Analog Devices

AD8001ANZ - 800 MHz Current Feedback Amplifier | Analog Devices

MPN: AD8001ANZ ✓ فعال
Up to +/-6 V Vdss 6 uA Id 8-pin PDIP, 0.300 inch wide Package
MOQ: 1 |

AD8001ANZ جائزہ

The Analog Devices AD8001ANZ is a single current-feedback amplifier optimized for high-speed video and general-purpose analog signal-chain applications. Its headline specifications are 800 MHz bandwidth, 1200 V/us slew rate, and operation from dual supplies up to +/-6 V or single supplies from 6 V to 12 V, all in an 8-pin PDIP package. The AD8001 uses unique transimpedance linearization circuitry to deliver excellent differential gain and phase performance while consuming only 50 mW of power. It is designed around a current-feedback architecture rather than a conventional voltage-feedback topology, making it useful where wide bandwidth, low distortion, and controlled differential behavior are more important than unity-gain stability.

An operational amplifier is an active analog component that uses high open-loop gain and negative feedback to amplify small input signals with predictable closed-loop behavior. The AD8001 belongs to the current-feedback amplifier, high-speed amplifier, analog IC, and signal-conditioning IC hierarchy. Current-feedback amplifiers are frequently selected for video, instrumentation, communications, and pulse-processing circuits because their bandwidth can remain high as closed-loop gain is reduced, provided the feedback network is implemented with the correct impedance.

Key electrical features include 0.1 dB gain flatness to 100 MHz, low 50 mW power consumption, and a typical operating current listed by distributor data as approximately 70 mA. The device supports the industrial temperature range from -40 C to +85 C and is available in a PDIP-8 package. An evaluation board, AD8001-EB, is available from Analog Devices for evaluating the amplifier and reviewing its recommended schematic and layout.

The AD8001 is intended for applications requiring high-speed signal amplification rather than precision dc amplification. Its current-feedback architecture and transimpedance linearization circuitry can provide low differential gain and phase error in video chains, while its low power consumption suits portable and space-constrained equipment. Supply voltage selection is important because the amplifier is designed for low-voltage operation rather than the higher rails used by many general-purpose amplifiers.

Typical uses include video routing and distribution, high-speed instrumentation, communications interfaces, active filtering, and pulse-signal conditioning. The small PDIP-8 package is convenient for prototyping and through-hole laboratory boards, but a surface-mount option should be considered for compact production equipment when thermal performance and assembly density are priorities.

When laying out the circuit, keep the feedback resistor and inverting input connection short, use a low-inductivity ground return, and place decoupling capacitors close to the supply pins. Current-feedback amplifiers require careful feedback-impedance selection; use the application information in the manufacturer datasheet to determine the appropriate value and confirm stability and distortion in the intended gain configuration.

کے لیے ڈراپ اِن متبادل AD8001ANZ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں AD8001ANZ (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package.

Analog Devices
Package: 14-pin PDIP
موازنہ کریں AD8001ANZ →

AD8001AN

✅ ڈراپ-اِن
📦 PDIP-8
Same AD8001 series and PDIP-8 family; AD8001AN is the non-Z industrial-temperature ordering variant, with no stated change to the core 800 MHz bandwidth or 1200 V/us slew rate

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

AD8001ANZ زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Amplifier Type Current Feedback Amplifier
Number of Channels 1 channel
Bandwidth 800 MHz
Slew Rate 1200 V/us
Gain Flatness 0.1 dB to 100 MHz
Power Consumption 50 mW
Dual Supply Voltage Range Up to +/-6 V
Single Supply Voltage Range 6 V to 12 V
Nominal Operating Supply +/-5 V
آپریٹنگ درجہ حرارت رینج -40 C to +85 C
Input Bias Current 6 uA
Input Offset Voltage 5.5 mV
پیکیج 8-pin PDIP, 0.300 inch wide
ماؤنٹنگ ٹائپ Through-hole
Evaluation Board AD8001-EB
RoHS اسٹیٹس Compliant

AD8001ANZ پن کنفیگریشن

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
پن 1 NC — Not connected (per datasheet)
پن 2 -INPUT — Inverting input
پن 3 +INPUT — Non-inverting input
پن 4 V- — Negative supply connection
پن 5 NC — Not connected (per datasheet)
پن 6 OUTPUT — Amplified output
پن 7 V+ — Positive supply connection
پن 8 NC — Not connected (per datasheet)

عام استعمالات

AD8001ANZ کے لیے موزوں ہے 6 ایپلیکیشنs: High-Speed Video Signal Conditioning, Communications Receive Chains, High-Speed Instrumentation, Pulse and Edge Signal Conditioning, Active Filtering and Frequency Response Networks, Portable Test and Measurement Equipment.

📺

High-Speed Video Signal Conditioning

The AD8001ANZ fits video conditioning stages that need wide small-signal bandwidth and fast large-signal response. Its 800 MHz bandwidth, 1200 V/us slew rate, and 0.1 dB gain flatness to 100 MHz help preserve signal integrity through routing, buffering, and gain stages. The current-feedback architecture is particularly useful when differential gain and phase behavior matter more than conventional dc precision. With dual supplies up to +/-6 V, the amplifier can be placed after a video source while maintaining headroom for the expected signal amplitude. The main design trade-off is that feedback impedance must be selected according to the gain configuration rather than copied blindly from a voltage-feedback design.

🌐

Communications Receive Chains

Use the AD8001ANZ in communications front ends where the incoming signal must be amplified before digitization or further filtering. The 800 MHz bandwidth provides margin for high-data-rate signal paths, while the 1200 V/us slew rate reduces distortion when large transitions are present. Its approximately 50 mW power consumption is useful in compact communications equipment where every milliampere contributes to thermal design. The ±6 V maximum dual-supply specification and 6 V to 12 V single-supply range allow the amplifier to be used around modern low-voltage analog rails. Layout must keep the high-speed feedback loop compact and provide a low-inductivity ground path to avoid adding noise or instability.

🔧

High-Speed Instrumentation

The AD8001ANZ is appropriate for instrumentation buffers and active analog nodes that operate well above the bandwidth of ordinary precision op amps. Its 0.1 dB gain flatness to 100 MHz and 800 MHz bandwidth are valuable when the instrument must preserve amplitude and phase relationships across a broad measurement band. The transimpedance linearization circuitry also differentiates the device from general-purpose voltage-feedback amplifiers. Designers should still evaluate input-referred noise, offset behavior, and gain accuracy for the specific measurement, since those parameters are not optimized in the same way as in a precision amplifier. A short feedback path and careful grounding are essential at these frequencies.

⚡

Pulse and Edge Signal Conditioning

The AD8001ANZ can condition fast pulses and edge-rich signals because its 1200 V/us slew rate allows large output transitions to be generated with less distortion than slower general-purpose amplifiers. The 800 MHz bandwidth supports applications where the signal spectrum extends into the hundreds of megahertz. The device is intended for low-power, low-voltage operation, so a dual ±5 V arrangement is a typical starting point when the signal swing requires symmetrical headroom. The primary design risk is ringing or instability caused by incorrect feedback impedance, excessive capacitive loading, or long PCB traces. Validate the complete gain configuration with the manufacturer evaluation board before committing to a high-volume layout.

🎚️

Active Filtering and Frequency Response Networks

The AD8001ANZ is useful in active filter and frequency-response circuits where the amplifier must retain signal amplitude across a wide range of frequencies. Its gain flatness specification of 0.1 dB to 100 MHz gives a clear target for filter design, while the much higher 800 MHz bandwidth provides headroom for multi-pole networks and internal operating frequencies. The low 50 mW power consumption helps when several active stages are combined in a compact instrument. Because current-feedback amplifiers use impedance-defined feedback networks, component tolerances and parasitic capacitance can affect the response more than in a voltage-feedback implementation. Use short, symmetrical routing and verify the filter response across temperature and supply tolerance.

📊

Portable Test and Measurement Equipment

The AD8001ANZ is a reasonable choice for portable test and measurement equipment that needs high-speed amplification without the power draw of a larger video amplifier. Its industrial temperature range of -40 C to +85 C supports industrial laboratory environments, while the PDIP-8 package simplifies through-hole prototyping and instrument construction. The 800 MHz bandwidth and 1200 V/us slew rate enable measurement of faster edges than typical precision amplifiers can reproduce. The tradeoff is that the device requires careful high-frequency layout and is not intended to replace a precision amplifier for slow dc measurements. Use the AD8001-EB evaluation board to review the reference schematic and layout before adapting the circuit to a portable instrument.

What is the AD8001ANZ bandwidth and slew rate?
The AD8001ANZ provides 800 MHz bandwidth and a 1200 V/us slew rate. According to the Analog Devices AD8001 data sheet, these specifications make the device suitable for high-speed video, communications, and general-purpose signal-chain applications where large signal excursions must be reproduced with low distortion.
What type of amplifier is the AD8001ANZ?
The AD8001ANZ is a single current-feedback amplifier with transimpedance linearization circuitry. The Analog Devices AD8001 product page describes this architecture as providing excellent differential gain and phase performance in low-power video applications, while the data sheet lists 0.1 dB gain flatness to 100 MHz.
What supply voltage range does the AD8001ANZ support?
The AD8001ANZ operates from dual supplies of up to +/-6 V or from a single supply of 6 V to 12 V. The AD8001 data sheet specifically identifies +/-5 V as the nominal operating condition and describes the device as a low-power high-speed amplifier intended for low-voltage systems.
Is the AD8001ANZ suitable for video applications?
Yes, the AD8001ANZ is well suited to video applications because it combines 800 MHz bandwidth, 1200 V/us slew rate, and 0.1 dB gain flatness through 100 MHz. Analog Devices highlights the AD8001's transimpedance linearization circuitry for driving video loads with improved differential gain and phase performance on only 50 mW of power.
Where can I download the AD8001ANZ datasheet PDF?
The official AD8001ANZ data sheet is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD8001.pdf. The manufacturer product page also provides AD8001 documentation, evaluation-board information, and the AD8001-EB schematic and layout reference.
Where can I find the AD8001ANZ pinout?
The AD8001ANZ pinout is shown in the Analog Devices AD8001 data sheet and corresponds to the 8-pin PDIP configuration used by AD8001ANZ. Use the manufacturer pin-description table when assigning PCB tracks, particularly for the inverting input, non-inverting input, supply, and output connections.
What is the best drop-in replacement for AD8001ANZ?
AD8001AN is the closest same-family drop-in candidate identified for the AD8001ANZ because it is the same AD8001 series in the same PDIP package family. The AD8001ANZ is the industrial-temperature PDIP ordering code; verify the exact pinout, supply limits, and production requirements in the manufacturer documentation before substitution.
Can AD8001AN replace AD8001ANZ without PCB changes?
AD8001AN can be considered for a footprint-compatible substitution because it belongs to the same AD8001 series and is associated with the same PDIP package family. The AD8001ANZ specifies the industrial-temperature variant, so confirm the replacement's temperature grade, pin arrangement, and electrical ratings against the AD8001 data sheet before production use.
When should I choose the AD8001ANZ instead of a voltage-feedback amplifier?
Choose the AD8001ANZ when your signal path benefits from the current-feedback architecture, high bandwidth, and high slew rate, particularly in video or communications circuits. A voltage-feedback amplifier may be preferable for precision dc applications, unity-gain stability requirements, or designs where conventional feedback calculations are preferred.
Is the AD8001ANZ suitable for a 5 V single-supply design?
The AD8001ANZ is not specified for a 5 V single supply. The AD8001 data sheet specifies single-supply operation from 6 V to 12 V and dual-supply operation up to +/-6 V, so a 5 V-only design should use a different amplifier unless its signal swing, common-mode range, and supply requirements are independently verified.
How much power does the AD8001ANZ consume?
The AD8001ANZ is designed for approximately 50 mW of power consumption under its nominal low-voltage operating conditions. The Analog Devices product page identifies the AD8001 as a low-power high-speed amplifier, while distributor data lists approximately 70 mA operating current.
What is the AD8001ANZ operating temperature range?
The AD8001ANZ is specified for the industrial temperature range from -40 C to +85 C. Analog Devices states this range for the AD8001 family, and the AD8001ANZ ordering code is associated with the PDIP industrial-temperature configuration.
Does the AD8001ANZ need a heatsink?
The AD8001ANZ normally does not require a dedicated heatsink because its stated power consumption is approximately 50 mW at the nominal operating condition. Actual temperature rise depends on the supply voltage, output current, load, PCB copper area, and ambient temperature; estimate those values before applying the result to a specific design.
How do I compare the AD8001ANZ with a generic high-speed op amp?
Compare the AD8001ANZ using bandwidth, slew rate, gain flatness, power consumption, supply range, feedback impedance, and package rather than bandwidth alone. Its distinguishing combination is 800 MHz bandwidth, 1200 V/us slew rate, 0.1 dB flatness to 100 MHz, and approximately 50 mW power consumption in an 8-pin PDIP package.
Where can I buy the AD8001ANZ online?
Use the Request a Quote form on this page to request current AD8001ANZ availability, pricing, and lead time from XAIPART. The part is listed by authorized distribution channels and distributors, but inventory and commercial terms change by region and quantity, so confirm the current position through the quote form.
What is the price of the AD8001ANZ?
Current AD8001ANZ pricing and quantity availability should be requested through the Request a Quote form on this page. Commercial prices vary with order quantity, package, and market conditions, so use the form for a current quotation rather than relying on a historical listing price.
What is the lead time for the AD8001ANZ?
Request the current lead time through the Request a Quote form on this page, including the required quantity and delivery destination. Lead time varies with inventory, order volume, and manufacturing conditions, and the current quote response provides the applicable commercial commitment.

کے لیے انجینئرنگ ریفرنس ڈیٹا AD8001ANZ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the AD8001ANZ when the design requires a low-power, high-speed current-feedback amplifier in an 8-pin PDIP package, particularly for video, communications, instrumentation, or pulse-conditioning circuits. Its 800 MHz bandwidth, 1200 V/us slew rate, and 0.1 dB flatness to 100 MHz make it preferable to ordinary precision op amps when signal fidelity at high frequency is the priority. AD8001AN is the closest same-family alternative when the exact ordering code is unavailable or when the manufacturer confirms the required temperature and production configuration. Do not select a general-purpose voltage-feedback amplifier solely from bandwidth, because its feedback network, stability behavior, and distortion characteristics will differ. Before finalizing a replacement, confirm pinout, supply limits, temperature grade, feedback impedance, and the manufacturer reference layout.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ AD8001AN
Package 8-pin PDIP 8-pin PDIP
Brand Analog Devices Analog Devices
Amplifier Architecture Current Feedback Amplifier Current Feedback Amplifier
Number of Channels 1 1
Bandwidth 800 MHz 800 MHz
Slew Rate 1200 V/us 1200 V/us
Gain Flatness 0.1 dB to 100 MHz 0.1 dB to 100 MHz
Power Consumption 50 mW 50 mW
Supply Voltage Range Up to +/-6 V dual or 6 V to 12 V single Up to +/-6 V dual or 6 V to 12 V single
Operating Temperature Range -40 C to +85 C -40 C to +85 C

اہم امتیازی خصوصیات

  • High-speed current-feedback performance in a PDIP package (بمقابلہAD8001AN)
  • Low power for an 800 MHz amplifier (بمقابلہAD8001AN)
  • Video-oriented gain flatness (بمقابلہAD8001AN)

ڈیزائن نوٹس

Treat the AD8001ANZ feedback loop as a high-speed RF-style layout problem. Place the feedback resistor, inverting-input connection, and output connection on the same board region, minimize loop area, and keep the ground return short and continuous. Analog Devices specifically provides schematic and layout guidance for the AD8001-EB evaluation board; use it as the starting point for the production layout.

Decouple each supply rail directly at the device pins with low-inductance ceramic capacitance, and route the supply and ground connections away from sensitive input nodes. The AD8001 operates from up to +/-6 V dual supplies or 6 V to 12 V single supply, so verify the actual rail voltages and signal swing before selecting the bypass network. Estimated power consumption is approximately 50 mW at the nominal operating condition; confirm thermal rise in the final enclosure.

Do not assume that a current-feedback amplifier can use the same feedback resistor as a voltage-feedback amplifier. The correct feedback impedance depends on the gain setting and signal path, and incorrect values can produce ringing, overshoot, or oscillation. Check the AD8001 data sheet and AD8001-EB reference design for the selected gain configuration, then verify bandwidth and distortion on the assembled board.

تعمیل کی معلومات

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

RoHS status is listed as compliant in the product comparison data. The available documentation identifies the industrial temperature range and PDIP-8 package but does not provide complete REACH, halogen-free, conflict-minerals, or AEC-Q100 information for this ordering code.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-18 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

AD8001ANZ datasheet AD8001ANZ pinout AD8001ANZ datasheet pdf AD8001ANZ equivalent AD8001ANZ replacement AD8001ANZ drop-in replacement AD8001ANZ 800 MHz amplifier AD8001ANZ PDIP-8 AD8001ANZ current feedback amplifier AD8001ANZ video amplifier AD8001ANZ price AD8001ANZ stock Analog Devices AD8001AN AD8001ANZ schematic AD8001ANZ AD8001-EB

متعلقہ اجزاء اور اصطلاحات

Analog Devices AD8001ANZ AD8001AN current-feedback amplifier high-speed amplifier operational amplifier transimpedance linearization 800 MHz bandwidth 1200 V/us slew rate 0.1 dB gain flatness 50 mW power consumption +/-5 V supply +/-6 V dual supply 6 V to 12 V single supply PDIP-8 AD8001-EB evaluation board video amplification signal conditioning industrial temperature range -40 C to +85 C RoHS
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں