MAX338CSE+T vs MAX339CSE+ موازنہ
تفصیلی ساتھ ساتھ موازنہ از MAX338CSE+T بذریعہ Analog Devices اور MAX339CSE+ بذریعہ Analog Devices. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
Analog Devices
MAX339CSE+ - Dual 4:1 Low-Leakage Analog Multiplexer | Analog Devices
MAX339CSE+ ✓ فعالخصوصیات کا موازنہ
| پیرامیٹر | MAX338CSE+T | MAX339CSE+ |
|---|---|---|
| برانڈ | Analog Devices | Analog Devices |
| زمرہ | Interface ICs | Interface ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Multiplexer Configuration | 8:1 | Dual 4:1 |
| Number of Circuits | 1 circuit | — |
| Number of Channels | 8 channels | — |
| Maximum On-Resistance | 400 ohm | — |
| Single-Supply Operating Range | +4.5 V to +30 V | — |
| Dual-Supply Operating Range | ±4.5 V to ±20 V | — |
| TTL Input Logic High | +0.8 V to +2.4 V | — |
| Process Technology | 44 V silicon-gate CMOS process | 44 V silicon-gate CMOS process |
| Switch Type | CMOS analog multiplexer | — |
| Signal Direction | Bidirectional conduction | — |
| پیکیج | 16-pin narrow SOIC | 16-pin NSOIC |
| ماؤنٹنگ ٹائپ | Surface mount | Surface mount |
| آپریٹنگ درجہ حرارت رینج | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Channel Leakage Current | [DATA_NEEDED: channel leakage current] | — |
| Charge Injection | [DATA_NEEDED: charge injection] | [DATA_NEEDED: charge injection] |
| Off-Isolation | [DATA_NEEDED: off-isolation] | — |
| Enable Control | [DATA_NEEDED: enable control configuration] | — |
| Standard Reel Quantity | [DATA_NEEDED: standard reel quantity] | — |
| RoHS اسٹیٹس | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Total Channels | — | 8 |
| Architecture | — | CMOS analog multiplexer |
| On-Resistance | — | 650 ohms maximum |
| Single-Supply Voltage Range | — | 4.5 V to 30 V |
| Dual-Supply Voltage Range | — | ±4.5 V to ±20 V |
| Control Input Compatibility | — | TTL compatible |
| Control Input Logic Range | — | 0.8 V to 2.4 V |
| Address Inputs per Multiplexer | — | 2 binary inputs |
| Enable Inputs | — | Active-low control inputs |
| Operating Mode | — | Multiplexer or demultiplexer |
| Leakage Current | — | [DATA_NEEDED: leakage current] |
| On-Time | — | [DATA_NEEDED: on-time] |
| Off-Time | — | [DATA_NEEDED: off-time] |
| REACH Status | — | [DATA_NEEDED: REACH status] |