VND7E050AJTR vs VNQ660SPTR-E موازنہ
تفصیلی ساتھ ساتھ موازنہ از VND7E050AJTR بذریعہ STMicroelectronics اور VNQ660SPTR-E بذریعہ STMicroelectronics. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
STMicroelectronics
VND7E050AJTR - Dual 50A High-Side Driver | STMicroelectronics
VND7E050AJTR ✓ فعالSTMicroelectronics
VNQ660SPTR-E - Quad 6A High-Side Smart Power Switch | STMicroelectronics
VNQ660SPTR-E ✓ فعالخصوصیات کا موازنہ
| پیرامیٹر | VND7E050AJTR | VNQ660SPTR-E |
|---|---|---|
| برانڈ | STMicroelectronics | STMicroelectronics |
| زمرہ | Motor Drivers | Power MOSFET Drivers |
| لائف سائیکل کی حالت | فعال | فعال |
| ٹوپولوجی | Dual-channel high-side driver (HSD) | — |
| Technology | STMicroelectronics VIPower M0-7 | ST VIPower M0-3 (vertical DMOS) |
| Number of Channels | 2 | 4 |
| Continuous Load Current per Channel | 50 A | — |
| Operating Voltage (VCC) | 4 V to 28 V (automotive 12 V nominal) | — |
| Logic Input Compatibility | 3 V and 5 V CMOS | — |
| Standby Current | [DATA_NEEDED: standby current value] | — |
| On-State Resistance (Ron) per Channel | [DATA_NEEDED: Ron value] | — |
| Current Sense Output | Analog multiplexed CS pin (load current, VCC, temperature) | — |
| Fault Reset (FaultRST) | Active-low CMOS-compatible input | — |
| Protections | Load current limitation, overload active power limitation, overtemperature shutdown with configurable latch-off, reverse battery, load dump | — |
| Diagnostics | Open-load, short-to-ground, short-to-VCC, overload, overtemperature | — |
| پیکیج | PowerSSO-16 (16-pin exposed-pad) | PowerSO-10 with exposed bottom pad |
| آپریٹنگ درجہ حرارت | -40 C to +150 C junction | -40 C to +125 C |
| Automotive Qualification | AEC-Q100 targeted (VND7E050AJ family automotive grade) | — |
| ماؤنٹنگ ٹائپ | Surface Mount | Surface Mount |
| RoHS اسٹیٹس | Compliant | Compliant |
| فنکشن | — | Quad-channel high-side solid-state relay |
| Switch Type | — | High-side N-channel power MOSFET |
| Supply Voltage (VCC) | — | 6 V to 36 V |
| Maximum Continuous Output Current (per channel) | — | 6 A |
| On-State Resistance (RDS(on)) | — | 40 mOhm typical (per channel) |
| Input Compatibility | — | CMOS logic-level inputs |
| Protection Features | — | Thermal shutdown, overvoltage clamp, undervoltage shutdown, open-load detection (off state), reverse battery protection |
| Status Feedback | — | Analog status flag per channel |
| Off-State Quiescent Current | — | [DATA_NEEDED: standby Iq] |
| Maximum Power Dissipation | — | 113.6 W (with proper thermal design) |