5M80ZT100C4N - MAX V 80 LE CPLD 7.5ns 64MC TQFP-100 | Intel
MPN: 5M80ZT100C4N ✓ فعال5M80ZT100C4N جائزہ
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits hierarchically between simple SPLDs (Simple PLDs like PAL/GAL) and large FPGAs (Field Programmable Gate Arrays). CPLDs offer instant-on configuration from on-chip flash, deterministic timing with predictable pin-to-pin delays, and high fan-in macrocell architecture - making them ideal for control-plane logic, address decoding, and peripheral interfacing rather than data-path DSP. Within the power management and board-level design hierarchy, CPLDs often replace discrete 74-series logic, saving board area and BOM cost.
Key features include 80 logic elements, 64 macrocells, 4 global clocks, a built-in 8 Kbit user flash memory block, on-chip voltage regulator supporting 1.8 V/2.5 V/3.3 V I/O standards, and MultiVolt core support allowing mixed-voltage operation. The device operates from a single 1.8 V core supply with I/O banks configurable to 1.5 V, 1.8 V, 2.5 V, or 3.3 V, simplifying interfacing with legacy 5 V-tolerant buses through level shifters.
The 5M80ZT100C4N uses a non-volatile flash-based configuration cell so it behaves like an ASIC at power-up with zero configuration time, in contrast to SRAM-based FPGAs that require external boot memory. The 100-pin TQFP package exposes 79 user I/O pins and supports LVCMOS, LVTTL, PCI, and SSTL I/O standards, enabling direct connection to microprocessors, memory buses, and parallel peripherals.
Typical applications include I/O expansion and level translation in industrial controllers, address decoding in legacy 8051/ARM designs, power-sequencing logic in telecom line cards, and LED display multiplexing in signage. The instant-on flash architecture is particularly suited to safety-critical systems where FPGA boot time is unacceptable.
When designing with this device, observe the I/O bank voltage constraints - mixing 3.3 V and 1.8 V signals requires careful VCCIO planning. Use Quartus II or the Intel Quartus Prime Lite Edition for synthesis; JTAG programming via the dedicated 4-wire JTAG port enables in-system reconfiguration without external boot devices.
This page synthesizes distributor pricing, drop-in alternatives from the MAX V family, and practical design notes not found in the standalone datasheet - giving engineers a single reference for sourcing, replacement, and layout decisions.
کے لیے ڈراپ اِن متبادل 5M80ZT100C4N — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں 5M80ZT100C4N (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Configuration Memory, MSL Level, Programming Interface, User Flash Memory.
5M80ZT100I5N
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →5M80ZT100A5N
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →5M80ZT100C5N
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →5M160ZT100C4N
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →5M240ZT100C4N
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →5M570ZT100C4N
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →5M80ZT100C4N زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Family | MAX V |
| Logic Elements (LEs) | 80 |
| Macrocells | 64 |
| Pin-to-Pin Delay (tPD) | 7.5 ns |
| Maximum User I/O Pins | 79 |
| Number of Global Clocks | 4 |
| User Flash Memory | 8 Kbit |
| Core Voltage (VCCINT) | 1.8 V |
| I/O Voltage (VCCIO) | 1.5 V / 1.8 V / 2.5 V / 3.3 V |
| پیکیج | TQFP-100 (T100) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| آپریٹنگ درجہ حرارت | 0C to +85C (Commercial) |
| Process Technology | 0.18 µm flash CMOS |
| Configuration Method | Non-volatile flash (instant-on) |
| Programming Interface | JTAG (IEEE 1149.1) |
| RoHS اسٹیٹس | Compliant |
5M80ZT100C4N tqfp-100 (t100) پن کنفیگریشن گائیڈ
5M80ZT100C4N (tqfp-100 (t100) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں 5M80ZT100C4N.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
5M80ZT100C4N کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control I/O Expansion, Address Decoding and Glue Logic, Power Sequencing and Supervisory Logic, Bus Bridging and Protocol Conversion, LED Display Multiplexing and Signage, Consumer Electronics Glue Logic.
Industrial Control I/O Expansion
The 5M80ZT100C4N's 79 user I/O pins and 80 logic elements make it well-suited for industrial PLC I/O expansion modules where multiple 24V field signals must be debounced, multiplexed, and translated to 3.3V logic. Its 7.5 ns tPD delivers deterministic response for high-speed encoder inputs, while the 1.8V core with 3.3V-tolerant I/O banks interface directly to industrial microcontrollers without external level shifters. The non-volatile flash configuration eliminates FPGA boot latency, enabling instant-on safety responses required by IEC 61131-3 industrial control standards.
تجویز کردہ
Address Decoding and Glue Logic
In legacy 8051, ARM7, and PowerPC designs, the 5M80ZT100C4N replaces multiple 74-series GAL/PAL devices by consolidating address decoding, chip-select generation, and wait-state insertion into a single 100-pin TQFP. The 64 macrocells provide ample product-term capacity for complex decode trees spanning up to 16 address bits, while the 7.5 ns tPD adds minimal access-time penalty. Programmable I/O voltage banks allow direct connection to both 5V-tolerant and 3.3V memory buses, simplifying mixed-voltage board designs.
تجویز کردہ
Power Sequencing and Supervisory Logic
Telecom line cards and server motherboards require precise power-rail sequencing to meet Intel VRM and AMD SVI specifications; the 5M80ZT100C4N's 80 logic elements and 4 global clocks provide ample capacity to sequence 8-12 voltage rails with programmable delays. Its instant-on flash architecture ensures supervisory logic is active before any downstream MCU boots, critical for hot-swap and N+1 redundant power designs. The 1.8V core with MultiVolt I/O allows direct interface to both legacy 3.3V supervisors and modern 1.0V POL regulators.
تجویز کردہ
Bus Bridging and Protocol Conversion
The 5M80ZT100C4N bridges legacy parallel buses (ISA, PC/104, local SRAM) to modern serial interfaces (SPI, I2C, UART) in industrial upgrade modules, providing protocol translation without an expensive microprocessor subsystem. Its 7.5 ns tPD supports bus speeds up to ~66 MHz, while 79 user I/O pins accommodate wide parallel data paths plus multiple serial channels. The deterministic flash-based configuration delivers predictable bridge latency for real-time fieldbus protocols like Profibus and CANopen used in factory automation.
تجویز کردہ
LED Display Multiplexing and Signage
Large LED matrix displays and dynamic signage require high-frequency row/column multiplexing with consistent timing; the 5M80ZT100C4N's 4 global clocks and 79 user I/O pins drive 8:1 to 16:1 multiplex ratios for displays up to 32x64 pixels per device. The 7.5 ns tPD supports PWM dimming frequencies above 1 MHz, enabling 16-bit grayscale without visible flicker. Commercial 0C to +85C temperature range suits indoor and semi-outdoor installations, while non-volatile configuration allows pattern updates via JTAG without external boot memory.
تجویز کردہ
Consumer Electronics Glue Logic
In set-top boxes, home gateways, and printer controllers, the 5M80ZT100C4N consolidates discrete logic implementing HDMI handshake sequencing, USB port power switching, and peripheral chip-select generation. Its 1.8V core with selectable 3.3V I/O banks interface directly to HDMI controllers and USB power switches without external level translation. The instant-on flash architecture eliminates cold-start latency in always-on consumer devices, while the commercial temperature range suits indoor operating environments.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا 5M80ZT100C4N — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | 5M80ZT100I5N | 5M80ZT100A5N | 5M80ZT100C5N | 5M160ZT100C4N | 5M240ZT100C4N | 5M570ZT100C4N |
|---|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | TQFP-100 (T100) | TQFP-100 (T100) - same | TQFP-100 (T100) - same | TQFP-100 (T100) - same | TQFP-100 (T100) - same | TQFP-100 (T100) - same | TQFP-100 (T100) - same |
| Logic Elements (LEs) | 80 | 80 | 80 | 80 | 160 | 240 | 570 |
| Macrocells | 64 | 64 | 64 | 64 | 128 | 192 | 440 |
| Pin-to-Pin Delay (tPD) | 7.5 ns | 7.5 ns | 7.5 ns | 5.5 ns | 7.5 ns | 7.5 ns | 7.5 ns |
| Maximum User I/O | 79 | 79 | 79 | 79 | 79 | 79 | 79 |
| Core Voltage (VCCINT) | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Operating Temperature | 0C to +85C (Commercial) | -40C to +100C (Industrial) | -40C to +125C (Automotive) | 0C to +85C (Commercial) | 0C to +85C (Commercial) | 0C to +85C (Commercial) | 0C to +85C (Commercial) |
| Configuration Method | Non-volatile flash (instant-on) | Non-volatile flash (instant-on) | Non-volatile flash (instant-on) | Non-volatile flash (instant-on) | Non-volatile flash (instant-on) | Non-volatile flash (instant-on) | Non-volatile flash (instant-on) |
اہم امتیازی خصوصیات
- Smallest MAX V density in TQFP-100 footprint (بمقابلہ5M160ZT100C4N)
- Instant-on flash configuration vs SRAM FPGA boot time (بمقابلہ5CSXFC6C6U23C8N (Cyclone V FPGA))
- Lower quiescent current than FPGA alternatives (بمقابلہ5CSEBA6U23C8N (Cyclone V SoC))
ڈیزائن نوٹس
The 5M80ZT100C4N requires a clean 1.8V VCCINT supply with a maximum tolerance of ±5%; ripple above 50 mVpp can cause JTAG programming failures and marginal tPD timing. Decouple VCCINT with one 10 µF bulk + one 0.1 µF ceramic per pin pair, placed within 5 mm of the package. Each VCCIO bank should have its own 0.1 µF + 1 µF ceramic pair to suppress simultaneous-switching-output (SSO) noise when driving multiple LVTTL outputs at once.
The 100-pin TQFP package has a 0.5 mm pitch requiring fine PCB fabrication - specify 4-mil (0.1 mm) trace width with 4-mil spacing and use ENIG surface finish for reliable assembly. Route JTAG signals (TCK, TMS, TDI, TDO) with ground guard traces to prevent crosstalk from adjacent high-frequency I/O. Place a 4.7 kΩ pull-up on TMS and TDI to keep the JTAG state machine in known state during power-up, per IEEE 1149.1 boundary-scan requirements.
Do not mix 3.3V and 1.8V signals on the same VCCIO bank - each bank supports a single voltage level; mis-wiring can permanently damage I/O cells. The non-volatile flash programming requires VCCINT to ramp monotonically within the 0.2-50 ms range; slow or oscillating power rails may trigger in-system programming failures. When migrating between 5M80/160/240/570 density variants, regenerate the Quartus POF file - same pinout but different IDCODE values will confuse older programmers.
تعمیل کی معلومات
RoHS compliant per Intel product page. The 5M80ZT100C4N is the commercial grade; choose 5M80ZT100A5N variant for AEC-Q100 automotive qualification. Halogen-free and lead-free per Intel MAX V family specifications.
