MAX3490CSA+ vs SN75176 موازنہ
تفصیلی ساتھ ساتھ موازنہ از MAX3490CSA+ بذریعہ Analog Devices اور SN75176 بذریعہ Texas Instruments. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
Texas Instruments
SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments
SN75176 ✓ فعالخصوصیات کا موازنہ
| پیرامیٹر | MAX3490CSA+ | SN75176 |
|---|---|---|
| برانڈ | Analog Devices | Texas Instruments |
| زمرہ | Interface ICs | Interface ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Product Type | RS-422/RS-485 interface transceiver | — |
| سپلائی وولٹیج | 3.3 V | — |
| ڈیٹا ریٹ | 10 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Supported Standards | RS-422 and RS-485 | — |
| Driver Type | Slew-rate-limited true RS-485/RS-422 driver | — |
| پیکیج | 8-pin SOIC | 8-pin PDIP (P) |
| ماؤنٹنگ ٹائپ | Surface Mount | Through-Hole |
| Communication Mode | Differential | — |
| Network Capability | RS-422 point-to-point and RS-485 multipoint | — |
| Power Consumption | [DATA_NEEDED: quiescent current and supply current] | — |
| Common-Mode Range | [DATA_NEEDED: common-mode voltage range] | — |
| Driver Output Current | [DATA_NEEDED: output current] | ±60 mA (max) |
| Receiver Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| آپریٹنگ درجہ حرارت رینج | [DATA_NEEDED: operating temperature range] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Termination | External network termination required for RS-485 applications | — |
| RoHS اسٹیٹس | [DATA_NEEDED: RoHS compliance] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance] | — |
| AEC-Q100 Qualification | not_applicable | — |
| فنکشن | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Receiver Hysteresis | — | 50 mV (typical) |
| Supply Voltage (Vcc) | — | 4.75 V to 5.25 V |
| آپریٹنگ درجہ حرارت | — | 0 °C to +70 °C |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold | — | ±200 mV |
| Quiescent Supply Current (enabled) | — | 30 mA (typical) |
| Shutdown Supply Current | — | 1 µA (typical) |
| Standards Compliance | — | ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 |