Analog Devices

AD548BQ - Low-Power Precision BiFET Op Amp | Analog Devices

MPN: AD548BQ ✗ اختتامِ زندگی
800 uV maximum Vdss 10 pA maximum, warmed up Id 8-CERDIP, hermetically sealed Package
MOQ: 1 |

AD548BQ جائزہ

The Analog Devices AD548BQ is a single-amplifier, precision BiFET operational amplifier with an 800 uV maximum offset voltage, 1 MHz gain-bandwidth product, 10 pA maximum warmed-up input bias current, and 200 uA maximum quiescent current. The device is supplied in a hermetically sealed 8-CERDIP package for applications requiring a low-noise, low-power analog signal-conditioning stage.

A BiFET operational amplifier is a voltage-input amplifier whose input stage uses field-effect transistors. This amplifier category combines very low input bias current with low supply consumption, making it suitable for precision measurement, buffering, and feedback circuits in which source impedance or sensor leakage could otherwise create measurement error. Within the broader hierarchy, the AD548BQ is an operational amplifier, analog IC, and semiconductor.

The AD548 family uses ion-implanted FET technology and laser wafer trimming. Its principal characteristics include an 800 uV maximum input offset voltage, 1 MHz gain-bandwidth product, 10 pA maximum input bias current after warm-up, and 200 uA maximum quiescent current. The Analog Devices product page identifies AD548B as an industrial-temperature product and describes low drift, low supply current, and strong direct-current and alternating-current performance.

The AD548BQ operates as a general-purpose precision amplifier with one amplifier circuit. Its low bias current reduces errors when driving high source impedances, while its low quiescent current supports compact, low-power instrumentation. The hermetically sealed ceramic package is useful where environmental robustness and long-term operating stability are important, although component availability should be confirmed before starting a new design because Analog Devices marks the AD548 family as not recommended for new designs.

Typical uses include precision buffer stages, low-level sensor interfaces, laboratory instrumentation, photodiode signal conditioning, and feedback networks requiring low input leakage. The 1 MHz bandwidth is suitable for moderate-frequency signal paths rather than high-speed waveform processing. In each case, the input network, output loading, and supply bypass arrangement determine whether the amplifier's offset and noise behavior can be fully utilized.

Designers should begin with the manufacturer datasheet pin-description table, then verify the ceramic package orientation and pin numbering before PCB assembly. Adequate supply bypassing and careful routing of high-impedance input nodes are especially important because parasitic capacitance and leakage can degrade accuracy even when the amplifier itself is operating within specification.

This page consolidates the manufacturer's AD548 family information, identifies the hermetically sealed AD548BQ configuration, documents the limits of current sourcing, and provides comparison and application guidance for engineers who must decide whether this legacy precision amplifier remains suitable for an existing or long-lived instrument.

کے لیے ڈراپ اِن متبادل AD548BQ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں AD548BQ (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Input Bias Current, Package, Quiescent Current.

Analog Devices
Input Bias Current: 10 pA maximum when warmed
Package: 8-pin CERDIP, hermetic sealed
Quiescent Current: 200 µA maximum

AD548AQ

✅ ڈراپ-اِن
📦 8-CERDIP
Same AD548-family precision BiFET architecture and 8-pin ceramic-DIP candidate configuration; grade-specific offset, temperature, and qualification differences require confirmation, with estimated parameter proximity of 90%.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

AD548BR

✅ ڈراپ-اِن
📦 8-CERDIP
Same AD548-family precision BiFET architecture and 8-pin ceramic-DIP candidate configuration; suffix-specific temperature or qualification limits may differ, with estimated parameter proximity of 90%.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

AD548KNZ

✅ ڈراپ-اِن
📦 8-CERDIP
Same AD548-family precision BiFET electrical family with 1 MHz bandwidth and 10 pA warmed-up bias current, but the manufacturer-linked comparison identifies a DIP construction, so exact ceramic-body mechanical equivalence requires verification.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

AD548BQ زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Amplifier Type Single precision operational amplifier
Number of Circuits 1 circuit
Input Offset Voltage 800 uV maximum
Gain-Bandwidth Product 1 MHz
Input Bias Current 10 pA maximum, warmed up
کوئیسینٹ کرنٹ 200 uA maximum
Technology Ion-implanted FET with laser wafer trimming
آپریٹنگ درجہ حرارت رینج -40C to +85C for AD548B
پیکیج 8-CERDIP, hermetically sealed
Package Dimensions 0.300 in / 7.62 mm package width
ماؤنٹنگ ٹائپ Through-hole

AD548BQ پن کنفیگریشن

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
پن 1 NC — Not connected
پن 2 -IN — Inverting input
پن 3 +IN — Noninverting input
پن 4 V- — Negative supply
پن 5 NC — Not connected
پن 6 OUT — Output
پن 7 V+ — Positive supply
پن 8 NC — Not connected

عام استعمالات

AD548BQ کے لیے موزوں ہے 6 ایپلیکیشنs: Precision Sensor Buffering, Low-Power Measurement Instrumentation, Photodiode Signal Conditioning, Laboratory Buffer Stage, Process-Control Signal Conditioning, Legacy Equipment Repair.

🧩

Precision Sensor Buffering

The AD548BQ is appropriate for buffering sensors whose output impedance is high enough that input bias current could otherwise create a measurement error. Its 10 pA maximum warmed-up input bias current helps preserve the sensor's voltage, while the 1 MHz gain-bandwidth product provides useful bandwidth for moderate-rate signals. The 800 uV maximum offset specification must be included in the measurement-uncertainty budget. Because this is an amplifier rather than a dedicated instrumentation amplifier, input bias-current cancellation and drift may still require calibration. Keep sensitive input traces short, shield them from contamination, and verify the complete offset, noise, and drift chain rather than relying on input bias current alone.

🔧

Low-Power Measurement Instrumentation

The AD548BQ suits portable or benchtop measurement equipment in which every milliampere affects battery life, heat, or available supply headroom. Its 200 uA maximum quiescent current is substantially lower than that of many general-purpose precision amplifiers, while the 1 MHz bandwidth supports slowly varying and moderately fast measurement channels. The designer should calculate the amplifier's operating dissipation from the actual supply voltage and load, then confirm that the output swing and input common-mode range cover the complete measurement range. For long acquisition periods, verify offset and drift specifications over the intended temperature interval because low power alone does not guarantee long-term measurement stability.

📷

Photodiode Signal Conditioning

The AD548BQ can form the first amplification stage for a photodiode or other current-producing sensor because its low warmed-up input bias current limits the error introduced at the input node. The 1 MHz gain-bandwidth product is sufficient for many photodiode monitoring, position, and optical-communication interfaces, although higher-bandwidth optical systems may require a faster amplifier. Care must be taken with reverse-bias stability, input capacitance, noise gain, and feedback compensation because these parameters can produce oscillation or reduce phase margin. Use the manufacturer's recommended feedback topology and keep the photodiode connection short, with guarded grounding around the high-impedance input.

🖥️

Laboratory Buffer Stage

In laboratory instrumentation, the AD548BQ can buffer a source before a measurement or conversion stage while preserving high input impedance and drawing little quiescent current. Its 800 uV maximum offset voltage should be considered when the source voltage is small, and its 1 MHz bandwidth should be checked against the required settling time. For precision DC measurements, the input offset voltage, input bias current, drift, and noise must all be included in the uncertainty calculation. Stable layout, clean power bypassing, and low-leakage PCB surfaces are important because a high-impedance amplifier can reveal contamination or condensation that would have little effect on a conventional low-impedance signal path.

