programmable automation equipment that requires deterministic control and substantial embedded firmware. Its 120 MHz Cortex-M4 core supports faster execution of control loops than lower-frequency general-purpose controllers, while 768 KB of flash accommodates machine sequences, parameter handling, and diagnostics. The 100-pin LQFP package also exposes the broader pin count needed for digital I/O and mixed-signal control functions. Engineering teams should use the exact device pin table to map inputs, outputs, and communications, and should verify the manufacturer’s timing and electrical limits for each connected actuator or sensor.
推薦
Motor and Motion Control
The XMC4502F100F768ACXQMA1 can serve as the control processor in motor and motion-control systems where rapid peripheral handling and deterministic firmware execution are important. A 120 MHz Cortex-M4 core provides processing capacity for position loops, current-control algorithms, and supervisory functions, while the 768 KB flash supports control code and parameter tables. Its integrated Ethernet MAC can add remote monitoring or factory-network connectivity without requiring a separate network processor. Actual suitability depends on the device’s timer outputs, analog inputs, motor-control peripherals, and package pin assignments, all of which should be checked against the motor-drive architecture.
推薦
Industrial Sensor Gateways
The XMC4502F100F768ACXQMA1 is suited to industrial sensor gateways that collect local measurements, apply filtering or control logic, and forward information over a wired network. Its 768 KB flash capacity is useful for protocol handlers, calibration data, diagnostics, and gateway firmware, while the Ethernet MAC supports direct network participation. The 120 MHz core can process several acquisition and communication tasks concurrently, although the firmware architecture must define priorities to keep time-critical measurements deterministic. Check the exact analog and timer resources before assigning sensors, and follow the manufacturer layout guidance to isolate sensitive analog and clock circuitry.
推薦
Networked Machine-Control Panels
The XMC4502F100F768ACXQMA1 supports networked machine-control panels that combine operator-facing control functions with machine communications. Its 120 MHz Cortex-M4 performance can manage logic execution, local I/O, status handling, and Ethernet message processing in one controller. The 768 KB flash provides enough storage for a larger control application than many entry-level MCUs, reducing the need for additional program-memory devices. The design should still reserve pins for panel functions and account for the LQFP-100 footprint, exposed-pad construction, and thermal layout. Confirm peripheral multiplexing and exact terminal assignments against the manufacturer documentation before final schematic capture.
推薦
Condition Monitoring Systems
The XMC4502F100F768ACXQMA1 can be used in condition-monitoring equipment that analyzes sensor data locally and communicates results to a supervisory network. The 120 MHz Cortex-M4 core offers sufficient bandwidth for filtering and diagnostic algorithms, while 768 KB flash supports firmware, lookup data, and event logging code. The Ethernet MAC allows monitoring results to be shared without a separate communication controller, which is useful in factories with centralized condition-monitoring infrastructure. Timer, ADC, and communication requirements must be matched to the selected sensors, and the firmware should include safe behavior for disconnected networks and communication errors.
推薦
推薦產品摘要
工程參考資料,適用於 XMC4502F100F768ACXQMA1 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XMC4500F100K768ACXQMA1 | XMC4504F100F512ACXQMA1 | XMC4500F100K1024ACXQSA1 | XMC4400F100K512BAXQMA1 | XMC4400F100F512BAXQMA1 |
|---|---|---|---|---|---|---|
| Manufacturer | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-100-11 | PG-LQFP-100 | PG-LQFP-100 | PG-LQFP-100 | PG-LQFP-100 | PG-LQFP-100 |
| CPU Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 |
| Flash Memory | 768 KB | 768 KB | 512 KB | 1024 KB | 512 KB | 512 KB |
| Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC |
主要差異化特點
- Higher flash capacity than the 512 KB XMC4504 alternative (對比XMC4504F100F512ACXQMA1)
- Flash-matched same-family choice with 768 KB memory (對比XMC4500F100K768ACXQMA1)
- More program storage than 512 KB XMC4400 options (對比XMC4400F100F512BAXQMA1)
- Documented industrial Ethernet integration (對比XMC4504F100F512ACXQMA1)
設計說明
Use the exact PG-LQFP-100-11 land pattern from Infineon Technologies rather than a generic 100-pin LQFP footprint. Verify pad length, exposed-pad dimensions, solder-mask clearance, and paste volume against the current package drawing. Place decoupling capacitors close to their associated supply terminals, keep the controller’s exposed thermal area free of unintended copper obstructions, and route high-speed signals away from analog inputs and clock circuitry.
Separate analog, digital, and power-return paths in the board layout. Connect the analog ground and digital ground strategy according to the manufacturer reference design, provide a clean return for the 3.3 V supply, and place the external clock components where their short, symmetrical traces minimize distortion. Ethernet differential traces must follow the guidance for the selected PHY and connector because the MCU’s Ethernet MAC does not determine the complete physical-layer layout.
Do not treat same-package XMC devices as automatically interchangeable. Verify the complete 100-pin assignment, exposed-pad connection, peripheral multiplexing, clock configuration, memory requirements, and qualification code before substituting XMC4500, XMC4504, or XMC4400 variants. In particular, changing from 768 KB to 512 KB flash can break an existing bootloader layout, while moving to 1024 KB requires linker and boot-memory planning even if the package remains unchanged.
The LQFP exposed-pad construction is important for heat transfer from the Cortex-M4 core. Implement the manufacturer’s thermal-pad and via pattern, connect the exposed pad as specified, and use surrounding copper without violating electrical-clearance requirements. Temperature rise depends on processor activity, supply voltage, ambient temperature, board copper, and package construction, so thermal validation should use the final PCB rather than a generic estimate based only on package area.
合規資訊
The manufacturer identifies XMC4502-F100F768-AC as an industrial microcontroller, but the listed product information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.