Analog Devices

AD518KH/+ - Single Bipolar Op Amp in TO-99-8 | Analog Devices

MPN: AD518KH/+ ✗ اختتامِ زندگی
6000 uV Vdss TO-99-8 metal can Package
MOQ: 1 |

AD518KH/+ جائزہ

Analog Devices AD518KH/+ is a single-circuit, general-purpose bipolar operational amplifier packaged in an 8-pin TO-99 metal can. The device is identified as an instrumentation, buffer, or general-purpose amplifier with a maximum input offset voltage of 6000 uV according to the product listing data. It belongs to Analog Devices' AD518 family, a low-cost, high-speed operational-amplifier series built for general signal-conditioning applications.

An operational amplifier is an analog integrated circuit that amplifies the difference between its inverting and non-inverting inputs. The AD518KH/+ combines one bipolar amplifier in a conventional metal-can package, making it suitable for legacy instrumentation, signal-conditioning, buffering, and educational designs where that package and pin configuration are already established.

The principal documented features are its single-amplifier architecture, bipolar input stage, eight-pin TO-99 package, and maximum offset voltage of 6000 uV. The AD518 family is also described as a low-cost, high-speed operational-amplifier family. Its heritage package supports through-hole insertion and straightforward prototyping, although modern surface-mount amplifiers are generally preferred for new compact designs.

Within the analog-signal chain hierarchy, the AD518KH/+ sits between passive sensors or source circuits and downstream measurement, conversion, or control blocks. Its task is to increase signal amplitude, preserve the intended waveform, and drive the next circuit stage with the impedance and bandwidth required by that system. Because the device is a single amplifier, systems requiring several gain stages must use additional amplifier devices or multichannel packages.

Typical uses include laboratory instrumentation, low-frequency signal conditioning, transducer interfaces, analog buffering, closed-loop amplifier configurations, and educational or legacy control boards. The TO-99-8 package is particularly useful when maintaining an existing through-hole footprint is more important than minimizing board area or adopting the latest surface-mount technology.

Designers should confirm the manufacturer pin configuration, supply-voltage limits, input common-mode range, output swing, gain-bandwidth behavior, compensation requirements, and thermal limits in the AD518 datasheet before constructing a new circuit. Check that the offset requirement suits the application and verify stability in the intended closed-loop configuration, especially with capacitive loads.

This product record combines lifecycle information, package identification, source pricing, related amplifier references, and practical selection guidance. It is intended to help engineers identify whether the legacy AD518KH/+ package matches an existing design and what must be verified before using it as a new analog-building block.

کے لیے ڈراپ اِن متبادل AD518KH/+ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

AD510LH/+

✅ ڈراپ-اِن
Analog Devices
📦 TO-99-8 metal can
Operational Amplifier · 1 circuit · General-purpose amplifier · 25 uV · Bipolar · TO-99-8 metal can · 8 pins · Through-hole

قیمت کے لیے رابطہ کریں

AD515AKH

✅ ڈراپ-اِن
📦 TO-99-8 metal can
Retains the single general-purpose amplifier in an 8-pin metal-can package with a 0 circuit-count and 0 pin-count difference; detailed electrical deltas require datasheet confirmation

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

AD518KH/+ زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Amplifier Type General-purpose operational amplifier
Number of Circuits 1 circuit
Input Stage Bipolar
Input Offset Voltage, Maximum 6000 uV
پیکیج TO-99-8 metal can
پن کی تعداد 8 pins
ماؤنٹنگ ٹائپ Through-hole
Family Description Low-cost, high-speed integrated operational amplifier
Product Category Instrumentation, operational amplifiers, and buffer amplifiers

AD518KH/+ to-99-8 metal can پن کنفیگریشن گائیڈ

AD518KH/+ (to-99-8 metal can پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

AD518KH/+ کے لیے to-99-8 metal can پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں AD518KH/+.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

AD518KH/+ کے لیے موزوں ہے 6 ایپلیکیشنs: Laboratory Instrumentation Signal Conditioning, Transducer Signal Amplification, Legacy Equipment Repair, Analog Buffering, Educational Analog Electronics, Analog Control Front End.

🔧

Laboratory Instrumentation Signal Conditioning

The AD518KH/+ is suitable for conditioning a sensor or laboratory source before measurement or control, using its single bipolar operational-amplifier stage and documented maximum offset of 6000 uV. Place the device in an inverting, non-inverting, or voltage-follower configuration according to the required gain and impedance. Its TO-99-8 metal-can package makes it especially useful when repairing or replicating legacy through-hole instrumentation. Before finalizing the stage, verify input common-mode range, output swing, bandwidth, slew rate, noise, and stability against the source impedance and required measurement accuracy.

📡

Transducer Signal Amplification

The AD518KH/+ can amplify a low-level transducer signal when its input bias current, offset behavior, common-mode range, and noise meet the transducer requirements. The listed 6000 uV maximum offset provides a concrete limit that must be compared with the acceptable measurement error; it is not automatically sufficient for high-resolution sensing. The single amplifier also requires careful grounding and a defined return path to avoid converting common ground impedance into input error. Review the manufacturer pinout and electrical limits before connecting resistive bridges, thermocouple-style circuits, or other passive sensors.

🔧

Legacy Equipment Repair

The AD518KH/+ is well suited to repairing legacy analog equipment that originally used an Analog Devices AD518-series amplifier in a TO-99-8 package. Its obsolete lifecycle status makes exact footprint, pin-function, and electrical compatibility the central design checks. Compare the original schematic with the manufacturer pin description before installation, and verify offset, gain-bandwidth, slew-rate, common-mode, and supply-voltage requirements against the circuit's operating conditions. Through-hole accessibility supports inspection and rework, but incoming material condition and traceability should be specified because legacy inventory may vary.

⚡

Analog Buffering

The AD518KH/+ can buffer a source whose impedance is too high for the next stage when the selected closed-loop configuration remains stable and the source stays within the input common-mode range. Its single general-purpose bipolar amplifier makes it straightforward to use as a unity-gain follower in legacy designs. Confirm output swing, output-current capability, capacitive-load stability, and bandwidth at the intended operating frequency. Keep the input route short, connect the feedback network close to the device, and use a low-impedance ground reference to prevent the buffer from amplifying board-level disturbance.

🏭

Educational Analog Electronics

The AD518KH/+ provides a practical example of a classic bipolar general-purpose operational amplifier in an inspectable TO-99-8 through-hole package. It can support demonstrations of closed-loop gain, negative feedback, offset nulling, and basic signal conditioning where the selected operating points match the manufacturer's limits. The package is easy to socket and probe compared with many fine-pitch surface-mount amplifiers. For instructional use, compare the data-sheet curves rather than assuming ideal behavior, especially for bandwidth, slew rate, output swing, common-mode range, and noise, which are not fully characterized by the basic product listing.

⚙️

Analog Control Front End

The AD518KH/+ may be used as the input amplification stage of a legacy analog control system when its supply, bandwidth, input range, and output capability match the controller. The documented 6000 uV maximum offset must be small relative to the control signal, while the selected amplifier configuration must preserve loop stability and adequate phase margin. Because this is a single amplifier rather than a dedicated instrumentation-amplifier IC, offset, bias-current, and common-mode errors may accumulate across multiple stages. Prototype the complete signal chain and verify response, saturation, startup, and noise margin before connecting it to power or motion-control hardware.