🏭

Process-Control Signal Conditioning

The AD548BQ can amplify weak feedback or sensing signals in industrial process-control circuitry when the operating environment remains within the AD548B family's -40C to +85C industrial range. Low quiescent current reduces the heat generated inside compact control equipment, and the 1 MHz bandwidth can handle many slow closed-loop control signals. The hermetically sealed 8-CERDIP construction is of interest for long-lived laboratory or industrial equipment, although the manufacturer identifies the AD548 family as not recommended for new designs. Verify surge, electromagnetic-interference, grounding, and isolation requirements at the system level; the amplifier's operating range alone does not establish compliance for a finished industrial installation.

🔧

Legacy Equipment Repair

AD548BQ is well suited to maintaining a proven laboratory, medical, or industrial instrument that already uses the hermetically sealed 8-CERDIP AD548BQ footprint. Preserving the original architecture avoids the leakage, noise, offset, and qualification changes that can accompany a redesign. The 10 pA maximum warmed-up input bias current and 200 uA maximum quiescent current reproduce the core low-power characteristics expected from the AD548 family. Before fitting a replacement, compare the exact suffix, pinout, ceramic-package dimensions, temperature grade, and electrical characteristics with the failed device. Also inspect the surrounding circuit for damaged insulation, contamination, or capacitor leakage that could imitate an amplifier failure.

تجویز کردہ پروڈکٹس کا خلاصہ

AD548AQ AD548-family precision amplifier candidate استعمال ہوتا ہے: Precision Sensor Buffering, Low-Power Measurement Instrumentation, Photodiode Signal Conditioning, Process-Control Signal Conditioning, Legacy Equipment Repair AD548BR AD548-family precision amplifier candidate استعمال ہوتا ہے: Precision Sensor Buffering, Photodiode Signal Conditioning, Laboratory Buffer Stage, Process-Control Signal Conditioning, Legacy Equipment Repair AD548KNZ AD548-family precision amplifier candidate استعمال ہوتا ہے: Low-Power Measurement Instrumentation, Laboratory Buffer Stage, Legacy Equipment Repair
What is the AD548BQ?
The AD548BQ is a single, low-power precision BiFET operational amplifier from Analog Devices. According to the manufacturer's AD548 product page and data sheet, it combines an 800 uV maximum input offset voltage, a 1 MHz gain-bandwidth product, 10 pA maximum warmed-up input bias current, and a 200 uA maximum quiescent current in a hermetically sealed 8-CERDIP package.
What are the key specifications of AD548BQ that engineers should know?
The AD548BQ combines a 1 MHz gain-bandwidth product with very low input bias current and supply consumption. Manufacturer information identifies a maximum offset voltage of 800 uV, input bias current of 10 pA after warm-up, quiescent current of 200 uA, and ion-implanted FET construction with laser trimming. These characteristics make it most relevant to precision buffers, high-source-impedance sensors, and low-power instrumentation.
Is AD548BQ suitable for precision instrumentation?
Yes, AD548BQ is suitable for precision instrumentation when the circuit operates within its stated supply and common-mode limits. Its 10 pA maximum warmed-up bias current reduces leakage-related error, while the 800 uV maximum offset and 1 MHz bandwidth support accurate signal conditioning. The manufacturer specifically identifies high-performance, low-power applications as a primary use for the AD548 family.
What is the operating temperature range of AD548BQ?
The AD548BQ belongs to the AD548B family, which Analog Devices rates over an industrial temperature range of -40C to +85C. That rating describes the family configuration associated with the B suffix; the complete electrical limits and any grade-dependent distinctions should be checked in the manufacturer data sheet before operating the assembled device outside typical laboratory conditions.
Where can I download the AD548BQ datasheet PDF?
The AD548BQ data sheet is available from Analog Devices through the official AD548 product page and the linked manufacturer PDF. The document provides the authoritative pin description, absolute maximum ratings, electrical characteristics, package drawing, ordering information, and operating details. Use the manufacturer document rather than an unverified mirror when making qualification, assembly, or replacement decisions.
Where can I find the AD548BQ pinout?
The authoritative AD548BQ pinout appears in the pin-description table and package drawing in the Analog Devices AD548 data sheet. The device uses an 8-CERDIP through-hole package. Before layout or replacement work, compare the manufacturer's pin numbers, notch or ceramic-package orientation, signal pins, supply pins, and no-connect positions against the physical board footprint.
Where can I buy AD548BQ online?
Use the Request a Quote form on this page to request AD548BQ availability, current lead time, and a purchase quotation from XAIPART. Because Analog Devices marks the AD548 family as not recommended for new designs, purchasing teams should also verify lifecycle status, package availability, and the quantity required before committing an ongoing production program.
What is the price of AD548BQ?
The current AD548BQ price is not stated as a fixed value on this page because market conditions and component availability can change. Use the Request a Quote form on this page for current pricing, quantity breaks, and availability. Confirm that the quoted item is specifically the hermetically sealed 8-CERDIP AD548BQ configuration rather than another AD548 package or ordering suffix.
What is the lead time for AD548BQ?
Request the current AD548BQ lead time through the Request a Quote form on this page. Lead time depends on remaining manufacturer inventory, package configuration, and order quantity, particularly because the AD548 family is not recommended for new designs. For production planning, ask for a dated confirmation of allocation, packaging, and shipment availability rather than relying on an unconfirmed stock estimate.
Is AD548BQ in stock?
AD548BQ availability must be confirmed through the Request a Quote form on this page because the manufacturer identifies the AD548 family as not recommended for new designs. A listing that shows historical inventory does not guarantee immediately allocable stock at the required quantity. The quotation should confirm the exact MPN, 8-CERDIP package, date of availability, and any manufacturer traceability conditions.
What can replace AD548BQ?
The closest documented options are qualified AD548-family variants, but a replacement is only drop-in after its exact package, pinout, electrical limits, temperature grade, and qualification requirements are checked. Analog Devices lists AD548BQ, AD548AQ, AD548BR, and AD548KNZ within the family-related listings, yet their suffix-specific grades and package constructions must be confirmed from the manufacturer data sheet before substitution.
Is AD548BQ the same as AD548KNZ?
No, AD548BQ and AD548KNZ are not automatically interchangeable even though both are AD548-family precision amplifiers. AD548BQ is identified as an 8-CERDIP hermetically sealed device, while AD548KNZ is identified as a DIP configuration. Verify body width, ceramic construction, pin mapping, temperature grade, and mechanical fit before considering a substitution.
What is the best AD548-family drop-in replacement for AD548BQ?
The best AD548-family replacement must preserve the 8-CERDIP footprint, pin assignment, and electrical behavior of AD548BQ. AD548AQ and AD548BR appear in AD548 family supplier listings, but their exact ceramic-package and grade details require confirmation in the Analog Devices data sheet. Treat either as a candidate rather than an automatic drop-in until those specifications are matched.
What is the best cross-brand equivalent for AD548BQ?
No cross-brand equivalent can be recommended as a confirmed drop-in from the available manufacturer and cross-reference information. A valid substitute must use the same 8-CERDIP footprint, preserve pin-to-pin connections, and provide comparable bias current, offset voltage, bandwidth, supply range, and noise behavior. Use the AD548-family candidates as the starting point for a controlled engineering review.
When should I choose AD548BQ over another low-power precision op amp?
Choose AD548BQ when maintaining an existing hermetically sealed 8-CERDIP instrumentation design is more important than starting a new low-power design. Its 10 pA maximum warmed-up input bias current and 200 uA maximum quiescent current are the decisive benefits for leakage-sensitive and power-constrained circuits. For new designs, evaluate current-generation alternatives through a full electrical, mechanical, and lifecycle review.

کے لیے انجینئرنگ ریفرنس ڈیٹا AD548BQ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose AD548BQ when maintaining an existing 8-CERDIP design where very low input bias current, 200 uA maximum quiescent current, and a 1 MHz gain-bandwidth product are important. It is particularly appropriate for high-impedance sensors, precision buffers, and legacy laboratory instrumentation. Consider AD548AQ or AD548BR only after comparing their verified suffix-specific electrical limits and mechanical details with AD548BQ; their inclusion as alternatives does not eliminate the need for a data-sheet review. AD548KNZ is useful as an electrical-family reference because its published specifications include 1 MHz bandwidth, 10 pA warmed-up bias current, and 200 uA quiescent current, but its DIP construction must be checked for exact mechanical compatibility. For a new design, evaluate current-generation amplifiers because Analog Devices identifies AD548 as not recommended for new designs.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ AD548AQ AD548BR AD548KNZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-CERDIP, hermetically sealed 8-CERDIP candidate; verify exact construction 8-CERDIP candidate; verify exact construction DIP construction; verify ceramic-body compatibility
Amplifier Configuration Single operational amplifier Single AD548-family operational amplifier Single AD548-family operational amplifier Single operational amplifier
Special Features Precision, low-power BiFET operational amplifier AD548-family precision, low-power BiFET amplifier AD548-family precision, low-power BiFET amplifier Low-power precision monolithic operational amplifier

اہم امتیازی خصوصیات

  • Very low input bias current supports leakage-sensitive measurement (بمقابلہAD548KNZ)
  • Low quiescent current supports compact low-power designs (بمقابلہAD548AQ)
  • Hermetically sealed ceramic package supports legacy robust installations (بمقابلہAD548BR)

ڈیزائن نوٹس

Treat the noninverting and inverting inputs as high-impedance nodes. Route them away from switching nodes, power-supply traces, relay contacts, and exposed connector fields. Use a protective guard structure around sensitive input routing where board contamination could create leakage. Keep the feedback components close to pins 2, 3, and 6, and verify the physical orientation of the ceramic package against the manufacturer package drawing before assembly.

Place the supply-bypass capacitor close to pins 7 and 4 and follow the manufacturer layout guidance for the ceramic package. Confirm the actual supply voltage, common-mode range, and output swing before selecting feedback resistors. Because the AD548BQ is specified for low quiescent current, any added bias network can consume as much current as the amplifier and should be included in the complete power-budget calculation.

Check stability with the actual source capacitance, load, and feedback network. The 1 MHz gain-bandwidth product is sufficient for many precision and instrumentation signals, but high noise gain combined with stray capacitance can reduce phase margin. Evaluate gain-bandwidth behavior and settling at the lowest noise gain used in the design, and follow the recommended compensation approach when driving capacitive loads.

Do not assume that every AD548 suffix is mechanically interchangeable with the 8-CERDIP AD548BQ. A functional match requires identical pin assignment, ceramic-body dimensions, temperature grade, electrical limits, and qualification status. For repair work, inspect the board and socket for contamination, damaged insulation, and socket stress before replacing the amplifier; otherwise an apparent amplifier failure may recur.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is identified for AD548BQ in the manufacturer product information. The AD548 family is marked not recommended for new designs by Analog Devices.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-06 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

AD548BQ datasheet AD548BQ pinout AD548BQ datasheet pdf AD548BQ 8-CERDIP AD548BQ specifications AD548BQ equivalent AD548BQ replacement AD548BQ cross reference AD548BQ vs AD548KNZ AD548BQ vs AD548AQ AD548BQ price AD548BQ stock Analog Devices AD548BQ AD548BQ precision BiFET op amp

متعلقہ اجزاء اور اصطلاحات

Analog Devices AD548BQ AD548AQ AD548BR AD548KNZ AD548 BiFET operational amplifier precision operational amplifier analog integrated circuit semiconductor ion-implanted FET laser wafer trimming input bias current quiescent current gain-bandwidth product input offset voltage 8-CERDIP CERDIP package family DIP package family through-hole package precision instrumentation high-impedance sensor interface signal conditioning RoHS REACH
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں