MAX3490CSA+ vs SN75176 مقایسه
مقایسه دقیق کنار به کنار MAX3490CSA+ توسط Analog Devices و SN75176 توسط Texas Instruments. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
Texas Instruments
SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments
SN75176 ✓ فعالمقایسه مشخصات
| پارامتر | MAX3490CSA+ | SN75176 |
|---|---|---|
| برند | Analog Devices | Texas Instruments |
| دسته‌بندی | Interface ICs | Interface ICs |
| وضعیت چرخه عمر | فعال | فعال |
| Product Type | RS-422/RS-485 interface transceiver | — |
| ولتاژ تغذیه | 3.3 V | — |
| نرخ داده | 10 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Supported Standards | RS-422 and RS-485 | — |
| Driver Type | Slew-rate-limited true RS-485/RS-422 driver | — |
| بسته‌بندی | 8-pin SOIC | 8-pin PDIP (P) |
| نوع نصب | Surface Mount | Through-Hole |
| Communication Mode | Differential | — |
| Network Capability | RS-422 point-to-point and RS-485 multipoint | — |
| Power Consumption | [DATA_NEEDED: quiescent current and supply current] | — |
| Common-Mode Range | [DATA_NEEDED: common-mode voltage range] | — |
| Driver Output Current | [DATA_NEEDED: output current] | ±60 mA (max) |
| Receiver Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| محدوده دمای کاری | [DATA_NEEDED: operating temperature range] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Termination | External network termination required for RS-485 applications | — |
| وضعیت RoHS | [DATA_NEEDED: RoHS compliance] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance] | — |
| AEC-Q100 Qualification | not_applicable | — |
| عملکرد | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Receiver Hysteresis | — | 50 mV (typical) |
| Supply Voltage (Vcc) | — | 4.75 V to 5.25 V |
| دمای کاری | — | 0 °C to +70 °C |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold | — | ±200 mV |
| Quiescent Supply Current (enabled) | — | 30 mA (typical) |
| Shutdown Supply Current | — | 1 µA (typical) |
| Standards Compliance | — | ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 |