What is the AD518KH/+?
The AD518KH/+ is a single-circuit, general-purpose bipolar operational amplifier from Analog Devices in an 8-pin TO-99 metal-can package. It is associated with the AD518 family, described as a low-cost, high-speed operational-amplifier family. According to the manufacturer datasheet listing, the device is intended for instrumentation, buffering, and general signal-conditioning roles. Its one amplifier per package makes it suitable for designs that need a discrete gain stage rather than a multichannel amplifier.
What is the maximum input offset voltage of AD518KH/+?
The maximum input offset voltage of the AD518KH/+ is 6000 uV, or 6 mV. This figure describes the maximum difference between the two input voltages required to produce zero output in a properly configured amplifier circuit. The product listing identifies the device as a bipolar general-purpose operational amplifier. Confirm the complete electrical limits and test conditions in the Analog Devices datasheet before using the 6 mV limit as a design tolerance.
What package does the AD518KH/+ use?
The AD518KH/+ uses an 8-pin TO-99 metal-can package. The package is a through-hole style format associated with older precision and instrumentation equipment. Product records identify it as TO-99-8 with eight metal-can pins. Before soldering or substituting it, compare the manufacturer pin diagram with the existing PCB because the exact TO-99 lead arrangement and function assignments must be confirmed rather than inferred from the package outline.
Is AD518KH/+ still active?
The AD518KH/+ is listed as obsolete by the ZDI product record. Obsolete status means that new designs should not assume ongoing lifecycle support or routine availability. Existing equipment can still benefit from repair and substitution work, but engineers should compare the complete electrical specification before fitting the device into a new or safety-critical design. The AD518 family remains represented by related Analog Devices listings, including AD510LH/+ and AD515AKH comparisons.
Where can I download the AD518KH/+ datasheet?
The AD518KH/+ datasheet can be accessed through the linked Analog Devices data-sheet index on the AD518KH document page at Datasheets.com or through the AD518KH data-sheet index at Alldatasheet. The manufacturer datasheet should be the controlling document for pin assignments, supply voltage, input and output ranges, gain-bandwidth product, slew rate, compensation, and environmental ratings. Download and archive the relevant manufacturer revision before beginning layout or circuit modifications.
Where can I find the AD518KH/+ pinout?
The AD518KH/+ pinout must be taken from the pin-description table in the Analog Devices AD518 datasheet. The component is packaged in TO-99-8, but the package pin count alone does not establish each terminal's function or the physical orientation of pin 1. Use the manufacturer diagram to identify the offset-null, supply, non-inverting, inverting, and output connections before probing or soldering the metal-can package.
What can replace the AD518KH/+?
The AD510LH/+ is the closest documented related drop-in candidate because it shares Analog Devices' TO-99-8 package and single general-purpose amplifier architecture. However, the available comparison data does not establish every electrical parameter as identical, so the manufacturer datasheets must be compared for offset voltage, bandwidth, slew rate, common-mode range, output swing, compensation, and pin function. Treat this as a qualified candidate rather than an unconditional substitute.
What is the best Analog Devices equivalent for AD518KH/+?
The best documented Analog Devices equivalent candidate is the AD510LH/+ because it appears in a direct specification comparison with AD518KH and uses the same TO-99-8 single-amplifier package. Exact interchangeability still depends on matching the supply voltage, offset, gain-bandwidth product, slew rate, common-mode range, output drive, compensation method, and pinout. Confirm those parameters in both manufacturer datasheets before authorizing a replacement.
AD518KH/+ vs AD510LH/+ - which is better for instrumentation?
The AD518KH/+ is preferable when the original AD518 family's documented offset limit and speed characteristics are specifically required. The AD510LH/+ may be preferable when its newer or different electrical characteristics better fit the instrumentation bandwidth and precision requirements while preserving the TO-99-8 footprint. The available comparison data identifies both as single general-purpose amplifiers in TO-99-8 packages, but complete parameter selection requires the individual Analog Devices datasheets.
When should I choose AD518KH/+ over another TO-99 amplifier?
Choose the AD518KH/+ when maintaining an existing AD518-based through-hole design is essential and the required amplifier characteristics can be verified from the manufacturer datasheet. Its documented 6000 uV maximum offset and bipolar general-purpose architecture support legacy instrumentation. Select a newer alternative instead when a faster, lower-offset, lower-power, or more available amplifier can be accommodated without changing the PCB or redesigning the surrounding circuit.
Is AD518KH/+ suitable for signal buffering?
The AD518KH/+ is suitable for basic low-frequency signal buffering when its input common-mode range, output swing, bandwidth, and stability characteristics support the intended source and load. The product is classified as a general-purpose operational amplifier and a single bipolar amplifier in TO-99-8. Check the source impedance, capacitive loading, required output amplitude, and closed-loop gain in the manufacturer datasheet before using it with sensors, transducers, or long cable connections.
What are the key specifications of AD518KH/+ that engineers should know?
The key documented specifications are one bipolar amplifier circuit, an 8-pin TO-99 metal-can package, general-purpose instrumentation and buffering applications, and a maximum input offset voltage of 6000 uV. The AD518 family is also described as low-cost and high-speed. Supply voltage, gain-bandwidth product, slew rate, common-mode range, output swing, current capability, and temperature limits must be taken from the manufacturer datasheet before final circuit design.
Can AD518KH/+ be used in a laboratory measurement amplifier?
The AD518KH/+ can participate in a laboratory measurement amplifier because it is a general-purpose single operational amplifier, but it should be treated as one gain stage rather than a complete measurement-amplifier IC. Its bipolar input architecture and documented 6000 uV maximum offset make it relevant to legacy precision and instrumentation circuits. Verify offset drift, input bias current, noise, bandwidth, and common-mode behavior against the measurement accuracy required by the system.
How should I handle decoupling and layout for AD518KH/+?
Place input, output, and supply bypass capacitors close to their corresponding device pins, following the manufacturer application guidance. Keep sensitive input traces short, route output separately from high-impedance input nodes, and provide adequate ground-return paths to minimize parasitic feedback. Because the AD518KH/+ uses a through-hole metal-can package, pay particular attention to lead inductance, socket or socketless construction, and the stability requirements of the selected closed-loop configuration.
Where to buy AD518KH/+ online?
Use the Request a Quote form on this page to request AD518KH/+ availability, current lead time, minimum order quantity, and the exact suffix and package condition required for the BOM. Because the device is obsolete and listings may represent different sourcing channels, specify AD518KH/+ and TO-99-8 explicitly with the request. Confirm date codes, inspection status, and any required delivery or traceability documentation before releasing an order.
What is the price of AD518KH/+?
Use the Request a Quote form on this page for the current AD518KH/+ unit price, quantity breaks, stock position, and lead time. The part is obsolete, so availability and pricing can vary by package condition, sourcing channel, and requested quantity. Do not rely on a generic listing as proof of current inventory. Provide the required quantity and target delivery date with the quote request to obtain a current purchasing response.
What is the lead time for AD518KH/+?
The current lead time for AD518KH/+ should be confirmed through the Request a Quote form on this page. The obsolete lifecycle status means no manufacturer lead time should be assumed, and legacy stock may be limited or allocated. Include the required quantity, inspection level, permitted substitutes, and target delivery date in the request. For maintenance programs, ask whether a matched lot or documented traceability is available.

کے لیے انجینئرنگ ریفرنس ڈیٹا AD518KH/+ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the AD518KH/+ for repair, replication, or legacy instrumentation when the existing circuit specifically depends on the AD518 family's electrical behavior and TO-99-8 footprint. Its documented 6000 uV maximum offset is the clearest available specification for initial screening, but the manufacturer datasheet must still establish supply range, bandwidth, slew rate, common-mode range, output swing, and stability. Consider AD510LH/+ when a related active AD-series part may offer a better match after its detailed parameters are confirmed. Consider AD515AKH when its AD-series characteristics align more closely with the required gain, precision, or speed. Neither related part should be treated as an automatic replacement: verify pin functions and every operating limit before substituting it.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ AD510LH/+ AD515AKH
Package TO-99-8 metal can TO-99-8 metal can TO-99-8 metal can
Brand Analog Devices Analog Devices Analog Devices
Number of Circuits 1 circuit 1 circuit 1 circuit
Amplifier Type General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier
Pin Count 8 pins 8 pins 8 pins
Mounting Style Through-hole Through-hole Through-hole
Family Positioning AD518 low-cost, high-speed operational-amplifier family AD510 family general-purpose operational amplifier AD515 family general-purpose operational amplifier

اہم امتیازی خصوصیات

  • Documented maximum input offset voltage (بمقابلہAD510LH/+)
  • Original AD518 family positioning (بمقابلہAD515AKH)
  • Legacy through-hole implementation (بمقابلہAD510LH/+)

ڈیزائن نوٹس

Do not substitute the AD518KH/+ solely because another amplifier also uses an 8-pin TO-99 package. Confirm the physical lead orientation, pin functions, offset-null connections, supply pins, and input/output assignments against the manufacturer diagrams. Then compare supply voltage, common-mode range, output swing, gain-bandwidth product, slew rate, and compensation requirements. A matching package outline does not by itself guarantee pin-to-pin compatibility or equivalent signal behavior.

Keep the non-inverting input and feedback route physically short, especially when the source impedance is high. Place compensation and bypass components near their associated pins according to the reference configuration, and avoid routing the output beside the input. Maintain a low-impedance ground reference and use a ground plane where practical. For TO-99-8 construction, inspect lead seating and socket contacts because long through-hole connections can add parasitic inductance and introduce unstable feedback behavior.

The documented maximum input offset voltage of 6000 uV is important in precision and control systems, but it does not describe offset drift, input bias current, noise, or common-mode error. Evaluate the complete error budget rather than using the maximum offset as the only accuracy criterion. Also verify that the selected closed-loop gain remains within the amplifier's stable bandwidth and that capacitive loading at the output does not cause ringing or instability.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The part is obsolete and no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified in the available product records.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-14 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

AD518KH/+ datasheet AD518KH/+ pinout AD518KH/+ datasheet pdf AD518KH/+ equivalent AD518KH/+ replacement AD518KH/+ cross reference AD518KH/+ vs AD510LH/+ AD518KH/+ vs AD515AKH AD518KH/+ TO-99-8 pinout AD518KH/+ operational amplifier Analog Devices AD518KH/+ AD518KH/+ application circuit AD518KH/+ price AD518KH/+ stock AD518KH+ obsolete replacement

متعلقہ اجزاء اور اصطلاحات

Analog Devices AD518KH/+ AD518KH AD510LH/+ AD515AKH operational amplifier general-purpose amplifier single-circuit amplifier bipolar input stage instrumentation amplifier buffer amplifier signal conditioning TO-99-8 TO-99 metal can 8-pin metal can package through-hole package QFN family surface mount technology SMD input offset voltage 6000 uV gain-bandwidth product slew rate common-mode voltage range negative feedback
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں