Analog Devices

AD548TQ - Low-Power Precision BiFET Op Amp | Analog Devices

N.º de pieza: AD548TQ ✗ Fin de vida
500 µV Vdss 10 pA when warmed up Id 8-pin hermetically sealed CERDIP (CDIP-8) Package
MOQ: 1 |

AD548TQ Descripción general

The Analog Devices AD548TQ is a low-power, precision BiFET operational amplifier with a maximum offset voltage of 500 µV, a 1 MHz gain-bandwidth product, and low bias current of 10 pA maximum when warmed up. The device is offered in an 8-pin hermetically sealed CERDIP package designated by the TQ ordering code. Its precision, low-power characteristics make it suitable for instrumentation, sensor-signal conditioning, and other applications requiring low input bias current.

A BiFET operational amplifier is a voltage-amplifier IC whose input stage uses field-effect transistors. This input architecture places BiFET amplifiers in the operational-amplifier family and semiconductor hierarchy while providing very low input bias current. The AD548 combines that low-current input stage with a maximum quiescent current of 200 µA and a 1 MHz bandwidth, enabling signal conditioning without the higher power consumption associated with many bipolar precision amplifiers.

The AD548 is manufactured using ion-implanted FET and laser wafer-trimming technologies. Ion implantation supports the low-leakage input characteristics, while laser trimming supports precise offset and bias-current behavior. Its stated maximum input offset voltage is 500 µV, making the amplifier appropriate for sensors and measurement systems in which offset error must remain controlled. The maximum 200 µA quiescent current also supports battery-powered or otherwise power-constrained instrumentation when the required signal bandwidth remains below 1 MHz.

The AD548 family is pin compatible with industry-standard operational amplifiers identified by Analog Devices as LF441, TL061, and AD542. This compatibility can assist design migration and board-level standardization, although engineers should compare input bias current, offset voltage, supply range, bandwidth, noise, and temperature performance before replacing one device with another. The AD548TQ is specifically identified with a military temperature grade and a through-hole hermetically sealed package.

Typical uses include low-level sensor amplification, biomedical instrumentation, precision current-to-voltage conversion, bridge-circuit signal conditioning, and low-power measurement systems. In a current-to-voltage converter, the amplifier can provide high input impedance to avoid loading the sensor while its low 10 pA maximum warmed-up bias current limits the error introduced by high source impedances. Its 1 MHz bandwidth is sufficient for many sensor and audio-frequency signal paths, though it is not intended for high-speed closed-loop applications.

Designers should preserve the device's input and output operating conditions, account for bias-current drift before warm-up, and use clean grounding and short feedback paths. Because the AD548TQ uses an 8-pin ceramic DIP outline, existing boards designed around that package can be evaluated directly for reuse. This page combines the manufacturer’s product information, verified distributor records, package details, compatibility guidance, and practical selection notes to support sourcing and engineering decisions.

Alternativas directas para AD548TQ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con AD548TQ (mismo factor de forma y huella) — difiere en Package, Mounting Type.

Analog Devices
Package: 40-Lead LFCSP-VQ (6x6 mm)
Mounting Type: Surface Mount
Comparar con AD548TQ →
Microchip Technology
Package: 44-pin TQFP (PT), 10x10 mm
Mounting Type: Surface Mount

AD548TQ/883B

✅ Sustitución directa
📦 8-pin hermetically sealed CERDIP (CDIP-8)
Same AD548 electrical family and CDIP-8 outline; slash-suffix screening designation differs by up to 100% of the documented ordering difference

📋 Alternativa de referencia (no en el catálogo)

AD548TQ/883

✅ Sustitución directa
📦 8-pin hermetically sealed CERDIP (CDIP-8)
Same AD548 electrical family and CDIP-8 outline; slash-suffix screening designation differs by up to 100% of the documented ordering difference

📋 Alternativa de referencia (no en el catálogo)

AD5422ACPZ

✅ Sustitución directa
Analog Devices
📦 8-pin hermetically sealed CERDIP (CDIP-8)
16 bit · 1 · Current and Voltage · 4 mA to 20 mA, 0 mA to 20 mA, 0 mA to 24 mA · 0 V to 5 V, 0 V to 10 V, ±5 V, ±10 V · 10 µs · ±0.1% FSR · 10.8 V to 40 V

Consulte el precio

Ver hoja de datos →

PIC18LF4410-I/PT

✅ Sustitución directa
Microchip Technology
📦 8-pin hermetically sealed CERDIP (CDIP-8)
8-bit PIC18 RISC, 16-bit instruction word · 16 KB (8K x 16 instructions) · 768 bytes · 256 bytes · 40 MHz (10 MIPS) · 2.0 V to 5.5 V (LF low-voltage core) · 36 · 10-bit, 13 channels, up to 100 ksps

Consulte el precio

Ver hoja de datos →

TL061

✅ Sustitución directa
📦 8-pin hermetically sealed CERDIP (CDIP-8)
Manufacturer identifies pin compatibility; key performance variation is not quantified in the available records

📋 Alternativa de referencia (no en el catálogo)

AD548TQ Valores máximos y características eléctricas

Product Type Precision low-power BiFET operational amplifier
Number of Circuits 1 circuit
Maximum Input Offset Voltage 500 µV
Gain-Bandwidth Product 1 MHz
Maximum Input Bias Current 10 pA when warmed up
Maximum Quiescent Current 200 µA
Input Transistor Technology Ion-implanted FET
Offset Adjustment Technology Laser wafer trimming
Encapsulado 8-pin hermetically sealed CERDIP (CDIP-8)
Tipo de montaje Through-hole
Number of Terminals 8 terminals
Temperature Grade Military
Lifecycle Recommendation Not recommended for new designs
Industry-Standard Pin Compatibility Compatible with LF441, TL061, and AD542 op amps

Configuración de pines de AD548TQ

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
Pin 1 OFFSET NULL — Offset null connection
Pin 2 INVERTING INPUT — Inverting input terminal
Pin 3 NON-INVERTING INPUT — Non-inverting input terminal
Pin 4 V- — Negative power supply terminal
Pin 5 OFFSET NULL — Offset null connection
Pin 6 OUTPUT — Amplifier output terminal
Pin 7 V+ — Positive power supply terminal
Pin 8 NC — Not connected

Aplicaciones típicas

AD548TQ es adecuado para 6 aplicacións: High-Impedance Sensor Signal Conditioning, Precision Current-to-Voltage Conversion, Bridge and Strain-Gauge Measurement, Low-Power Medical Instrumentation, Precision Audio and Control Amplification, Industrial Process-Control Amplifier.

🧩

High-Impedance Sensor Signal Conditioning

The AD548TQ fits high-impedance sensor front ends because its input bias current is specified at 10 pA maximum when warmed up, reducing the bias-current error produced across a large source impedance. Its 500 µV maximum input offset voltage must be included in the signal-chain error budget, while the 1 MHz bandwidth supports sensors whose useful signals remain below that frequency. The amplifier can provide high input impedance and straightforward differential gain around the non-inverting and inverting inputs. Designers should calculate sensor leakage, input bias drift, warm-up time, and source-impedance errors together rather than relying only on nominal room-temperature offset performance.

📱

Precision Current-to-Voltage Conversion

The AD548TQ is appropriate for transimpedance measurements where a sensor current must be converted into a voltage for an ADC or measurement system. Its 10 pA maximum warmed-up input bias current limits the feedback-resistor error that can otherwise dominate when a very large resistance is used, and its low 200 µA maximum quiescent current suits compact, power-sensitive instrumentation. The 500 µV maximum input offset voltage contributes directly to the converted-signal error, so it should be considered alongside resistor tolerance and switch leakage. A practical design uses a guarded feedback layout, a return-path input connection, and a bandwidth calculation matched to the sensor and ADC sampling rate.

🏭

Bridge and Strain-Gauge Measurement

The AD548TQ can amplify the small differential voltage generated by resistive bridges and strain gauges while limiting input-current-induced errors. Its 10 pA maximum warmed-up bias current is useful when bridge source impedances are high, and the 1 MHz gain-bandwidth product provides more bandwidth than many precision low-power measurement designs require. The amplifier’s 500 µV maximum offset voltage must be included in bridge error calculations, particularly for low-range sensors. Keep the input and feedback routing compact, connect the return side to the appropriate bridge reference, and evaluate offset drift and noise over the intended temperature range before using the circuit for calibration-sensitive measurements.

💊

Low-Power Medical Instrumentation

The AD548TQ fits low-power medical and laboratory instrumentation when a circuit must combine low input bias current with limited standing current. The 10 pA maximum warmed-up bias current helps preserve signals from high-impedance bioelectrodes or sensors, while the 200 µA maximum quiescent current supports longer operation in compact battery-powered equipment. Its 1 MHz bandwidth is suitable for many physiological and laboratory signal bands but not demanding high-speed diagnostic front ends. The military temperature grade and hermetically sealed ceramic package can suit demanding equipment, although medical-system qualification, isolation, leakage, and safety requirements remain system-level responsibilities.

🎧

Precision Audio and Control Amplification

The AD548TQ can serve in precision audio-control and feedback paths where low-level signals require high input impedance and modest bandwidth. Its 1 MHz gain-bandwidth product is adequate for many audio-frequency control signals, while the 10 pA maximum warmed-up input bias current avoids loading sensitive sources. The 500 µV maximum offset voltage is acceptable in many feedback and instrumentation paths but should be modeled when processing very small signals. Designers should compare noise, slew rate, output swing, and supply range against the exact application because those parameters determine how cleanly the amplifier can drive downstream audio and control circuitry.

⚡

Industrial Process-Control Amplifier

The AD548TQ is useful in process-control modules that condition outputs from resistive or current-output sensors under low-power conditions. The amplifier’s 10 pA maximum warmed-up input bias current reduces errors from long, high-impedance sensor connections, while its 500 µV maximum offset voltage must be calibrated or included in the measurement uncertainty. The 1 MHz bandwidth supports faster control-loop signal paths than a strictly low-frequency precision amplifier may provide. Its hermetically sealed 8-pin CERDIP package and military temperature designation suit rugged equipment, but designers should still verify supply limits, thermal performance, grounding, and protection against industrial transients.

Resumen de productos recomendados

AD548TQ Analog Devices Se usa en: High-Impedance Sensor Signal Conditioning, Precision Current-to-Voltage Conversion, Bridge and Strain-Gauge Measurement, Low-Power Medical Instrumentation, Precision Audio and Control Amplification, Industrial Process-Control Amplifier AD542 Pin-compatible ADI operational-amplifier family member Se usa en: High-Impedance Sensor Signal Conditioning, Bridge and Strain-Gauge Measurement, Industrial Process-Control Amplifier LF441 Pin-compatible low-power amplifier family reference Se usa en: Precision Current-to-Voltage Conversion, Precision Audio and Control Amplification TL061 Pin-compatible low-cost amplifier reference Se usa en: Low-Power Medical Instrumentation
Where can I buy AD548TQ online?
Use the Request a Quote form on this page to request AD548TQ availability, current lead time, and a quotation. The exact device is listed in distributor records as an 8-pin CERDIP operational amplifier, while the manufacturer identifies the AD548 family as not recommended for new designs. For a new production design, review whether a currently supported amplifier satisfies the required electrical and package specifications before placing an order.
What is the price of AD548TQ?
The current price of AD548TQ should be requested through the Request a Quote form on this page. The manufacturer’s product page describes the AD548 family as not recommended for new designs, which may affect lifecycle availability and procurement planning. Quote requests should specify the required quantity, ceramic DIP package, and inspection requirements so that availability and lead time can be matched to the production schedule.
What is the lead time for AD548TQ?
Request the current AD548TQ lead time and minimum order quantity through the Request a Quote form on this page. Because the manufacturer identifies the AD548 family as not recommended for new designs, procurement should not rely on the distributor listing alone as a scheduling guarantee. Include the forecast quantity and required delivery date when requesting a quotation for this military-grade, 8-pin CERDIP device.
Is AD548TQ in stock?
AD548TQ availability can be requested through the Request a Quote form on this page rather than inferred from a distributor page. Verified distributor records identify the exact MPN and its 8-pin CERDIP package, but inventory can change rapidly for a not-recommended-for-new-designs product. For production planning, request quantity-specific availability, traceability information, and a committed delivery schedule.
What are the key specifications of AD548TQ that engineers should know?
The AD548TQ is a single-circuit, low-power precision BiFET operational amplifier with a maximum input offset voltage of 500 µV, 1 MHz gain-bandwidth product, 10 pA maximum warmed-up input bias current, and 200 µA maximum quiescent current. According to the Analog Devices AD548 datasheet, it is built with ion-implanted FET and laser wafer-trimming technologies and is available in an 8-pin hermetically sealed CERDIP package for military-temperature applications.
What is the AD548TQ pinout?
The AD548TQ uses an 8-pin operational-amplifier pinout: pin 1 is offset null, pin 2 is inverting input, pin 3 is non-inverting input, pin 4 is negative supply, pin 5 is offset null, pin 6 is output, pin 7 is positive supply, and pin 8 is not connected. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks and checking the ceramic DIP orientation before assembly.
Where can I download the AD548TQ datasheet PDF?
The official AD548TQ product documentation is available from Analog Devices through the AD548 product page at https://www.analog.com/en/products/ad548.html. The page links the manufacturer’s precision, low-power BiFET operational-amplifier data sheet, identified as Revision D, together with product-selection and ordering information. Consult that document for the complete electrical characteristics, package drawing, pin descriptions, and qualification details before finalizing a circuit.
Is AD548TQ the same as AD548TQ/883B?
The AD548TQ and AD548TQ/883B both identify variants of the AD548 family in an 8-pin hermetically sealed ceramic DIP package, but the slash suffix is associated with a separate ordering and screening designation. The verified records do not provide a complete side-by-side screening matrix, so use the manufacturer ordering guide to confirm temperature grade, screening, test marking, and documentation before treating either orderable variant as interchangeable.
Can LF441 replace AD548TQ?
The AD548 is identified by Analog Devices as pin compatible with the LF441, but replacement requires a complete electrical review rather than a footprint-only decision. The AD548 is specified for a 500 µV maximum offset voltage, 10 pA maximum warmed-up bias current, 200 µA maximum quiescent current, and 1 MHz bandwidth. Confirm supply voltage, offset null implementation, temperature grade, package sealing, noise, and stability for the exact LF441 variant before substitution.
Can TL061 replace AD548TQ?
TL061 is one of the industry-standard operational amplifiers identified as pin compatible with the AD548, but it is not automatically electrically equivalent to AD548TQ. Compare the exact TL061 variant against the AD548’s 500 µV maximum offset voltage, 10 pA maximum warmed-up input bias current, 200 µA maximum quiescent current, and 1 MHz bandwidth. Supply range, input bias behavior, noise, and military-temperature requirements may affect the replacement decision.
What is the best ADI equivalent for AD548TQ?
AD542 is the Analog Devices amplifier explicitly identified by the manufacturer as pin compatible with the AD548. It is therefore the closest same-brand candidate to evaluate for an AD548TQ replacement. However, the manufacturer’s compatibility statement does not by itself establish identical offset, bias-current, bandwidth, noise, supply, or temperature performance, so verify those parameters against the specific AD542 package and ordering variant in the datasheet.
What is the best drop-in replacement for AD548TQ?
AD548TQ/883B is the closest same-family drop-in candidate identified in the records because it retains the AD548 identity and hermetically sealed 8-pin ceramic DIP format. Its slash suffix may represent different screening or ordering requirements, so confirm those details before replacement. LF441, TL061, and AD542 are also identified as pin compatible, but each requires individual electrical and qualification checks rather than unconditional substitution.
When should I choose AD548TQ instead of AD548TQ/883B?
Choose AD548TQ when the required AD548 electrical performance, military temperature grade, and standard 8-pin hermetically sealed ceramic DIP ordering are sufficient for the design. Choose AD548TQ/883B only when its additional slash-suffix screening or documentation requirements are needed. Because the manufacturer marks the AD548 family as not recommended for new designs, either choice should be justified against current lifecycle availability and project requirements.
Is AD548TQ suitable for low-power sensor amplification?
The AD548TQ is well suited to low-level sensor amplification because its input bias current is specified at 10 pA maximum when warmed up and its quiescent current is limited to 200 µA maximum. Those characteristics reduce errors with high-impedance sensors and support power-constrained measurement systems. The 1 MHz bandwidth supports moderate-bandwidth conditioning, while the 500 µV maximum offset voltage must be included in the overall measurement-error budget.
What are the common design pitfalls when using AD548TQ?
The main AD548TQ design pitfalls are substituting a pin-compatible amplifier without checking electrical specifications, neglecting warm-up behavior in bias-current calculations, and using the wrong package variant for a ceramic military design. Keep feedback loops short, observe the manufacturer’s supply and common-mode limits, and account for offset voltage at the operating temperature. For offset-null applications, follow the exact connection shown in the manufacturer datasheet.

Datos de referencia de ingeniería para AD548TQ — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose AD548TQ when the design specifically needs a precision, low-power BiFET operational amplifier with 10 pA maximum warmed-up input bias current, 200 µA maximum quiescent current, and a 1 MHz gain-bandwidth product in an 8-pin hermetically sealed ceramic DIP package. AD548TQ/883B is the closest same-family option to evaluate when an additional slash-suffix screening or documentation designation is required. AD542 is the most direct same-brand pin-compatible alternative identified by the manufacturer, but its offset, bias, noise, bandwidth, and temperature parameters must be verified. LF441 and TL061 are also identified as pin-compatible industry-standard amplifiers; use them only after confirming electrical equivalence and the exact package qualification. Because Analog Devices marks the AD548 family as not recommended for new designs, use AD548TQ primarily for maintenance, replication, or previously qualified programs and request current availability before committing to a new production release.

Comparación con alternativas

Parámetro Este producto AD548TQ/883B AD548TQ/883 AD542 LF441 TL061
Brand Analog Devices Analog Devices Analog Devices Analog Devices Texas Instruments Texas Instruments
Package 8-pin hermetically sealed CERDIP (CDIP-8) 8-pin hermetically sealed CERDIP (CDIP-8) 8-pin hermetically sealed CERDIP (CDIP-8) 8-pin hermetically sealed CERDIP (CDIP-8) 8-pin hermetically sealed CERDIP (CDIP-8) 8-pin hermetically sealed CERDIP (CDIP-8)
Pin Compatibility Compatible with LF441, TL061, and AD542 AD548 family package AD548 family package Identified as pin compatible with AD548 Identified as pin compatible with AD548 Identified as pin compatible with AD548

Diferenciadores clave

  • Combines very low input bias current with low quiescent current (frente a TL061)
  • Provides a documented precision 1 MHz bandwidth (frente a AD542)
  • Uses low-power BiFET input technology (frente a LF441)
  • Available in a hermetically sealed military-temperature package (frente a AD548TQ/883B)

Notas de diseño

The AD548’s 10 pA maximum warmed-up bias current makes input routing and leakage control important. Keep the non-inverting input and feedback node clean, avoid nearby high-impedance leakage paths, and account for board-surface contamination when the source impedance is high. Because the specification includes warmed-up behavior, allow sufficient settling time before precision measurements and do not substitute a room-temperature or cold-device bias figure for the design limit.

Pin compatibility does not guarantee electrical equivalence. Before replacing AD548TQ with AD542, LF441, or TL061, compare supply voltage, input common-mode range, output swing, offset voltage, bias current, noise, bandwidth, slew rate, stability, and temperature performance. Also verify the exact ceramic package variant because a generic 8-pin DIP ordering code may not represent the same sealing, temperature grade, screening, or pin configuration required by the original design.

Use a short, direct layout around the operational amplifier, with the non-inverting and inverting inputs protected from switching-node and digital-clock traces. Place offset-adjustment components, if required, according to the manufacturer diagram and keep their connections away from high-impedance input nodes. The ceramic DIP package should be oriented according to the manufacturer package drawing, and adequate spacing should be maintained between adjacent leads to avoid solder bridging during rework.

The AD548TQ is specified for a maximum quiescent current of 200 µA, but total system demand also includes output-current load, bias-current paths, and external circuitry. Confirm the actual supply current under the worst operating state and provide local supply decoupling according to the manufacturer guidance. Because the part is normally used in dual-supply or single-supply arrangements, verify both supply rails, grounding, and any input or output excursions against the datasheet limits.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The AD548TQ is identified as a military-grade operational amplifier in a hermetically sealed ceramic DIP package. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not present in the cited product information; AEC-Q100 is not applicable to this operational amplifier.

Datos verificados el: 2026-11-18 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

AD548TQ datasheet AD548TQ pinout AD548TQ datasheet pdf AD548TQ equivalent AD548TQ replacement AD548TQ drop-in replacement AD548TQ vs AD542 AD548TQ vs LF441 AD548TQ CDIP-8 pinout AD548TQ application circuit AD548TQ price AD548TQ stock Analog Devices AD548TQ AD548TQ military amplifier AD548TQ 500 uV 1 MHz amplifier

Componentes & términos relacionados

Analog Devices AD548TQ AD548TQ/883B AD548TQ/883 AD542 LF441 TL061 BiFET operational amplifier low-dropout-free precision amplifier operational amplifier analog amplifier IC semiconductor input bias current quiescent current gain-bandwidth product input offset voltage ion-implanted FET laser wafer trimming CERDIP-8 hermetically sealed ceramic DIP through-hole package military temperature grade sensor signal conditioning transimpedance amplifier precision instrumentation
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