MAX3485CPA+ vs MAX3485EPA+ موازنہ
تفصیلی ساتھ ساتھ موازنہ از MAX3485CPA+ بذریعہ Maxim Integrated اور MAX3485EPA+ بذریعہ Analog Devices. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
خصوصیات کا موازنہ
| پیرامیٹر | MAX3485CPA+ | MAX3485EPA+ |
|---|---|---|
| برانڈ | Maxim Integrated | Analog Devices |
| زمرہ | Interface ICs | Interface ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 interface transceiver |
| سپلائی وولٹیج | 3.3 V | — |
| ڈیٹا ریٹ | Up to 10 Mbps | — |
| Driver and Receiver Count | 1 driver and 1 receiver | — |
| Communication Standard | RS-485 and RS-422 | — |
| Driver Architecture | Slew-rate limited | — |
| پیکیج | 8-pin PDIP | 8-pin PDIP |
| ماؤنٹنگ ٹائپ | Through hole | Through-hole |
| Transceiver Configuration | Half-duplex transceiver | — |
| Low-Power Operation | 3.3 V low-power transceiver | — |
| EMI and Reflection Control | Slew-rate-limited driver intended to minimize EMI and cable reflections | — |
| آپریٹنگ درجہ حرارت | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| ESD Protection | [DATA_NEEDED: device ESD rating] | [DATA_NEEDED: ESD protection rating] |
| سپلائی کرنٹ | [DATA_NEEDED: typical and maximum supply current] | — |
| Driver Differential Output | [DATA_NEEDED: differential output voltage specifications] | — |
| Receiver Input Range | [DATA_NEEDED: receiver differential input range] | — |
| Common-Mode Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Slew Rate | [DATA_NEEDED: driver slew-rate value] | — |
| RoHS اسٹیٹس | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Transmission Data Rate | — | Up to 10 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Supported Standards | — | RS-422 and RS-485 |
| Driver Protection | — | Short-circuit current limiting and thermal shutdown |
| Driver Output State During Thermal Shutdown | — | High impedance |
| Driver Slew Control | — | Slew-rate limited |
| Receiver Fail-Safe Feature | — | Yes |
| Operating Voltage | — | 3.3 V nominal |
| Power Dissipation | — | [DATA_NEEDED: power dissipation specification] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |