AD548TQ - Low-Power Precision BiFET Op Amp | Analog Devices
MPN: AD548TQ ✗ اختتامِ زندگیAD548TQ جائزہ
A BiFET operational amplifier is a voltage-amplifier IC whose input stage uses field-effect transistors. This input architecture places BiFET amplifiers in the operational-amplifier family and semiconductor hierarchy while providing very low input bias current. The AD548 combines that low-current input stage with a maximum quiescent current of 200 µA and a 1 MHz bandwidth, enabling signal conditioning without the higher power consumption associated with many bipolar precision amplifiers.
The AD548 is manufactured using ion-implanted FET and laser wafer-trimming technologies. Ion implantation supports the low-leakage input characteristics, while laser trimming supports precise offset and bias-current behavior. Its stated maximum input offset voltage is 500 µV, making the amplifier appropriate for sensors and measurement systems in which offset error must remain controlled. The maximum 200 µA quiescent current also supports battery-powered or otherwise power-constrained instrumentation when the required signal bandwidth remains below 1 MHz.
The AD548 family is pin compatible with industry-standard operational amplifiers identified by Analog Devices as LF441, TL061, and AD542. This compatibility can assist design migration and board-level standardization, although engineers should compare input bias current, offset voltage, supply range, bandwidth, noise, and temperature performance before replacing one device with another. The AD548TQ is specifically identified with a military temperature grade and a through-hole hermetically sealed package.
Typical uses include low-level sensor amplification, biomedical instrumentation, precision current-to-voltage conversion, bridge-circuit signal conditioning, and low-power measurement systems. In a current-to-voltage converter, the amplifier can provide high input impedance to avoid loading the sensor while its low 10 pA maximum warmed-up bias current limits the error introduced by high source impedances. Its 1 MHz bandwidth is sufficient for many sensor and audio-frequency signal paths, though it is not intended for high-speed closed-loop applications.
Designers should preserve the device's input and output operating conditions, account for bias-current drift before warm-up, and use clean grounding and short feedback paths. Because the AD548TQ uses an 8-pin ceramic DIP outline, existing boards designed around that package can be evaluated directly for reuse. This page combines the manufacturer’s product information, verified distributor records, package details, compatibility guidance, and practical selection notes to support sourcing and engineering decisions.
کے لیے ڈراپ اِن متبادل AD548TQ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں AD548TQ (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Mounting Type.
AD548TQ/883B
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
AD548TQ/883
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
AD5422ACPZ
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC18LF4410-I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →TL061
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
AD548TQ زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | Precision low-power BiFET operational amplifier |
| Number of Circuits | 1 circuit |
| Maximum Input Offset Voltage | 500 µV |
| Gain-Bandwidth Product | 1 MHz |
| Maximum Input Bias Current | 10 pA when warmed up |
| Maximum Quiescent Current | 200 µA |
| Input Transistor Technology | Ion-implanted FET |
| Offset Adjustment Technology | Laser wafer trimming |
| پیکیج | 8-pin hermetically sealed CERDIP (CDIP-8) |
| ماؤنٹنگ ٹائپ | Through-hole |
| Number of Terminals | 8 terminals |
| Temperature Grade | Military |
| Lifecycle Recommendation | Not recommended for new designs |
| Industry-Standard Pin Compatibility | Compatible with LF441, TL061, and AD542 op amps |
AD548TQ پن کنفیگریشن
| پن 1 | OFFSET NULL — Offset null connection |
| پن 2 | INVERTING INPUT — Inverting input terminal |
| پن 3 | NON-INVERTING INPUT — Non-inverting input terminal |
| پن 4 | V- — Negative power supply terminal |
| پن 5 | OFFSET NULL — Offset null connection |
| پن 6 | OUTPUT — Amplifier output terminal |
| پن 7 | V+ — Positive power supply terminal |
| پن 8 | NC — Not connected |
عام استعمالات
AD548TQ کے لیے موزوں ہے 6 ایپلیکیشنs: High-Impedance Sensor Signal Conditioning, Precision Current-to-Voltage Conversion, Bridge and Strain-Gauge Measurement, Low-Power Medical Instrumentation, Precision Audio and Control Amplification, Industrial Process-Control Amplifier.
High-Impedance Sensor Signal Conditioning
The AD548TQ fits high-impedance sensor front ends because its input bias current is specified at 10 pA maximum when warmed up, reducing the bias-current error produced across a large source impedance. Its 500 µV maximum input offset voltage must be included in the signal-chain error budget, while the 1 MHz bandwidth supports sensors whose useful signals remain below that frequency. The amplifier can provide high input impedance and straightforward differential gain around the non-inverting and inverting inputs. Designers should calculate sensor leakage, input bias drift, warm-up time, and source-impedance errors together rather than relying only on nominal room-temperature offset performance.
تجویز کردہ
Precision Current-to-Voltage Conversion
The AD548TQ is appropriate for transimpedance measurements where a sensor current must be converted into a voltage for an ADC or measurement system. Its 10 pA maximum warmed-up input bias current limits the feedback-resistor error that can otherwise dominate when a very large resistance is used, and its low 200 µA maximum quiescent current suits compact, power-sensitive instrumentation. The 500 µV maximum input offset voltage contributes directly to the converted-signal error, so it should be considered alongside resistor tolerance and switch leakage. A practical design uses a guarded feedback layout, a return-path input connection, and a bandwidth calculation matched to the sensor and ADC sampling rate.
تجویز کردہ
Bridge and Strain-Gauge Measurement
The AD548TQ can amplify the small differential voltage generated by resistive bridges and strain gauges while limiting input-current-induced errors. Its 10 pA maximum warmed-up bias current is useful when bridge source impedances are high, and the 1 MHz gain-bandwidth product provides more bandwidth than many precision low-power measurement designs require. The amplifier’s 500 µV maximum offset voltage must be included in bridge error calculations, particularly for low-range sensors. Keep the input and feedback routing compact, connect the return side to the appropriate bridge reference, and evaluate offset drift and noise over the intended temperature range before using the circuit for calibration-sensitive measurements.
تجویز کردہ
Low-Power Medical Instrumentation
The AD548TQ fits low-power medical and laboratory instrumentation when a circuit must combine low input bias current with limited standing current. The 10 pA maximum warmed-up bias current helps preserve signals from high-impedance bioelectrodes or sensors, while the 200 µA maximum quiescent current supports longer operation in compact battery-powered equipment. Its 1 MHz bandwidth is suitable for many physiological and laboratory signal bands but not demanding high-speed diagnostic front ends. The military temperature grade and hermetically sealed ceramic package can suit demanding equipment, although medical-system qualification, isolation, leakage, and safety requirements remain system-level responsibilities.
تجویز کردہ
Precision Audio and Control Amplification
The AD548TQ can serve in precision audio-control and feedback paths where low-level signals require high input impedance and modest bandwidth. Its 1 MHz gain-bandwidth product is adequate for many audio-frequency control signals, while the 10 pA maximum warmed-up input bias current avoids loading sensitive sources. The 500 µV maximum offset voltage is acceptable in many feedback and instrumentation paths but should be modeled when processing very small signals. Designers should compare noise, slew rate, output swing, and supply range against the exact application because those parameters determine how cleanly the amplifier can drive downstream audio and control circuitry.
تجویز کردہ
Industrial Process-Control Amplifier
The AD548TQ is useful in process-control modules that condition outputs from resistive or current-output sensors under low-power conditions. The amplifier’s 10 pA maximum warmed-up input bias current reduces errors from long, high-impedance sensor connections, while its 500 µV maximum offset voltage must be calibrated or included in the measurement uncertainty. The 1 MHz bandwidth supports faster control-loop signal paths than a strictly low-frequency precision amplifier may provide. Its hermetically sealed 8-pin CERDIP package and military temperature designation suit rugged equipment, but designers should still verify supply limits, thermal performance, grounding, and protection against industrial transients.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا AD548TQ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | AD548TQ/883B | AD548TQ/883 | AD542 | LF441 | TL061 |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments | Texas Instruments |
| Package | 8-pin hermetically sealed CERDIP (CDIP-8) | 8-pin hermetically sealed CERDIP (CDIP-8) | 8-pin hermetically sealed CERDIP (CDIP-8) | 8-pin hermetically sealed CERDIP (CDIP-8) | 8-pin hermetically sealed CERDIP (CDIP-8) | 8-pin hermetically sealed CERDIP (CDIP-8) |
| Pin Compatibility | Compatible with LF441, TL061, and AD542 | AD548 family package | AD548 family package | Identified as pin compatible with AD548 | Identified as pin compatible with AD548 | Identified as pin compatible with AD548 |
اہم امتیازی خصوصیات
- Combines very low input bias current with low quiescent current (بمقابلہTL061)
- Provides a documented precision 1 MHz bandwidth (بمقابلہAD542)
- Uses low-power BiFET input technology (بمقابلہLF441)
- Available in a hermetically sealed military-temperature package (بمقابلہAD548TQ/883B)
ڈیزائن نوٹس
The AD548’s 10 pA maximum warmed-up bias current makes input routing and leakage control important. Keep the non-inverting input and feedback node clean, avoid nearby high-impedance leakage paths, and account for board-surface contamination when the source impedance is high. Because the specification includes warmed-up behavior, allow sufficient settling time before precision measurements and do not substitute a room-temperature or cold-device bias figure for the design limit.
Pin compatibility does not guarantee electrical equivalence. Before replacing AD548TQ with AD542, LF441, or TL061, compare supply voltage, input common-mode range, output swing, offset voltage, bias current, noise, bandwidth, slew rate, stability, and temperature performance. Also verify the exact ceramic package variant because a generic 8-pin DIP ordering code may not represent the same sealing, temperature grade, screening, or pin configuration required by the original design.
Use a short, direct layout around the operational amplifier, with the non-inverting and inverting inputs protected from switching-node and digital-clock traces. Place offset-adjustment components, if required, according to the manufacturer diagram and keep their connections away from high-impedance input nodes. The ceramic DIP package should be oriented according to the manufacturer package drawing, and adequate spacing should be maintained between adjacent leads to avoid solder bridging during rework.
The AD548TQ is specified for a maximum quiescent current of 200 µA, but total system demand also includes output-current load, bias-current paths, and external circuitry. Confirm the actual supply current under the worst operating state and provide local supply decoupling according to the manufacturer guidance. Because the part is normally used in dual-supply or single-supply arrangements, verify both supply rails, grounding, and any input or output excursions against the datasheet limits.
تعمیل کی معلومات
The AD548TQ is identified as a military-grade operational amplifier in a hermetically sealed ceramic DIP package. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not present in the cited product information; AEC-Q100 is not applicable to this operational amplifier.