MAX338CSE+T vs MAX339CSE+ مقایسه
مقایسه دقیق کنار به کنار MAX338CSE+T توسط Analog Devices و MAX339CSE+ توسط Analog Devices. مشخصات کلیدی، پارامترهای الکتریکی، بستهبندی، وضعیت چرخه عمر، قیمتگذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
Analog Devices
MAX339CSE+ - Dual 4:1 Low-Leakage Analog Multiplexer | Analog Devices
MAX339CSE+ ✓ فعالمقایسه مشخصات
| پارامتر | MAX338CSE+T | MAX339CSE+ |
|---|---|---|
| برند | Analog Devices | Analog Devices |
| دستهبندی | Interface ICs | Interface ICs |
| وضعیت چرخه عمر | فعال | فعال |
| Multiplexer Configuration | 8:1 | Dual 4:1 |
| Number of Circuits | 1 circuit | — |
| Number of Channels | 8 channels | — |
| Maximum On-Resistance | 400 ohm | — |
| Single-Supply Operating Range | +4.5 V to +30 V | — |
| Dual-Supply Operating Range | ±4.5 V to ±20 V | — |
| TTL Input Logic High | +0.8 V to +2.4 V | — |
| Process Technology | 44 V silicon-gate CMOS process | 44 V silicon-gate CMOS process |
| Switch Type | CMOS analog multiplexer | — |
| Signal Direction | Bidirectional conduction | — |
| بستهبندی | 16-pin narrow SOIC | 16-pin NSOIC |
| نوع نصب | Surface mount | Surface mount |
| محدوده دمای کاری | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Channel Leakage Current | [DATA_NEEDED: channel leakage current] | — |
| Charge Injection | [DATA_NEEDED: charge injection] | [DATA_NEEDED: charge injection] |
| Off-Isolation | [DATA_NEEDED: off-isolation] | — |
| Enable Control | [DATA_NEEDED: enable control configuration] | — |
| Standard Reel Quantity | [DATA_NEEDED: standard reel quantity] | — |
| وضعیت RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Total Channels | — | 8 |
| Architecture | — | CMOS analog multiplexer |
| On-Resistance | — | 650 ohms maximum |
| Single-Supply Voltage Range | — | 4.5 V to 30 V |
| Dual-Supply Voltage Range | — | ±4.5 V to ±20 V |
| Control Input Compatibility | — | TTL compatible |
| Control Input Logic Range | — | 0.8 V to 2.4 V |
| Address Inputs per Multiplexer | — | 2 binary inputs |
| Enable Inputs | — | Active-low control inputs |
| Operating Mode | — | Multiplexer or demultiplexer |
| Leakage Current | — | [DATA_NEEDED: leakage current] |
| On-Time | — | [DATA_NEEDED: on-time] |
| Off-Time | — | [DATA_NEEDED: off-time] |
| REACH Status | — | [DATA_NEEDED: REACH status] |